Search

Injectable hydrogels (IHs) have demonstrated huge potential in promoting repair of infected bone defects (IBDs), but how to endow them with desired anti-bacterial, immunoregulatory, and osteo-inductive properties as well as avoid mechanical failure during their manipulation are challenging. In this regard, we developed a multifunctional AOHA-RA/Lap nanocomposite IH for IBDs repair, which was constructed mainly through two kinds of reversible cross-links: (i) the laponite (Lap) crystals mediated electrostatic interactions; (ii) the phenylboronic acid easter bonds between the 4-aminobenzeneboronic acid grafted oxidized hyaluronic acid (AOHA) and rosmarinic acid (RA). Due to the specific structural composition, the AOHA-RA/Lap IH demonstrated superior injectability, self-recoverability, spatial adaptation, and self-reinforced mechanical properties after being injected to the bone defect site. In addition, the RA molecules could be locally released from the hydrogel following a Weibull model for over 10 days. Systematic in vitro/vivo assays proved the strong anti-bacterial activity of the hydrogel against Staphylococcus aureus (S. aureu s) and Escherichia coli (E. coli). Moreover, its capability of inducing M 2 polarization of macrophages (M φ) and osteogenic differentiation of bone marrow stromal cells (BMSCs) was verified either, and the mechanism of the former was identified to be related to the JAK1-STAT1 and PI3K-AKT signaling pathways and that of the latter was identified to be related to the calcium signaling pathway, extracellular matrix (ECM) receptor interaction and TGF-β signaling pathway. After being implanted to a S. aureus infected rat skull defect model, the AOHA-RA/Lap IH significantly accelerated repair of IBDs without causing significant systemic toxicity. Rosmarinic acid and laponite were utilized to develop an injectable hydrogel, promising for accelerating repair of infected bone defects in clinic. The gelation of the hydrogel was completely driven by two kinds of reversible cross-links, which endow the hydrogel superior spatial adaption, self-recoverability, and structural stability. The as-prepared hydrogel demonstrated superior anti-bacterial/anti-biofilm activity and could induce M 2 polarization of macrophages and osteogenic differentiation of BMSCs. The mechanism behind macrophages polarization was identified to be related to the JAK1-STAT1 and PI3K-AKT signaling pathways. The mechanism behind osteogenic differentiation of BMSCs was identified to be related to the ECM receptor interaction and calcium signaling/TGF-β signaling pathways. [Display omitted] [ABSTRACT FROM AUTHOR]

The integration of barrier materials with pharmacological therapy is a promising strategy to treat intrauterine adhesions (IUAs). However, most of these materials are surgically implanted in a fixed shape and incongruence with the natural mechanical properties of the uterus, causing poor adaptability and significant discomfort to the patients. Herein, an injectable, biodegradable, and mechanically adaptive hydrogel loaded with platelet-rich plasma (PRP) is created by L‑serine and allyl functionalized chitosan (ACS) to achieve efficient, comfortable, and minimally invasive treatment of IUAs. L‑serine induces fast gelation and mechanical reinforcement of the hydrogel, while ACS introduces, imparting a good injectability and complaint yet strong feature to the hydrogel. This design enables the hydrogel to adapt to the complex geometry and match the mechanical properties of the uterine. Moreover, the hydrogel exhibits proper degradability, sustained growth factors (GFs) of PRP release ability, and good biocompatibility. Consequently, the hydrogel shows promising therapeutic efficacy by reducing collagen fiber deposition and facilitating endometrium cell proliferation, thereby restoring the fertility function of the uterus in an IUAs model of rats. Accordingly, the combination of L‑serine and ACS-induced hydrogel with such advantages holds great potential for treating IUAs. This research introduces a breakthrough in the treatment of intrauterine adhesions (IUAs) with an injectable, biodegradable and mechanically adaptive hydrogel using L‑serine and allyl functionalized chitosan (ACS). Unlike traditional surgical treatments, this hydrogel uniquely conforms to the uterus's geometry and mechanical properties, offering a minimally invasive, comfortable, and more effective solution. The hydrogel is designed to release growth factors from platelet-rich plasma (PRP) sustainably, promoting tissue regeneration by enhancing collagen fiber deposition and endometrium cell proliferation. Demonstrated efficacy in a rat model of IUAs indicates its great potential to significantly improve fertility restoration treatments. This advancement represents a significant leap in reproductive medicine, promising to transform IUAs treatment with its innovative approach to achieving efficient, comfortable, and minimally invasive therapy. [Display omitted] [ABSTRACT FROM AUTHOR]

The regenerative microenvironment after peripheral nerve injury is imbalanced and difficult to rebalance, which is mainly affected by inflammation, oxidative stress, and inadequate blood supply. The difficulty in remodeling the nerve regeneration microenvironment is the main reason for slow nerve regeneration. Traditional drug treatments have certain limitations, such as difficulty in penetrating the blood-nerve barrier and lack of pleiotropic effects. Therefore, there is an urgent need to build multifunctional nerve grafts that can effectively regulate the regenerative microenvironment and promote nerve regeneration. Nitric oxide (NO), a highly effective gas transmitter with diatomic radicals, is an important regulator of axonal growth and migration, synaptic plasticity, proliferation of neural precursor cells, and neuronal survival. Moreover, NO provides potential anti-inflammation, anti-oxidation, and blood vessel promotion applications. However, excess NO may cause cell death and neuroinflammatory cell damage. The prerequisite for NO treatment of peripheral nerve injury is that it is gradually released over time. In this study, we constructed an injectable NO slow-release system with two main components, including macromolecular NO donor nanoparticles (mPEG-P(MSNO-EG) nanoparticles, NO-NPs) and a carrier for the nanoparticles, mPEG-PA-PP injectable temperature-sensitive hydrogel. Due to the multiple physiological regulation of NO and better physiological barrier penetration, the conduit effectively regulates the inflammatory response and oxidative stress of damaged peripheral nerves, promotes nerve vascularization, and nerve regeneration and docking, accelerating the nerve regeneration process. The slow regeneration speed of peripheral nerves is mainly due to the destruction of the regeneration microenvironment. Neural conduits with drug delivery capabilities have the potential to improve the microenvironment of nerve regeneration. However, traditional drugs are hindered by the blood nerve barrier and cannot effectively target the injured area. NO, an endogenous gas signaling molecule, can freely cross the blood nerve barrier and act on target cells. However, excessive NO can lead to cell apoptosis. In this study, a NO sustained-release system was constructed to regulate the microenvironment of nerve regeneration through various pathways and promote nerve regeneration. [Display omitted] [ABSTRACT FROM AUTHOR]

Intrauterine adhesions (IUA) are the most common cause of uterine infertility, and conventional treatments have not consistently achieved satisfactory pregnancy rates. Stem cell therapy shows promising potential for the clinical treatment of IUA. Although various advanced biomaterials have been designed for delivering stem cells to the uterine cavity, there remain significant challenges, particularly in devising therapeutic strategies for clinical application that minimize surgical incisions and conform to the intricate structure of uterine cavity. Herein, an injectable hydrogel loaded with human umbilical cord-derived mesenchymal stem cells (UCMSCs) was synthesized via the Diels-Alder click reaction for endometrial regeneration and fertility restoration, exhibiting suitable mechanical properties, good biocompatibility, and desirable degradation properties. Notably, this hydrogel permitted minimally invasive administration and integrated seamlessly with surrounding tissue. Our study revealed that the UCMSCs-laden injectable hydrogel enhanced cell proliferation, migration, angiogenesis, and exhibited anti-fibrotic effects in vitro. The implantation of this hydrogel significantly facilitated endometrium regeneration and restored fertility in a rat endometrial damage model. Mechanistically, in vivo results indicated that the UCMSCs-laden injectable hydrogel effectively promoted macrophage recruitment and facilitated M2 phenotype polarization. Collectively, this hydrogel demonstrated efficacy in regenerating damaged endometrium, leading to the restoration of fertility. Consequently, it holds promise as a potential therapeutic strategy for endometrial damage and fertility decline arising from intrauterine adhesions. Severe endometrial traumas frequently lead to intrauterine adhesions and subsequent infertility. Stem cell therapy shows promising potential for the clinical treatment of IUA; however, challenges remain, including low delivery efficiency and compromised stem cell activity during the delivery process. In this study, we fabricated an injectable hydrogel loaded with UCMSCs via the Diels-Alder click reaction, which exhibited unique bioorthogonality. The in situ-gelling hydrogels could be introduced through a minimally invasive procedure and adapt to the intricate anatomy of the uterus. The UCMSCs-laden injectable hydrogel promoted endometrial regeneration and fertility restoration in a rat endometrial damage model, efficaciously augmenting macrophage recruitment and promoting their polarization to the M2 phenotype. The administration of UCMSCs-laden injectable hydrogel presents a promising therapeutic strategy for patients with severe intrauterine adhesion. [Display omitted] [ABSTRACT FROM AUTHOR]

Chronic diabetic wounds are a severe complication of diabetes, often leading to high treatment costs and high amputation rates. Numerous studies have revealed that nitric oxide (NO) therapy is a promising option because it favours wound revascularization. Here, base-paired injectable adhesive hydrogels (CAT) were prepared using adenine- and thymine-modified chitosan (CSA and CST). By further introducing S-nitrosoglutathione (GSNO) and binary l -arginine (bArg), we obtained a NO sustained-release hydrogel (CAT/bArg/GSON) that was more suitable for the treatment of chronic wounds. The results showed that the expression of HIF-1α and VEGF was upregulated in the CAT/bArg/GSON group, and improved blood vessel regeneration was observed, indicating an important role of NO. In addition, the research findings revealed that following treatment with the CAT/bArg/GSON hydrogel, the viability of Staphylococcus aureus and Escherichia coli decreased to 14 ± 2 % and 6 ± 1 %, respectively. Moreover, the wound microenvironment was improved, as evidenced by a 60 ± 1 % clearance of DPPH. In particular, histological examination and immunohistochemical staining results showed that wounds treated with CAT/bArg/GSNO exhibited denser neovascularization, faster epithelial tissue regeneration, and thicker collagen deposition. Overall, this study proposes an effective strategy to prepare injectable hydrogel dressings with dual NO donors. The functionality of CAT/bArg/GSON has been thoroughly demonstrated in research on chronic wound vascular regeneration, indicating that CAT/bArg/GSON could be a potential option for promoting chronic wound healing. This article prepares a chitosan hydrogel utilizing the principle of complementary base pairing, which offers several advantages, including good adhesion, biocompatibility, and flow properties, making it a good material for wound dressings. Loaded GSNO and bArg can steadily release NO and l -arginine through the degradation of the gel. Then, the released l -arginine not only possesses antioxidant properties but can also continue to generate a small amount of NO under the action of NOS. This design achieves a sustained and stable supply of NO at the wound site, maximizing the angiogenesis-promoting and antibacterial effects of NO. More neovascularization and abundant collagen were observed in the regenerated tissues. This study provides an effective repair hydrogel material for diabetic wound. [Display omitted] [ABSTRACT FROM AUTHOR]

