Search

In this study, a conductive patch for a flexible organic optoelectronic device is proposed and implemented using a poly(3,4-ethylenedioxythiophene):polystyrenesulfonate (PEDOT:PSS) polymer electrode based on a transfer process to achieve its high conductivity with an efficient conductive pathway. This PEDOT-dominant surface is induced by phase inversion during the transfer process owing to the solvent affinity of the PSS phase. The PEDOT:PSS patch formed by the transfer process minimizes the power loss in a flexible optoelectronic device due to the improved charge collection and suppressed leakage current responses. In addition, the bending stability of the flexible photoelectronic device is also enhanced by maintaining performance for 1000 bending cycles. Therefore, in the fabrication of a transparent flexible conductive PEDOT:PSS patch, the transfer process of a conducting polymer constitutes an effective strategy that can improve conductivity and embellished morphology.

In solid substrates, colloidal solutions produce irregular deposits on the surface by Marangoni flow and capillary flow during evaporation. Reportedly, perovskite quantum dots (PQDs) as a colloidal solution have irregular surfaces based on a similar principle as the coffee ring effect in QD systems when droplets evaporate from the substrate. Given that this issue is due to the direction of Marangoni and capillary flows, the substrate is tilted to change the direction of the flows. The appropriate angle is determined by controlling the angle of the substrate so that the two flows circulate similarly; this method is called "assembly-coating". Herein, we compare the PL intensity before and after the thermal evaporation of the thin films prepared by conventional and assembly-coating. Moreover, by characterizing the diode device (hole-only space charge limited current) for each coating process, the charge carrier characteristics are investigated in detail. Therefore, we suggest a facile strategy to obtain a uniform surface and thermal evaporative stability using colloidal solutions. This strategy is effective in designing surface uniformity and light-emitting layers for colloidal solution deposition and assembly.

Lead-free perovskite solar cells (PSCs) have attracted interest among scientists searching for eco-friendly energy harvesting devices. Herein, the effects of ozone exposure on poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) in lead-free tin halide PSCs as a facile and low-cost process for improving device performance are analyzed. Two types of tin-based PSCs and one typical lead-based PSC were fabricated. The ozone exposure on PEDOT:PSS increases the short-circuit current density ( J SC ) and the fill factor (FF) of PSCs in all cases with perovskite grain enlargement and hole-mobility enhancement of the devices, respectively. For open-circuit voltage ( V OC ), the outcome depends on the band gap and the energy levels of the perovskite films. While ozone exposure treatment is favorable for PEA 0.15 FA 0.85 SnI 3 -based tin PSCs, V OC decreases with ozone exposure in the case of Ge:EDA 0.01 FA 0.98 SnI 3 -based tin PSCs because of a misalignment of the energy levels. Regardless, the efficiency of PEA 0.15 FA 0.85 SnI 3 -based tin PSCs increases from 8.7 to 10.1% when measured inside a glovebox upon ozone exposure of PEDOT:PSS. The efficiency of Ge:EDA 0.01 FA 0.98 SnI 3 -based tin PSCs increases from 6.8 to 8.1%, and the devices retain an efficiency of 5.0% even after 50 days in air.

Fully inorganic black orthorhombic (B-γ) CsSnI 3 has become a promising candidate for perovskite solar cell (PSC) thanks to its low toxicity and decently high theoretical power conversion efficiency (PCE). However, so far, the reported PCE of the B-γ CsSnI 3 PSC is still not comparable with its lead-based or organotin-based counterparts. Herein, a mixed electron transport layer (ETL) composed of ZnO nanoparticles (NPs) and [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) is incorporated into inverted B-γ CsSnI 3 PSCs. The mixed ETL exhibits the merits of both ZnO and PCBM. The highest PCE of 6.08% was recorded for the PSC with mixed ZnO-PCBM ETL, which is 34.2% higher than that of the device with plain PCBM ETL (PCE of 4.53%) and 28.8% superior to that of plain ZnO ETL-based device (PCE of 4.72%). Meanwhile, the mixed ZnO-PCBM ETL-based PSC retained 71% of its initial PCE under inert conditions at room temperature after 60 days of storage and maintained 67% PCE after 20 days of storage under ambient air at 30% relative humidity and room temperature.

The class of organic-inorganic lead halides with perovskite crystal structures has recently emerged as promising materials for a variety of practical optoelectronic applications. In particular, hybrid halide perovskite quantum dots possess excellent intrinsic optoelectronic properties such as high color purity (full width at half-maximum of 24.59 nm) and photoluminescence quantum yields (92.7%). In this work, we demonstrate the use of perovskite quantum dot materials as an emissive layer of hybrid light-emitting transistors. To investigate the working mechanism of perovskite quantum dots in light-emitting transistors, we investigated the electrical and optical characteristics under both p-channel and n-channel operation. Using these materials, we have achieved perovskite quantum dot light-emitting transistors with high electron mobilities of up to 12.06 cm 2 ·V -1 s -1 , high brightness of up to 1.41 × 10 4 cd m -2 , and enhanced external quantum efficiencies of up to 1.79% operating at a source-drain potential of 40 V.

