Search

Acute myocardial infarction (AMI) is one of the leading causes of human mortality worldwide. In the early stages of AMI, the patient's electrocardiogram (ECG) may not change, so the fast, sensitive, and accurate detection of the specific biomarker of cardiac troponin I (cTnI) is of great importance in the early diagnosis of AMI. In this work, for the first time, electrostatic nanoaggregates of negatively charged Au nanoparticles and positively charged trisbipyridine ruthenium(II) ions (i.e., (-)AuNPs|[Ru(bpy) 3 ] 2+ ENAs) as novel and signal-amplifying surface-enhanced Raman scattering (SERS) tags were synthesized in an easy and rapid (<3 min) way and applied in the highly sensitive, rapid detection of cTnI in human serum by being combined with an immunochromatographic test strip (ICTS). The synthesized (-)AuNPs|[Ru(bpy) 3 ] 2+ ENAs exhibited strong SERS activity due to the multiple Raman-active units (three bpy ligands) carried by each [Ru(bpy) 3 ] 2+ complex ion and abundant hotspots in each SERS tag. The developed (-)AuNPs|[Ru(bpy) 3 ] 2+ ENAs-based SERS-ICTS has been validated to be applicable in detection of cTnI in human serum with excellent sensing performances, such as fast testing (5 min) and a low detection limit (60 pg/mL). It is envisioned that the developed (-)AuNPs|[Ru(bpy) 3 ] 2+ ENAs-based SERS-ICTS sensor may have promising applications in point of care testing of various biomarkers in clinic. Additionally, this work may inspire the finding and the application of new types of Raman reporter molecules based on high valent metal-multi ligand coordination compounds like [Ru(bpy) 3 ] 2+ .

Non-small-cell lung cancer (NSCLC) is the most prevalent type of lung cancer, and there is an urgent need for developing novel therapies. Sonodynamic therapy exhibits exceptional tissue penetration and minimal harm to healthy tissue, making it extremely promising for cancer treatment. The efficacy of SDT is limited by the intricate immunological microenvironment and the resistance to tumor treatment. This study developed targeted nanoparticles that use ultrasound to concentrate on treating NSCLC. The hybrid targeted nanoparticles utilize gold nanoparticles as their fundamental component, with the outside modified with engineered macrophage exosomes and the aptamer S11e to specifically target NSCLC. Ultrasound could effectively eliminate tumors in NSCLC cells by destroying lysosomes via targeted nanoparticles. Simultaneously, fragmented tumor antigens could effectively activate dendritic cell cells to recruit T cells. This method has significant efficacy in suppressing the development of NSCLC and exhibits potential for therapeutic application.

Appropriately modified thermoresponsive hydrogels, such as poly( N -isopropylacrylamide) hydrogels, bring an opportunity for a variety of biomedical applications. Incorporating compounds with different properties into poly( N -isopropylacrylamide) hydrogels offers opportunities to enhance their mechanical, self-healing ability, adhesiveness, thermal responsiveness, and drug release capabilities. In this study, we investigated the influence of Au-sulfur interactions on the properties of the poly( N -isopropylacrylamide) hydrogels after introducing N,N' -bis(acryloyl)cystine (a newly synthesized cross-linker), modified gold nanoparticles, and a p(NIPAm-BISS) nanogel into the hydrogel matrix. Our findings demonstrated that poly( N -isopropylacrylamide) hydrogels with these compounds exhibited higher mechanical strength (65% tensile stress and 25% elongation), faster thermal responsiveness, controllable self-healing [85% recovery after 2 min, using a NIR laser (800 nm, 0.75 W)], skin adhesiveness, and enhanced drug release (0.08 mg·mL -1 , a 93% improvement). These results may contribute to advancements in the design of temperature-responsive hydrogels tailored for specific biomedical needs, such as targeted drug delivery with the use of a NIR laser and tissue engineering.

Recent advancements in flexible electronics have highlighted their potential in biomedical applications, primarily due to their human-friendly nature. This study introduces a new flexible electronic system designed for motion sensing in a biomimetic three-dimensional (3D) environment. The system features a self-healing gel matrix (chitosan-based hydrogel) that effectively mimics the dynamics of the extracellular matrix (ECM), and is integrated with a highly sensitive thin-film resistive strain sensor, which is fabricated by incorporating a cross-linked gold nanoparticle (GNP) thin film as the active conductive layer onto a biocompatible microphase-separated polyurethane (PU) substrate through a clean, rapid, and high-precision contact printing method. The GNP-PU strain sensor demonstrates high sensitivity (a gauge factor of ∼50), good stability, and waterproofing properties. The feasibility of detecting small motion was evaluated by sensing the beating of human induced pluripotent stem cell (hiPSC)-derived cardiomyocyte spheroids embedded in the gel matrix. The integration of these components exemplifies a proof-of-concept for using flexible electronics comprising self-healing hydrogel and thin-film nanogold in cardiac sensing and offers promising insights into the development of next-generation biomimetic flexible electronic devices.

Temperature-responsive nanostructures with high antimicrobial efficacy are attractive for therapeutic applications against multidrug-resistant bacteria. Here, we report temperature-responsive nanospheres (TRNs) engineered to undergo self-association and agglomeration above a tunable transition temperature ( T t ). The temperature-responsive behavior of the nanoparticles is obtained by functionalizing citrate-capped spherical gold nanoparticles (AuNPs) with elastin-like polypeptides (ELPs). Using protein design principles, we achieve a broad range of attainable T t values and photothermal conversion efficiencies (η). Two approaches were used to adjust this range: First, by altering the position of the cysteine residue used to attach ELP to the AuNP, we attained a T t range from 34 to 42 °C. Then, by functionalizing the AuNP with an additional small globular protein, we could extend this range to 34-50 °C. Under near-infrared (NIR) light exposure, all TRNs exhibited reversible agglomeration. Moreover, they showed an enhanced photothermal conversion efficiency in their agglomerated state relative to the dispersed state. Despite their spherical shape, TRNs have a photothermal conversion efficiency approaching that of gold nanorods (η = 68 ± 6%), yet unlike nanorods, the synthesis of TRNs requires no cytotoxic compounds. Finally, we tested TRNs for the photothermal ablation of biofilms. Above T t , NIR irradiation of TRNs resulted in a 10,000-fold improvement in killing efficiency compared to untreated controls ( p < 0.0001). Below T t , no enhanced antibiofilm effect was observed. In conclusion, engineering the interactions between proteins and nanoparticles enables the tunable control of TRNs, resulting in a novel antibiofilm nanomaterial with low cytotoxicity.

Plasmonic nanoparticles exhibit unique properties that distinguish them from other nanomaterials, including vibrant visible colors, the generation of local electric fields, the production of hot charge carriers, and localized heat emission. These properties are particularly enhanced in the narrow nanogaps formed between nanostructures. Therefore, creating nanogaps in a controlled fashion is the key to achieving a fundamental understanding of plasmonic phenomena originating from the nanogaps and developing advanced nanomaterials with enhanced performance for diverse applications. One of the most effective approaches to creating nanogaps is to assemble individual nanoparticles into a clustered structure. In this study, we present a fast, facile, and highly efficient method for preparing core@satellite (CS) nanoassembly structures using gold nanoparticles of various shapes and sizes, including nanospheres, nanocubes (AuNCs), nanorods, and nanotriangular prisms. The sequential assembly of these building blocks on glass substrates allows us to obtain CS nanostructures with a 100% yield within 4 h. Using 9 different building blocks, we successfully produce 16 distinct CS nanoassemblies and systematically investigate the combinations to search for the highest Raman enhancement. We find that the surface-enhanced Raman scattering (SERS) intensity of AuNC@AuNC CS nanoassemblies is 2 orders of magnitude larger than that of other CS nanoassemblies. Theoretical analyses reveal that the intensity and distribution of the electric field induced in the nanogaps by plasmon excitation, as well as the number of molecules in the interfacial region, collectively contribute to the unprecedentedly large SERS enhancement observed for AuNC@AuNC. This study not only presents a novel assembly method that can be extended to produce many other nanoassemblies but also identifies a highly promising SERS material for sensing and diagnostics through a systematic search process.

