Search

Block copolymers (BCPs) are particularly effective in creating soft nanostructured templates for transferring complex 3D network structures into inorganic materials that are difficult to fabricate by other methods. However, achieving control of the local ordering within these 3D networks over large areas remains a significant obstacle to advancing material properties. Here, we address this challenge by directing the self-assembly of a 3D alternating diamond morphology by solvent vapor annealing of a triblock terpolymer film on a chemically patterned substrate. The hexagonal substrate patterns were designed to match a (111) plane of the diamond lattice. Commensurability between the sparse substrate pattern and the BCP lattice produced a uniformly ordered diamond network within the polymer film, as confirmed by a combination of atomic force microscopy and cross-sectional imaging using focused ion beam scanning electron microscopy. The successful replication of the complex and well-ordered 3D network structure in gold promises to advance optical metamaterials and has potential applications in nanophotonics.

The reinforcement of polymer nanocomposites can be achieved through alignment or percolation of cellulose nanocrystals (CNCs). Here, we compare the efficacy of these reinforcement mechanisms in thermoplastic polyurethane (PU) elastomer nanocomposites containing thermally stable cotton CNCs. CNC alignment was achieved by melt spinning nanocomposite fibers, while a percolating CNC network was generated by solvent casting nanocomposite films with CNC contents up to 20 wt %. While in films both the CNCs and the PU matrix were entirely isotropic at all concentrations as confirmed by wide-angle X-ray scattering and birefringence analysis, the CNCs in the fibers exhibited a preferential orientation, which improved with increasing CNC concentration. Increasing the CNC concentration in the fibers reduces, however, the alignment of the PU chains, resulting in an entirely isotropic PU matrix at high CNC contents. The mechanical properties of films and fibers were evaluated using stress-strain measurements. Nanocomposite fibers with low CNC content exhibited superior stiffness, extensibility, and strength compared to the films, while the films displayed superior mechanical properties at high CNC concentrations. These findings are rationalized using common semiempirical models describing the reinforcing effects of CNC alignment in fibers (Halpin-Tsai) and CNC percolation in films (percolation model). The formation of a percolating CNC network leads to a stronger reinforcement than CNC alignment, as the reinforcing effect of the latter is limited by the comparably low aspect ratio of CNCs extracted from cotton. As a consequence, above the percolation threshold for cotton CNCs, isotropic nanocomposite PU films show a higher stiffness than aligned nanocomposite PU fibers.

Mesoporous titania microspheres (MTMs) have been employed in many applications, including (photo)catalysis as well as energy conversion and storage. Their morphology offers a hierarchical structural design motif that lends itself to being incorporated into established large-scale fabrication processes. Despite the fact that device performance hinges on the precise morphological characteristics of these materials, control over the detailed mesopore structure and the tunability of the pore size remains a challenge. Especially the accessibility of a wide range of mesopore sizes by the same synthesis method is desirable, as this would allow for a comparative study of the relationship between structural features and performance. Here, we report a method that combines sol-gel chemistry with polymer micro- and macrophase separation to synthesize porous titania spheres with diameters in the micrometer range. The as-prepared MTMs exhibit well-defined, accessible porosities with mesopore sizes adjustable by the choice of the polymers. When applied as an anode material in lithium ion batteries (LIBs), the MTMs demonstrate excellent performance. The influence of the pore size and an in situ carbon coating on charge transport and storage is examined, providing important insights for the optimization of structured titania anodes in LIBs. Our synthesis strategy presents a facile one-pot approach that can be applied to different structure-directing agents and inorganic materials, thus further extending its scope of application.

A few percent of transition metals impregnated inside some biological organisms in nature remarkably improve such organisms' mechanical stability. Although the lure to emulate them for development of new biomimetic structural materials has been great, the practical advances have been rare because of the lack of proper synthetic approaches. Multiple pulsed vapor phase infiltration proved successful for the preparation of such transition metal impregnated materials with highly improved mechanical stability. The artificially infiltrated metals (Al, Ti, or Zn) from gas phase lead to around 3 times increase of toughness (in terms of breaking energy) of natural collagen in a dried state. In addition, the infiltrated metals apparently induce considerable crystallographic changes in the natural collagen structures. This infiltration approach can be used as guide for the synthesis of bioinspired structural materials related to metal infiltration.