Search

Many nano- and microstructured devices capable of promoting neuronal growth and network formation have been previously investigated. In certain cases, topographical cues have been successfully complemented with external bias, by employing electrically conducting scaffolds. However, the use of optical stimulation with topographical cues was rarely addressed in this context, and the development of light-addressable platforms for modulating and guiding cellular growth and proliferation remains almost completely unexplored. Here, we develop high aspect ratio micropillars based on a prototype semiconducting polymer, regioregular poly(3-hexylthiophene-2,5-diyl) (P3HT), as an optically active, three-dimensional platform for embryonic cortical neurons. P3HT micropillars provide a mechanically compliant environment and allow a close contact with neuronal cells. The combined action of nano/microtopography and visible light excitation leads to effective optical modulation of neuronal growth and orientation. Embryonic neurons cultured on polymer pillars show a clear polarization effect and, upon exposure to optical excitation, a significant increase in both neurite and axon length. The biocompatible, microstructured, and light-sensitive platform developed here opens up the opportunity to optically regulate neuronal growth in a wireless, repeatable, and spatio-temporally controlled manner without genetic modification. This approach may be extended to other cell models, thus uncovering interesting applications of photonic devices in regenerative medicine.

A major problem of current biomedical implants is the bacterial colonization and subsequent biofilm formation, which seriously affects their functioning and can lead to serious post-surgical complications. Intensive efforts have been directed toward the development of novel technologies that can prevent bacterial colonization while requiring minimal antibiotics doses. To this end, biocompatible materials with intrinsic antifouling capabilities are in high demand. Silk fibroin, widely employed in biotechnology, represents an interesting candidate. Here, we employ a soft-lithography approach to realize micro- and nanostructured silk fibroin substrates, with different geometries. We show that patterned silk film substrates support mammal cells (HEK-293) adhesion and proliferation, and at the same time, they intrinsically display remarkable antifouling properties. We employ Escherichia coli as representative Gram-negative bacteria, and we observe an up to 66% decrease in the number of bacteria that adhere to patterned silk surfaces as compared to control, flat silk samples. The mechanism leading to the inhibition of biofilm formation critically depends on the microstructure geometry, involving both a steric and a hydrophobic effect. We also couple silk fibroin patterned films to a biocompatible, optically responsive organic semiconductor, and we verify that the antifouling properties are very well preserved. The technology described here is of interest for the next generation of biomedical implants, involving the use of materials with enhanced antibacterial capability, easy processability, high biocompatibility, and prompt availability for coupling with photoimaging and photodetection techniques.

Hybrid interfaces between living cells and nano/microstructured scaffolds have huge application potential in biotechnology, spanning from regenerative medicine and stem cell therapies to localized drug delivery and from biosensing and tissue engineering to neural computing. However, 3D architectures based on semiconducting polymers, endowed with responsivity to visible light, have never been considered. Here, we apply for the first time a push-coating technique to realize high aspect ratio polymeric pillars, based on polythiophene, showing optimal biocompatibility and allowing for the realization of soft, 3D cell cultures of both primary neurons and cell line models. HEK-293 cells cultured on top of polymer pillars display a remarkable change in the cell morphology and a sizable enhancement of the membrane capacitance due to the cell membrane thinning in correspondence to the pillars' top surface, without negatively affecting cell proliferation. Electrophysiology properties and synapse number of primary neurons are also very well preserved. In perspective, high aspect ratio semiconducting polymer pillars may find interesting applications as soft, photoactive elements for cell activity sensing and modulation.