Gold nanomaterials have been shown to augment radiation therapy both in vitro and in vivo. However, studies on these materials are mostly phenomenological due to nanoparticle heterogeneity and the complexity of biological systems. Even accurate quantification of the particle dose still results in bulk average biases; the effect on individual cells is not measured but rather the effect on the overall population. To perform quantitative nanobiology, we coated glass coverslips uniformly at varying densities with Au nanoparticle preparations with different morphologies (45 nm cages, 25 nm spheres, and 30 nm rods). Consequently, the effect of a specific number of particles per unit area in contact with breast cancer cells growing on the coated surfaces was ascertained. Gold nanocages showed the highest degree of radiosensitization on a per particle basis, followed by gold nanospheres and gold nanorods, respectively. All three materials showed little cytotoxic effect at 0 Gy, but clonogenic survival decreased proportionally with the radiation dose and particle coverage density. A similar trend was seen in vivo in the combined treatment antitumor response in 4T1 tumor-bearing animals. The presence of gold affected the type and quantity of reactive oxygen species generated, specifically superoxide and hydroxyl radicals, and the concentration of nanocages correlated with the development of more numerous double-stranded DNA breaks and increased protein oxidation as measured by carbonylation. This work demonstrates the dependence on morphology and concentration of radiation enhancement by gold nanomaterials and may lead to a novel method to differentiate intra- and extracellular functionalities of gold nanomedicine treatment strategies. It further provides insights that can guide the rational development of gold nanomaterial-based radiosensitizers for clinical use.

Gold nanoparticles, such as nanorods (AuNRs), present exceptionally high absorption cross sections that can be tuned to the near-infrared (NIR), the optimal window for light penetration in biological tissues. This makes them valuable photosensitizers for the treatment of cancer using photothermal therapy, where absorbed light energy is converted into heat. In addition, there is a strong interest in using hot electron carriers generated in AuNRs by NIR irradiation to produce cytotoxic radical oxygen species in order to enhance the efficiency of the phototherapy. Here, we show that hybrid nanoparticles composed of AuNRs with TiO 2 deposited at their extremities are efficient sensitizers to produce hydroxyl radical species under NIR irradiation. We attribute this phenomenon to the transfer of hot electrons generated from the plasmon excitation in AuNR to the TiO 2 tips, followed by reduction of dioxygen. We then functionalize these hybrid AuNR/TiO 2 nanoparticles with block poly(ethylene glycol)-phosphonate polymer ligands to stabilize them in a physiological medium. We finally demonstrate that the photodynamic effect induces cell death upon irradiation with a greater efficiency than the photothermal effect alone.

Sonodynamic therapy (SDT) has considerable potential in cancer treatment and exhibits high tissue penetration with minimal damage to healthy tissues. The efficiency of SDT is constrained by the complex immunological environment and tumor treatment resistance. Herein, a specific acoustic-actuated tumor-targeted nanomachine is proposed to generate mechanical damage to lysosomes for cancer SDT. The hybrid nanomachine was assembled with gold nanoparticles (GNPs) as the core and encapsulated with macrophage exosomes modified by AS1411 aptamers (GNP@EXO-APs) to optimize the pharmacokinetics and tumor aggregation. GNP@EXO-APs could be specifically transferred to the lysosomes of tumor cells. After induction with ultrasound, GNP@EXO-APs generated strong mechanical stress to produce lysosomal-dependent cell death in cancer cells. Notably, tumor-associated macrophages were reprogrammed in the ultrasound environment to an antitumor phenotype. Enhanced mechanical destruction via GNP@EXO-APs and immunotherapy of cancer cells were verified both in vitro and in vivo under SDT. This study provides a new direction for inside-out killing effects on tumor cells for cancer treatment.

The accurate and effective detection of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is essential to preventing the spread of infectious diseases and ensuring human health. Herein, a nanobody-displayed whole-cell biosensor was developed for colorimetric detection of SARS-CoV-2 spike proteins. Serving as bioreceptors, yeast surfaces were genetically engineered to display SARS-CoV-2 binding of llama-derived single-domain antibodies (nanobodies) with high capture efficiency, facilitating the concentration and purification of SARS-CoV-2. Gold nanoparticles (AuNPs) employed as signal transductions were functionalized with horseradish peroxidase (HRP) and anti-SARS monoclonal antibodies to enhance the detection sensitivity. In the presence of SARS-CoV-2 spike proteins, the sandwiched binding will be formed by linking engineered yeast, SARS-CoV-2 spike proteins, and reporter AuNPs. The colorimetric signal was generated by the enzymatic reaction of HRP and its corresponding colorimetric substrate/chromogen system. At the optimal conditions, the developed whole-cell biosensor enables the sensitive detection of SARS-CoV-2 spike proteins in a linear range from 0.01 to 1 μg/mL with a limit of detection (LOD) of 0.037 μg/mL (about 4 × 10 8 virion particles/mL). Furthermore, the whole-cell biosensor was demonstrated to detect the spike protein of different SARS-CoV-2 variants in human serum, providing new possibilities for the detection of future SARS-CoV-2 variants.

The aggregation of amyloid beta (Aβ) is a hallmark of Alzheimer's disease (AD), a major cause of dementia and an unmet challenge in modern medicine. In this study, we constructed a biocompatible metal-phenolic network (MPN) comprising a polyphenol epigallocatechin gallate (EGCG) scaffold coordinated by physiological Zn(II). Upon adsorption onto gold nanoparticles, the MPN@AuNP nanoconstruct elicited a remarkable potency against the amyloid aggregation and toxicity of Aβ in vitro. The superior performance of MPN@AuNP over EGCG@AuNP was attributed to the porosity and hence larger surface area of the MPN in comparison with that of EGCG alone. The atomic detail of Zn(II)-EGCG coordination was unraveled by density functional theory calculations and the structure and dynamics of Aβ aggregation modulated by the MPN were further examined by discrete molecular dynamics simulations. As MPN@AuNP also displayed a robust capacity to cross a blood-brain barrier model through the paracellular pathway, and given the EGCG's function as an anti-amyloidosis and antioxidation agent, this MPN-based strategy may find application in regulating the broad AD pathology beyond protein aggregation inhibition.

Organic electrochemical transistors (OECTs), particularly the ones based on PEDOT:PSS, are excellent candidates for chemical and biological sensing because of their unique advantages. Improving the sensitivity and stability of OECTs is crucially important for practical applications. Herein, the transconductance of OECT is improved by 8-fold to 14.9 mS by doping the PEDOT:PSS channel with plasmonic gold nanoparticles (AuNPs) using a solution-based process followed by photo annealing. In addition, the OECT also possesses high flexibility and cyclic stability. It is revealed that the doping of AuNPs increases the conductivity of PEDOT:PSS and the photo annealing improves the crystallinity of the PEDOT:PSS channel and the interaction between AuNPs and PEDOT:PSS. These changes lead to the increase in transconductance and cyclic stability. The prepared OECTs are also demonstrated to be effective in sensitive detection of glucose within a wide concentration range of 10 nM-1 mM. Our OECTs based on photo-annealed plasmonic AuNP-doped PEDOT:PSS may find great applications in chemical and biological sensing, and this strategy may be extended to prepare many other high-performance OECT-based devices.

