Search

There is growing concern about the distribution of nanoplastics (NPs) in the central nervous system (CNS), whereas intrusion is poorly understood. In this study, fluorescent-labeled polystyrene NPs (PS-NPs) were microinjected into different areas of zebrafish embryo to mimic different routes of exposure. PS-NPs were observed in the brain, eyes, and spinal cord through gametal exposure. It indicated that maternally derived PS-NPs were specially distributed in the CNS of zebrafish during early development. Importantly, these NPs were stranded in the CNS but not transferred to other organs during development. Furthermore, using neuron GFP-labeled transgenic zebrafish, colocalization between NPs and the neuron cells revealed that NPs were mostly enriched in the CNS surrounded but not the neurons. Even so, the intrusion of NPs into the CNS induced the significant upregulation of some neurotransmitter receptors, leading to an inhibited effect on the movement of zebrafish larvae. This work provides insights into understanding the intrusion and distribution of NPs in the CNS and the subsequent potential adverse effects.

Flexible pressure sensors with high sensitivity over a broad pressure range are highly desired, yet challenging to build to meet the requirements of practical applications in daily activities and more significant in some extreme environments. This work demonstrates a thin, lightweight, and high-performance pressure sensor based on flexible porous phenyl-silicone/functionalized carbon nanotube (PS/FCNT) film. The formed crack-across-pore endows the pressure sensor with high sensitivity of 19.77 kPa -1 and 1.6 kPa -1 in the linear range of 0-33 kPa and 0.2-2 MPa, respectively, as well as ultralow detection limit (∼1.3 Pa). Furthermore, the resulting pressure sensor possesses a low fatigue over 4000 loading/unloading cycles even under a high pressure of 2 MPa and excellent durability (>6000 cycles) after heating at high temperature (200 °C), attributed to the strong chemical bonding between PS and FCNT, excellent mechanical stability, and high temperature resistance of PS/FCNT film. These superior properties set a foundation for applying the single sensor device in detecting diverse stimuli from the very low to high pressure range, including weak airflow, sway, vibrations, biophysical signal monitoring, and even car pressure. Besides, a deep neural network based on transformer (TRM) has been engaged for human action recognition with an overall classification rate of 94.96% on six human actions, offering high accuracy in real-time practical scenarios.

Carbon allotropes comprising sp-hybridized carbon atoms have been investigated for decades for their molecular structure. One of the unsolved mysteries is whether they should take a linear or cyclic configuration in condensed phases due to the lack of atomistic characterizations. Herein, we designed a molecule with a C 6 skeleton as a model system to address this issue, which was achieved by eliminating Br atoms from hexabromobenzene (C 6 Br 6 ) molecule on the Ag(111) substrate via thermal treatment. It is found that the C 6 ring intermediate resulting from complete debromination is energetically unstable at room temperature based on theoretical calculations. It subsequently transforms into the C 6 polyynic chain via a ring-opening process and ultimately polymerizes into the organometallic polyyne, whose triyne structural unit is revealed by bond-resolved noncontact atomic force microscopy. Theoretical calculations demonstrated an energetically favorable pathway in which the ring-opening process occurs after complete debromination of C 6 Br 6 . Our study provides a platform for the synthesis of elusive carbon-rich materials.

Facing the scientific question of the origin of chirality in life, water is considered to play a crucial role in driving many biologically relevant processes in vivo . Water has been demonstrated in vitro to be related to chiral generation, amplification, and inversion, while the underlying mechanism is still not fully understood. Real-space evidence at the single-molecule level is thus urgently required to understand the role of water molecules in biomolecular chirality related issues. Herein, we choose one of the RNA bases, the biomolecule uracil (U), which self-assembles into racemic hydrogen-bonded structures. Upon water exposure, surprisingly, racemic structures could be transformed to homochiral water-involved structures, resulting in an unexpected chiral separation on the surface. The origin of chiral separation is due to preferential binding between water and the specific site of U molecules, which leads to the formation of the energetically most favorable homochiral (U-H 2 O-U) 2 cluster as seed for subsequent chiral amplification. Such a water-driven self-assembly process may also be extended to other biologically relevant systems such as amino acids and sugars, which would provide general insights into the role that water molecules may play in the origin of homochirality in vivo.