Immunotherapy is an emerging antitumor modality with high specificity and persistence, but its application for resected tumor treatment is impeded by the low availability of tumor-specific antigens and strong immunosuppression in the wound margin. Here a nanoengineered hydrogel is developed for eliciting robust cooperative ferroptosis-immunotherapeutic effect on resected tumors. Specifically, β-cyclodextrin (β-CD) is first grafted onto oxidized sodium alginate (OSA) through Schiff base ligation, which could trap cRGD-modified redox-responsive Withaferin prodrugs (WA-cRGD) to obtain the hydrogel building blocks (Gel@WA-cRGD). Under Ca2+-mediated crosslinking, Gel@WA-cRGD rapidly forms physiologically stable hydrogels, of which the porous network is used to deliver programmed cell death ligand 1 antibodies (aPD-L1). After injection into the post-surgical wound cavity, the β-CD-entrapped WA-cRGD is detached by the local acidity and specifically internalized by residual tumor cells to trigger ferroptosis, thus releasing abundant damage-associated molecular patterns (DAMPs) and tumor-derived antigens for activating the antigen-presenting cell-mediated cross-presentation and downstream cytotoxic T cell (CTL)-mediated antitumor responses. Furthermore, aPD-L1 could block PD-1/PD-L1 interaction and enhance the effector function of CTLs to overcome tumor cell-mediated immunosuppression. This cooperative hydrogel-based antitumor strategy for ferroptosis-immunotherapy may serve as a generally-applicable approach for postoperative tumor management. To overcome the immunosuppressive microenvironment in resected solid tumors for enhanced patient survival, here we report a nanoengineered hydrogel incorporated supramolecular redox-activatable Withaferin prodrug and PD-L1 antibody, which could elicit robust cooperative ferroptosis-immunotherapeutic effect against residual tumor cells in the surgical bed to prevent tumor relapse, thus offering a generally-applicable approach for postoperative tumor management. [Display omitted] [ABSTRACT FROM AUTHOR]

The use of anti-inflammatory strategies has the potential to be a definitive treatment for ventricular remodeling post myocardial infarction (MI). The regulation of macrophage phenotypes by anti-inflammatory agents contributes to the alleviation of myocardial fibrosis. However, their poor retention rates severely affect treatment efficacy. Here, we propose a supramolecular compound, NapFFY, to co-assemble with IL-10 and SN50 as a novel anti-inflammatory SN50/IL - 10/NapFFY hydrogel with cardioprotective properties. Results from the in vitro and in vivo experiments in murine cell line and rats, respectively, demonstrated that the SN50/IL-10/NapFFY hydrogel exhibits an ideal and sustained release of IL-10 and SN50. Intramyocardial injection of the SN50/IL-10/NapFFY hydrogel in a rat model of MI significantly inhibited the expression of proinflammatory cytokines. It promoted the polarization of M2 macrophages, which reduced cardiomyocyte apoptosis and improved vascularization at the border zones. Specifically, the SN50/IL-10/NapFFY hydrogel significantly improved heart function and ameliorated ventricular remodeling 28 days post MI. We envision that the SN50/IL-10/NapFFY hydrogel could serve as a new anti-inflammatory agent for the clinical treatment of MI in future studies. Anti-inflammation is an ideal strategy for the treatment of ventricular remodeling post myocardial infarction (MI). SN50 and IL-10 have been shown to have diverse roles in antiinflammatory process, respectively. However, direct intravenous administration or intramyocardial injection of SN50 or IL-10 is not a viable option given its poor half-life in vivo. This study aimed to evaluate the synergistic cardioprotective effects of a supramolecular hydrogel loaded with an NF-κB inhibitor (SN50) and IL-10. Animal experiments showed that the SN50/IL-10/NapFFY hydrogels ameliorated the inflammatory microenvironment, and improved cardiac function to the infarct area in a rat model of MI. We anticipate that SN50/IL10NapFFY hydrogel could be used clinically to treat MI in the near future. [Display omitted] [ABSTRACT FROM AUTHOR]

Extracellular matrix (ECM) provides various types of direct interactions with cells and a dynamic environment, which can be remodeled through different assembly/degradation mechanisms to adapt to different biological processes. Herein, through introducing polyphosphate-modified hyaluronic acid and bioactive glass (BG) nano-fibril into a self-assembled hydrogel system with peptide-polymer conjugate, we can realize many new ECM-like functions in a synthetic polymer network. The hydrogel network formation is mediated by coacervation, followed by a gradual transition of peptide structure from α-helix to β-sheet. The ECM-like hydrogels can be degraded through a number of orthogonal mechanisms, including treatments with protease, hyaluronidase, alkaline phosphatase, and calcium ion. As 2D coating, the ECM-like hydrogels can be used to modify the planar surface to promote the adhesion of mesenchymal stromal cells, or to coat the cell surface in a layer-by-layer fashion to shield the interaction with the substrate. As ECM-like hydrogels for 3D cell culture, the system is compatible with injection and cell encapsulation. Upon incorporating fragmented electrospun bioactive glass nano-fibril into the hydrogels, the synergetic effects of soft hydrogel and stiff reinforcement nanofibers on recapitulating ECM functions result in reduced cell circularity in 3D. Finally, by injecting the ECM-like hydrogels into mice, gradual degradations over a time period of one month and high biocompatibility have been shown in vivo. The contribution of complex network dynamics and hierarchical structures to cell-biomatrix interaction can be investigated multi-dimensionally, as many mechanisms are orthogonal to each other and can be regulated individually. A list of native ECM features has attracted the most interest and attention in the research of synthetic biomaterials. In this research, we have described a simple ECM-like hydrogel system in which the complex and elegant functions of native ECM can be recapitulated in a chemically defined synthetic system. The ECM-like hydrogel systems were developed to avoid undesired features of biological substances (e.g., ethical concerns, batch-to-batch variation, immunogenicity, and potential risk of contamination), as well as gaining new functions to facilitate bioengineering applications (e.g., 3D cell culture, injection, and high stability). To this end, we have developed an ECM-like hydrogel system and provide evidence that this purely synthetic biomaterial is a promising candidate for cell bioengineering applications. [Display omitted] [ABSTRACT FROM AUTHOR]

Wound treatment is largely influenced by pre-existing hypoxic microenvironments and biofilms, which can severely diminish the efficacy of phototherapy, suggesting the importance of multifunctional nanoplatforms for synergistic treatment of wound infections. Here, we developed a multifunctional injectable hydrogel (PSPG hydrogel) by loading photothermal sensitive sodium nitroprusside (SNP) into Pt-modified porphyrin metal organic framework (PCN) and in situ modification of gold particles to form a near-infrared (NIR) light-triggered all-in-one phototherapeutic nanoplatform. The Pt-modified nanoplatform exhibits a remarkable catalase-like behavior and promotes the continuous decomposition of endogenous H 2 O 2 into O 2 , thereby enhancing the photodynamic therapy (PDT) effect under hypoxia. Under dual NIR irradiation, PSPG hydrogel can not only produce hyperthermia (η=89.21%) but also generate reactive oxygen species and trigger NO release, contributing jointly to removal of biofilms and disruption of the cell membranes of methicillin-resistant Staphylococcus aureus (MRSA) and Escherichia coli (E. coli). In vivo experiments demonstrated a 99.9% reduction in bacterial burden on wounds. Additionally, PSPG hydrogel can accelerate MRSA-infected and Pseudomonas aeruginosa -infected (P. aeruginosa -infected) wound healing by promoting angiogenesis, collagen deposition, and suppressing inflammatory responses. Furthermore, in vitro and in vivo experiments revealed that PSPG hydrogel has good cytocompatibility. Overall, we proposed an antimicrobial strategy to eliminate bacteria through the synergistic effects of gas-photodynamic-photothermal killing, alleviating hypoxia in the bacterial infection microenvironment, and inhibiting biofilms, offering a new way against antimicrobial resistance and biofilm-associated infections. The NIR light-triggered multifunctional injectable hydrogel nanoplatform (PSPG hydrogel) based on Pt-decorated gold nanoparticles with sodium nitroprusside (SNP)-loading porphyrin metal organic framework (PCN) as inner templates can efficiently perform photothermal conversion (η=89.21%) to trigger NO release from SNP, while continuously regulating the hypoxic microenvironment at the bacterial infection site through Pt-induced self-oxygenation, achieving efficient sterilization and removal of biofilm by synergistic PDT and PTT phototherapy. In vivo and in vitro experiments demonstrated that the PSPG hydrogel has significant anti-biofilm, antibacterial, and inflammatory regulatory functions. This study proposed an antimicrobial strategy to eliminate bacteria through the synergistic effects of gas-photodynamic-photothermal killing, alleviating hypoxia in the bacterial infection microenvironment, and inhibiting biofilms. [Display omitted] [ABSTRACT FROM AUTHOR]

Routine wound management faces significant challenges including rebleeding and bacterial infection that affect millions of people each year. However, conventional wound dressings (e.g., gauze, bandage) are limited to simply cover the injured surfaces and rarely show special functionality to promote the wound recovery. Currently, injectable hydrogels have been widely designed as multifunctional wound dressings to manage the hemostatic and wound healing process. Nevertheless, the integration of multiple functions through simple composition and easy construction is still difficult and hardly achieved. Herein, we reported a bioinspired multifunctional injectable hydrogel (CQCS@gel) consisted of only two components, catechol-functionalized quaternized chitosan (CQCS) and dibenzaldehyde-terminated poly(ethylene glycol) (DB-PEG 2000). The building blocks endowed CQCS@gel with tissue-adhesive, antibacterial, antioxidant, self-healing and pH-responsive properties. Based on the in vivo hemostatic study, quick hemostasis for acute tissue injuries such as liver and carotid wounds was realized owing to the rapid gelation rate and strong tissue-adhesiveness of CQCS@gel. Moreover, CQCS@gel remarkably boosted the chronic recovery process of MRSA-infected cutaneous wounds by promoting collagen deposition, hair follicles regeneration and angiogenesis. Overall, this multifunctional injectable hydrogel shows potentials as a universal wound dressing in clinical applications, enabling both hemostasis and infected wound management. This is the first report showing the multifunctional injectable hydrogel (CQCS@gel) consisted of catechol-functionalized quaternized chitosan and dibenzaldehyde-terminated poly(ethylene glycol). The incorporation of quaternary ammonium groups imparted the CQCS@gel with outstanding contact-active bacterial killing efficiency and the catechol moieties enhanced its tissue adhesive and antioxidant properties. Moreover, the reversible imine crosslinks endowed the CQCS@gel with self-healing and pH-responsive drug release capabilities. These multiple functions were integrated into a single injectable hydrogel system with easy availability and low cost. In vitro and in vivo results showed that the newly designed hydrogel was biocompatible, realized successful sealing hemostasis under multiple bleeding scenarios and enabled accelerated healing of infected skin wounds. [Display omitted] [ABSTRACT FROM AUTHOR]