Alzheimer's disease (AD) is a major neurodegenerative disorder primarily characterized by the β-amyloid (Aβ42) misfolding and aggregation-associated multifaceted amyloid toxicity encompassing oxidative stress, neuronal death, and severe cognitive impairment. Modulation of Aβ42 aggregation via various structurally anisotropic macromolecular systems is considered effective in protecting neuronal cells. In this regard, we have developed a cyclic dipeptide (CDP)-based copolymer (CP) and explored its material and biomedical properties. Owing to the structural versatility, CDP-CP forms solvent-dependent anisotropic architectures ranging from dense fibers and mesosheets to vesicles, which are shown to interact with dyes and nanoparticles and mimic synthetic protocells, providing a conceptually new approach to achieve advanced functional materials with the hierarchical organization. CP upon interaction with gold nanoparticles (GNP) and polyoxometalate (POM) generated faceted architectures (CP-GNP) and the nanocomposite (CP-POM), respectively. CP-GNP and CP-POM have shown remarkable ability to inhibit Aβ42 aggregation, dissolve the preformed aggregates, and scavenge reactive oxygen species (ROS) to ameliorate multifaceted amyloid toxicity. In cellulo studies show that CP-GNP and CP-POM protect neuronal cells from Aβ42-induced toxicity and reduce lipopolysaccharide (LPS)-activated neuroinflammation at sub-micromolar concentration. To our knowledge, this is the first report on the hierarchical organization of CDP-CP into 1D-to-2D architectures and their organic-inorganic hybrid nanocomposites to combat the multifaceted amyloid toxicity.

The electrochemical CO 2 reduction into formate acid over Pd-based catalysts under a wide potential window is a challenging task; CO poisoning commonly occurring on the vulnerable surface of Pd must be overcome. Herein, we designed a two-dimensional (2D) AuNP-in-PdNS electrocatalyst, in which the Au nanoparticles are intercalated in Pd nanosheets, for formate production under a wide potential window from -0.1 to -0.7 V versus a reversible hydrogen electrode. Based on the X-ray absorption spectra (XAS) characterizations, CO accumulation detection, and CO stripping voltammetry measurements, we observed that the intercalated Au nanoparticles could effectively avoid the CO formation and boost the formate production on the Pd nanosheet surface by regulating its electronic structure.

Nonvolatile memory (NVM) devices were fabricated by implanting a self-assembled monolayer (SAM) of functional dithienylethene (DTE) derivative on the gold nanoparticle (Au-NP) surface in a pentacene-based organic transistor. The Au-NPs and DTE served as a charge-trapping medium and tunneling barrier layer, respectively. The transfer characteristic of the NVM device showed a narrow hysteresis window and wide memory window, indicating that the DTE-SAM served as a variable barrier layer to regulate the trapping and detrapping of external free charges at the Au-NPs. The energy gap introduced by the DTE-SAM is modulated through photoisomerization between a ring-open form and a ring-closed form by absorbing UV or visible light. For a memory device, the ring-closed DTE allows more free charge injection into the trapping sites, and the ring-open one better retains the trapped charges. A longer anchoring alkanethiol chain at the DTE moiety can further extend the device's retention time. For the NVM operation, programming with the ring-closed DTE and then switching the DTE structure to the ring-open form for erasing can facilitate the charge trapping and charge retention with the same molecule compared to operating all in the ring-open form or all in the ring-closed form of DTE. The structural characterization and electronic characteristics of these devices are discussed in detail.

Huntington's disease (HD) belongs to protein misfolding disorders associated with polyglutamine (polyQ)-rich mutant huntingtin (mHtt) protein inclusions. Currently, it is indicated that the aggregation of polyQ-rich mHtt participates in neuronal toxicity and dysfunction. Here, we designed and synthesized a polyglutamine-specific gold nanoparticle (AuNP) complex, which specifically targeted mHtt and alleviated its toxicity. The polyglutamine-specific AuNPs were prepared by decorating the surface of AuNPs with an amphiphilic peptide (JLD1) consisting of both polyglutamine-binding sequences and negatively charged sequences. By applying the polyQ aggregation model system, we demonstrated that AuNPs-JLD1 dissociated the fibrillary aggregates from the polyQ peptide and reduced its β-sheet content in a concentration-dependent manner. By further integrating polyethyleneimine (PEI) onto AuNPs-JLD1, we generated a complex (AuNPs-JLD1-PEI). We showed that this complex could penetrate cells, bind to cytosolic mHtt proteins, dissociate mHtt inclusions, reduce mHtt oligomers, and ameliorate mHtt-induced toxicity. AuNPs-JLD1-PEI was also able to be transported to the brain and improved the functional deterioration in the HD Drosophila larva model. Our results revealed the feasibility of combining AuNPs, JLD1s, and cell-penetrating polymers against mHtt protein aggregation and oligomerization, which hinted on the early therapeutic strategies against HD.

Electrical circuits require ideal switches with low power consumption for future electronic applications. However, transistors, the most developed electrical switches available currently, have certain fundamental limitations such as increased leakage current and limited subthreshold swing. To overcome these limitations, micromechanical switches have been extensively studied; however, it is challenging to develop micromechanical switches with high endurance and low contact resistance. This study demonstrates highly reliable microelectromechanical switches using nanocomposites. Nanocomposites consisting of gold nanoparticles (Au NPs) and carbon nanotubes (CNTs) are coated on contact electrodes as contact surfaces through a scalable and solution-based fabrication process. While deformable CNTs in the nanocomposite increase the effective contact area under mechanical loads, highly conductive Au NPs provide current paths with low contact resistance between CNTs. Given these advantages, the switches exhibit robust switching operations over 5 × 10 6 cycles under hot-switching conditions in air. The switches also show low contact resistance without subthreshold region, an extremely small leakage current, and a high on/off ratio.

The main requirements for skin-attachable memory devices are flexibility and biocompatibility. We represent a flexible, transparent, and biocompatible resistive switching random access memory (ReRAM) based on gold-decorated chitosan for future flexible and wearable electronics. The device with an Ag/Au-chitosan/Au cross-bar structure shows nonvolatile ReRAM properties. This fabricated Au-chitosan-based biocompatible ReRAM (bioReRAM) shows reliable bipolar memory performance with mechanical flexibility. The device shows essential memory characterizations including long data retention and hundreds of switching cycles. The origin of the resistance switching properties is related to trap-assisted space-charge-limited conduction in the high-resistance state and formation/annihilation of a conductive filament in the low-resistance state. This transparent bioReRAM is a viable candidate for flexible and biodegradable nanoelectronic devices.

