Search

The effects of glass bead size in the conical space of flow-through cells on the dissolution profiles were investigated in a USP apparatus 4. Dissolution tests of disintegrating and non-disintegrating tablets in flow-through dissolution systems were performed using semi-high precision glass beads with diameters ranging from 0.5 mm to 1.5 mm. Computational fluid dynamics (CFD) was used to evaluate the effect of shear stress from the dissolution media flow. The use of smaller glass beads in a larger cell resulted in a faster dissolution of the model formulations under certain test conditions. The effect on the dissolution was highly dependent on the size of the beads in the top layer, including those in contact with the tablets. The absence of a bead-size effect on the dissolution of an orodispersible tablet in a small cell can be explained by the floating fragments during the test. CFD analysis showed that smaller bead diameters led to greater shear stress on the tablet, which was correlated with the dissolution rate. Hence, fluid flow through the narrow gaps between the small beads generated strong local flows, causing shear stress. The size of the glass beads used in flow-through cells affects the dissolution rate of tablets by altering the shear stress on the tablets in certain cases (e.g., direct deposition of the formulation on glass beads, large cells, and very low flow rates). Thus, glass bead size must be considered for a robust dissolution test in a flow-through cell system. [ABSTRACT FROM AUTHOR]

In this study, we have formulated chitosan-coated sodium alginate microparticles containing meloxicam (MLX) and aimed to investigate the correlation between in vitro release and in vivo absorbed percentages of meloxicam. The microparticle formulations were prepared by orifice ionic gelation method with two different sodium alginate concentrations, as 1% and 2% ( w/ v), in order to provide different release rates. Additionally, an oral solution containing 15 mg of meloxicam was administered as the reference solution for evaluation of in vitro/ in vivo correlation ( ivivc). Following in vitro characterization, plasma levels of MLX and pharmacokinetic parameters [elimination half-life ( t), maximum plasma concentration ( C), time for C ( t)] after oral administration to New Zealand rabbits were determined. Area under plasma concentration-time curve (AUC) was calculated by using trapezoidal method. A linear regression was investigated between released% ( in vitro) and absorbed% ( in vivo) with a model-independent deconvolution approach. As a result, increase in sodium alginate content lengthened in vitro release time and in vivo t value. In addition, for ivivc, linear regression equations with r values of 0.8563 and 0.9402 were obtained for microparticles containing 1% and 2% ( w/ v) sodium alginate, respectively. Lower prediction error for 2% sodium alginate formulations (7.419 ± 4.068) compared to 1% sodium alginate formulations (9.458 ± 5.106) indicated a more precise ivivc for 2% sodium alginate formulation. [ABSTRACT FROM AUTHOR]

Dissolution testing and solubility determinations in different biorelevant media have gained considerable interest in the pharmaceutical industry from early-stage development of new products to forecasting bioequivalence. Among all biorelevant fluids, the preparation of fed-state simulated gastric fluid (FeSSGF) and handling of samples from dissolution/solubility testing in FeSSGF is considered to be relatively challenging. Challenges include maintaining the stability of FeSSGF medium upon sampling, filtration, and mitigating analytical interference of excipients and milk components. To overcome these challenges, standard and uniform working practices are required that are not only helpful in preparation of stable FeSSGF but also serve as a harmonizing guide for the collection of dissolution/solubility samples and their subsequent processing (i.e., handling and assay). The optimization of sample preparation methodology is crucial to reduce method-related variance by ensuring specificity, robustness, and reproducibility with acceptable recovery of the analytes. The sample preparation methodology includes a combination of techniques including filtration, solvent treatment, and centrifugation to remove the interfering media-related components and excipients from the analyte. The analytes of interest were chromatographically separated from the interfering analytes to quantify the drug concentration using the new high-performance liquid chromatography methods with ultraviolet detection. The methods developed allow rapid sample preparation, acceptable specificity, reproducible recoveries (greater than 95% of label claim), and quantification of study drugs (ibuprofen and ketoconazole). The sample preparation technique and method considerations provided here for ibuprofen and ketoconazole can serve as a starting point for solubility and dissolution testing of other small molecules in FeSSGF. [ABSTRACT FROM AUTHOR]

The aim of this present study was to investigate the ability of different dissolution methods to predict the in vivo performance of efonidipine hydrochloride (EFH). The solid dispersions of EFH were prepared by solvent evaporation method with HPMC-AS as matrix and urea as a pH adjusting agent. The paddle method, the open-loop, and the closed-loop flow-through cell methods were studied. In the study, Weibull's model was the best fit to explain release profiles. The pharmacokinetics behaviors of two kinds of solid dispersions with different release rate were investigated in comparison to the EFH after oral administration in rats. In vivo absorption was calculated by a numerical deconvolution method. In the study, the level A in vivo and in vitro correlation (IVIVC) was utilized. The correlation coefficient was calculated and interpreted by means of linear regression analysis (Origin.Pro.8.5 software). As a result, excellent IVIVC for solid dispersions and crude drug (r2 = 0.9352–0.9916) was obtained for the dissolution rate determined with flow-through cell open-loop system in phosphate buffer solution with 0.1% (w/v) polysorbate 80 at pH 6.5, the flow-rate of 4 mL/min. In addition, the self-assembled flow cell system had good repeatability and accuracy. The dissolution rate of the solid dispersion could be slowed down by the flow-through method, and the difference caused by preparation was significantly distinguished. The study demonstrated that flow-through cell method of the open-loop, compared with paddle method, was suitable for predicting in vivo performance of EFH solid dispersions. [ABSTRACT FROM AUTHOR]