Search

Reservoir rock minerals and their surface charge development have been the subject of several studies with a consensus reached on their contribution to the control of reservoir rock surface interactions. However, the question of what factors control the surface charge of minerals and to what extent do these factors affect the surface charge remains unanswered. Also, with several factors identified in our earlier studies, the question of the order of effect on the mineral surface charge was unclear. To quantify the mineral surface charge, zeta potential measurements and Deryaguin-Landau-Verwey-Overbeek (DLVO) theories, as well as surface complexation models, are used. However, these methods can only predict a single mineral surface charge and cannot approximate the reservoir rock surface. This is because the reservoir rock is composed of many minerals in varying proportions. To address these drawbacks, for the first time, we present the implementation of machine learning models to predict reservoir minerals' surface charge. Four different models namely the Adaptive Boosting Regressor, Random Forest Regressor, Support Vector Regressor, and the Gradient Boosting tree were implemented for this purpose with all the model predictions over 95% accuracy. Also, feature ranking of the factors that control the mineral surface charge was carried out with the most dominant factors being the mineral type, salt type, and pH of the environment. Findings reveal an opportunity for accurate prediction of reservoir rock surface charge given the enormous amount of data available.

Asphaltene precipitation and deposition have been a formation damage problem for decades, with the most devastating effects being wettability alteration and permeability impairment. To this effect, a critical look into the laboratory studies and models developed to quantify/predict permeability and wettability alterations are reviewed, stating their assumptions and limitations. For wettability alterations, the mechanism is predominantly surface adsorption, which is controlled by the asphaltene contacting minerals as they control the surface chemistry, charge, and electrochemical interactions. The most promising wettability alteration evaluation techniques are nuclear magnetic resonance, ζ potential, and the use of high-resolution microscopy. The integration of such techniques, which is still missing, would reinforce the understanding of asphaltene interaction with rock minerals (especially clays), which holds the key to developing a strategy for modeling wettability alteration. With regard to permeability impairment, surface deposition, pore plugging, and fine migration have been identified as the dominant mechanisms with several models reporting the simultaneous existence of multiple mechanisms. Existing experimental findings showed that asphaltene deposition is non-uniform due to mineral distribution which further complicates the modeling process. It also remains a challenge to separate changes due to adsorption (wettability changes) from those due to pore size reduction (permeability impairment).

In this study, the simulation of a newly designed wind-sifter separator for dry beneficiation was deployed to upgrade -6.7 + 3.36, -3.36 + 1, and -1 mm coal. The wind-sifter principle is very effective for particle separation as it is based on the separation of lighter particles from heavier ones. First, the study entails computer simulations by utilizing the Lagrangian particle tracking method to observe the effectiveness of the wind sifting principle in separating particles based on their density in an air stream. From the three particle size fractions used, the simulation test results show that at a cut-point of 1.5 RD, yields of 29.1, 54.3, and 99.4% were attained at different optimum velocities for -6.7 + 3.36, -3.36 + 1, and -1 mm, respectively. The effect of operating parameters such as the mass flowrate and air velocity on yield, ash content, and calorific value were determined using the fabricated separator. A preliminary experimental study showed that the separator was effective in upgrading the feed coal with 30.28% ash content and 21 MJ/kg calorific value to clean coal with 18.94% ash content and 26.8 MJ/kg calorific value. A laboratory-scale wind-sifter separator was fabricated based on the results from the simulation test, which served as the first applied prototype in the field of dry coal beneficiation.

Reservoir rock wettability has been linked to the adsorption of crude fractions on the rock, with much attention often paid to the bulk mineralogy rather than contacting minerals. Crude oil is contacted by different minerals that contribute to rock wettability. The clay mineral effect on wettability alterations is examined using the mineral surface charge. Also, the pH change effect due to well operations was investigated. Clay mineral surface charge was examined using zeta potential computed from the particle electrophoretic mobility. Clay minerals considered in this study include kaolinite, montmorillonite, illite, and chlorite. Results reveal that the clay mineral charge development is controlled by adsorption of ionic species and double layer collapse. Also, clay mineral surface charge considered in this study shows that their surfaces become more conducive for the adsorption of hydrocarbon components due to the presence of salts. The salt effect is greater in the following order: NaHCO3 < Na2SO4 < NaCl < MgCl2 < CaCl2. Furthermore, different well operations induce pH environments that change the clay mineral surface charge. This change results in adsorption prone surfaces and with reservoir rock made up of different minerals, and the effect of contacting minerals is critical as shown in our findings. This is due to the contacting mineral control wettability rather than the bulk mineralogy.

