Search

In the current study, it was intended to prepare liquisolid tablets of pioglitazone HCl to improve the bioavailability and dissolution time of the drug, as it has low solubility in water. Mathematical formulas were adopted, and the quantities of the carrier (MCC), coating material (colloidal silicon dioxides), and nonvolatile liquid vehicle (Tween 80) were taken. Various ratios of the drug to liquid and carrier to coating had been used in the formulation of liquisolid compacts. The evaluation of the formulated liquisolid compacts was done by performing FTIR, DSC, XRD, and SEM studies. Postcompression parameters, dissolution, stability, and bioavailability were accessed for the optimized formulation. FTIR and DSC studies showed the compatibility of the drugs and excipients. XRD revealed the transition to the amorphous state. It was found that the properties of the newly manufactured liquisolid tablets were within the parameters of what is considered acceptable. The optimized formulation of LST10 showed 99.87 ± 0.19% ( p < 0.05) pioglitazone released within 60 min of dissolution. Dissolution data treatments ( Q 15 , IDR, RDR, %DE, MDT, f 1 , and f 2 ) resulted in better drug release than other drugs studied and marketed tablet formulations. The optimized formulation produced had been proven stable when it was subjected to accelerated stability testing. This suggested that the bioavailability of pioglitazone was enhanced, as indicated by the substantial increase in AUC 0- t (3.06-fold) and C max (4.18-fold). According to the findings, the selected combination and method significantly increased the dissolution time and bioavailability of pioglitazone. Moreover, this developed method can be used for other drugs with low water solubility., Competing Interests: The authors declare no competing financial interest., (© 2024 The Authors. Published by American Chemical Society.)

As synthetic and nonbiodegradable compounds are becoming a great challenge for the environment, developing polymer electrolytes using naturally occurring biodegradable polymers has drawn considerable research interest to replace traditional aqueous electrolytes and synthetic polymer-based polymer electrolytes. This study shows the development of a highly conducting ionic liquid (1-hexyl-3-methylimidazolium iodide)-doped corn starch-based polymer electrolyte. A simple solution cast method is used to prepare biopolymer-based polymer electrolytes and characterized using different electrical, structural, and photoelectrochemical studies. Prepared polymer electrolytes are optimized based on ionic conductivity, which shows an ionic conductivity as high as 1.90 × 10 -3 S/cm. Fourier transform infrared spectroscopy (FTIR) confirms the complexation and composite nature, while X-ray diffraction (XRD) and polarized optical microscopy (POM) affirm the reduction of crystallinity in biopolymer electrolytes after doping with ionic liquid (IL). Thermal and photoelectrochemical studies further affirm that synthesized material is well stable above 200 °C and shows a wide electrochemical window of 3.91 V. The ionic transference number measurement ( t ion ) confirms the predominance of ionic charge carriers in the present system. An electric double-layer capacitor (EDLC) and a dye-sensitized solar cell (DSSC) were fabricated by using the highest conducting corn starch polymer electrolyte. The fabricated EDLC and DSSC delivered an average specific capacitance of 130 F/g and an efficiency of 1.73% in one sun condition, respectively., Competing Interests: The authors declare no competing financial interest., (© 2024 The Authors. Published by American Chemical Society.)

This study addressed the limited antibacterial durability of textile materials, which has suppressed their applications in preventing infectious disease transmission. A class of highly durable antibacterial textiles was developed by incorporating protonated polyaniline (PANI) textile with poly(acrylic acid) (PAA) as the functional binder via cross-linking polymerization. The resulting PAA-PANI textile exhibits exceptional electrical conductivity, reaching 8.33 ± 0.04 × 10 -3 S/cm when cross-linked with 30% PAA. Remarkably, this textile maintains its electrical stability at 10 -3 S/cm even after 50 washing cycles, demonstrating unparalleled durability. Furthermore, the PANI-PAA textile showcases remarkable antibacterial efficacy, with 95.48% efficiency against Pseudomonas aeruginosa and 92.35% efficiency against Staphylococcus aureus bacteria, even after 50 washing cycles. Comparatively, the PAA-PANI textile outperforms its PANI counterpart by achieving an astounding 80% scavenging activity rate, whereas the latter only displayed a rate of 3.22%. This result suggests a solid integration of PAA-PANI into the textile, leading to sustainable antioxidant release. The successful cross-linking of PAA-PANI in textiles holds significant implications for various industries, offering a foundation for the development of wearable textiles with unprecedented antibacterial durability and electrical stability. This breakthrough opens new avenues for combating infectious diseases and enhancing the performance of wearable technologies., Competing Interests: The authors declare no competing financial interest., (© 2024 The Authors. Published by American Chemical Society.)