The management of wound infection remains the major challenges in real-time diagnosis, effective bacterial elimination and rapid wound healing. Herein, we developed injectable theranostic hydrogels to achieve long-term visual imaging of infected wounds and possible infection recurrence and to launch an on-demand bactericidal effect without using any antibiotics. Antimicrobial peptide ε-polylysine (ePL)-derived hydrogels were prepared through the copolymerization of methacrylated ePL (mPL) and the conjugates with tetrakis(4-carboxyphenyl) porphyrin (mPL-TCPP) and phenol red (mPL-Pr). Light illumination of mPL-TCPP produces reactive oxidative species (ROS) to initiate free radical crosslinking into PL@Pr-TCPP hydrogels without using any additional photoinitiators and concurrently exhibits antibacterial photodynamic therapy (PDT). PL@Pr-TCPP hydrogels experience quick color changes from yellow to orange and finally to red when pH values change from 5.0 to 9.0. The actual pH and related bacterial levels in the wounds could be read from G/B signal ratios of hydrogel colors captured by a smart phone. The conjugation of phenol red and TCPP into hydrogels affords a robust bacterial infection diagnosis and persistent bactericidal effect after cycled light illumination. The bacterial capture by ePL hydrogels strengthens PDT effect through alleviating the short lifetime and action distance of ROS. On a Staphylococcus aureus -infected abscess model, light illumination of the pregel solutions achieves in situ formation of hydrogel dressings. The synergistic bactericidal performance significantly relieves inflammatory status, accelerates collagen deposition, and promotes neovascularization, leading to full recovery of the infected wounds with regeneration of skin accessories. PL@Pr-TCPP hydrogels on the wound bed show color changes upon the recurrence of bacterial infection, which could also be totally eliminated after light illumination. Therefore, this study demonstrates a feasible strategy to develop theranostic hydrogel dressings for life-cycle diagnosis and on-demand treatment of wound infections. Over 30% of skin and soft tissue infections become chronic even after appropriate antibacterial treatment, and recurrent infections are commonly reported after initial infection. Challenges remain in the development of theranostic wound dressings having the capability of point-of-care diagnosis, life-cycle monitoring and on-demand elimination of bacterial infection. Herein, light-triggered gelation is used to develop theranostic hydrogels for reversible naked-eye diagnosis and on-demand photodynamic therapy of wound infections. Light illumination plays a "one-stone-two-birds" role, i.e., photodynamically produced reactive oxidative species enable bactericidal effect without using any antibiotics, and the generated free radicals initiate crosslinking of hydrogels without using any additional photoinitiators. Bacterial infection-activated color changes of hydrogels could be captured with a smart phone for on-site and persistent monitoring of bacterial infection and wound healing process. [Display omitted] [ABSTRACT FROM AUTHOR]

Piezoelectric, conductive, and injectable hydrogel (SPG hydrogel) is constructed to rapidly close wounds, efficiently harvest biomechanical energy from animal motion, and generate electrical stimulation for electrotherapy of wound healing. 3-amino-4-methoxybenzoic acid (AMB) monomer was polymerized and grafted onto the gelatin, which was further crosslinked using EDC/NHS and embedded with strontium titanate nanoparticles (80.5 wt%), forming SPG hydrogel. This SPG hydrogel had high tissue adhesion ability, and could generate the output voltage (maximum output voltage 1 V) and current (maximum output current 0.5 nA) upon mechanical bending, promoting NIH-3T3 cell migration and proliferation. Upon application to the mice wound model, the SPG hydrogel rapidly closed the skin wound, smoothed the wound's appearance, reduced the remaining wound size, and increased epidermal thickness, demonstrating remarkable wound healing capabilities. This study suggests that the body motion-promoted electrotherapy offers a promising strategy for wound healing. STATEMENT OF SIGNIFICANCE: Piezoelectric nanomaterials are often incorporated into hydrogels to create piezoelectric hydrogels for wound healing. However, piezoelectric nanomaterials tend to agglomerate within the hydrogel matrix, and the hydrogel's low conductivity hinders efficient electron transfer. Together, both factors significantly reduce the piezoelectric effect. In this study, we developed an SPG hydrogel to improve the homogeneity and conductivity of the piezoelectric hydrogel. We first designed a conductive PG hydrogel and then immoblized piezoelectric STO nanoparticles within its matrix through coordination chemistry. Upon mechanical deformation, the uniformly distributed STO nanoparticles can generate electricity, which can efficiently transfer through the conductive matrix to the hydrogel's surface. This design shows great potential for wound healing applications., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

Uncontrolled bleeding from internal noncompressible wounds is a major cause of prehospital death in military personnel and civilian populations. An ideal hemostatic sealant for emergency care should quickly control blood loss and be removed without debridement for the follow-up treatment in the operating room, yet the lack of suitable materials to meet both requirements is the bottleneck. Herein, we suggest an injectable and dissolvable hydrogel sealant for hemorrhage management of noncompressible wounds. To this end, a 4-arm poly(ethylene glycol) (PEG) crosslinker modified with thioester linkages and terminated with aldehyde groups is designed and synthesized, and to modulate the gel properties and make it suitable as a hemostatic sealant, a mixed amino component composed of poly(ethylene imine) and adipic dihydrazide is employed to react with the PEG crosslinker to form the adhesive and elastic sealant for the first time. The aldehyde groups provide the adhesion to the tissues, and the amino component affords the procoagulant ability. More importantly, the thioester moieties allow the on-demand dissolution of sealant via a thiol-thioester exchange reaction upon exposure to an exogenous thiolate solution. In the rat femoral artery puncture and liver injury models, the administration of the hydrogel sealant dramatically reduces blood loss, and its subsequent removal does not induce rebleeding. Consequently, this hydrogel sealant with the unique feature of on-demand dissolution can not only efficiently control bleeding in emergent scenarios, but also allow non-traumatic re-exposure of wounds during subsequent surgical care. Sealants, adhesives or hemostatic dressings currently used in emergency situations not only require manual pressure to control bleeding, but also face removal by cutting and mechanical debridement to enable eventual surgical treatment. In this study, we design and develop an injectable and adhesive hydrogel sealant with good procoagulant capacity and on-demand dissolution feature. The application of the hydrogel sealant substantially reduces bleeding from internal noncompressible wounds without the need for direct pressure, and demonstrates for the first time that its controlled removal without debridement does not cause rebleeding. Considering that there are currently no commercial wound sealant systems with the feature of on-demand dissolution, the hydrogel sealant developed by us is expected to address an unmet clinical need. [Display omitted] [ABSTRACT FROM AUTHOR]

Metal-organic framework (MOF) is an exciting class of porous biomaterials that have been considered as a carrier to store and deliver therapeutic drugs. However, similar to other nanomaterials, the application of MOF in clinical settings is still limited because of premature diffusion of their payloads and tissue off-targeting behavior. To overcome these challenges, we designed an MOF-based hydrogel with structurally dynamic properties, i.e. , self-healing and shear-thinning, as an injectable localized drug delivery platform. The drug-encapsulating MOF hydrogel is formed through a dynamic coordination bond cross-linkage between a doxorubicin-loaded MOF (MOF@DOX) particle and a homemade bisphosphonate-modified hyaluronic acid (HA-BP) polymeric binder. The HA-BP·MOF@DOX hydrogel demonstrates pH- and ATP-responsive drug release characteristic and efficiently kills cancer cells in vitro. The animal experiments reveal that the HA-BP·MOF@DOX hydrogel has enhanced capability in terms of tumor growth suppression as compared to the MOF@DOX group, which can be attributed to drug localization in hydrogel superstructure and sustained release at the tumor site. The presented injectable dynamic MOF-based hydrogel is a promising in vivo localized drug delivery system for cancer treatment. Herein, we report the self-healing and shear-thinning of MOF-based drug carrier cross-linked by coordinate bonds for the first time and provide new insights and a facile chemical strategy for designing and fabricating MOF-based biomaterials by using bisphosphonate-zinc interaction. Bisphosphonate-zinc interaction is a facile chemical strategy to cross-link metal-organic framework (MOF)-based hydrogel. The presented MOF-based hydrogel demonstrates structurally dynamic properties, including smooth injectability, self-healing, and shear-thinning. The developed MOF-based hydrogel possesses pH- and ATP-responsive drug release characteristic and kills cancer cells in vitro efficiently. The dynamic MOF-based hydrogel shows enhanced in vivo anticancer activity as compared to pure MOF particles. Self-healing and shear-thinning of metal-ligand cross-linked MOF-based drug delivery system are reported for the first time, thus providing new insights for the design and fabrication of MOF-based biomaterials. [Display omitted] [ABSTRACT FROM AUTHOR]

Glioblastoma multiforme (GBM) is an aggressive primary brain cancer and although patients undergo surgery and chemoradiotherapy, residual cancer cells still migrate to healthy brain tissue and lead to tumor relapse after treatment. New therapeutic strategies are therefore urgently needed to better mitigate this tumor recurrence. To address this need, we envision after surgical removal of the tumor, implantable biomaterials in the resection cavity can treat or collect residual GBM cells for their subsequent eradication. To this end, we systematically characterized a poly(ethylene glycol)-based injectable hydrogel crosslinked via a thiol-Michael addition reaction by tuning its hydration level and aqueous NaHCO 3 concentration. The physical and chemical properties of the different formulations were investigated by assessing the strength and stability of the polymer networks and their swelling behavior. The hydrogel biocompatibility was assessed by performing in vitro cytotoxicity assays, immunoassays, and immunocytochemistry to monitor the reactivity of astrocytes cultured on the hydrogel surface over time. These characterization studies revealed key structure-property relationships. Furthermore, the results indicated hydrogels synthesized with 0.175 M NaHCO 3 and 50 wt% water content swelled the least, possessed a storage modulus that can withstand high intracranial pressures while avoiding a mechanical mismatch, had a sufficiently crosslinked polymer network, and did not degrade rapidly. This formulation was not cytotoxic to astrocytes and produced minimal immunogenic responses in vitro. These properties suggest this hydrogel formulation is the most optimal for implantation in the resection cavity and compatible toward GBM therapy. Survival times for glioblastoma patients have not improved significantly over the last several decades, as cancer cells remain after conventional therapies and form secondary tumors. We characterized a biodegradable, injectable hydrogel to reveal structure-property relationships that can be tuned to conform the hydrogel toward glioblastoma therapy. Nine formulations were systematically characterized to optimize the hydrogel based on physical, chemical, and biological compatibility with the glioblastoma microenvironment. This hydrogel can potentially be used for adjuvant therapy to glioblastoma treatment, such as by providing a source of molecular release for therapeutic agents, which will be investigated in future work. The optimized formulation will be developed further to capture and eradicate glioblastoma cells with chemical and physical stimuli in future research. [Display omitted] [ABSTRACT FROM AUTHOR]

Severe skin injuries are hard to repair and susceptible to bacterial infection. Development of a versatile antimicrobial anti-inflammatory hydrogel dressing that eliminates concern over antibiotic resistance is urgently needed but remains an elusive goal. Our research, described herein, the design and fabrication of a new family of supramolecular hydrogels based on hydroxypropyl chitosan (HPCS) and poly(N-isopropylacrylamide) (PNIPAM) may prove to be that goal. Employing the reversible cross-linking by β-cyclodextrin (β-CD) and adamantyl (AD) pre-assembly, the hydrogels can be formed in a facile one-pot method. Additionally, the structure and performance of the hydrogels can be controlled by a simple adjustment of the AD content. The obtained hydrogels exhibit an abundance of desired properties; they are injectable, thermosensitive, highly ductile, self-healable (will self-heal recurring damage to the hydrogel bandage of up to several millimeters wide), biocompatible, and have antimicrobial activity against Staphylococcus aureus when infused with dipotassium glycyrrhizinate (DG). Using a mouse full-thickness skin defect model, in vivo wound healing evaluations revealed that the DG-loaded hydrogels (HP-3/DG10) applied to the wound resulted in rapid wound closure. The hydrogels promoted efficient tissue remolding, collagen deposition, decreased inflammation and performed better than the control groups of commercial TegadermTM film and 3M dressing. Given their multifunctionality and in vivo efficacy, the DG-loaded HP hydrogels hold great potential as a wound dressing for full-thickness skin repair. Injectable hydrogels are receiving increasing attention as an ideal wound dressing. To the best of our knowledge, however, injectable and wide-crack self-healing hydrogel dressings have been hardly studied. A versatile antimicrobial hydrogel without drug resistance or cytotoxicity is also highly required. Therefore, in the present study, we constructed injectable thermosensitive and wide-crack self-healing hydrogels with antibacterial and anti-inflammatory properties. These hydrogels were developed through novel strategies of the wide-crack self-healing design and the loading of the bioactive antibacterial and anti-inflammatory agent dipotassium glycyrrhizinate. The simple preparation method and multifunctionality of the studied hydrogel composites may provide important insights for the development of future biomaterials for wound dressings and other biomedical applications. [Display omitted] [ABSTRACT FROM AUTHOR]