The stamping transfer process, which provides a precise patterning of the target material without the limitation of an underlying layer, has attracted significant attention for large-scale roll-to-roll fabrication. Despite the need to minimize the peeling energy, expressed as the sum of adhesion energies, for a simple transfer process, many studies have not considered this effect. In this study, we introduced a wetting coefficient related with adhesions between polymers for the transfer design of organic photosensitive materials. We observed a difference in adhesion between polymer blends depending on the surface energy of the mold. We designed high-surface-energy polyurethane acrylate to enable a residue-free transfer process. The transfer process significantly contributed to the device stability through changes in dark currents, photocurrents, responsivity, and detectivity over time, compared to spin coating. In particular, the detectivity was maintained over 95% after 360 h, and no burn-in loss of internal resistance was observed in the device with a transferred active layer. X-ray photoelectron spectroscopy showed that a large interfacial change between poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) and poly(4,8-bis[(2-ethylhexyl)oxy]benzo[1,2- b:4,5- b']dithiophene-2,6-diyl- alt-3-fluoro-2-[(2-ethylhexyl)carbonyl]thieno[3,4- b]thiophene-4,6-diyl):[6,6] phenyl C 71 butyric acid methyl ester obtained through spin coating occurred owing to solution penetration, whereas the transfer process provided a constant interface owing to morphology stabilization. Therefore, the transfer process with optimized adhesion properties can improve the device operation durability without burn-in loss, enabling a cost-effective fabrication of organic optoelectronic devices.

The study of interlayers is important to enhance the performance of inverted perovskite solar cells (PSCs) because interlayers in PSCs align energy levels and improve charge transport. However, previous research into applying interlayers for PSCs has focused only on wet-coated methods, such as spin coating, to form the interlayer. Here, we fabricated planar-type PSCs deposited with a 6,6-phenyl-C 71 butyric acid methyl ester (PC 71 BM) layer onto a CH 3 NH 3 PbI 3 (MAPbI 3 ) layer by stamping transfer through a relatively dry process condition. We demonstrated the effects of a stamping-transferred PC 71 BM layer using polyurethane acrylate (PUA), the surface energy of which was modified by 2-hydroxyethyl methacrylate (HEMA) to increase the transfer reproducibility. In PSCs with a stamping-transferred PC 71 BM layer, we observed an enhanced J SC and a comparable power conversion efficiency (PCE), which were caused by an enhanced coverage of the electron transport layer onto the MAPbI 3 layer with preserved crystallinity, which occurs owing to improved electron mobility and exciton dissociation. The optimized device PCE through the dry-transferred PC 71 BM exhibited a J SC , fill factor, and PCE of 21.65 mA/cm 2 , 76.0%, and 15.46%, respectively. Moreover, morphological analysis and electrical measurements confirmed the improved durability of dry-stamping-transferred PSCs.

Metallic nanoparticles (NPs) exhibit a localized surface plasmon resonance (LSPR) and act as scattering centers and subwavelength antennas, so metallic NPs can be incorporated into perovskite solar cells (PSCs) to effectively improve the light absorption of light harvesting devices. Here, we have embedded Au nanoparticles (NPs) into the hole transport layer (HTL) of the PSCs to investigate the photovoltaic effect of the PSCs with Au NPs. Interestingly, it was found that Au NPs dispersed spiro-OMeTAD HTL solution could naturally end up located near the perovskite layer as the result of the spin-coating step. Solar cell performance observations indicate that the LSPR and electrical effects of Au NPs enhance the photovoltaic response of PSCs, in spite of a slight decrease in the open-circuit voltage (VOC), by causing an incredible improvement in the photocurrent density as a dominant factor.

Organic photovoltaic devices are difficult to commercialize because of their vulnerability to chemical degradation related with oxygen and water and to physical degradation with aging at high temperatures. We investigated the photophysical degradation behaviors of a series of poly(3-hexylthiophene) (P3HT)/[6,6]-phenyl C61-butyric acid methyl ester (PC60BM) bulk heterojunctions (BHJs) as a model system according to the donor-acceptor ratio. We found that the optimum P3HT:PC60BM ratio in terms of long-term stability differs from that in terms of initial cell efficiency. On the basis of cell performance decays and time-resolved photoluminescence measurements, we investigated the effects of oxygen and material self-aggregation on the stability of an organic photovoltaic device. We also observed the changes in morphological geometry and analyzed the surface elements to verify the mechanisms of degradation.

This paper describes two different processes to synthesize vertically aligned hematite nanorod and nanotube arrays, respectively, on a conductive substrate by the electrochemical deposition method with the help of an anodized aluminum oxide nanotemplate. The two types of nanostructured hematite were used as the photoanode for photoelectrochemical cells. The hematite nanotubes exhibited much higher photoelectrochemical activity than the hematite nanorods, including an improved photocurrent density, more negative onset potential, better photon harvesting, and better charge carrier transfer ability. The observed behavior may offer new information to enhance the photocatalytic ability of hematite, which is considered to be one of the best photoanode materials in the research field of photoelectrochemical cells., (© 2011 American Chemical Society)