Herein, a nonenzymatic detection of paraoxon-ethyl was developed by modifying a glassy carbon electrode (GCE) with gold-silver core-shell (Au-Ag) nanoparticles combined with the composite of graphene with poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) (PEDOT:PSS). These core-shell nanoparticles (Au-Ag) were synthesized using a seed-growth method and characterized using UV-vis spectroscopy and high-resolution transmission electron microscopy (HR-TEM) techniques. Meanwhile, the structural properties, surface morphology and topography, and electrochemical characterization of the composite of Au-Ag core-shell/graphene/PEDOT:PSS were analyzed using infrared spectroscopy, field emission scanning electron microscopy (FE-SEM), atomic force microscopy (AFM), and electrochemical impedance spectroscopy (EIS) techniques. Moreover, the proposed sensor for paraoxon-ethyl detection based on Au-Ag core-shell/graphene/PEDOT:PSS modified GCE demonstrates good electrochemical and electroanalytical performance when investigated with cyclic voltammetry (CV), differential pulse voltammetry (DPV), and chronoamperometry techniques. It was found that the synergistic effect between Au-Ag core-shell nanoparticles and the composite of graphene/PEDOT:PSS provides a higher conductivity and enhanced electrocatalytic activity for paraoxon-ethyl detection at an optimum pH of 7. At pH 7, the proposed sensor for paraoxon-ethyl detection shows a linear range of concentrations from 0.2 to 100 μM with a limit of detection of 10 nM and high sensitivity of 3.24 μA μM -1 cm -2 . In addition, the proposed sensor for paraoxon-ethyl confirmed good reproducibility, with the possibility of being further developed as a disposable electrode. This sensor also displayed good selectivity in the presence of several interfering species such as diazinon, carbaryl, ascorbic acid, glucose, nitrite, sodium bicarbonate, and magnesium sulfate. For practical applications, this proposed sensor was employed for the determination of paraoxon-ethyl in real samples (fruits and vegetables) and showed no significant difference from the standard spectrophotometric technique. In conclusion, this proposed sensor might have a potential to be developed as a platform of electrochemical sensors for pesticide detection., Competing Interests: The authors declare no competing financial interest., (© 2024 The Authors. Published by American Chemical Society.)

The demand for wearable electronics has driven the development of conductive fabrics, particularly those incorporating polyaniline (PANI) that is known for its high electrical conductivity, flexibility, and ease of fabrication. However, the limited stability and durability of the conductive fabric, especially during washing, present significant challenges. The drawbacks can be traced by weak physical attachment between the fabric and the conductive coating, leading to a decrease in conductivity over time. These drawbacks significantly impact the fabric's functionality and performance, highlighting the need for effective solutions to enhance its stability and durability. This study focuses on addressing these challenges by employing a thermochemical treatment. A hydrophilic surface of the polyester fabric is obtained after the treatment (hydrolysis), followed by grafting of PANI on it. The adhesion between PANI and the polyester fabrics was found to be enhanced, as proved by contact angle analysis. Furthermore, the PANI-hydrolyzed fabrics (treated) demonstrated stable conductivity (∼10 -3 S cm -3 ) even after 10 washing cycles, showcasing their excellent durability. In comparison, the unhydrolyzed PANI fabric experienced a drop in conductivity by three orders of magnitude. X-ray photoelectron spectroscopy via N 1s core line spectra showed chemical shifts and quantified the level of doping through PANI's protonation level. We found that PANI-hydrolyzed fabrics preserved their dedoping level from 44.77 to 42.68%, indicating improved stability and extension of their electrical properties' lifetime after washing as compared to unhydrolyzed (untreated) fabrics, from 36.99 to 26.61%. This investigation demonstrates that the thermochemical approach can effectively enhance the durability of conductive PANI fabrics, enabling them to withstand the washing process while preserving their electrical endurance., Competing Interests: The authors declare no competing financial interest., (© 2023 The Authors. Published by American Chemical Society.)