Tumor local chemotherapy employing injectable hydrogel reservoirs is a promising platform to achieve precise drug administration. However, balanced injectability, pH-responsiveness and long-term hydrolysis resistance of self-healing hydrogels remain appealing challenges. Herein, a modular preassembly strategy combining host-guest interactions with dynamic acylhydrazone bonds, was exploited to fabricate injectable cellulose-based hydrogels (CAAs) dressed with self-healing properties, pH-responsiveness and hydrolytic degradation resistance. Attributed to the host-guest interaction between β-cyclodextrin (CD) and 1-adamantane (AD), the hydrogels exhibited injectability, self-healing properties (healing efficiency of 97.5%) and rapid recovery (< 10 min) without external stimuli in physiological environment. Moreover, the hydrogels equipped with dynamic acylhydrazone linkages underwent slow hydrolytic degradation (> 30 days) and pH-responsive behavior, endowing the hydrogels with precise spatiotemporal drug release administration. The in vivo application of CAA as a carrier was studied using doxorubicin (DOX) model drug, and the results shows that using CAA as DOX carrier not only greatly enhances the anti-tumor efficacy of DOX, but also reduced the side effects of DOX. With the preassemble approach combining host-guest interactions with dynamic acylhydrazone bonds, this work demonstrated a multi-functional self-healing hydrogel as drug carrier developed by using natural polysaccharides, which offers a new avenue for the high-value utilization of biomass. The strategy demonstrated in the present work may also supply a pathway for the preparation and regulation of hydrogels as intelligent biomedicine materials. [Display omitted] [ABSTRACT FROM AUTHOR]

Currently there are no potential curative therapies that can improve the central nervous system (CNS) regeneration after traumatic injuries or diseases. Indeed, the regeneration of CNS is greatly impaired by limited drug penetration across the blood brain barrier (BBB), poor drug targeting, deficient progenitor neural cells and limited proliferation of mature neural cells. To overcome these limitations, bioengineered injectable hydrogels in combination with drug and cell therapy have been proposed to mimic the complexity of the CNS microenvironment and architecture. Additionally, to enhance relevant CNS regeneration, proper biophysical and biochemical cues are needed. Recently, great efforts have been devoted to tailor stimuli-responsive hydrogels as novel carrier systems which are able to guide neural tissue regeneration. This review provides an extensive overview on the most promising injectable hydrogels for neural tissue engineering. A special emphasis is made to highlight the ability of these hydrogels to deliver bioactive compounds/cells upon the exposure to internal and external stimuli. Bioactive injectable hydrogels have a broad application in central nervous system's (CNS) regeneration. This review gives an overview of the latest pioneering approaches in CNS recovery using stimuli-responsive hydrogels for several neurodegenerative disorders. This review summarizes the latest innovations on bioactive injectable hydrogels, focusing on tailoring internal/external stimuli-responsive hydrogels for the new injectable systems design, able to guide neural tissue response. The purpose is to highlight the advantages and the limitations of thermo-responsive, photo responsive, magnetic responsive, electric responsive, ultrasound responsive and enzymes-triggered injectable hydrogels in developing customizable neurotherapies. We believe that this comprehensive review will help in identifying the strengths and gaps in the existing literature and to further support the use of injectable hydrogels in stimulating CNS regeneration. [Display omitted] [ABSTRACT FROM AUTHOR]

Recently, injectable conducting polymer-based hydrogels (CPHs) have received increasing attention in tissue engineering owing to their controlled conductivity and minimally invasive procedures. Conducting polymers (CPs) are introduced into hydrogels to improve the electrical integration between hydrogels and host tissues and promote the repair of damaged tissues. Furthermore, endowing CPHs with in situ gelation or shear-thinning properties can reduce the injury size and inflammation caused by implanted surgery materials, which approaches the clinical transformation target of conductive biomaterials. Notably, functional CPs, including hydrophilic CP complexes, side-chain modified CPs, and conducting graft polymers, improve the water-dispersible and biocompatible properties of CPs and exhibit significant advantages in fabricating injectable CPHs under physiological conditions. This review discusses the recent progress in designing injectable hydrogels based on functional CPs. Their potential applications in neurological treatment, myocardial repair, and skeletal muscle regeneration are further highlighted. Conducting polymer-based hydrogels (CPHs) have broad application prospects in the biomedical field. However, the low water dispersibility and processability of conducting polymers (CPs) make them challenging to form injectable CPHs uniformly. For the first time, this review summarizes the functionalization strategies to improve the hydrophilicity and biocompatibility of CPs, which provides unprecedented advantages for designing and fabricating the physical/chemical crosslinked injectable CPHs. Besides, future challenges and prospects for further clinical transformation of injectable CPHs for tissue engineering are presented. This review's content is of great significance for the treatment of electroactive tissues with limited self-regeneration, including neurological treatment, myocardial repair, and skeletal muscle regeneration. Therefore, it is inspiring for the tissue engineering research of biomaterials and medical practitioners. [Display omitted] [ABSTRACT FROM AUTHOR]

Critical bone defects are a common yet challenging orthopedic problem. Tissue engineering is an emerging and promising strategy for bone regeneration in large-scale bone defects. The precise on-demand release of osteogenic factors is critical for controlling the osteogenic differentiation of seed cells with the support of appropriate three dimensional scaffolds. However, most of the effective osteogenic factors are biomacromolecules with release behaviors that are difficult to control. Here, the cholesterol-modified non-coding microRNA Chol-miR-26a was used to promote the osteogenic differentiation of human mesenchymal stem cells (hMSCs). Chol-miR-26a was conjugated to an injectable poly(ethylene glycol) (PEG) hydrogel through an ultraviolet (UV)-cleavable ester bond. The injectable PEG hydrogel was formed by a copper-free click reaction between the terminal azide groups of 8-armed PEG and dibenzocyclooctyne-biofunctionalized PEG, into which UV-cleavable Chol-miR-26a was simultaneously conjugated via a Michael addition reaction. Upon UV irradiation, Gel-c-miR-26a (MLCaged) released Chol-c-miR-26a selectively and exhibited significantly improved efficacy in bone regeneration compared to the hydrogel without UV irradiation and UV-uncleavable MLControl. MLCaged significantly enhanced alkaline phosphatase activity and promoted calcium nodule deposition in vitro and repaired critical skull defects in a rat animal model, demonstrating that injectable implantation with the precise release of osteogenic factors has the potential to repair large-scale bone defects in clinical practice. Provide a novel and practical strategy via hydrogel for efficient delivery and precisely controlled release of miRNAs into bone defect sites. The hydrogel is formed by polyethylene glycol (PEG), which is crosslinked by 'click' reaction. Cholesterol-modified miR-26a loading on the hydrogel is covalently patterned onto the fibers of hydrogel through a UV light-cleavable linker, which prevents undesired release of miRNA. This hydrogel could realize the controlled release of miRNA under light regulation both in vitro and in vivo , thus realize bone regeneration. [Display omitted] [ABSTRACT FROM AUTHOR]

Injectable hydrogels have been studied as drug delivery systems because of their minimal invasiveness and sustained drug release properties. Pluronic F127, consisting of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymers, exhibits thermo-responsive properties and hence is injectable due to its rapid sol-gel transition. Unmodified Pluronic F127-based hydrogels, however, have limited long-term stability and controllable release of drugs entrapped within them. In this study, host-guest interactions between adamantane-conjugated Pluronic F127 (F127-Ad) and polymerized β-cyclodextrin (CDP) were employed to develop a hydrogel-based protein delivery system. Single or multiple adamantane units were successfully introduced at the termini of Pluronic F127 with a 100% conversion yield, and the synthesized F127-Ad polymer produced a physically crosslinked micelle-packing structure when mixed with CDP. As the number of adamantanes at the terminal ends of Pluronic F127 increased, the critical gelation concentration of F127-Ad/CDP hydrogel decreased from 15 to 6% (w/v). The F127/CDP hydrogel was able to maintain its structure even with lower polymer content, and its injectability improved with a reduction of the hydrogel viscosity. The long-term stability of F127/CDP hydrogels was evaluated in vitro and in vivo , and it was demonstrated that the subcutaneously injected hydrogel did not disintegrate for up to 30 d. Throughout the drug release test using gelatin and insulin as model drugs, it was demonstrated that their release rates could be regulated via complexation between the protein drugs and the β-cyclodextrin molecules inside the hydrogel. In conclusion, the F127-Ad/CDP hydrogel is expected to be a versatile protein delivery system with controllable durability and drug release characteristics. Pluronic F127 is one of the widely studied polymeric materials for thermo-sensitive injectable hydrogels due to its high biocompatibility and rapid sol-gel transition. Since the Pluronic F127-based hydrogel has some limitations in its long-term stability and mechanical property, it is inevitable to modify its structure for the application to drug delivery. In this study, mono- or multi- adamantane-conjugated Pluronic F127s were synthesized and mixed with β-cyclodextrin polymers to form hydrogels with host-guest interaction-mediated micelle-packing structures. The host-guest interaction introduced into the hydrogel system endowed it a sustained protein drug release behavior as well as high durability in vitro and in vivo. By increasing the number of adamantane molecules at the end of the Pluronic F127, both the stability and injectability of the hydrogel could be also modulated. [Display omitted] [ABSTRACT FROM AUTHOR]

Decellularized extracellular matrix (dECM) derived from natural ECM is receiving considerable interest as a promising component of tissue adhesives because of its high biocompatibility and tissue regenerative ability. However, the availability of dECM as a tissue adhesive is limited because of the lack of a gelator that can crosslink low concentrations of dECM to form hydrogels. Here, we report dECM-based tissue adhesives using a genipin gelator. Based on the pH-dependent reactivity of genipin, genipin-terminated 4 arm-poly(ethylene glycol) (GeniPEG) was synthesized. dECM-based hydrogels were formed within a few seconds of mixing GeniPEG and dECM at an optimum pH through crosslinking of dECM and self-crosslinking between GeniPEG molecules. The hydrogels crosslinked with GeniPEG exhibited greater tissue adhesive strength to porcine-derived aorta tissue than those crosslinked with genipin. Moreover, GeniPEG can be applied to various dECMs, including those from the urinary bladder, heart, liver, pancreas, and small intestine. In vivo implantation experiments demonstrated biocompatibility and biodegradability of the dECM-GeniPEG hydrogels. Therefore, this dECM-based hydrogel may extend the possibility and availability of dECM as an organ-specific tissue adhesive and contribute to successful minimally invasive surgery. There is a strong need to develop highly functional tissue adhesives with high biocompatibility, tissue adhesive strength, and tissue regenerative ability. In this report, dECM-based tissue adhesives were reported using a pH-driven genipin-gelator. Focusing on the pH-dependent reactivity of genipin, genipin-based gelators were synthesized to form dECM-based hydrogels in response to pH changes. The crosslinking reaction proceeded within a few seconds to form hydrogels. The hydrogels obtained had greater tissue adhesion to aorta tissue than that of the free genipin crosslinker. This gelator can be applied to various types of dECMs. This dECM-based hydrogel had high biocompatibility and tissue adhesive properties and is useful for sealing wounds and preventing postoperative complications. [Display omitted] [ABSTRACT FROM AUTHOR]