A single-molecule-level understanding of the activity of solvating water molecules in hydrogen-bonded assemblies would provide insights into the properties of the first hydration shells. Herein, we investigate the solvation of one of the DNA bases, cytosine, whose glassy-state network formed on Au(111) contains diverse types of hydrogen-bonded dimer configurations with hierarchical strengths. Upon water exposure, a global structural transformation from interwoven chain segments to extended chains was identified by scanning tunneling microscopy and atomic force microscopy. Density functional theory calculation and coarse-grained molecular dynamics simulation indicate that water molecules selectively break the weak-hydrogen-bonded dimers at T-junctions, while the stable ones within chains remain intact. The resulting hydrated chain segments further self-assemble into molecular chains by forming strong hydrogen bonds and spontaneously releasing water molecules. Such an intriguing transformation cannot be realized by thermal annealing, indicating the dynamic nature of water molecules in the regulation of hydrogen bonds in a catalytic manner.

The involvement of metal atoms in molecular assemblies has enriched the structural and functional diversity of two-dimensional supramolecular networks, where metal atoms are incorporated into the architecture via coordination or ionic bonding. Here we present a temperature-variable study of the self-assembly of the 1,3,5-tribromobenzene (TriBB) molecule on Cu(111) that reveals the involvement of nonbonded adatoms in the molecular matrix. By means of scanning tunneling microscopy and noncontact atomic force microscopy, we demonstrate the molecular-level details of a phase transition of TriBB assembly from the close-packed to porous honeycomb structures at 78 K. This is an unexpected transformation because the close-packed phase is thermodynamically favored in view of its higher molecular density and more intermolecular bonds as compared to the honeycomb lattice. A comprehensive density functional theory calculation suggests that Cu adatoms should be involved in the formation of the honeycomb network, where the Cu adatoms help stabilize the molecular assembly via enhanced van der Waals interactions between TriBB molecules and the underlying substrate. Both calculation and experimental results suggest no chemical bonding or direct charge transfer between the adatoms and the molecules, thus the electronic characteristics of the Cu adatoms trapped in the molecular confinement are close to the intrinsic ones on a clean metal surface and different from those in the traditional coordination-bonded framework. The nonbonded metal adatoms embedded self-assemblies may complement the metal-organic coordination system and can be used to tailor the chemical reactivity and electronic properties of supramolecular structures.

From single-pole magnetic tweezers to robotic magnetic-field generation systems, the development of magnetic micromanipulation systems, using electromagnets or permanent magnets, has enabled a multitude of applications for cellular and intracellular measurement and stimulation. Controlled by different configurations of magnetic-field generation systems, magnetic particles have been actuated by an external magnetic field to exert forces/torques and perform mechanical measurements on the cell membrane, cytoplasm, cytoskeleton, nucleus, intracellular motors, etc. The particles have also been controlled to generate aggregations to trigger cell signaling pathways and produce heat to cause cancer cell apoptosis for hyperthermia treatment. Magnetic micromanipulation has become an important tool in the repertoire of toolsets for cell measurement and stimulation and will continue to be used widely for further explorations of cellular/intracellular structures and their functions. Existing review papers in the literature focus on fabrication and position control of magnetic particles/structures (often termed micronanorobots) and the synthesis and functionalization of magnetic particles. Differently, this paper reviews the principles and systems of magnetic micromanipulation specifically for cellular and intracellular measurement and stimulation. Discoveries enabled by magnetic measurement and stimulation of cellular and intracellular structures are also summarized. This paper ends with discussions on future opportunities and challenges of magnetic micromanipulation in the exploration of cellular biophysics, mechanotransduction, and disease therapeutics.