Colloidal semiconductor quantum dots (QDs), metal nanoparticles, and cellulose paper are materials with numerous applications in bioanalysis and beyond. The functional properties of QDs and metal NPs are substantially different than those of cellulose, such that their integration with cellulose paper is potentially enabling for many applications. Here, we characterize and evaluate multiple chemistries that modify cellulose paper substrates for the affinity-based immobilization of QDs, gold nanoparticles (Au NPs), and platinum nanoparticles (Pt NPs). These chemistries include grafting of cellulose fibers with imidazole and dithiol groups, as well as the aminosilanization of cellulose fibers (both with and without subsequent grafting with dithiol groups). Cellulose modifications and nanoparticle immobilization are characterized by multiple techniques, including, but not limited to, X-ray photoelectron spectroscopy, scanning electron microscopy, and optical imaging, extinction, and fluorescence measurements. We demonstrate the on-paper immobilization of color-tuned mixtures of QDs, on-paper patterning of QDs by microcontact printing, and post-immobilization enhancement of energy transfer and model assays of protease activity. The robustness of QD photoluminescence is also evaluated between immobilization chemistries. Paper-immobilized Au NPs and Pt NPs are evaluated as potential substrates for SERS and as supported catalysts for a model decolorization reaction. Our cumulative results indicate that there may not be a one-size-fits-all immobilization chemistry. Instead, the immobilization chemistry should be tailored and optimized for the downstream application.

It is very important to control the ionizing radiation dose in radiation therapy, which depends on the accurate and rapid measurement of radiation. Herein, a novel and highly sensitive nanosensor for γ-radiation detection is constructed using single-stranded DNA sequences as radiation-sensitive material and gold nanoparticles (AuNPs) as a signal reporter. Well-dispersed AuNPs gradually aggregated at high salt concentration when the sensor was irradiated, and this change was quantified by the visible spectra and surface plasmon resonance spectra. The radiation nanosensor has excellent linearity in the dose range of 0-100 Gy under optimal conditions. This method is simple and fast, which provides a new path for the γ-radiation dosimeter and has potential applications in the assessment of radiation-induced biological effects.

The interaction between nanoparticles and proteins is a central problem in the nano-bio-fields. However, it is still a great challenge to characterize the specific interaction between nanoparticles and proteins in structural details. Using the Goldbodies, the artificial antibodies created by grafting complementary-determining regions (CDRs) of natural antibodies onto gold nanoparticles, as the models, we manage to identify the key residues of the CDR peptides on gold nanoparticles for the specific interactions by alanine scanning mutagenesis. Each and every residue of the CDR peptides on two Goldbodies (which specifically bind with hen egg white lysozyme and epidermal growth factor receptor, respectively) is mutated to alanine one by one, generating a total of 18 single-mutants of the two Goldbodies. Experimental results reveal that the key residues of the CDR peptides for the specific interactions between the two Goldbodies and the corresponding antigens are exactly the same as those in the natural antibodies, thus proving that the correct conformations of the CDRs of natural antibodies have been successfully reconstructed on AuNPs. This is the first residue-resolution structural illustration for the specific interaction between a designed nanoparticle and a protein.

Current nucleic acid (NA) nanotherapeutic approaches face challenges because of shortcomings such as limited control on loading efficiency, complex formulation procedure involving purification steps, low load of NA cargo per nanoparticle, endosomal trapping, and hampered release inside the cell. When combined, these factors significantly limit the amount of biologically active NA delivered per cell in vitro , delivered dosages in vivo for a prolonged biological effect, and the upscalability potential, thereby warranting early consideration in the design and developmental phase. Here, we report a versatile nanotherapeutic platform, termed auropolyplexes, for improved and efficient delivery of small interfering RNA (siRNA). Semitelechelic, thiolated linear polyethylenimine (PEI) was chemisorbed onto gold nanoparticles to endow them with positive charge. A simple two-step complexation method offers tunable loading of siRNA at concentrations relevant for in vivo studies and the flexibility for inclusion of multiple functionalities without any purification steps. SiRNA was electrostatically complexed with these cationic gold nanoparticles and further condensed with polycation or polyethyleneglycol-polycation conjugates. The resulting auropolyplexes ensured complete complexation of siRNA into nanoparticles with a high load of ∼15,500 siRNA molecules/nanoparticle. After efficient internalization into the tumor cell, an 80% knockdown of the luciferase reporter gene was achieved. Auropolyplexes were applied intratracheally in Balb/c mice for pulmonary delivery, and their biodistribution were studied spatio-temporally and quantitatively by optical tomography. Auropolyplexes were well tolerated with ∼25% of the siRNA dose remaining in the lungs after 24 h. Importantly, siRNA was released from auropolyplexes in vivo and a fraction also crossed the air-blood barrier, which was then excreted via kidneys, whereas >97% of gold nanoparticles were retained in the lung. Linear PEI-based auropolyplexes offer a combination of successful endosomal escape and better biocompatibility profile in vivo . Taken together, combined chemisorption and complexation endow auropolyplexes with crucial biophysical attributes, enabling a versatile and upscalable nanogold-based platform for siRNA delivery in vitro and in vivo .

Transition metal phosphides (TMPs) demonstrate great potential for hydrogen evolution reaction (HER) electrocatalysis, but their activities need further improvement. Herein we report a novel Au incorporation strategy to boost the HER catalytic performance of CoP. As a proof of concept, heterostructured Au/CoP nanoparticles dispersed on nitrogen-doped carbon with unique porosity, denoted as Au/CoP@NC-3, are synthesized by thermal treatment of Au-nanoparticle-incorporated ZIF-67 precursor. It shows excellent HER activity as well as good durability in acidic and alkaline condition, respectively, greatly outperforming its Au-free analogue, namely, CoP@NC. In-depth analysis suggests that the improved HER activity of Au/CoP@NC-3 is attributed to the presence of Au nanoparticles which enlarge the electrochemical active surface areas and adjust the electronic structure of active CoP species to enhance the water adsorption and optimize H adsorption for the accelerated HER process.

In this study, a light sensor is fabricated based on photosystem I (PSI) and a graphene field-effect transistor (FET) that detects light at a high quantum yield under ambient conditions. We immobilized PSI on a micrometer-sized graphene FET using Au nanoparticles (AuNPs) and measured the I - V characteristics of the modified graphene FET before and after light irradiation. The source-drain current ( I sd ) increased upon illumination, exhibiting a photoresponsivity of 4.8 × 10 2 A W -1 , and the charge neutrality point of graphene shifted by -12 mV. This system represents the first successful photosensing system based on proteins and a solution-gated graphene FET. The probable mechanism of this negative shift can be explained by the increase in negative charge carriers in graphene induced by a hole trap in the AuNP resulting from electron transfer from the AuNP to PSI. Photoresponses were only observed in the presence of two surface-active agents, n -hexyltrimethylammonium bromide and sodium dodecylbenzenesulfonate, because they caused the formation of a hydrophobic environment on the surface of the graphene. The lipid layer of these agents caused dissociation of ascorbate ions from the graphene sheet, thereby expanding the Debye screening length of the electrolyte solution. The hydrophobic environment above graphene also enhanced hole storage in the AuNP through electron transfer from the AuNP to PSI.

Noninvasive real-time biosensors to measure glucose levels in the body fluids have been widely investigated for continuous glucose monitoring of diabetic patients. However, they suffered from low sensitivity and reproducibility due to the instability of nanomaterials used for glucose biosensors. Here, we developed a hyaluronate-gold nanoparticle/glucose oxidase (HA-AuNP/GOx) complex and an ultralow-power application-specific integrated circuit chip for noninvasive and robust wireless patch-type glucose sensors. The HA-AuNP/GOx complex was prepared by the facile conjugation of thiolated HA to AuNPs and the following physical binding of GOx. The wireless glucose sensor exhibited slow water evaporation (0.11 μL/min), fast response (5 s), high sensitivity (12.37 μA·dL/mg·cm 2 ) and selectivity, a low detection limit (0.5 mg/dL), and highly stable enzymatic activity (∼14 days). We successfully demonstrated the strong correlation between glucose concentrations measured by a commercially available blood glucometer and the wireless patch-type glucose sensor. Taken together, we could confirm the feasibility of the wireless patch-type robust glucose sensor for noninvasive and continuous diabetic diagnosis.