Primary amoebic meningoencephalitis and granulomatous amoebic encephalitis are distressing infections of the central nervous system caused by brain-eating amoebae, namely, Naegleria fowleri and Acanthamoeba spp., respectively, and present mortality rates of over 90%. No single drug has been approved for use against these infections, and current therapy is met with an array of obstacles including high toxicity and limited specificity. Thus, the development of alternative effective chemotherapeutic agents for the management of infections due to brain-eating amoebae is a crucial requirement to avert future mortalities. In this paper, we synthesized a conducting polymer-based nanocomposite entailing polyaniline (PANI) and molybdenum disulfide (MoS 2 ) and explored its anti-trophozoite and anti-cyst potentials against Acanthamoeba castellanii and Naegleria fowleri . The intracellular generation of reactive oxygen species (ROS) and ultrastructural appearances of amoeba were also evaluated with treatment. Throughout, treatment with the 1:2 and 1:5 ratios of PANI/MoS 2 at 100 μg/mL demonstrated significant anti-amoebic effects toward A. castellanii as well as N. fowleri , appraised to be ROS mediated and effectuate physical alterations to amoeba morphology. Further, cytocompatibility toward human keratinocyte skin cells (HaCaT) and primary human corneal epithelial cells (pHCEC) was noted. For the first time, polymer-based nanocomposites such as PANI/MoS 2 are reported in this study as appealing options in the drug discovery for brain-eating amoebae infections., Competing Interests: The authors declare no competing financial interest., (© 2023 The Authors. Published by American Chemical Society.)

A Schiff base bearing two methyl substituents, namely, 6,6'-((1 E ,1' E )-((2,2-dimethylpropane-1,3-diyl) bis(azanylylidene)) bis(methanylylidene)) bis(2-methylphenol) [H 2 AD1Me] was synthesized and characterized through physicochemical and spectroscopic analyses. Then, the Schiff base was complexed with Pd(II) and Ni(II) to form [Pd(AD1Me)] and [Ni(AD1Me)], respectively. Both metal complexes were successfully obtained and characterized through several analyses, viz ., melting point, elemental analysis, molar conductivity, magnetic susceptibility, FTIR, 1 H NMR, UV-vis, and single crystal X-ray diffraction. A quantitative analysis of the intermolecular interactions in the crystal structures has been performed using Hirshfeld surface analysis. Both metal complexes were crystallized in a monoclinic crystal system with the space group of P 2 1 / c . Additionally, the deprotonated phenolic oxygen atom (O1/O2) and azomethine nitrogen atom (N1/N2) of the ligand chelate the Pd(II) and Ni(II) ions, forming a slightly distorted square-planar complex containing three six-membered rings encircling the metal core with dsp 2 hybridization. The shift of ν(C=N) to a higher frequency in FTIR by 26-28 cm -1 indicated that the complexation to Pd(II) and Ni(II) through the azomethine N was established. It was further supported through the shifting of the azomethine proton signal to higher or lower chemical shifts with Δδ = 0.43-1.15 ppm in 1 H NMR. In addition, the shifting of the n-π*(C=N) band in UV-vis spectra with Δλ = 24-40 nm indicated the involvement of azomethine nitrogen in the complexation. All the compounds showed no significant antibacterial activity against three bacterial strains, namely, Staphylococcus aureus subsp. aureus Rosenbach (ATCC 6538), Streptococcus mutans Clarke (ATCC 700,610), and Proteus vulgaris (ATCC 6380), as the percent growth inhibition calculated was less than 90%., Competing Interests: The authors declare no competing financial interest., (© 2022 The Authors. Published by American Chemical Society.)