Rationally designed halogenated hydrocarbons are widely used building blocks to fabricate covalent-bonded carbon nanostructures on surfaces through a reaction pathway involving generation and dissociation of organometallic intermediates and irreversible covalent bond formation. Here, we provide a comprehensive picture of the on-surface-assisted homocoupling reaction of 1,3-bis(2-bromoethynyl)benzene on Au(111), aiming for the synthesis of graphdiyne nanostructures. Submolecular resolution scanning tunneling microscopy and noncontact atomic force microscopy observations identify the organometallic intermediates and their self-assemblies formed in the dehalogenation process. The demetallization of the organometallic intermediates at increased temperatures produces butadiyne moieties that spontaneously formed two different covalent structures ( i.e., graphdiyne zigzag chains and macrocycles), whose ratio was found to depend on the initial coverage of organometallic intermediates. At the optimal condition, the stepwise demetallization and cyclization led to a high-yield production of graphdiyne macrocycles up to 95%. Statistical analysis and theoretical calculations suggested that the favored formation of macrocycles resulted from the complex interplay between thermodynamic and kinetic processes involving the organometallic bonded intermediates and the covalently bonded butadiyne moieties.

Conductive polymers are of great importance in a variety of chemistry-related disciplines and applications. The recently developed bottom-up on-surface synthesis strategy provides us with opportunities for the fabrication of various nanostructures in a flexible and facile manner, which could be investigated by high-resolution microscopic techniques in real space. Herein, we designed and synthesized molecular precursors functionalized with benzal  gem-dibromomethyl groups. A combination of scanning tunneling microscopy, noncontact atomic force microscopy, high-resolution synchrotron radiation photoemission spectroscopy, and density functional theory calculations demonstrated that it is feasible to achieve the direct formation of C-C double-bonded structural motifs via on-surface dehalogenative homocoupling reactions on the Au(111) surface. Correspondingly, we convert the sp 3 -hybridized state to an sp 2 -hybridized state of carbon atoms, i. e., from an alkyl group to an alkenyl one. Moreover, by such a bottom-up strategy, we have successfully fabricated poly(phenylenevinylene) chains on the surface, which is anticipated to inspire further studies toward understanding the nature of conductive polymers at the atomic scale.

Wrinkles are ubiquitous for graphene films grown on various substrates by chemical vapor deposition at high temperature due to the strain induced by thermal mismatch between the graphene and substrates, which greatly degrades the extraordinary properties of graphene. Here we show that the wrinkle formation of graphene grown on Cu substrates is strongly dependent on the crystallographic orientations. Wrinkle-free single-crystal graphene was grown on a wafer-scale twin-boundary-free single-crystal Cu(111) thin film fabricated on sapphire substrate through strain engineering. The wrinkle-free feature of graphene originated from the relatively small thermal expansion of the Cu(111) thin film substrate and the relatively strong interfacial coupling between Cu(111) and graphene, based on the strain analyses as well as molecular dynamics simulations. Moreover, we demonstrated the transfer of an ultraflat graphene film onto target substrates from the reusable single-crystal Cu(111)/sapphire growth substrate. The wrinkle-free graphene shows enhanced electrical mobility compared to graphene with wrinkles.

Hetero-epitaxial growth of hexagonal boron nitride (h-BN) from the edges of graphene domains or vice versa has been widely observed during synthesis of in-plane heterostructures of h-BN-G on Rh(111), Ir(111), and even Cu foil. We report that on a strongly coupled Re(0001) substrate via a similar two-step sequential growth strategy, h-BN preferably nucleated on the edges of Re(0001) steps rather than on the edges of existing graphene domains. Statistically, one-third of the domain boundaries of graphene and h-BN were patched seamlessly, and the others were characterized by obvious "defect lines" when the total coverage approached a full monolayer. This imperfect merging behavior can be explained by translational misalignment and lattice mismatch of the resulting separated component domains. According to density functional theory calculations, this coexisting patching and non-patching growth behavior was radically mediated by the strong adlayer-substrate (A-S) interactions, as well as the disparate formation energies of the attachment of B-N pairs or B-N lines along the edges of the Re(0001) steps versus the graphene domains. This work will be of fundamental significance for the controllable synthesis of in-plane heterostructures constructed from two-dimensional layered materials with consideration of A-S interactions.