Semiconducting two-dimensional (2D) transition-metal dichalcogenides (TMDCs) are considered promising sensing materials due to the high surface-to-volume ratio and active sensing sites. However, the reported strategies for 2D TMDCs toward sensing of volatile organic compounds (VOCs) present with some drawbacks. These include high operation temperatures, low gas response, and complex fabrication, limiting the development of room-temperature gas sensors. In this study, 2D MoS 2 nanoflakes were prepared by liquid-phase exfoliation, and their surface was functionalized with Au nanoparticles (NPs) through a facile solution mixing method. MoS 2 decorated with Au NPs with an average size of 10 nm was used as a material platform for an electrochemical sensor to detect a wide variety of VOCs at room temperature. Through dynamic sensing tests, the enhancement of gas-sensing performance in terms of response and selectivity, especially in detecting oxygen-based VOCs (acetone, ethanol, and 2-propanol), was demonstrated. After Au functionalization, the response of the gas sensor to acetone improved by 131% (changing from 13.7% for pristine MoS 2 to 31.6% for MoS 2 -Au(0.5)). Sensing tests under various relative humidity values (10-80%), bending or long-term conditions, indicated the sound robustness and flexibility of the sensor. Density functional theory simulations suggested that the adsorption energy of VOC molecules on MoS 2 -Au is significantly higher than that on pristine MoS 2 , contributing to the gas-sensing enhancement; a VOC-sensing mechanism for Au-decorated MoS 2 nanoflakes was proposed for the first time for the highly sensitive and selective detection of oxygen-based VOCs.

Activated cancer-associated fibroblasts (CAFs) play a major role in the poor outcome in many diseases including pancreatic cancer. Normally quiescent with high lipid content and low proliferative capacity, CAFs receiving cues from cancer cells in the tumor microenvironment become activated and transformed into a lipid-deprived and highly proliferative myofibroblast type phenotype. Therefore, reversal of activated fibroblasts to the quiescence state is an important area of investigation that may help the therapeutic management of a number of diseases including pancreatic cancer. Here, we describe a unique biological function of gold nanoparticles (GNPs) and demonstrate that GNPs may be used to transform activated CAFs to quiescence and provide insights into the underlying molecular mechanisms. Using immortalized and primary patient derived CAFs, we demonstrate that GNPs enhanced lipid content in the cells by inducing expression of lipogenesis genes such as FASN , SREBP2 , and FABP3 . Using pharmacological inhibitors of lipolysis, lipophagy, and fatty acid oxidation, we further demonstrate that CAFs utilized a GNP-induced endogenously synthesized lipid to maintain the quiescent phenotype. Consequently, treatment with GNP sensitizes CAF to FASN inhibitor or FASN siRNA. Hence, GNPs may be used as a tool to probe mechanisms of quiescence in CAFs and help device strategies to target the stromal compartment exploiting the mechanisms of lipid utilization.

Development and use of metamaterials have been gaining prominence in large part due to the possibility of creating platforms with "disruptive" and unique optical properties. However, to date, the majority of such systems produced using micro or nanotechnology are static and can only perform certain target functions. Next-generation multifunctional smart optical metamaterials are expected to have tunable elements with the possibility of controlling the optical properties in real time via variation in parameters such as pressure, mechanical stress, and voltage or through nonlinear optical effects. Here, we address this challenge by developing a thermally controlled optical switch, based on the self-assembly of poly( N-isopropylacrylamide)-functionalized gold nanoparticles on a planar macroscale gold substrate. We show that such meta-surfaces can be tuned to exhibit substantial changes in the optical properties in terms of both wavelength and intensity, through the temperature-controlled variation of the interparticle distance within the nanoparticle monolayer as well as its separation from the substrate. This change is based on temperature-induced auxetic expansion and contraction of the functional ligands. Such a system has potential for numerous applications, ranging from thermal sensors to regulated light harnessing.

A portable and nonlabeled plasmonic biosensor was advanced to enable the sensitive and selective detection of microRNA (miRNA) in a biological sample. miRNAs can act on several key cellular processes, including cell differentiation, cell cycle progression, and function as oncogenes. Detection of circulating miRNAs, especially in blood or urine samples, allows noninvasive and simple diagnosis of diseases. Herein, we report a localized surface plasmon resonance sensor (LSPR) based on an enzyme-assisted target recycling system and a developed LSPR probe for the detection of gastric cancer relevant miRNAs, miR-10b. The sensitivity of the sensor was improved by increasing the concentration of the signal-amplifying agent using the duplex-specific nuclease and by strongly binding the developed LSPR probe, tannic acid capping gold nanoparticles, to the DNA. Under optimal conditions, miR-10b detection could be realized in the range of 5 pM-10 nM with a detection limit of 2.45 pM. This integrated detection system represents an approach to sensitive detection of miRNAs and offers great applications in personalized medicine and monitoring of cancer.

Surface-enhanced Raman scattering (SERS) can provide fingerprint information of analyte molecules with unparalleled sensitivity. However, quantitative analysis using SERS has remained one of the major challenges owing to the difficulty of obtaining reproducible SERS substrates with high-density hotspots. Here, we report the rational design and fabrication of a binary thiol-capped gold nanoparticle (AuNP) monolayer film (MLF) as a substrate for highly sensitive and quantitative SERS analysis. The two thiol ligands chemically bonded to the AuNPs play different roles: dodecanethiol with a long alkyl chain controls the interparticle gaps and electromagnetic coupling among AuNPs and 4-mercaptopyridine works as a Raman internal standard (IS). The binary thiol-capped AuNPs can self-assemble into an ordered MLF with high-density hotspots and uniformly distributed IS. The as-prepared MLF has been demonstrated as a reliable SERS substrate for quantitative detection of fungicide malachite green in aqueous solution, with a high enhancement factor (up to 3.3 × 10 7 ) and a low detection limit (100 pM). Moreover, the MLF SERS substrate is flexible and transparent, which has enabled in situ detection of trace fungicide residues in a shrimp tissue.

Interfaces bearing firmly attached thiol groups are useful for many applications requiring the versatile and facile chemistry of the -SH functionality. In this work, rugged ultrathin films were prepared on substrates using layer-by-layer assembly. The surface of these smooth films was capped with a co-polymer containing benzyl mercaptan units. The utility of this coating was illustrated by three applications. First, thiol-ene "click" chemistry was used to introduce the Arg-Gly-Asp (RGD) adhesive peptide sequence on a surface that otherwise resisted good adhesion of fibroblasts. This treatment promoted cell adhesion and spreading. Similar Michael addition chemistry was employed to attach poly(ethylene glycol) to the surface, which reduced fouling by (adhesion of) serum albumin. Finally, the affinity of gold for -SH was exploited by depositing a layer of gold nanoparticles on the thiolated surface or by evaporating a tenacious film of gold without using the classical chromium "primer" layer.

