Search

The dynamic behaviour and dynamic phenomena in traction drives of railway vehicle has been studied for decades. Generally, in these days the motivation for this research is to look for answers related with service problems, which has been risen, e.g. an overloading of mechanical components as wheelsets or an intention to improve control systems of traction drives of railway vehicles. This problematic has also motivated the research at the Faculty of Mechanical Engineering at the Czech Technical University (CTU) in Prague. Nowadays it is also usual, that the main research tool has been a simulation based on a mathematical model of a railway vehicle or its specific components, as testing on real vehicles is very demanding regarding costs. However, there is an alternative - a roller rig. At the CTU in Prague there has been modernized the second roller rig for purposes of measurement regarding the torsion dynamics research, to support PhD students for their theses and possibly to extend the education for students oriented on the railway vehicle's design. This contribution brings results of measurements just from the problematics of torsion oscillations and dynamics. Specifically, further presented measurements are on the loss of the adhesion in the contact of the wheelset and rollers, as the substitution for the railway, its impact on the reaction rod overloading and study of the axle load influence on the transition phenomena. [ABSTRACT FROM AUTHOR]

The dynamic behaviour and dynamic phenomena in traction drives of railway vehicle has been studied for decades. Generally, in these days the motivation for this research is to look for answers related with service problems, which has been risen, e.g. an overloading of mechanical components as wheelsets or an intention to improve control systems of traction drives of railway vehicles. This problematic has also motivated the research at the Faculty of Mechanical Engineering at the Czech Technical University (CTU) in Prague. Nowadays it is also usual, that the main research tool has been a simulation based on a mathematical model of a railway vehicle or its specific components, as testing on real vehicles is very demanding regarding costs. However, there is an alternative – a roller rig. At the CTU in Prague there has been modernized the second roller rig for purposes of measurement regarding the torsion dynamics research, to support PhD students for their theses and possibly to extend the education for students oriented on the railway vehicle’s design. This contribution brings results of measurements just from the problematics of torsion oscillations and dynamics. Specifically, further presented measurements are on the loss of the adhesion in the contact of the wheelset and rollers, as the substitution for the railway, its impact on the reaction rod overloading and study of the axle load influence on the transition phenomena.

Within the research of electromagnetically excited torsion oscillations in the mechanical part of traction drive systems of modern railway vehicles, which has been realized at the Faculty of mechanical engineering at the CTU in Prague, there are two separate simulation models in use. The basic calculation model, which is utilized to gain basic characteristics of the torsion system as natural frequencies and natural modes of oscillations. And the complex simulation model, which simulates a drive of the vehicle. This contribution is focused on the basic calculation model, which has been built in MATLAB. This model in its first version did not apply the contact between wheels and rails. It was necessary to find out, if this simplification is relevant with respect to subsequent simulations within the complex simulation model and its results. Therefore, the contact interaction as a traction force in longitudinal direction in the wheel-rail contact was realized via the Kalker’s linear theory. This article deals with the comparison between models with and without the implementation of the wheel-rail contact and its influence on the damping within the torsion system and retuning of the torsion system.

From a societal point of view, there are growing demands to increase traffic safety and reduce the risk of accidents of rail and road vehicles. The research to increase the safety of railway vehicles, which is carried out at the Faculty of Mechanical Engineering of the Czech Technical University in Prague, aims to increase the active and passive safety of railway vehicles. Components and systems of active safety are designed to reduce the risk of an accident. Components and systems of passive safety are designed to minimize the consequences of accidents. One of the parts of the active safety of railway vehicles is the condition and safety of the railway lines on which the railway vehicle is operated. The first part of the article focuses on the evaluation of accident statistics of railway vehicles with other road users at railway crossings for the years 2014 to 2018 with regard to the cause of the accident and the level of security of railway crossings. The conclusion of the article is devoted to proposals for solutions that could lead to a reduction in accidents at railway crossings. [ABSTRACT FROM AUTHOR]

Within the research of electromagnetically excited torsion oscillations in the mechanical part of traction drive systems of modern railway vehicles, which has been realized at the Faculty of mechanical engineering at the CTU in Prague, there are two separate simulation models in use. The basic calculation model, which is utilized to gain basic characteristics of the torsion system as natural frequencies and natural modes of oscillations. And the complex simulation model, which simulates a drive of the vehicle. This contribution is focused on the basic calculation model, which has been built in MATLAB. This model in its first version did not apply the contact between wheels and rails. It was necessary to find out, if this simplification is relevant with respect to subsequent simulations within the complex simulation model and its results. Therefore, the contact interaction as a traction force in longitudinal direction in the wheel-rail contact was realized via the Kalker's linear theory. This article deals with the comparison between models with and without the implementation of the wheel-rail contact and its influence on the damping within the torsion system and retuning of the torsion system. [ABSTRACT FROM AUTHOR]

The importance of the railway transport of both goods and passengers continuously grows as it is in many points of view more ecological and economical solution in comparison with road transport. Just the importance has been supporting efforts to design more powerful and faster trains reaching traction powers more than 1.6 MW per a wheel-set or service top speed much more than 300 km/h till these days. To reach design which has enabled such a kind of performances it was necessary to research dynamic behaviour of railway vehicles. Both via laboratory measurements and simulations. The laboratory experiments have been carried out on a specially designed laboratory equipment called roller rigs. A laboratory equipped by roller rig for testing of the railway vehicle dynamic behaviour has been built at the Faculty of Mechanical Engineering at CTU in Prague, also within PhD study programs and SGS grants. Another powerful tool within research activities is a simulation. Kind of a such simulation will be presented by this contribution with the focus on the torsion dynamics of high-power fully-suspended drive of a railway vehicle, which has been developed also by PhD students under financial support of The Faculty of Mechanical Engineering and related grants.

From a societal point of view, there are growing demands to increase traffic safety and reduce the risk of accidents of rail and road vehicles. The research to increase the safety of railway vehicles, which is carried out at the Faculty of Mechanical Engineering of the Czech Technical University in Prague, aims to increase the active and passive safety of railway vehicles. Components and systems of active safety are designed to reduce the risk of an accident. Components and systems of passive safety are designed to minimize the consequences of accidents. One of the parts of the active safety of railway vehicles is the condition and safety of the railway lines on which the railway vehicle is operated. The first part of the article focuses on the evaluation of accident statistics of railway vehicles with other road users at railway crossings for the years 2014 to 2018 with regard to the cause of the accident and the level of security of railway crossings. The conclusion of the article is devoted to proposals for solutions that could lead to a reduction in accidents at railway crossings.

The importance of the railway transport of both goods and passengers continuously grows as it is in many points of view more ecological and economical solution in comparison with road transport. Just the importance has been supporting efforts to design more powerful and faster trains reaching traction powers more than 1.6 MW per a wheel-set or service top speed much more than 300 km/h till these days. To reach design which has enabled such a kind of performances it was necessary to research dynamic behaviour of railway vehicles. Both via laboratory measurements and simulations. The laboratory experiments have been carried out on a specially designed laboratory equipment called roller rigs. A laboratory equipped by roller rig for testing of the railway vehicle dynamic behaviour has been built at the Faculty of Mechanical Engineering at CTU in Prague, also within PhD study programs and SGS grants. Another powerful tool within research activities is a simulation. Kind of a such simulation will be presented by this contribution with the focus on the torsion dynamics of high-power fully-suspended drive of a railway vehicle, which has been developed also by PhD students under financial support of The Faculty of Mechanical Engineering and related grants. [ABSTRACT FROM AUTHOR]