Asphaltene adsorption and deposition onto rock surfaces are predominantly the cause of wettability and permeability alterations which result in well productivity losses. These alterations can be induced by rock-fluid interactions which are affected by well operations such as acidizing, stimulation, gas injections, and so forth. Iron minerals are found abundantly in sandstone reservoir formations and pose a problem by precipitation and adsorption of polar crude components. This is due to rock-fluid interactions, which are dependent on reservoir pH; thus, this research work studied the surface charge development of pyrite, magnetite, and hematite. To ascertain conditions that will result in iron mineral precipitation and adsorption of asphaltene on iron mineral surfaces, zeta potential measurement was carried out. This is to determine the charge and colloidal stability of the iron mineral samples across wide pH values. Experimental results show that the charge development of iron minerals is controlled by mineral dissolution, the formation of complexes, adsorption of ions on the mineral surface, and the collapse of the double layer. The findings provide insights into the implications of iron mineral contacting crude oil in reservoir formations and how they contribute to wettability alterations due to different well operations.

Scale formation and deposition in the subsurface and surface facilities have been recognized as a major cause of flow assurance issues in the oil and gas industry. Sulfate-based scales such as sulfates of calcium (anhydrite and gypsum) and barium (barite) are some of the commonly encountered scales during hydrocarbon production operations. Oilfield scales are a well-known flow assurance problem, which occurs mainly due to the mixing of incompatible brines. Researchers have largely focused on the rocks' petrophysical property modifications (permeability and porosity damage) caused by scale precipitation and deposition. Little or no attention has been paid to their influence on the surface charge and wettability of calcite minerals. Thus, this study investigates the effect of anhydrite and barite scales' presence on the calcite mineral surface charge and their propensity to alter the wetting state of calcite minerals. This was achieved vis-à-vis zeta-potential (ζ-potential) measurement. Furthermore, two modes of the scale control (slug and continuous injections) using ethylenediaminetetraacetic acid (EDTA) were examined to determine the optimal control strategy as well as the optimal inhibitor dosage. Results showed that the presence of anhydrite and barite scales in a calcite reservoir affects the colloidal stability of the system, thus posing a threat of precipitation, which would result in permeability and porosity damage. Also, the calcite mineral surface charge is affected by the presence of calcium and barium sulfate scales; however, the magnitude of change in the surface charge via ζ-potential measurement is insignificant to cause wettability alteration by the mineral scales. Slug and continuous injections of EDTA were implemented, with the optimal scale control strategy being the continuous injection of EDTA solutions. The optimal dosage of EDTA for anhydrite scale control is 5 and 1 wt % for the formation water and seawater environments, respectively. In the case of barite, in both environments, an EDTA dosage of 1 wt % suffices. Findings from this study not only further the understanding of the scale effects on calcite mineral systems but also provide critical insights into the potential of scale formation and their mechanisms of interactions for better injection planning and the development of a scale control strategy.

This article focuses on the flow assurance of waxy crude oil using an environmentally benign and cost-effective approach involving thermochemical reaction. The study incorporates experimental and simulation works to evaluate heat and pressure generation potentials and heat transfer efficiency of the thermochemical fluids. Experimental results reveal that at the concentration (1 M) of thermochemical fluid (TCF) ranging between 14 and 33% v/wt of the waxy oil, sufficient heat could be generated to raise the temperature of the oil significantly above the pour point (48 °C). In addition, from the bench-top treatment of a damaged tubing, it was observed that more than 95% of the deposited wax could be removed using the thermochemical solutions. Subsequently, a large-scale application of the technology in a long-distance flow assurance of waxy crude oil was confirmed through process simulation. Ultimately, the simulation results revealed the capacity of the method to improve the temperature and pressure profiles of the pipe flow system, and most significantly, to remove wax deposition up to 98%.

The new hybrid-type squaramide-fused amino alcohol containing both a Bronsted basic site and hydrogen-bonding sites in the molecule showed a high catalytic activity as an organocatalyst in the enantioselective domino Michael addition/cyclization reaction of oxoindolines with cyclic 1,3-diketones to afford the chiral spiro-conjugated oxindoles featuring 2-aminopyrans fusing with carbo-heterocyclic ring systems with excellent chemical yields (up to 98%) and enantioselectivities (up to 95% ee). The obtained chiral spiro-conjugated 2-aminopyrans bearing quaternary stereogenic carbon center could be used as synthetic precursors for several natural products that have a broad spectrum of fascinating biological activities.