Synthetic DNA machines that operate on the nanoscale three-dimensional (3D) track have attracted rapidly increasing interest because of their potential in biocomputing, drug delivery, and biosensing applications. Current nanoscale 3D DNA tracks are typically created by self-assembling thiolated oligonucleotides at gold nanoparticle (AuNP) surfaces via the strong Au-S chemistry. However, it remains challenging to accurately control the conformation and orientation of the 3D DNA track on AuNP surfaces and finely adjust the hybridization ability of the 3D track. Herein, we describe for the first time a polyadenine (polyA)-based, spatially isolated 3D DNA track, on which a target-initiated DNAzyme walker moves by a burnt-bridge mechanism with improved efficiency and processivity. PolyA serves as an anchoring block for preferential binding with the AuNP surface, and the appended substrate block adopts an upright conformation that favors the hybridization and subsequent DNAzyme-mediated cleavage. The operation of this target-initiated DNAzyme walker was monitored in real time and at a single-particle level. We tested the cleavage efficiency of 3D substrates with various polyA block lengths, which displayed that the DNAzyme activity was remarkably improved as compared with a thiol-based 3D track. We also explored bioanalytical applications of this DNAzyme nanomachine by movement-triggered cascade signal amplification.

The introduction of nanoparticle-mediated delivery and therapy has revolutionized cancer treatment approaches. However, there has been limited success in clinical trials because current approaches have not simultaneously satisfied therapeutic efficacy and biosafety criteria to an adequate degree. Here, we employ efficient macrophage-mediated exocytosis of elongated nanoparticles to facilitate their localization in tumor cells for cancer therapy and their transport to hepatocytes for hepatobiliary excretion. In vitro studies show that PEGylated high-aspect ratio gold nanoparticles exit macrophages more rapidly and remain in tumor cells longer, compared with low-aspect ratio and spherical nanoparticles. In tumors, high-aspect ratio nanoparticles tend to stay in tumor cells and escape from tumor-associated macrophages when they are taken up by those cells. In the liver, high-aspect ratio nanoparticles cleared by Kupffer cells mostly take the hepatobiliary excretion pathway through efficient Kupffer cell-hepatocyte transfer. Furthermore, we demonstrate that time-dependent localization of elongated gold nanoparticles toward tumor cells in tumor tissues enhances the overall phototherapeutic outcome. Engineering nanoparticles to modulate their exocytosis provides a new approach to improve cancer nanomedicine and pave the way toward clinical translation.

Herein, we presented waxberry-like core-satellite (C-S) nanoparticles (NPs) prepared by an in situ growth of satellite gold NPs on spherical phospholipid bilayer-coated gold cores. The fluidic lipid bilayer cross-linker was reported for the first time, which imparted several novel morphological and optical properties to the C-S NPs. First, it regulated the anisotropic growth of the satellite NPs into vertically oriented nanorods on the core NP surface. Thus, an interesting waxberry-like nanostructure could be obtained, which was different from the conventional raspberry-like C-S structures decorated with spherical satellite NPs. Second, the satellite NPs were "soft-landed" on the lipid bilayer and could move on the core NP surface under certain conditions. The movement induced tunable plasmonic features in the C-S NPs. Furthermore, the fluidic lipid bilayer was capable of not only holding an abundance of reporter molecules but also delivering them to the hotspots at the junctions between the core and satellite NPs, which made the C-S NPs an excellent candidate for preparing ultrasensitive surface-enhanced Raman scattering (SERS) tags. The bioimaging capabilities of the C-S NP-based SERS tags were successfully demonstrated in living cells and mice. The developed SERS tags hold great potential for bioanalysis and medical diagnostics.

Gold nanoparticles (AuNPs) with adsorbed high-density lipoprotein (HDL) have been utilized to deliver oligonucleotides, yet HDL-AuNPs functionalized with small-molecule inhibitors have not been systematically explored. Here, we report an AuNP-based therapeutic system (HDL-AuNPs-BMS) for acute myeloid leukemia (AML) by delivering BMS309403 (BMS), a small molecule that selectively inhibits AML-promoting factor fatty acid-binding protein 4. To synthesize HDL-AuNPs-BMS, we use AuNP as a template to control conjugate size ensuring a spherical shape to engineer HDL-like nanoparticles containing BMS. The zeta potential and size of the HDL-AuNPs obtained from transmission electron microscopy demonstrate that the HDL-AuNPs-BMS are electrostatically stable and 25 nm in diameter. Functionally, compared to free drug, HDL-AuNPs-BMS conjugates are more readily internalized by AML cells and have more pronounced effects on downregulation of DNA methyltransferase 1 (DNMT1), induction of DNA hypomethylation, and restoration of epigenetically silenced tumor suppressor p15 INK4B coupled with AML growth arrest. Importantly, systemic administration of HDL-AuNPs-BMS conjugates into AML-bearing mice inhibits DNMT1-dependent DNA methylation, induces AML cell differentiation, and diminishes AML disease progression without obvious side effects. In summary, these data, for the first time, demonstrate HDL-AuNPs as an effective delivery platform with great potential to attach distinct inhibitors and HDL-AuNPs-BMS conjugates as a promising therapeutic platform to treat leukemia.

Because chiral carboxylic acids (CCAs) are a class of important biological molecules and common functional moieties found in pharmaceutical molecules, the chiral analysis of CCAs has received much attention. Herein, we developed a simple, rapid, and cost-effective method for visual and colorimetric high-throughput analysis of CCAs using chiral di-imine structure-modified gold nanoparticles (C-AuNPs) as the probe. The C-AuNPs are positively charged in the presence of zinc ion, and they can be enantioselectively shielded by the negatively charged CCA enantiomers. Therefore, upon the addition of different concentrations and enantiomeric excess (ee) of CCAs, the C-AuNP-based sensor shows the different levels of aggregation along with the visual changes in solution color, which can achieve simultaneous analysis of the concentration and ee of CCAs. The chiral recognition mechanism based on C-AuNPs was investigated by the determination of binding constants ( K) and molecular simulation methods. Our approach is expected to have the wide-ranging applications in the developing region for enantio-sensing of various chiral drugs and biomolecules.

The development of simple yet powerful methods for monitoring enzyme activity is of great significance. Herein, a facile, convenient, cost-effective, and continuous fluorescent method for the detection of arginase and its inhibitor has been reported based on a host-guest interaction-controlled and enzymatic hydrolysis-controlled luminescent nanoswitch. The fluorescence intensity of 6-aza-2-thiothymine-stabilized gold nanoparticle (ATT-AuNP) is enhanced by l-arginine, owing to the formation of a supramolecular host-guest assembly between the guanidine group of l-arginine and ATT molecules capped on the AuNP surface. However, hydrolysis of l-arginine, catalyzed by arginase, leads to a decrease in the fluorescence intensity of l-arginine/ATT-AuNPs hybrids. Upon incorporation of the arginase inhibitor l-norvaline, the fluorescence of the ATT-AuNP-based detecting system is restored. The linear range of arginase activity determination is from 0.0625 to 1.15 U/mL and the limit of detection is 0.056 U/mL. The half-maximal inhibition value IC 50 of l-norvaline is determined to be 5.6 mM. The practicability of this luminescent nanoswitch is validated by assaying the arginase activity in rat liver and monitoring the response of rat liver arginase to pharmacological agent. Compared to the existing fluorescent method of arginase activity assay, the approach demonstrated here does not involve any complicated technical manipulation, thereby greatly simplifying the detection steps. We propose that this AuNP-based luminescent nanoswitch would find wide applications in the field of life sciences and medicine.