Fouling formation in reactor vessels poses a serious threat to the safe operation of the industrial low-density polyethylene (LDPE) polymerization. Fouling also degrades the polymer quality and causes productivity loss to some extent. In this work, neural Wiener model predictive control (NWMPC) is introduced to address the fouling concern. In addition, a soft sensor model is used to activate the fouling-defouling (F-D) mechanism when the fouling surpasses the thickness limit to prevent vessel overheating. NWMPC is proven to be fast, stable, and robust under various control scenarios. The use of a soft sensor model in conjunction with NWMPC enables the online monitoring and controlling of the F-D processes. When comparison is made with a state space (SSMPC) utilizing only the linear block, NWMPC is found to be able to control the LDPE grade with quicker grade transition and lower resource consumption., Competing Interests: The authors declare no competing financial interest., (© 2022 The Authors. Published by American Chemical Society.)

A short, asymmetric synthesis of tetrahydro-2 H -furo[3,2- b ]pyrrole derivatives and (-)-Geissman-Waiss lactone starting from meso -cyclohexadiene epoxide is described. Pivotal transformations in the developed synthetic procedure include asymmetric epoxide ring opening to install the requisite 1 S ,5 S stereocenters and oxidative lactonization/lactamization sequences. This route provides a streamlined synthetic pathway toward necine alkaloids., Competing Interests: The authors declare no competing financial interest., (© 2021 The Authors. Published by American Chemical Society.)

This paper presents a scalable method of developing ultrasensitive electrochemical biosensors. This is achieved by maximizing sensor conductivity through graphene wrapping of carbonized electrospun nanofibers. The effectiveness of the graphene wrap was determined visually by scanning electron microscopy and chemically by Fourier transform infrared spectroscopy, Raman spectroscopy, and X-ray diffraction. The sensing performance of different electrode samples was electrochemically characterized using cyclic voltammetry and electrochemical impedance spectroscopy, with the graphene-wrapped carbonized nanofiber electrode showing significantly improved performance. The graphene-wrapped carbonized nanofibers exhibited a relative conductivity of ∼14 times and an electroactive surface area of ∼2 times greater compared to the bare screen-printed carbon electrode despite experiencing inhibitive effects from the carbon glue used to bind the samples to the electrode. The results indicate potential for a highly conductive, inert sensing platform., Competing Interests: The authors declare no competing financial interest., (© 2021 The Authors. Published by American Chemical Society.)

In this study, piperidinium-based ionic liquids (IL) containing trifluoromethanesulfonate, phenolate, and dicyanamide anions were synthesized. Using the ILs, extraction of naphthenic acid from highly acidic oil with a total acid number (TAN) of 1.44 was studied. Two agitation techniques have been implemented for the extraction process, which were mechanical stirring and ultrasonic-assisted irradiation. 1-Butyl-1-methylpiperidinium phenolate [BMPi][Phe] showed the best potential in extracting naphthenic acid from oil, with complete removal of naphthenic acid with IL-to-oil ratios of 0.010 and 0.0025 for the mechanical stirring method and the ultrasonic-assisted method, respectively. Ultrasonic-assisted extraction process shows very good potential in enhancing the extraction efficiency of naphthenic acid. Optimization and study on the effects of ultrasonic parameters, namely, IL-to-oil ratio, ultrasonic amplitude, and time, were studied through response surface methodology (RSM). Using [BMPi][Phe], the optimum conditions obtained are IL-to-oil ratio of 0.03, 53.91% of amplitude, and 4.29 min of extraction time. Under these optimum conditions, 100% removal of naphthenic acid was achieved., Competing Interests: The authors declare no competing financial interest., (© 2021 The Authors. Published by American Chemical Society.)