Focusing and enriching submicrometer and nanometer scale objects is of great importance for many applications in biology, chemistry, engineering, and medicine. Here, we present an acoustofluidic chip that can generate single vortex acoustic streaming inside a glass capillary through using low-power acoustic waves (only 5 V is required). The single vortex acoustic streaming that is generated, in conjunction with the acoustic radiation force, is able to enrich submicrometer- and nanometer-sized particles in a small volume. Numerical simulations were used to elucidate the mechanism of the single vortex formation and were verified experimentally, demonstrating the focusing of silica and polystyrene particles ranging in diameter from 80 to 500 nm. Moreover, the acoustofluidic chip was used to conduct an immunoassay in which nanoparticles that captured fluorescently labeled biomarkers were concentrated to enhance the emitted signal. With its advantages in simplicity, functionality, and power consumption, the acoustofluidic chip we present here is promising for many point-of-care applications.

The structural and electronic properties of monolayer graphene synthesized on a periodically reconstructed substrate can be widely modulated by the generation of superstructure patterns, thereby producing interesting physical properties, such as magnetism and superconductivity. Herein, using a facile chemical vapor deposition method, we successfully synthesized high-quality monolayer graphene with a uniform thickness on Au foils. The hex-reconstruction of Au(001), which is characterized by striped patterns with a periodicity of 1.44 nm, promoted the formation of a quasi-one-dimensional (1D) graphene superlattice, which served as a periodic quasi-1D modulator for the graphene overlayer, as evidenced by scanning tunneling microscopy/spectroscopy. Intriguingly, two new Dirac points were generated for the quasi-1D graphene superlattice located at -1.73 ± 0.02 and 1.12 ± 0.12 eV. Briefly, this work demonstrates that the periodic modulation effect of reconstructed metal substrates can dramatically alter the electronic properties of graphene and provides insight into the modulation of these properties using 1D potentials.

Although the recently discovered monolayer transition metal dichalcogenides exhibit novel electronic and optical properties, fundamental physical issues such as the quasiparticle bandgap tunability and the substrate effects remain undefined. Herein, we present the report of a quasi-one-dimensional periodically striped superstructure for monolayer MoS2 on Au(100). The formation of the unique striped superstructure is found to be mainly modulated by the symmetry difference between MoS2 and Au(100) and their lattice mismatch. More intriguingly, we find that the monolayer MoS2 is heavily n-doped on the Au(100) facet with a bandgap of 1.3 eV, and the Fermi level is upshifted by ∼0.10 eV on the ridge (∼0.2 eV below the conduction band) in contrast to the valley regions (∼0.3 eV below the conduction band) of the striped patterns after high-temperature sample annealing process. This tunable doping effect is considered to be caused by the different defect densities over the ridge/valley regions of the superstructure. Additionally, an obvious bandgap reduction is observed in the vicinity of the domain boundary for monolayer MoS2 on Au(100). This work should therefore inspire intensive explorations of adlayer-substrate interactions, the defects, and their effects on band-structure engineering of monolayer MoS2.

Mass production of high-quality graphene flakes is important for commercial applications. Graphene microsheets have been produced on an industrial scale by chemical and liquid-phase exfoliation of graphite. However, strong-interaction-induced interlayer aggregation usually leads to the degradation of their intrinsic properties. Moreover, the crystallinity or layer-thickness controllability is not so perfect to fulfill the requirement for advanced technologies. Herein, we report a quartz-powder-derived chemical vapor deposition growth of three-dimensional (3D) high-quality graphene flakes and demonstrate the fabrication and application of graphene/g-C3N4 composites. The graphene flakes obtained after the removal of growth substrates exhibit the 3D curved microstructure, controllable layer thickness, good crystallinity, as well as weak interlayer interactions suitable for preventing the interlayer stacking. Benefiting from this, we achieved the direct synthesis of g-C3N4 on purified graphene flakes to form the uniform graphene/g-C3N4 composite, which provides efficient electron transfer interfaces to boost its catalytic oxidation activity of cycloalkane with relatively high yield, good selectivity, and reliable stability.