We investigate the plasmonic coupling of metallic nanoparticles with continuous metal films by studying the effect of the particle-to-film distance, cavity geometry, and particle size. To efficiently screen these parameters, we fabricated a particle-to-film-coupled functional nanostructure for which the particle size and distance vary. We use gold-core/poly(N-isopropylacrylamide)-shell nanoparticles to self-assemble a monolayer of well-separated plasmonic particles, introduce a gradient in the nanoparticle size by an overgrowth process, and finally add a coupling metal film by evaporation. These assemblies are characterized using surface probing and optical methods to show localized magnetic and electric field enhancement. The results are in agreement with finite-difference time-domain modeling methods and calculations of the effective permeability and permittivity. Finally, we provide a proof of concept for dynamic tuning of the cavity size by swelling of the hydrogel layer. Thus, the tunability of the coupled resonance and the macroscopic self-assembly technique provides access to a cost-efficient library for magnetic and electric resonances.

Transdermal (TD) drug delivery is a more attractive technique for drug delivery compared to oral and intravenous injection. However, the permeation of drug molecules across the skin is difficult due to the presence of highly ordered lipid barrier. This study details the development of a novel TD system, which has the potential to simultaneously enhance the skin permeability and adhesion behavior. Ibuprofen (IP) was selected as model drug. The ability of gold nanoparticle (AuNP) and hydrophobic titanium nanotube (TNT) to enhance the skin permeability was explored. Additionally, β-cyclodextrin (βCD), which can exceptionally encapsulate poorly water-soluble drugs, is grafted with methacrylates to improve the skin adhesion property. Finally, Au-TNT nanocomposite was deposited onto methacrylate-grafted βCD matrix. The developed material was characterized through NMR spectroscopy, infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and Raman spectroscopy. The characteristics of the film, including water vapor permeability (WVP), thermomechanical properties, etc., were examined in terms of Au-TNT content. The TD delivery of IP with different concentrations of Au-TNT was evaluated via an in vitro skin permeation study through rat skin. It is revealed that the prepared TD film exhibited an improved drug-delivery performance due to the synergistic action of AuNP and hydrophobic TNT. The cumulative percent of IP delivered across the skin is extremely depending on nanofiller content, lipophilicity, and thickness of the membrane, and the device incorporated with 4.0% Au-TNT displayed the best performance. In addition, a study on storage stability was performed by storing the films for 2 months at different temperatures. The study revealed that the device possessed excellent storage stability when stored at low temperature. The developed film offers excellent WVP, drug encapsulation efficiency, thermomechanical properties, and skin adhesion behavior. Moreover, the device was cosmetically attractive, noncytotoxic, and resistant to microbial growth and hence extremely reliable for skin application. The developed skin permeation strategy may open new avenues in TD drug delivery.

Although the antioxidant property of vitamin C is well-known for protecting cells from oxidative stress, a recent study shows that it can also generate oxidative stress under a high intracellular concentration and induce cell death. However, poor chemical stability and low biological concentration (micromolar) of vitamin C restrict its function primarily as an antioxidant. Here, we report two different nanoparticle forms of vitamin C with its intact chemical stability, glucose-responsive release from nanoparticle, and efficient cell delivery in micro to millimolar concentrations. Nanoparticles are composed of silica-coated Au nanoparticles or lipophilic polyaspartic acid-based polymer micelles which are conjugated with vitamin C via phenylboronic acid. Surface chemistry of nanoparticles is optimized for an efficient cellular interaction/uptake and for cell delivery of vitamin C. We found that vitamin C protects cells from oxidative stress at micromolar concentrations, but at millimolar concentrations, it induces cell death by generating oxidative stress. In particular, high-dose vitamin C produces H 2 O 2 , disrupts the cellular redox balance, and induces cell death. This study highlights the concentration-dependent biological performance of vitamin C and the requirement of a high-dose cell delivery approach for enhanced therapeutic benefit.

Because of the critical role of the large neutral amino acid transporter-1 (LAT-1) in promoting tumor growth and proliferation, it is fast emerging as a highly attractive biomarker for the imaging and treatment of human malignancies, including breast cancer. While multibranched gold nanoparticles (AuNPs) have emerged as a promising modality in the photothermal therapy (PTT) of cancers, some of the key challenges limiting their clinical translation lie in the need to develop reproducible and cost-effective synthetic methods as well as the selective accumulation of sufficient AuNPs at tumor sites. In this study, we report a simple and direct seed-mediated synthesis of monodispersed multibranched AuNPs using the catechol-containing LAT-1 ligands, L- and D-dopa, to confer active cancer targeting. This route obviates the need for additional conjugation with targeting moieties such as peptides or antibodies. Nanoflower-like AuNPs (AuNF) with diameters of approximately 46, 70, and 90 nm were obtained and were found to possess excellent colloidal stability and biocompatibility. A significantly higher intracellular accumulation of the L- and D-dopa functionalized AuNFs was observed in a panel of breast cancer cell lines (MCF-7, MDA-MB-231, MDA-MB-468, and MDA-MB-453) when compared to the nontargeting control AuNFs synthesized with dopamine and 4-ethylcatechol. Importantly, no significant difference in uptake between the targeting and nontargeting AuNFs was observed in a non-tumorigenic MCF-10A breast epithelial cell line, hence demonstrating tumor selectivity. For PTT of breast cancer, Ag + was introduced during synthesis to obtain L-dopa functionalized nanourchin-like AuNPs (AuNUs) with strong near-infrared (NIR) absorbance. The L-dopa functionalized AuNUs mediated selective photothermal ablation of the triple negative MDA-MB-231 breast cancer cell line and sensitized the cells to the anticancer drugs cisplatin and docetaxel. This work brings forward an effective strategy for the facile preparation of cancer targeting multibranched AuNPs with potential for the in vivo PTT of breast cancer.

In designing unmodified gold nanoparticles-based aptasensing (uGA) assays for antibiotics, we find that some antibiotics can adsorb directly on gold nanoparticles (GNP) regardless of the presence of aptamers, which have been long overlooked in the past. Some adsorptions, however, would strongly disturb the charge distribution on the GNP surface, break up the static colloidal profile, and thus generate false positive colorimetric signals. To identify antibiotics qualified for uGA assays, we established two rational screening criteria for antibiotic targets relying on their oil-water partition coefficients (log P values) and net physiological charges: log P > 0 and charge ≤0. A good agreement of the GNP color change was obtained between the two criteria-based predictions and the actual tests using six representative antibiotics. The proposed criteria help to shed light on GNP-target interactions, which is significant for developing novel GNP-based colorimetric assays with high reliability.

Au-decorated TiO 2 hollow spheres (Au-THS) have been successfully synthesized via a facile one-pot solvothermal method. The Au-THS hybrid features unique hollow structure with a large specific surface area of 120 m 2 g -1 and homogeneous decoration of Au nanoparticles, giving rise to enhanced light harvesting and charge generation/separation efficiency. When incorporated into the active layer of dye-sensitized solar cells (DSSCs), an improved power conversion efficiency of 7.3% is obtained, which is increased by 37.7% compared with the controlled P25 DSSC. The underlying mechanism to rationalize the efficiency enhancement can be mainly attributed to the strong synergistic effect of superior light scattering ability of the THS and the plasmonic-enhanced effect rendered by the Au nanoparticles.