The surge of medical devices associated with nosocomial infection (NI) cases, especially by multidrug-resistant (MDR) bacterial strains, is one of the pressing issues of present health care systems. Metal oxide nanoparticles (MNPs) have become promising antibacterial agents against a wide range of bacterial strains. This work study is on the bactericidal capacity of heterogeneous TiO 2 /ZnO nanocomposites with different weight percentages and concentrations against common MDR and non-MDR bacterial strains. The profiles on disk diffusion, minimum inhibitory concentration, minimum bactericidal concentration, tolerance determination, time-kill, and biofilm inhibition assay were determined after 24 h of direct contact with the nanocomposite samples. Findings from this work revealed that the heterogeneous TiO 2 /ZnO nanocomposite with a 25T75Z weight ratio showed an optimal tolerance ratio against Gram-positive and -negative bacteria, indicating their bactericidal capacity. Further observation suggests that higher molar ratio of Zn 2+ may possibly involve generation of active ion species that enhance bactericidal effect against Gram-positive bacterial strains, especially for the MDR strains. Nano-based technology using MNPs may provide a promising solution for the prevention and control of NIs. Further work on biocompatibility and cytotoxicity profiles of this nanocomposite are needed., Competing Interests: The authors declare no competing financial interest., (Copyright © 2020 American Chemical Society.)

Several studies have shown that the mammalian target of rapamycin (mTOR) inhibitor; everolimus (EV) improves patient survival in several types of cancer. However, the meaningful efficacy of EV as a single agent for the treatment of colorectal cancer (CRC) has failed to be proven in multiple clinical trials. Combination therapy is one of the options that could increase the efficacy and decrease the toxicity of the anticancer therapy. This study revealed that the β-cyclodextrin (β-CD):FGF7 complex has the potential to improve the antiproliferative effect of EV by preventing FGF receptor activation and by enhancing EV cellular uptake and intracellular retention. Molecular docking techniques were used to investigate the possible interaction between EV, β-CD, and FGF7. Molecular docking insights revealed that β-CD and EV are capable to form a stable inclusion complex with FGF at the molecular level. The aqueous solubility of the inclusion complex was increased (3.1 ± 0.23 μM) when compared to the aqueous solubility of pure EV (1.7 ± 0.16 μM). In addition, the in vitro cytotoxic activity of a FGF7:β-CD:EV complex on Caco-2 cell line was investigated using real-time xCELLigence technology. The FGF7:β-CD:EV complex has induced apoptosis of Caco-2 cells and shown higher cytotoxic activity than the parent drug EV. With the multitargets effect of β-CD:FGF7 and EV, the antiproliferative effect of EV was remarkably improved as the IC 50 value of EV was reduced from 9.65 ± 1.42 to 1.87 ± 0.33 μM when compared to FGF7:β-CD:EV complex activity. In conclusion, the findings advance the understanding of the biological combinational effects of the β-CD:FGF7 complex and EV as an effective treatment to combat CRC., Competing Interests: The authors declare no competing financial interest.

Many studies have investigated natural convection heat transfer from the outside surface of horizontal and vertical cylinders in both constant heat flux and temperature conditions. However, there are poor studies in natural convection from inclined cylinders. In this study, free convection heat transfer was examined experimentally from the outside surface of a cylinder for glycerol and water at various heat fluxes. The tests were performed at 10 different inclination angles of the cylinder, namely, φ = 0°, 10°, 20°, 30°, 40°, 50°, 60°, 70°, 80°, and 90°, measured from the horizon. Our results indicated that the average Nusselt number reduces with the growth in the inclination of the cylinder to the horizon at the same heat flux, and the average Nusselt number enhanced with the growth in heat flux at the same angle. Also, the average Nusselt number of water is greater than that of glycerol. A new experimental model for predicting the average Nusselt number is suggested, which has a satisfactory accuracy for experimental data., Competing Interests: The authors declare no competing financial interest.