It was demonstrated herein that the adhesive property of catechol-functionalized nanocomposite hydrogel can be enhanced by tuning the cohesive strength due to the secondary crosslinking between catechol and synthetic bioactive nanosilicate, viz. Laponite (LP). The nanocomposite hydrogel consists of the natural anionic poly(γ-glutamic acid) (γ-PGA), which was functionalized with catechol moiety, and incorporated with disk-structured LP. The dual-crosslinked hydrogel was fabricated by enzymatic chemical crosslinking of catechol in the presence of horseradish peroxidase (HRP) and H 2 O 2 , and physical crosslinking between γ-PGA-catechol conjugate and LP. The PGADA/LP nanocomposite hydrogels with catechol moieties showed strong adhesiveness to various tissue layers and demonstrated an excellent hemostatic properties. These PGADA/LP nanocomposite hydrogels are potentially applied for injectable tissue engineering hydrogels, tissue adhesives, and hemostatic materials. Recently, many attempts have been performed to manufacture high-performance tissue adhesives using synthetic and natural polymer-based materials. In order to apply in various biological substrates, commercially available tissue adhesives should have an improved adhesive property in wet conditions. Here, we designed a mussel-inspired dual crosslinked tissue adhesive that meets most of conditions as an ideal tissue adhesive. The designed tissue adhesive is composed of poly(γ-glutamic acid)-dopamine conjugate (PGADA)-gluing macromer, horseradish peroxidase (HRP)/hydrogen peroxide (H 2 O 2)-enzymatic crosslinker, and Laponite (LP)-additional physical crosslinking nanomaterial. The PGADA hydrogel has tunable physicochemical properties by controlling the LP concentration. Furthermore, this dual crosslinked hydrogel shows strong tissue adhesive property, regardless of the tissue types. Specially the PGADA hydrogel has tissue adhesive strength four times higher than commercial bioadhesive. This dual crosslinked PGADA hydrogel with improved tissue adhesion property is a promising biological tissue adhesive for various tissue type in surgical operation. Image, graphical abstract [ABSTRACT FROM AUTHOR]

Diabetic nephropathy (DN) is one of the most serious complications of diabetes mellitus. The combination of insulin (Ins) with liraglutide (Lir) has a greater potential for preventing DN than monotherapy. However, the renal protective effect of the combined Ins/Lir therapy is largely compromised due to their short half-lives after subcutaneous injection. Herein, a glucose-responsive hydrogel was designed in situ forming the dynamic boronic esters bonds between phenylboronic acid-grafted γ-Polyglutamic acid (PBA-PGA) and konjac glucomannan (KGM). It was hypothesized that the KGM/PBA-PGA hydrogel as the delivery vehicle of Ins/Lir would enhance the combinational effect of the latter on preventing the DN progress. Scan electronic microscopy and rheological studies showed that KGM/PBA-PGA hydrogel displayed good glucose-responsive property. Besides, the glucose-sensitive release profile of either Ins or Lir from KGM/PBA-PGA hydrogel was uniformly displayed at hyperglycemic level. Furthermore, the preventive efficacy of KGM/PBA-PGA hydrogel incorporating insulin and liraglutide (Ins/Lir-H) on DN progress was evaluated on streptozotocin-induced rats with diabetic mellitus (DM). At 6 weeks after subcutaneous injection of Ins/Lir-H, not only the morphology of kidneys was obviously recovered as shown by ultrasonography, but also the renal hemodynamics was significantly improved. Meanwhile, the 24-h urinary protein and albumin/creatinine ratio were well modulated. Inflammation and fibrosis were also largely inhibited. Besides, the glomerular NPHS-2 was obviously elevated after treatment with Ins/Lir-H. The therapeutic mechanism of Ins/Lir-H was highly associated with the alleviation of oxidative stress and activation of autophagy. Conclusively, the better preventive effect of the combined Ins/Lir via KGM/PBA-PGA hydrogel on DN progress was demonstrated as compared with their mixed solution, suggesting KGM/PBA-PGA hydrogel might be a potential vehicle of Ins/Lir to combat the progression of DN. Image, graphical abstract [ABSTRACT FROM AUTHOR]

Adipose tissue engineering represents a valuable alternative for reconstructive and cosmetic applications to restore soft tissue loss. Herein, for the development of a tissue-engineered adipose substitute, we designed an injectable thermoresponsive tissue adhesive hydrogel by grafting bioengineered mussel adhesive protein (MAP) with poly(N -isopropylacrylamide) (PNIPAM) and incorporating decellularized adipose tissue (DAT) powder as a biochemical cue. The body temperature-activated PNIPAM-grafted MAP (MAP-PNIPAM) hydrogel showed 3.2-times higher water retention ability, high porosity, and 8.4-times stronger tissue adhesive properties compared to the PNIPAM gel alone with pore collapse. Moreover, we found that the introduction of 5 wt% DAT powder had adipo-inductive and adipo-conductive effects, which might be due to the provision of biochemical substrates enriched in collagen and laminin for cell-cell and cell-matrix interactions. In vivo subcutaneous injection of the adipose-derived stem cell-laden DAT-incorporated MAP-PNIPAM hydrogel further demonstrated better volume maintenance, angiogenesis, and lipid accumulation than control injectable alginate gel or DAT powder only. Collectively, our injectable body temperature-activated tissue adhesive MAP-PNIPAM hydrogel system with a decellularized extracellular matrix source can be utilized as a promising alternative for tissue-specific regenerative stem cell therapy. For adipose tissue engineering, we designed an injectable body temperature-activated adhesive hydrogel by grafting bioengineered mussel adhesive protein (MAP) with poly(N-isopropylacrylamide) (PNIPAM) and incorporating adipose-derived stem cells (ASCs) and decellularized adipose tissue (DAT) powder as regenerative cell and ECM sources. PNIPAM has been widely used for cell sheet engineering, but not for cell carriers due to its dramatic thermal contractive properties. By conjugation with hydrophilic MAP, water retention ability and tissue adhesiveness of the scaffold increased by a factor of 3.2- and 8.4-fold, respectively, which are highly required for survival of the transplanted cells and interfacial integration with host tissues. In vivo performance demonstrated that ASCs/DAT powder-laden MAP-PNIPAM hydrogel achieved better volume maintenance, neovascularization, and adipogenesis than control injectable groups. Image, graphical abstract [ABSTRACT FROM AUTHOR]

Injectable hydrogels have attracted increasing attention because of convenient clinical operation, non-invasive surgical procedure and seamless filling of irregular defects. Here, injectable di-self-crosslinking HSMSSA hydrogel was formed via fast thiol/maleimide click chemistry reaction and thiol oxidation reaction as primary and secondary self-crosslinking network, respectively. Molecular weight and precursor concentration significantly affected physichemical properties and biological functions of hydrogels. Although single HSMSSA gel (0.1 M Da, 10 mg/mL) had moderate injectability, preferable mechanical properties and good proliferative ability of chondrocytes in vitro , and could greatly promote cartilaginous tissue formation in vivo , the lack of adhesion sites resulted in an untenable situation in maintaining effective connections among newborn cell clusters. However, the biomimetic injectable di-self-crosslinking blend hydrogel by combing injectable HSMSSA and bioactive Col I had improved resistance to degradation, chondrocytes adhesion and proliferation, especially for multiples ascending genes expression level associated with hyaline cartilage formation and polyproteoglycan secretion, which might be a potential clinical treatment strategy for constructing injectable cartilage repair filler by combining expanded autologous chondrocytes. An injectable di-self-crosslinking Hyaluronan–Based hydrogel was formed via fast thiol/maleimide click chemistry reaction and thiol oxidation reaction as primary/secondary self-crosslinking network, respectively. Molecular weight and precursor concentration significantly affected physichemical properties and biological functions of the hydrogels. Although this HSMSSA gel (0.1 M Da, 10 mg/mL) had moderate injectability, preferable mechanical properties, and good proliferative ability of chondrocytes in vitro , and could greatly promote cartilaginous tissue formation in vivo , the lack of adhesion sites resulted in ineffective connections among newborn cell clusters. The biomimetic injectable di-self-crosslinking blend hydrogel improved chondrocyte adhesion and proliferation by combined injectable HSMSSA and bioactive Col I, especially for multiple ascending gene expression levels associated with hyaline cartilage formation and polyproteoglycan secretion. Image, graphical abstract [ABSTRACT FROM AUTHOR]

Injury to the skin from severe burns can cause debilitating physical and psychosocial distress to the patients. Upon healing, deep dermal burns often result in devastating hypertrophic scar formation. For many decades, stem cell-based therapies have shown significant potential in improving wound healing. However, current cell delivery methods are often insufficient to maintain cell viability in a harmful burn wound environment to promote skin regeneration. In this study, we developed an enhanced approach to deliver adipose-derived stem cells (ASCs) for the treatment of burn wounds, using an in-situ-formed hydrogel system comprised of a hyperbranched poly(ethylene glycol) diacrylate (HB-PEGDA) polymer, a commercially available thiol-functionalized hyaluronic acid (HA-SH) and a short RGD peptide. Stable hydrogels with tunable swelling and mechanical properties form within five minutes under physiological conditions via the Michael-type addition reaction. Combining with RGD peptide, as a cell adhesion motif, significantly alters the cellular morphology, enhances cell proliferation, and increases the paracrine activity of angiogenesis and tissue remodeling growth factors and cytokines. Bioluminescence imaging of luciferase+ ASCs indicated that the hydrogel protected the implanted cells from the harmful wound environment in burns. Hydrogel-ASC treatment significantly enhanced neovascularization, accelerated wound closure and reduced the scar formation. Our findings suggest that PEG-HA-RGD-based hydrogel provides an effective niche capable of augmenting the regenerative potential of ASCs and promoting burn wound healing. Burn injury is one of the most devastating injures, and patients suffer from many complications and post-burn scar formation despite modern therapies. Here, we designed a conformable hydrogel-based stem cell delivery platform that allows rapid in-situ gelation upon contact with wounds. Adipose-derived stem cells were encapsulated into a PEG-HA-RGD hydrogels. Introducing of RGD motif significantly improved the cellular morphology, proliferation, and secretion of angiogenesis and remodeling cytokines. A deep second-degree burn murine model was utilized to evaluate in-vivo cell retention and therapeutic effect of the hydrogel-ASC-based therapy on burn wound healing. Our hydrogel remarkably improved ASCs viability in burn wounds and the hydrogel-ASC treatment enhanced the neovascularization, promoted wound closure, and reduced scar formation. Image, graphical abstract [ABSTRACT FROM AUTHOR]