It is well-known that gold nanoparticle (AuNP) clusters generate strong surface-enhanced Raman scattering (SERS). In order to produce spatially uniform Raman-enhancing substrates at a large scale, we synthesized vertically perforated three-dimensional (3D) AuNP stacks. The 3D stacks were fabricated by first hydrothermally synthesizing ZnO nanowires perpendicular to silicon wafers followed by repetitively performing liquid-phase deposition of AuNPs on the tops and side surfaces of the nanowires. During the deposition process, the nanowires were shown to gradually dissolve away, leaving hollow vestiges or perforations surrounded by stacks of AuNPs. Simulation studies and experimental measurements reveal these nanoscale perforations serve as light paths that allow the excitation light to excite deeper regions of the 3D stacks for stronger overall Raman emission. Combined with properly sized nanoparticles, this feature maximizes and saturates the Raman enhancement at 1-pM sensitivity across the entire wafer-scale substrate, and the saturation improves the wafer-scale uniformity by a factor of 6 when compared to nanoparticle layers deposited directly on a silicon wafer substrate. Using the 3D-stacked substrates, quantitative sensing of adenine molecules yielded concentrations measurements within 10% of the known value. Understanding the enhancing mechanisms and engineering the 3D stacks have opened a new method of harnessing the intense SERS observed in nanoparticle clusters and realize practical SERS substrates with significantly improved uniformity suitable for quantitative chemical sensing.

Development of sensitive, convenient, and cost-effective virus detection product is of great significance to meet the growing demand of clinical diagnosis at the early stage of virus infection. Herein, a naked-eye readout of immunoassay by means of virion bridged catalase-mediated in situ reduction of gold ions and growth of nanoparticles, has been successfully proposed for rapid visual detection of Enterovirus 71 (EV71). Through tailoring the morphologies of the produced gold nanoparticles (GNPs) varying between dispersion and aggregation, a distinguishing color changing was ready for observation. This colorimetric detection assay, by further orchestrating the efficient magnetic enrichment and the high catalytic activity of enzyme, is managed to realize highly sensitive detection of EV71 virions with the limit of detection (LOD) down to 0.65 ng/mL. Our proposed method showed a much lower LOD value than the commercial ELISA for EV71 virion detection. Comparing to the current clinical gold standard polymerase chain reaction (PCR) method, our strategy provided the same diagnostic outcomes after testing real clinical samples. Besides, this strategy has no need of complicated sample pretreatment or expensive instruments. Our presented naked-eye immunoassay method holds a promising prospect for the early detection of virus-infectious disease especially in resource-constrained settings.

Performance of portable technologies from mobile phones to electric vehicles is currently limited by the energy density and lifetime of lithium batteries. Expanding the limits of battery technology requires in situ detection of trace components at electrode-electrolyte interphases. Surface-enhance Raman spectroscopy could satisfy this need if a robust and reproducible substrate were available. Gold nanoparticles (Au NPs) larger than 20 nm diameter are expected to greatly enhance Raman intensity if they can be assembled into ordered monolayers. A three-phase self-assembly method is presented that successfully results in ordered Au NP monolayers for particle diameters ranging from 13 to 90 nm. The monolayer structure and Raman enhancement factors (EFs) are reported for a model analyte, rhodamine, as well as the best performing polymer electrolyte salt, lithium bis(trifluoromethane)sulfonimide. Experimental EFs for the most part correlate with predictions based on monolayer geometry and with numerical simulations that identify local electromagnetic field enhancements. The EFs for the best performing Au NP monolayer are between 10 6 and 10 8 and give quantitative signal response when analyte concentration is changed.

The assembly of gold nanoparticles (AuNPs) to AuNP assemblies is of interest for cancer therapy and imaging. Herein we introduce a new and general paradigm, thermally triggered AuNP assembly, for the development of novel intelligent platforms for cancer photothermal therapy (PTT) and multimodal imaging. Site-specific conjugation of a thermally sensitive elastin-like polypeptide (ELP) to AuNPs yields thermally sensitive ELP-AuNPs. Interestingly, ELP-AuNPs can in situ form AuNP assemblies composed of short necklace-like gold nanostructures at elevated temperatures and thus show strong near-infrared light absorption and high photothermal effect. These thermally responsive properties of ELP-AuNPs enable simultaneous photothermal/photoacoustic/X-ray computed tomographic imaging and PTT of melanoma after single intratumoral injection of ELP-AuNPs. The thermally triggered assembly of a variety of nanoparticles with optical, electronic, and magnetic properties into nanoparticle assemblies may open new ways for the establishment of intelligent platforms for various applications in biomedicine.

High-density lipoprotein (HDL) plays an important role in the transport and metabolism of cholesterol. Mimics of HDL are being explored as potentially powerful therapeutic agents for removing excess cholesterol from arterial plaques. Gold nanoparticles (AuNPs) functionalized with apolipoprotein A-I and with the lipids 1,2-dipalmitoyl-sn-glycero-3-phosphocholine and 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine-N-[3-(2-pyridyldithio)propionate] have been demonstrated to be robust acceptors of cellular cholesterol. However, detailed structural information about this functionalized HDL AuNP is still lacking. In this study, we have used X-ray photoelectron spectroscopy and lecithin/cholesterol acyltransferase activation experiments together with coarse-grained and all-atom molecular dynamics simulations to model the structure and cholesterol uptake properties of the HDL AuNP construct. By simulating different apolipoprotein-loaded AuNPs, we find that lipids are oriented differently in regions with and without apoA-I. We also show that in this functionalized HDL AuNP, the distribution of cholesteryl ester maintains a reverse concentration gradient that is similar to the gradient found in native HDL.

We present an interesting phenomenon, "atomic force masking", which is the deposition of a few-nanometer-thick gold film on ultrathin low-molecular-weight (LMW) polydimethylsiloxane (PDMS) engineered on a polycrystalline gold thin film, and demonstrated the formation of hot spot based on SERS. The essential principle of this atomic force masking phenomenon is that an LMW PDMS layer on a single crystalline grain of gold thin film would repel gold atoms approaching this region during a second cycle of evaporation, whereas new nucleation and growth of gold atoms would occur on LMW PDMS deposited on grain boundary regions. The nanostructure formed by the atomic force masking, denoted here as "hot spots on grain boundaries" (HOGs), which is consistent with finite-difference time-domain (FDTD) simulation, and the mechanism of atomic force masking were investigated by carrying out systematic experiments, and density functional theory (DFT) calculations were made to carefully explain the related fundamental physics. Also, to highlight the manufacturing advantages of the proposed method, we demonstrated the simple synthesis of a flexible HOG SERS, and we used this substrate in a swabbing test to detect a common pesticide placed on the surface of an apple.

The controlled attachment of thiolated DNA to gold nanoparticles (AuNPs) dictates many applications. This is typically achieved by either "aging-salting" processes or low-pH method, where either Na + or H + is used to minimize charge repulsion and facilitate attachment of thiolated DNA onto AuNPs. However, the "aging-salting" process takes a long time, and is prone to aggregation when used with larger AuNPs. Surfactants are needed to precoat and thereby enhance the stability of AuNPs. The low-pH method can disrupt the structural integrity of DNAs. We report here an oligoethylene glycol (OEG) spacer-assisted method that enables quantitative and instantaneous attachment at physiological pH without the need for surfactants. The method is based on our finding that an uncharged OEG spacer as short as six EG units can effectively shield against repulsion between AuNPs and DNAs, substantially enhancing both the adsorption kinetics and thermodynamics of thiolated DNAs. We applied this to thiolated DNAs of various lengths and thiol modification positions and to large AuNPs. Importantly, our method also allows for the direct immobilization of thiolated molecular beacons (MB), and avoids particle aggregation due to intermolecular hydrogen bonding. The prepared MB-AuNPs were successfully used for the fluorescent detection of target DNA at nanomolar concentrations. The OEG spacer appears to offer a highly effective parameter for tuning DNA adsorption kinetics and thermodynamics besides pH and salt, providing a novel means for highly controllable and versatile functionalization of AuNPs.