Atomically thin tungsten disulfide (WS2), a structural analogue to MoS2, has attracted great interest due to its indirect-to-direct band-gap tunability, giant spin splitting, and valley-related physics. However, the batch production of layered WS2 is underdeveloped (as compared with that of MoS2) for exploring these fundamental issues and developing its applications. Here, using a low-pressure chemical vapor deposition method, we demonstrate that high-crystalline mono- and few-layer WS2 flakes and even complete layers can be synthesized on sapphire with the domain size exceeding 50 × 50 μm(2). Intriguingly, we show that, with adding minor H2 carrier gas, the shape of monolayer WS2 flakes can be tailored from jagged to straight edge triangles and still single crystalline. Meanwhile, some intersecting triangle shape flakes are concomitantly evolved from more than one nucleus to show a polycrystalline nature. It is interesting to see that, only through a mild sample oxidation process, the grain boundaries are easily recognizable by scanning electron microscopy due to its altered contrasts. Hereby, controlling the initial nucleation state is crucial for synthesizing large-scale single-crystalline flakes. We believe that this work would benefit the controlled growth of high-quality transition metal dichalcogenide, as well as in their future applications in nanoelectronics, optoelectronics, and solar energy conversions.

We report the synthesis of large-scale uniform graphene films on high carbon solubility substrates of Rh foils for the first time using an ambient-pressure chemical vapor deposition method. We find that, by increasing the cooling rate in the growth process, the thickness of graphene can be tuned from multilayer to monolayer, resulting from the different segregation amount of carbon atoms from bulk to surface. The growth feature was characterized with scanning electron microscopy, Raman spectra, transmission electron microscopy, and scanning tunneling microscopy. We also find that bilayer or few-layer graphene prefers to stack deviating from the Bernal stacking geometry, with the formation of versatile moiré patterns. On the basis of these results, we put forward a segregation growth mechanism for graphene growth on Rh foils. Of particular importance, we propose that this randomly stacked few-layer graphene can be a model system for exploring some fantastic physical properties such as van Hove singularities.

We report the fabrication of a novel epitaxial graphene(EG)/Mn/SiC(0001) sandwiched structure through the intercalation of as-deposited Mn atoms on graphene surfaces, with the aid of scanning tunneling microscope, low energy electron diffraction, and X-ray photoelectron spectroscopy. We found that Mn can intercalate below both sp(3)-hybridized carbon-rich interface layer and monolayer graphene, along with the formation of various embedded Mn islands showing different surface morphologies. The unique trait of the sandwiched system is that the strong interaction between the carbon-rich interface layer and SiC(0001) can be decoupled to some degrees, and contemporaneous, an n-doping effect is observed by mapping the energy band of the system using angle-resolved photoemission spectroscopy. Moreover, what deserves our special attention is that the intercalated islands can only evolve below monolayer graphene when a bilayer coexists, accounting for an intriguing graphene thickness-dependent intercalation effect. In the long run, we believe that the construction of graphene/Mn/SiC(0001) systems offers ideal candidates for exploring some intriguing physical properties such as the magnetic property of two-dimensional transition metal systems.

The synthesis of centimeter-scale uniform graphene on Pt foils was accomplished via a traditional ambient pressure chemical vapor deposition (CVD) method. Using scanning electron microscopy (SEM) and Raman spectroscopy, we reveal the macroscopic continuity, the thickness, as well as the defect state of as-grown graphene. Of particular importance is that the Pt foils after CVD growth have multifaceted texture, which allows us to explore the substrate crystallography effect on the growth rate and the continuity of graphene. By virtue of atomically resolved scanning tunneling microscopy (STM), we conclude that graphene grows mainly in registry with the symmetries of Pt(111), Pt(110), and Pt(100) facets, leading to hexagonal lattices and striped superstructures. Nevertheless, the carbon lattices on interweaving facets with different identities are connected seamlessly, which ensure the graphene growth from nanometer to micrometer levels. With these results, another prototype for clarifying the preliminary growth mechanism of the CVD process is demonstrated as an analogue of graphene on Cu foils., (© 2011 American Chemical Society)