The objective of this study is to design bioabsorbable injectable hydrogels based on the physico-chemical interaction between biocompatible polymers and ferric ions, and evaluate the survival, proliferation, and osteogenic differentiation of cells encapsulated in the hydrogels. The injectable hydrogels were prepared by simply mixing mixed alginate/gelatin solution at various ratios and FeCl 3 solution. The hydrogels prepared disappeared within a few days in the phosphate buffered-saline solution (PBS) with containing collagenase although the disappearance rate increased with an increase of the gelatin ratio in the hydrogel. For the hydrogel of alginate/gelatin low ratio, the survival and proliferation of cells in the hydrogel-encapsulated condition were significantly high compared with those of hydrogel at the higher ratios. The cells collected 3 days after cultured in the hydrogel also proliferated to a significantly higher extent than those collected from other hydrogels. The proliferation ability of cells was similar that of cells cultured on the standard tissue culture polystyrene (TCPS) dish. When evaluated to compare with cells cultured on the TCPS dish, the expression of runt-related transcription factor-2 (RUNX2) gene, the alkaline phosphatase (ALP) activity, and the calcium precipitation were significantly high. The cells were encapsulated by the mixed alginate/gelatin and FeCl 3 hydrogel and injected in the back subcutis of mice, the percentage of cells retained in the injected site was higher than that of cells injected in the PBS suspension. It is concluded that the injectable hydrogel prepared by simple mixing mixed alginate/gelatin solution and FeCl 3 solution is a promising material for the cell transplantation. Injectable hydrogels prepared by simple mixing mixed alginate/gelatin solution at various ratios and FeCl 3 solution. For the hydrogel of alginate/gelatin low ratio, the survival, the proliferation, and the differentiate properties of cells in the hydrogel-encapsulated condition were similar those of cells cultured on the TCPS dish. When the cells encapsulated hydrogels were injected in the back subcutis of mice, the percentage of cells retained in the injected site was higher than that of cells injected in the PBS suspension. It is concluded that the present injectable hydrogel is a promising material for the cell transplantation. Image, graphical abstract [ABSTRACT FROM AUTHOR]

Locoregional chemotherapy, especially using implantable hydrogel depots to sustainably deliver chemotherapeutics at tumor site, has shown great potential for improving antitumor efficacy and reducing systemic toxicity. However, the hydrogel applications are limited by some intrinsic constraints, especially the contradiction between increasing drug penetration and accumulation in tumor and decreasing random drug diffusion into surrounding normal tissues. Herein, we report a unique "Jekyll and Hyde" nanoparticle-hydrogel (NP-gel) hybrid platform, which can keep dormant in adjacent normal tissues but be activated by mildly acidic and hyaluronidase-rich microenvironment in malignant tumor tissues to unidirectionally release tumor-targeting and penetrative doxorubicin (DOX)-loaded NPs. Apart from tumor-specific recognition, penetration, internalization and release, NP-gel features: shear-thinning behavior for injection, tissue-adhesiveness for continuous on-site activation, and full biodegradability for safe use. Precise delivery was clearly demonstrated in both tumor-grafted and tumor-resected mice. A single peritumoral injection of DOX-loaded NP-gel exhibited a significantly higher drug accumulation in tumor for 3 weeks than in nontarget organs and thus long-term tumor remission. More importantly, significant inhibition in tumor recurrence without detectable toxicity to healthy organs was demonstrated when applied after tumor resection. The designed system displayed long-acting and precise anticancer efficacy, paving the way toward effective tumor locoregional treatment. Injectable hydrogels, allowing sustained drug delivery directly at tumor site, has shown great potential for locoregional chemotherapy. However, how to achieve tumor-specific drug accumulation but meanwhile impede the random drug diffusion into surrounding normal tissues remains an insurmountable challenge, especially considering high drug concentration gradient, higher interstitial fluid pressure and denser extracellular matrix in tumor than adjacent normal tissue. Herein, a 'Jekyll and Hyde' nanoparticle-hydrogel hybrid formulation was designed to keep dormant in adjacent normal tissues but be activated by mildly acidic and hyaluronidase-rich microenvironment in malignant tumor tissues to unidirectionally release tumor-targeting and penetrative DOX-loaded nanoparticles, leading to a significant tumor inhibition and antirecurrence efficiency without detectable toxicity to healthy organs, thus presenting great potential for precise locoregional chemotherapy. [ABSTRACT FROM AUTHOR]

Bioengineered soft tissues on any meaningful scale or complexity must incorporate aspects of the functional tissue, namely a vasculature, providing cells oxygen and nutrients critical for their survival. However, the ability of tissue engineering strategies to promote a fast revascularization is critically limited. Particularly in endodontic regenerative therapies, the complicated anatomy of the root canal system, and the narrow apical access limit the supply of new blood vessels and pulp tissue ingrowth. Here we characterize the viscoelastic and microstructural properties of a class of injectable hyaluronic acid (HA) hydrogels formed in situ , reinforced with cellulose nanocrystals (CNCs) and enriched with platelet lysate (PL), and test its ability to promote cells recruitment and proangiogenic activity in vitro . The incorporation of CNCs enhanced the stability of the materials against hydrolytic and enzymatic degradation. Moreover, the release of the chemotactic and pro-angiogenic growth factors (GFs) (PDGF and VEGF) from the PL-laden hydrogels showed an improved sustained profile proportional to the amount of incorporated CNCs. The PL-laden hydrogels exhibited preferential supportive properties of encapsulated human dental pulp cells (hDPCs) in in vitro culture conditions. Finally, PL-laden hydrogels stimulated chemotactic and pro-angiogenic activity by promoting hDPCs recruitment and cell sprouting in hDPCs/human umbilical vein endothelial cell co-cultures in vitro , and in an ex vivo model. These results support the use of the combined system as a scaffold for GFs delivery and cells recruitment, thereby exhibiting great clinical potential in treating injuries in vascularized tissues. Statement of Significance Innovative strategies for improved chemotactic and pro-angiogenic features of TE constructs are needed. In this study, we developed an injectable HA/CNC/PL hydrogel with improved structural and biologic properties, that not only provide a sustained release of chemotactic and proangiogenic GFs from PL but also enhance the cells’ viability and angiogenic activity. As a result of their unique traits, the developed hydrogels are ideally suited to simultaneously act as a GFs controlled delivery system and as a supportive matrix for cell culture, recruitment, and revascularization induction, holding great potential for the regeneration of vascularized soft tissues, such as the dentin-pulp complex. [ABSTRACT FROM AUTHOR]

The formation of adhesions during healing of an injured tendon remains a difficult problem in clinical practice. Local anti-inflammation gene delivery provides high local gene concentration, reduces the inflammatory response of the injured tendon microenvironment, and decreases systemic side effects to enhance in vivo efficacy. In this study, we designed a novel local sustained gene delivery system by using cyclooxygenase (COX-1 and COX-2)-engineered miRNA plasmid/nanoparticles embedded in hyaluronic acid (HA) hydrogel to reduce flexor tendon adhesions. The local sustained gene delivery system significantly downregulates COX-1 and COX-2 expression in the tendon tissue and the surrounding subcutaneous tissue. More importantly, this plasmid/nanoparticle hydrogel system significantly reduced tissue adhesion formation. This approach offers an effective therapeutic strategy to reduce tendon adhesions by directly targeting the down-regulation of COX-1 and COX-2 expression within the microenvironment of the injured tendon. Statement of Significance A local sustained gene delivery system was developed to regulate the expression of targeted genes in the specific time and location for tendon adhesion treatment. The engineered miRNA plasmid/nanoparticles embedded in hyaluronic acid hydrogel were synthesized to downregulate the expression of cyclooxygenases in the tendon tissue during the early stage of tendon healing with inflammatory response. This plasmid/nanoparticle hydrogel system offers an effective therapeutic strategy to attenuate the formation of tendon adhesion through direct downregulation of COX-1 and COX-2 expression within the microenvironment of the injured tendon. [ABSTRACT FROM AUTHOR]

Sustained, localized protein delivery can enhance the safety and activity of protein drugs in diverse disease settings. While hydrogel systems are widely studied as vehicles for protein delivery, they often suffer from rapid release of encapsulated cargo, leading to a narrow duration of therapy, and protein cargo can be denatured by incompatibility with the hydrogel crosslinking chemistry. In this work, we describe injectable nanocomposite hydrogels that are capable of sustained, bioactive, release of a variety of encapsulated proteins. Injectable and porous cryogels were formed by bio-orthogonal crosslinking of alginate using tetrazine-norbornene coupling. To provide sustained release from these hydrogels, protein cargo was pre-adsorbed to charged Laponite nanoparticles that were incorporated within the walls of the cryogels. The presence of Laponite particles substantially hindered the release of a number of proteins that otherwise showed burst release from these hydrogels. By modifying the Laponite content within the hydrogels, the kinetics of protein release could be precisely tuned. This versatile strategy to control protein release simplifies the design of hydrogel drug delivery systems. Statement of Significance Here we present an injectable nanocomposite hydrogel for simple and versatile controlled release of therapeutic proteins. Protein release from hydrogels often requires first entrapping the protein in particles and embedding these particles within the hydrogel to allow controlled protein release. This pre-encapsulation process can be cumbersome, can damage the protein’s activity, and must be optimized for each protein of interest. The strategy presented in this work simply premixes the protein with charged nanoparticles that bind strongly with the protein. These protein-laden particles are then placed within a hydrogel and slowly release the protein into the surrounding environment. Using this method, tunable release from an injectable hydrogel can be achieved for a variety of proteins. This strategy greatly simplifies the design of hydrogel systems for therapeutic protein release applications. [ABSTRACT FROM AUTHOR]

Long-term and daily subcutaneous injections of insulin for the treatment of insulin-dependent diabetic patients often lead to poor patient compliance and undesired complications. Phenylboronic acid (PBA)-based polymeric hydrogels have been widely considered as one of the most promising insulin delivery system to replace the frequent insulin injections. However, their applications are limited by clinically irrelevant glucose-responsive range, slow response rate, low tissue-adhesiveness and poor biodegradability, undesirable leakage at normoglycemic state. Herein, we report a novel implantable insulin hydrogel for glucose-regulated delivery of insulin based on a unique particle-hydrogel hybrid platform featuring fast glucose responsiveness at physiological pH, shear-thinning behavior for injection, tissue-adhesive function for long-lasting adherence, and full biodegradability for safe use. The system was thoroughly characterized both in vitro and in vivo and was demonstrated to hold these unique functions. Using streptozotocin-induced diabetic mice as a model, it was shown that a single subcutaneous injection of the insulin-loaded particle-hydrogel formulation led to quasi-steady-state blood glucose levels within the normal range for about two weeks. In addition, the preparation of the formulation only involved simple mixing and self-assembling processes, and thus it had great scalability and reproducibility for practical use. The highly feasible preparation, excellent performance, inherent biocompatibility and biodegradability make this novel composite hydrogel promising platform for diabetes therapy. Statement of Significance Phenylboronic acid (PBA)-based polymeric hydrogels have been widely considered as one of the most promising insulin delivery system to replace the frequent insulin injections. However, these hydrogels, mostly based on a variety of PBA-containing acrylamide monomers, are still far from clinical reality. Building upon a unique particle-hydrogel hybrid platform, herein we report a novel implantable insulin storage and delivery system with multifunctionalities including fast glucose-sensitiveness at physiological pH, shear-thinning behavior for injection, tissue-adhesive function for long-lasting adherence, biodegradable materials for safe use and well-controlled insulin release. These unique functions were demonstrated through research both in vitro and in vivo . In addition, the preparation of the formulation was simple, and thus it had great scalability and reproducibility for practical use. [ABSTRACT FROM AUTHOR]

