Search

Spin-orbit torque (SOT) efficiency is one of the key issues of spintronics. However, enhancing the SOT efficiency is usually limited by the positive correlation between resistivity and the spin Hall ratio, where a high resistivity often accompanies a large spin Hall ratio. Here, we demonstrate that sub-nanometer β-W intercalation has a considerable impact on the SOT efficiency in α-W (6 nm)/Co (8 nm)/Pt (3 nm) samples. The damping-like SOT efficiency per unit current density, ξ

Implantable flexible mechanical sensors have exhibited great potential in health monitoring and disease diagnosis due to continuous and real-time monitoring capability. However, the wires and power supply required in current devices cause inconvenience and potential risks. Magnetic-based devices have demonstrated advantages in wireless and passive sensing, but the mismatched mechanical properties, poor biocompatibility, and insufficient sensitivity have limited their applications in biomechanical monitoring. Here, a wireless and passive flexible magnetic-based strain sensor based on a gelatin methacrylate/Fe

The rapid development of spintronics requires the devices to be flexible, to be used in wearable electronics, and controllable, to be used with magnetoelectric (ME) structures. However, the clamping effect inevitably leads to a decreased ME effect on the rigid substrate, and it remains challenging to directly prepare high-quality ferroelectric (FE) membranes on the widely used flexible substrate such as MICA or polyimide (PI). Here, periodic wrinkle-patterned flexible (Co/Pt)

The trend of mobile Internet requires portable and wearable devices as bio-device interfaces. Electric field control of magnetism is a promising approach to achieve compact, light-weight, and energy-efficient wearable devices. Within a flexible sandwich heterostructure, perpendicular magnetic anisotropy switching was achieved via low-voltage gating control of an ionic gel in mica/Ta/(Pt/Co) x/Pt/ionic gel/Pt, where (Pt/Co) x acted as a functional layer. By conducting in situ VSM, EPR, and MOKE measurements, a 1098 Oe magnetic anisotropy field change was determined at the bending state with tensile strain, corresponding to a magnetic anisotropy energy change of 3.16 × 105 J/m3 and a giant voltage tunability coefficient of 0.79 × 105 J/m3·V. The low voltage and strain dual control of magnetism on mica substrates enables tunable flexible spintronic devices with an increased degree of manipulation.

Traditional magnetostrictive/piezoelectric laminated composites rely on the two-dimensional interface that transfers stress/strain to achieve the large magnetoelectric (ME) coupling, nevertheless, they suffer from the theoretical limitation of the strain effect and of the substrate clamping effect in real ME applications. In this work, 3D NZFO/BTO-pillar nanocomposite films were grown on SrTiO3 by template-assisted pulsed laser deposition, where BaTiO3 (BTO) nanopillars appeared in an array with distinct phase transitions as the cores were covered by NiZn ferrite (NZFO) layer. The perfect 3D heteroepitaxial interface between BTO and NZFO phases can be identified without any edge dislocations, which allows effective strain transfer at the 3D interface. The 3D structure nanocomposites enable the strong two magnon scattering (TMS) effect that enhances ME coupling at the interface and reduces the clamping effect by strain relaxation. Thereby, a large FMR field shift of 1866 Oe in NZFO/BTO-pillar nanocomposite...

One of the central challenges in realizing multiferroics-based magnetoelectric memories is to switch perpendicular magnetic anisotropy (PMA) with a control voltage. In this study, we demonstrate electrical flipping of magnetization between the out-of-plane and the in-plane directions in (Co/Pt)3/(011) Pb(Mg1/3Nb2/3)O3–PbTiO3 multiferroic heterostructures through a voltage-controllable spin reorientation transition (SRT). The SRT onset temperature can be dramatically suppressed at least 200 K by applying an electric field, accompanied by a giant electric-field-induced effective magnetic anisotropy field (ΔHeff) up to 1100 Oe at 100 K. In comparison with conventional strain-mediated magnetoelastic coupling that provides a ΔHeff of only 110 Oe, that enormous effective field is mainly related to the interface effect of electric field modification of spin–orbit coupling from Co/Pt interfacial hybridization via strain. Moreover, electric field control of SRT is also achieved at room temperature, resulting in a ...

The trend of mobile Internet requires portable and wearable devices as bio-device interfaces. Electric field control of magnetism is a promising approach to achieve compact, light-weight, and energy-efficient wearable devices. Within a flexible sandwich heterostructure, perpendicular magnetic anisotropy switching was achieved via low-voltage gating control of an ionic gel in mica/Ta/(Pt/Co)

Traditional magnetostrictive/piezoelectric laminated composites rely on the two-dimensional interface that transfers stress/strain to achieve the large magnetoelectric (ME) coupling, nevertheless, they suffer from the theoretical limitation of the strain effect and of the substrate clamping effect in real ME applications. In this work, 3D NZFO/BTO-pillar nanocomposite films were grown on SrTiO

Electric field control of dynamic spin interactions is promising to break through the limitation of the magnetostatic interaction based magnetoelectric (ME) effect. In this work, electric field control of the two-magnon scattering (TMS) effect excited by in-plane lattice rotation has been demonstrated in a La0.7Sr0.3MnO3 (LSMO)/Pb(Mn2/3Nb1/3)-PbTiO3 (PMN-PT) (011) multiferroic heterostructure. Compared with the conventional strain-mediated ME effect, a giant enhancement of ME effect up to 950% at the TMS critical angle is precisely determined by angular resolution of the ferromagnetic resonance (FMR) measurement. Particularly, a large electric field modulation of magnetic anisotropy (464 Oe) and FMR line width (401 Oe) is achieved at 173 K. The electric-field-controllable TMS effect and its correlated ME effect have been explained by electric field modulation of the planar spin interactions triggered by spin–lattice coupling. The enhancement of the ME effect at various temperatures and spin dynamics contr...

One of the central challenges in realizing multiferroics-based magnetoelectric memories is to switch perpendicular magnetic anisotropy (PMA) with a control voltage. In this study, we demonstrate electrical flipping of magnetization between the out-of-plane and the in-plane directions in (Co/Pt)