Search

Solar thermoelectric generators (STEGs) consisting of solar absorbers and thermoelectric generators (TEGs) can utilize solar energy to generate electrical power. However, performances of STEGs are limited by the heat losses of solar absorbers in air, which become more and more significant with an increase in the solar absorbing area. Herein, we describe the preparation of Au@AgPd nanostructure monolayer/poly(vinyl alcohol) (PVA) Janus photothermal films with broadband plasmonic absorption in the visible and near-infrared regions. By uniaxially stretching the Janus film, Au@AgPd can align along the stretching direction, which creates particle-in-cavity structures on the PVA surface. Benefiting from the oriented plasmonic particle-in-cavity configuration, the Janus films effectively convert sunlight into heat, trap the heat within their micrometer-depth structure, and facilitate its transfer along the direction of the nanostructure orientation. Integration of the Janus films with commercial TEGs allows thermal concentration onto a small thermoelectric surface, yielding an open-circuit voltage of 308 mV under 102 mW/cm 2 natural sunlight illumination. Heat losses in commercial TEGs integrated with Janus films are reduced by approximately 50% while maintaining the same voltage output. Furthermore, incorporating the Janus films into a conventional STEG with carbon-based solar absorbers significantly enhances solar-thermal-electric conversion performance, achieving an output power density of 1.3 W m -2 . Our design of Janus photothermal films with oriented particle-in-cavity surfaces can be extended to various solar-thermal systems for high-efficiency solar energy conversion and heat management.

Solar-thermal water evaporation is a promising technology for pure water production. However, the design of low-cost systems for efficient antifouling solar-thermal water evaporation remains a challenge. Herein, an evaporator based on metal oxy-hydroxides with a hierarchical and hollow structure is rationally designed through material selection and structural engineering. The obtained evaporator possesses good light absorption performance, excellent antifouling property against oil, and enhanced heat localization ability. Consequently, the water evaporation rate reaches as high as 1.65 kg m -2 h -1 with a solar-thermal conversion efficiency up to 82.3% under 1 sun illumination. More importantly, the evaporator exhibits almost identical evaporation performance in oily wastewater and natural seawater due to its superhydrophilicity and underwater superoleophobicity. This work provides a worth-adopted approach to prepare solar-thermal evaporators with high efficiency and anti-oil-fouling property, highlighting the new application of metal oxy-hydroxide-based materials and the importance of a hierarchical and hollow structure for efficient solar-thermal water evaporation.

Solar steam generation is receiving considerable interest because of its potential application in wastewater treatment and desalination. Many devices with various photothermal materials and structures have been demonstrated to be solar steam evaporators by improving their light absorption, heat loss, water transportation, and vapor escape. However, developing a biomass-based evaporator with heat localization and rapid water transportation is highly desired yet still challenging. Here, corncobs, a kind of agricultural waste with vascular bundle and "vesiculose" structures, are used to fabricate solar steam-generation devices. After high-temperature treatment, the carbonized corncobs maintain the highly anisotropic porous framework and favorable hydrophilicity and thereby have excellent thermal management and water transportation. With efficient solar absorption, heat localization, and rapid water transportation, the lightweight carbonized corncobs can float on water and generate water vapor with a high steam generation efficiency of 86.7% under 1 sun.

Steam generation by eco-friendly solar energy has immense potential in terms of low-cost power generation, desalination, sanitization, and wastewater treatment. Herein, highly efficient steam generation in a bilayer solar steam generator (BSSG) is demonstrated, which is comprised of a large-area SnSe-SnSe 2 layer deposited on a glassy carbon foam (CF). Both CF and SnSe-SnSe 2 possess high photothermal conversion capabilities and low thermal conductivities. The combined bilayer system cumulatively converts input solar light into heat through phonon-assisted transitions in the indirect band gap SnSe-SnSe 2 layer, together with trapping of sunlight via multiple scattering due to the porous morphology of the CF. This synergistic effect leads to efficient broadband solar absorption. Moreover, the low out-of-plane thermal conductivities of SnSe-SnSe 2 and CF confine the generated heat at the evaporation surface, resulting in a significant reduction of heat losses. Additionally, the hydrophilic nature of the acid-treated CF offers effective water transport via capillary action, required for efficient solar steam generation in a floating form. A high evaporation rate (1.28 kg m -2 h -1 ) and efficiency (84.1%) are acquired under 1 sun irradiation. The BSSG system shows high recyclability, stability, and durability under repeated steam-generation cycles, which renders its practical device applications possible.

Sun-driven steam generation is now possible and has the potential to help meet future energy needs. Current technologies often use solar condensers to increase solar irradiance. More recently, a technology for solar steam generation that uses heated surface water and low optical concentration is reported. In this work, a commercially available activated carbon fiber felt is used to generate steam efficiently under one sun illumination. The evaporation rate and solar conversion efficiency reach 1.22 kg m -2 h -1 and 79.4%, respectively. The local temperature of the evaporator with a floating activated carbon fiber felt reaches 48 °C. Apart from the high absorptivity (about 94%) of the material, the evaporation performance is enhanced thanks to the well-developed pores for improved water supply and steam escape and the low thermal conductivity, which enables reduced bulk water temperature increase. This study helps to find a promising material for solar steam generation using a water evaporator that can be produced economically (∼6 $/m 2 ) with long-term stability.

Solar vapor generation is a promising and whole new branch of photothermal conversion for harvesting solar energy. Various materials and devices for solar thermal conversion were successively produced and reported for higher solar energy utilization in the past few years. Herein, a compact device of reduced graphene oxides (rGO) and paper fibers was designed and assembled for efficient solar steam generation under light illumination, and it consists of water supply pipelines (WSP), a thermal insulator (TI) and a double-sided absorbing film (DSF). Heat localization is enabled by the black DSF due to its broad absorption of sunlight. More importantly, the heat transfer, from the hot DSF to the cold base fluid (water), was suppressed by TI with a low thermal conductivity. Meanwhile, bulk water was continuously transported to the DSF by WSP through TI, which was driven by the surface energy and surface tension based on the capillary effect. The effects of reduction degrees of rGO on the photothermal conversion were explored, and the evaporation efficiency reached 89.2% under one sun with 60 mg rGO. This new microdevice provided a basic technical support for distillation, desalination, sewage treatment, and related technologies.