Nanodiamonds (NDs) represent an emerging class of carbon nanomaterials that possess favorable physical and chemical properties to be used as multifunctional carriers for a variety of bioactive molecules. Here we report the synthesis and characterization of a new injectable ND-based nanocomposite hydrogel which facilitates a controlled release of therapeutic molecules for regenerative applications. In particular, we have formulated a thermosensitive hydrogel using gelatin, chitosan and NDs that provides a sustained release of exogenous human vascular endothelial growth factor (VEGF) for wound healing applications. Addition of NDs improved the mechanical properties of the injectable hydrogels without affecting its thermosensitive gelation properties. Biocompatibility of the generated hydrogel was verified by in vitro assessment of apoptotic gene expressions and anti-inflammatory interleukin productions. NDs were complexed with VEGF and the inclusion of this complex in the hydrogel network enabled the sustained release of the angiogenic growth factor. These results suggest for the first time that NDs can be used to formulate a biocompatible, thermosensitive and multifunctional hydrogel platform that can function both as a filling agent to modulate hydrogel properties, as well as a delivery platform for the controlled release of bioactive molecules and growth factors. Statement of Significance One of the major drawbacks associated with the use of conventional hydrogels as carriers of growth factors is their inability to control the release kinetics of the loaded molecules. In fact, in most cases, a burst release is inevitable leading to diminished therapeutic effects and unsuccessful therapies. As a potential solution to this issue, we hereby propose a strategy of incorporating ND complexes within an injectable hydrogel matrix. The functional groups on the surface of the NDs can establish interactions with the model growth factor VEGF and promote a prolonged release from the polymer network, therefore, providing a longer therapeutic effect. Our strategy demonstrates the efficacy of using NDs as an essential component for the design of a novel injectable nanocomposite system with improved release capabilities. [ABSTRACT FROM AUTHOR]

Hydrogels derived from adipose tissue extracellular matrix (AdECM) have shown potential in the ability to generate new adipose tissue in vivo . To further enhance adipogenesis, a composite adipose derived delivery system (CADDS) containing single- and double-walled dexamethasone encapsulated microspheres (SW and DW Dex MS) has been developed. Previously, our laboratory has published the use of Dex MS as an additive to enhance adipogenesis and angiogenesis in adipose tissue grafts. In the current work, AdECM and CADDS are extensively characterized, in addition to conducting in vitro cell culture analysis. Study results indicate the AdECM used for the CADDS has minimal cellular and lipid content allowing for gelation of its collagen structure under physiological conditions. Adipose-derived stem cell (ASC) culture studies confirmed biocompatibility with the CADDS, and adipogenesis was increased in experimental groups containing the hydrogel scaffold. In vitro studies of AdECM hydrogel containing microspheres demonstrated a controlled release of dexamethasone from SW and DW formulations. The delivery of Dex MS via an injectable hydrogel scaffold combines two biologically responsive components to develop a minimally, invasive, off-the-shelf biomaterial for adipose tissue engineering. Statement of significance Scientists and doctors have yet to develop an off-the-shelf product for patients with soft tissue defects. Recently, the use of adipose derived extracellular matrix (adECM) to generate new adipose tissue in vivo has shown great promise but individually, adECM still has limitations in terms of volume and consistency. The current work introduces a novel composite off-the-shelf construct comprised of an adECM-based hydrogel and dexamethasone encapsulated microspheres (Dex MS). The hydrogel construct serves not only as an injectable protein-rich scaffold but also a delivery system for the Dex MS for non-invasive application to the defect site. The methods and results presented are a progressive step forward in the field of adipose tissue engineering. [ABSTRACT FROM AUTHOR]

We previously reported a synthetic Laponite® crosslinked pNIPAM-co-DMAc (L-pNIPAM-co-DMAc) hydrogel which promotes differentiation of mesenchymal stem cells (MSCs) to nucleus pulposus (NP) cells without additional growth factors. The clinical success of this hydrogel is dependent on: integration with surrounding tissue; the capacity to restore mechanical function; as well as supporting the viability and differentiation of delivered MSCs. Bovine NP tissue explants were injected with media (control), human MSCs (hMSCs) alone, acellular L-pNIPAM-co-DMAc hydrogel or hMSCs incorporated within the L-pNIPAM-co-DMAc hydrogel and maintained at 5% O 2 for 6 weeks. Viability of native NP cells and delivered MSCs was maintained. Furthermore hMSCs delivered via the L-pNIPAM-co-DMAc hydrogel differentiated and produced NP matrix components: aggrecan, collagen type II and chondroitin sulphate, with integration of the hydrogel with native NP tissue. In addition L-pNIPAM-co-DMAc hydrogel injected into collagenase digested bovine discs filled micro and macro fissures, were maintained within the disc during loading and restored IVD stiffness. The mechanical support of the L-pNIPAM-co-DMAc hydrogel, to restore disc height, could provide immediate symptomatic pain relief, whilst the delivery of MSCs over time regenerates the NP extracellular matrix; thus the L-pNIPAM-co-DMAc hydrogel could provide a combined cellular and mechanical repair approach. Statement of Significance Low back pain (LBP) is associated with degeneration of the intervertebral disc (IVD). We have previously described development of a jelly delivery system (hydrogel). This has the potential to deliver adult stem cells to the centre of the IVD, known as the nucleus pulposus (NP). Here, we have demonstrated that adult stem cells can be safely injected into the NP using small bore needles, reducing damage to the disc. Following injection the hydrogel integrates with surrounding NP tissue, promotes differentiation of stem cells towards disc cells and restores IVD mechanical function. The hydrogel could be used to restore mechanical function to the IVD and deliver cells to promote regeneration of the disc as a minimally invasive treatment for LBP. [ABSTRACT FROM AUTHOR]

Transcatheter arterial chemoembolization (TACE) is the most common palliative therapy for unresectable hepatocellular carcinoma (HCC). The conventional TACE technique, which employs the Lipiodol® emulsion, has been widely used for human cancer treatments. However, this delivery system seems to be inconsistent and unstable in maintaining a high concentration of drugs at tumor sites. An alternative approach for TACE is loading drugs into a liquid embolic solution that exists as an injectable solution and can exhibit a sol-to-gel phase transition to form a solidified state once delivered to the tumor site. Here, we develop a novel sulfamethazine-based anionic pH-sensitive block copolymer with potential application as a radiopaque embolic material. The copolymer, named PCL-PEG-SM, and comprised of poly(ε-caprolactone), sulfamethazine, and poly(ethylene glycol), was fabricated by free radical polymerization. An aqueous solution of the developed copolymer underwent a sol-to-gel phase transition upon lowering the environmental pH to create a gel region that covered the physiological condition (pH 7.4, 37 °C) and the low pH conditions at tumor sites (pH 6.5–7.0, 37 °C). The release of doxorubicin (DOX) from DOX-loaded copolymer hydrogels could be sustained for more than 4 weeks in vitro , and the released DOX retained its fully bioactivity via inhibition the proliferation of hepatic cancer cells. The radiopaque embolic formulations that were prepared by mixing copolymer solutions at pH 8.0 with Lipiodol®, a long-lasting X-ray contrast agent, could exhibit the gelation inside the tumor after intratumoral injection or intraarterial administration using a VX2 carcinoma hepatic tumor rabbit model. These results suggest that a novel anionic pH-sensitive copolymer has been developed with a potential application as a liquid radiopaque embolic solution for TACE of HCC. State of Significance Transcatheter arterial chemoembolization (TACE) has been widely used as a palliative treatment therapy for unresectable hepatocellular carcinoma (HCC). Conventional TACE technique, which usually employs emulsion of DOX-in-Lipiodol®, followed by an embolic agent, has significant limitation of inconsistency and lack of controlled release ability. To address these limitations of conventional TACE material system, we introduced a novel liquid radiopaque embolic material from our pH-sensitive hydrogel. The material has low viscosity that can be injected via a microcatheter, rather biocompatibility, and drug controlled release ability. Importantly, it can form gel in the tumor as well as tumoral vasculature in response to the lowered pH at the tumor site, which proved the potential for the use to treat HCC by TACE therapy. [ABSTRACT FROM AUTHOR]

There is an urgent need for new therapeutic options for low back pain, which target degeneration of the intervertebral disc (IVD). Here, we investigated a pNIPAM hydrogel system, which is liquid at 39 °C ex vivo , where following injection into the IVD, body temperature triggers gelation. The combined effects of hypoxia (5% O 2 ) and the structural environment of the hydrogel delivery system on the differentiation of human mesenchymal stem cells (hMSCs), towards an NP cell phenotype was investigated. hMSCs were incorporated into the liquid hydrogel, the mixture solidified and cultured for up to 6 weeks under 21% O 2 or 5% O 2 where viability was maintained. Immunohistochemistry revealed significant increases in NP matrix components: aggrecan; collagen type II and chondroitin sulphate after culture for 1 week in 5% O 2 , accompanied by increased matrix staining for proteoglycans and collagen, observed histologically. NP markers HIF1α, PAX1 and FOXF1 were also significantly increased where hMSC were incorporated into hydrogels with accelerated expression observed when cultured in 5% O 2 . hMSCs cultured under hypoxic conditions, which mimic the native disc microenvironment, accelerate differentiation of hMSCs within the hydrogel system, towards the NP phenotype without the need for chondrogenic inducing medium or additional growth factors, thus simplifying the treatment strategy for the repair of IVD degeneration. [ABSTRACT FROM AUTHOR]

Injectable hydrogels have gained great attentions for cell therapy and tissue regeneration as a result of the applications in minimally invasive surgical procedures with the ease of handling and complete filling of the defect area. Here, a novel biodegradable, thermosensitive and injectable carboxymethyl chitin (CMCH) hydrogel was developed for three-dimensional (3D) cell culture. The obtained CMCH solution remained transparent liquid flowing easily at low temperatures and gelled rapidly at 37 °C. The gelation time of CMCH hydrogels could be easily tuned by varying temperature and the degree of carboxymethylation, which facilitates the cell encapsulation process at room temperature and in-situ forming hydrogel at body temperature. Moreover, the CMCH-14 hydrogels in PBS buffer remained stable and continuous porous structure and could be degraded in the presence of lysozyme or hyaluronidase. HeLa cells proliferated sustainably and self-assembled to form 3D multicellular spheroids with high cell activity on the surface of CMCH-14 hydrogel. Encapsulation of COS-7 cells within the in-situ forming CMCH hydrogel demonstrated that CMCH hydrogels promoted cell survival and proliferation. In vivo mouse study of the CMCH hydrogels showed good in-situ gel formation and tissue biocompatibility. Thus, the biodegradable thermosensitive injectable CMCH hydrogels hold potential for 3D cell culture and biomedical applications. Statement of Significance Biodegradable hydrogels have been widely studied for cell therapy and tissue regeneration. Herein, we report a novel thermosensitive injectable carboxymethyl chitin (CMCH) hydrogel for 3D cell culture, which was synthesized homogeneously from the bioactive natural chitin through the “green” process avoiding using organic solvent. The CMCH solutions exhibited rapid thermoresponsive sol-to-gel phase transition behavior at 37 °C with controllable gelation times, which facilitates the cell encapsulation process at room temperature and in-situ forming hydrogel at body temperature. Importantly, in vitro 3D cell culture and in vivo mouse study of the CMCH hydrogel showed promotion of cell survival and proliferation, good in-situ gel formation and biocompatibility. We believe that such thermosensitive injectable CMCH hydrogels would be very useful for biomedical applications, such as tumor model for cancer research, post-operative adhesion prevention, the regeneration of cartilage and central nervous system and so on. [ABSTRACT FROM AUTHOR]