Organic light-emitting transistors (OLETs) show the fascinating combination of electrical switching characteristics and light generation capability. However, to ensure an effective device operation, an efficient injection of charges into the emissive layer is required. The introduction of solution-processed conjugated polyelectrolyte (CPE) films at the emissive layer/electrode interface represents a promising strategy to improve the electron injection process by dipole formation. However, their use in optoelectronic devices also involves some limitations because of the ionic nature of CPEs. In this context, neutral conjugated polar polymers (CPPs) represent a valid alternative to CPEs because the conjugated backbones of CPPs are functionalized with polar nonionic side groups, thus avoiding ion-dependent drawbacks. By introducing a layer of polyfluorene-containing phosphonate groups underneath the metal electrodes, we here demonstrate a substantial improvement of the electron injection properties into the OLET-emissive layer and, accordingly, a more than 2-fold increased light power and a 5 times higher external quantum efficiency of p-type OLETs in comparison with reference devices without any interlayer. The great benefit of using a transparent glass substrate allowed to selectively investigate the morphological and photoluminescent characteristics of both CPE- and CPP-buried interlayers within complete OLETs by means of an optical scanning probe technique. This, together with a thorough optoelectronic characterization of the figures of merit of working light-emitting devices, allowed to disclose the origin of the improved optical performance of CPP-based devices as well as the operation mechanisms of the investigated interlayer in the corresponding OLETs.

Push-coating is a green and extremely low-cost process in which only few microliters of conjugated polymer solutions are used to produce thin films using capillary forces. Here, we adapt this fabrication technique to replicate self-assembled nanoporous structures on green and red light-emitting conjugated polymer thin films. These films display ring-like photoluminescence and are successfully integrated into polymer light-emitting devices as emitting layers. At low applied voltages, the green-emitting devices exhibit electroluminescence (EL) from hexagonally arranged nanopixel arrays resulting from a stronger electric field in the thinner areas inside the pores. By gradually increasing the voltage up to 10 V, the emission extends to the areas around the pores. At voltages higher than 10 V, a nonreversible nanopixel to nanoring-like switching of the EL can be observed. After filling the pores with a second blue-emitting conjugated polymer, voltage-dependent reversible color tuning of the EL is achieved in the nanostructured light-emitting bilayers.

Because of both its easy processability and compatibility with roll-to-roll processes, polymer electronics is considered to be the most promising technology for the future generation of low-cost electronic devices such as light-emitting diodes and solar cells. However, the state-of-the-art deposition technique for polymer electronics (spin-coating) generates a high volume of chlorinated solution wastes during the active layer fabrication. Here, we demonstrate that devices with similar or higher performances can be manufactured using the push-coating technique in which a poly(dimethylsiloxane) (PDMS) layer is simply laid over a very small amount of solution (less than 1μL/covered cm 2 ), which is then left for drying. Using mm thick PDMS provides a means to control the solvent diffusion kinetics (sorption/retention) and removes the necessity for additional applied pressure to generate the desired active layer thickness. Unlike spin-coating, push-coating is a slow drying process that induces a higher degree of crystallinity in the polymer thin film without the necessity for a post-annealing step. The polymer light-emitting diodes and solar cells prepared by push-coating exhibit slightly higher performances with respect to the reference spin-coated devices, whereas at the same time reduce the amounts of active layer materials and chlorinated solvents by 50 and 20 times, respectively. These increased performances can be correlated to the higher polymer crystallinities obtained without applying a post-annealing treatment. As push-coating is a roll-to-roll compatible method, the results presented here open the path to low-cost and eco-friendly fabrication of a wide range of emerging devices based on conjugated polymer materials.

We report broadband and quasi-omnidirectional antireflective (AR) structures inspired to the nipple arrays of moth eyes. These nanocoatings, based on thin elastomeric films, are prepared by simple self-assembly processing of a co-polymer specifically designed to this purpose, and PDMS replica molding. Typically, their surface is covered by a compact distribution of hemispherical nanodomes of about 250 nm in diameter and about 100 nm in height. When these novel nanostructures are applied on a single glass surface, a maximum of 2% transmission enhancement (equivalent to a 50% reduction of the reflected component) towards wavelengths ranging from visible to near IR region is obtained. A considerable AR power is observed also at a wide range of incident angles ranging from normal to 50°. These properties could be attributed to an optimized graded refractive index profile resulting from the randomly distributed and close-packed nanodomes. Moreover, thanks to their elastomeric nature, these crack-free films can be easily applied on glass, as stickers, and periodically replaced, thus offering the possibility of easy dirt removal from an optical device.