Hybrid hydrogels composed of poly( N -isopropylacrylamide) (pNIPAAM) and layered double hydroxides (LDHs) are presented in this study as novel injectable and thermoresponsive materials for siRNA delivery, which could specifically target several negative regulators of tissue homeostasis in cartilaginous tissues. Effectiveness of siRNA transfection using pNIPAAM formulated with either MgAl–LDH or MgFe–LDH platelets was investigated using osteoarthritic chondrocytes. Glyceraldehyde-3-phosphate dehydrogenase (GAPDH) was used as an endogenous model gene to evaluate the extent of silencing. No significant adverse effects of pNIPAAM/LDH hydrogels on cell viability were noticed. Cellular uptake of fluorescently labeled siRNA was greatly enhanced (>75%) in pNIPAAM/LDH hydrogel constructs compared to alginate, hyaluronan and fibrin gels, and was absent in pNIPAAM hydrogel without LDH platelets. When using siRNA against GAPDH, 82–98% reduction of gene expression was found in both types of pNIPAAM/LDH hydrogel constructs after 6 days of culturing. In the pNIPAAM/MgAl–LDH hybrid hydrogel, 80–95% of GAPDH enzyme activity was reduced in parallel with gene. Our findings show that the combination of a cytocompatible hydrogel and therapeutic RNA oligonucleotides is feasible. Thus it might hold promise in treating degeneration of cartilaginous tissues by providing supporting scaffolds for cells and interference with locally produced degenerative factors. [ABSTRACT FROM AUTHOR]

Tissue-derived extracellular matrix (ECM) biomaterials to regenerate the meniscus have gained increasing attention in treating meniscus injuries and diseases, particularly for aged persons and athletes. However, ECM scaffold has poor cell infiltration and can only be implanted using surgical procedures. To overcome these limitations, we developed an injectable ECM hydrogel material from porcine meniscus via modified decellularization and enzymatic digestion. This meniscus-derived ECM hydrogel exhibited a fibrous morphology with tunable compression and initial modulus. It had a good injectability evidenced by syringe injection into mouse subcutaneous tissue. The hydrogel showed good cellular compatibility by promoting the growth of both bovine chondrocytes and mouse 3T3 fibroblasts encapsulated in the hydrogel for 2 weeks. It also promoted cell infiltration as shown in both in vitro cell culture and in vivo mouse subcutaneous implantation. The in vivo study revealed that the ECM hydrogel possessed good tissue compatibility after 7 days of implantation. The results support the great potential of the newly produced injectable meniscus-derived ECM hydrogel specifically for meniscus repair and regeneration. [ABSTRACT FROM AUTHOR]

Injectable biomaterials are attractive for soft tissue regeneration because they are handled in a minimally invasive manner and can easily adapt to complex defects. However, inadequate vascularization of the injectable constructs has long been a barrier, leading to necrosis or volume reduction after implantation. In this work, we developed a three-step process to synthesize injectable gelatin-derived hydrogels that are capable of controlling growth factor delivery to induce angiogenesis. In our approach, tyramine was first introduced into gelatin chains to provide enzymatic crosslinking points for gel formation after injection. Next, heparin, a polysaccharide with binding domains to many growth factors, was covalently linked to the tyramine-modified gelatin. Finally, vascular endothelial growth factor (VEGF) was incorporated into the gelatin derivative by binding with the heparin in the gelatin derivative, and an injectable gel with controlled VEGF release was formed by an enzymatic catalytic reaction with hydrogen peroxide (H 2 O 2 ) and horseradish peroxidase (HRP). The gelation time, mechanical properties and degradation of the gel was readily tailored by the gelatin concentration and the ratio of H 2 O 2 /HRP. Binding VEGF to heparin stabilizes this growth factor, protects it from denaturation and proteolytic degradation and subsequently prolongs the sustained release. An in vitro release study and bioactivity assay indicated that the VEGF was released in a sustained manner with high bioactivity for over 3 weeks. Furthermore, a chicken chorioallantoic membrane (CAM) assay and animal experiments were performed to evaluate in vivo bioactivity of the VEGF released from the hydrogels. After 5 days of incubation on CAM, the number of blood vessels surrounding the heparin-modified hydrogels was increased by 2.4-fold compared with that of the control group. Deeper and denser cell infiltration and angiogenesis in the heparin-modified gelatin/VEGF gels were observed compared to the controls after being subcutaneously injected in the dorsal side of the mice for 2 weeks. Interestingly, even without the incorporation of VEGF, the heparin-modified gelatin derivative still had the capability to induce angiogenesis to a certain degree. Our results suggest that the gelatin derivative/VEGF is an excellent injectable delivery system for induced angiogenesis of soft tissue regeneration. [ABSTRACT FROM AUTHOR]

In the pursuit of new strategies for the design and synthesis of high performance, physically associated hydrogels, dynamic materials formed through electrostatic interactions can serve as a powerful model. Here, we introduce a convenient strategy to obtain biodegradable hydrogels from ABA triblock ionic polypeptides formed by mixing poly( l -glutamic acid)–block-poly(ethylene glycol)–block-poly( l -glutamic acid) (PGA–PEG–PGA) with poly( l -lysine)–block-poly(ethylene glycol)–block-poly( l -lysine) (PLL–PEG–PLL). The hydrogels showed tunable physical properties, high strength and reversible response. The reactive function groups in the ionic blocks can conjugate with oppositely charged drugs or proteins and allow for further modification. These ionic ABA triblock polyelectrolytes can also encapsulate intact cells without significantly compromising cell viability, suggesting that the hydrogels have excellent cytocompatibility. In vivo evaluation performed in rats with subcutaneous injection indicated that the gels were formed and degraded, and hematoxylin and eosin staining suggested good biocompatibility in vivo. In addition, these advantages, combined with the synthetic accessibility of the copolymer, make this cross-linking system a flexible and powerful new tool for the development of injectable hydrogels for biomedical applications. [ABSTRACT FROM AUTHOR]

Abstract: A new class of injectable and erodible hydrogels exhibiting highly robust gel strength at body temperature was fabricated by enzyme-mediated cross-linking between Pluronic copolymer micelles. Tyramine-conjugated Pluronic F-127 tri-block copolymers at two terminal ends of polyethylene oxide (PEO) side chains were synthesized and utilized to form self-assembled micelles in aqueous solution. Tyrosinase was employed to convert tyramine-conjugated micelles to highly reactive catechol conjugated micelles that could further cross-link individual Pluronic copolymer micelles to form a highly stable gel structure. The enzyme cross-linked Pluronic hydrogels showed far lower critical gelation concentration, concomitantly showing enhanced gel strength compared to unmodified Pluronic copolymer hydrogels, suitable for sustained delivery of bioactive agents. Rheological studies demonstrated that the enzyme cross-linked hydrogels exhibited a fast and reversible sol–gel transition in response to temperature while maintaining sufficient mechanical strength at the gel state. In situ formed hydrogels were eroded gradually, releasing FITC-labeled dextran in an erosion-controlled manner. Moreover, they showed tissue-adhesive properties due to the presence of unreacted catechol groups in the gel structure. Enzyme cross-linked Pluronic hydrogels could be potentially used for delivery applications of drugs and cells. [Copyright &y& Elsevier]

Abstract: Injectable hydrogel allows irregular surgical defects to be completely filled, lessens the risk of implant migration, and minimizes surgical defects due to the solution–gel state transformation. Here, we first propose a method for preparing oxidized hyaluronic acid/adipic acid dihydrazide (oxi-HA/ADH) injectable hydrogel by chemical cross-linking under physiological conditions. Fourier transform infrared spectrometry and trinitrobenzene sulfonate assay were used to confirm the oxidation of hyaluronic acid. Rheological properties were measured to evaluate the working ability of the hydrogel for further clinical application. The oxi-HA/ADH in situ forming hydrogel can transform from liquid form into a gel-like matrix within 3–8min, depending on the operational temperature. Furthermore, hydrogel degradation and cell assessment is also a concern for clinical application. Injectable oxi-HA/ADH8 hydrogel can maintain its gel-like state for at least 5weeks with a degradation percentage of 40%. Importantly, oxi-HA/ADH8 hydrogel can assist in nucleus pulposus cell synthesis of type II collagen and aggrecan mRNA gene expression according to the results of real-time PCR analysis, and shows good biocompatibility based on cell viability and cytotoxicity assays. Based on the results of the current study, oxi-HA/ADH hydrogel may possess several advantages for future application in nucleus pulposus regeneration. [Copyright &y& Elsevier]

Abstract: Injectable hydrogels based on hyaluronic acid (HA) and poly(ethylene glycol) (PEG) were designed as biodegradable matrices for cartilage tissue engineering. Solutions of HA conjugates containing thiol functional groups (HA-SH) and PEG vinylsulfone (PEG-VS) macromers were cross-linked via Michael addition to form a three-dimensional network under physiological conditions. Gelation times varied from 14min to less than 1min, depending on the molecular weights of HA-SH and PEG-VS, degree of substitution (DS) of HA-SH and total polymer concentration. When the polymer concentration was increased from 2% to 6% (w/v) in the presence of 100Uml−1 hyaluronidase the degradation time increased from 3 to 15days. Hydrogels with a homogeneous distribution of cells were obtained when chondrocytes were mixed with the precursor solutions. Culturing cell–hydrogel constructs prepared from HA185k-SH with a DS of 28 and cross-linked with PEG5k-4VS for 3weeks in vitro revealed that the cells were viable and that cell division took place. Gel–cell matrices degraded in approximately 3weeks, as shown by a significant decrease in dry gel mass. At day 21 glycosaminoglycans and collagen type II were found to have accumulated in hydrogels. These results indicate that these injectable hydrogels have a high potential for cartilage tissue engineering. [Copyright &y& Elsevier]

Abstract: Injectable hydrogels have been studied for potential applications for articular cartilage regeneration. In this study, a thermosensitive chitosan–Pluronic (CP) hydrogel was designed as an injectable cell delivery carrier for cartilage regeneration. The CP conjugate was synthesized by grafting Pluronic onto chitosan using EDC/NHS chemistry. The sol–gel phase transition and mechanical properties of the CP hydrogel were examined by rheological experiments. The CP solution underwent a sol–gel transition around 25°C at which the storage modulus (G′) approaches 104 Pa, highlighting the potential of this material as an injectable scaffold for cartilage regeneration. The CP hydrogel was formed rapidly by increasing the temperature. The morphology of the dried CP hydrogel was observed by scanning electron microscopy. In vitro cell culture was performed using bovine chondrocytes. The proliferation of bovine chondrocytes and the amount of synthesized glycosaminoglycan increased for 28 days. These results suggested that the CP hydrogel has potential as an injectable cell delivery carrier for cartilage regeneration and could serve as a new biomaterial for tissue engineering. [Copyright &y& Elsevier]

Abstract: Biocompatible polymer solutions that can crosslink in situ following injection to form stable hydrogels are of interest as depots for sustained delivery of therapeutic factors or cells, and as scaffolds for regenerative medicine. Here, injectable self-gelling alginate formulations obtained by mixing alginate microspheres (as calcium reservoirs) with soluble alginate solutions were characterized for potential use in immunotherapy. Rapid redistribution of calcium ions from microspheres into the surrounding alginate solution led to crosslinking and formation of stable hydrogels. The mechanical properties of the resulting gels correlated with the concentration of calcium-reservoir microspheres added to the solution. Soluble factors such as the cytokine interleukin-2 were readily incorporated into self-gelling alginate matrices by simply mixing them with the formulation prior to gelation. Using alginate microspheres as modular components, strategies for binding immunostimulatory CpG oligonucleotides onto the surface of microspheres were also demonstrated. When injected subcutaneously in the flanks of mice, self-gelling alginate formed soft macroporous gels supporting cellular infiltration and allowing ready access to microspheres carrying therapeutic factors embedded in the matrix. This in situ gelling formulation may thus be useful for stimulating immune cells at desired locales, such as solid tumors or infection sites, as well as for other soft tissue regeneration applications. [Copyright &y& Elsevier]