Search

This paper presents in details design and development of a probe for measuring airflow data for an unmanned aerial vehicle (UAV). The research regards the definition of the requirements and dimensions of the device and limits the measurements to selected aerodynamic parameters only. In the design concept the five parameters gauged in the two independent sections of the probe were envisaged. In the first section temperature, stagnation and static pressure and in the second section flow angles — sideslip and angle of attack (AoA) were determined. The development has been divided into three stages. The first stage included a formulation of the guidelines for the construction of the mechanical elements. The specified requirements included the maximum size of the probe and the resultant restriction on the size of the sensors and their electronics hardware circuits. The next stage was focused on sensors selection and electronics hardware development. Additionally, an appropriate microcontroller system for sensors control and data acquisition was developed. The final stage included formulation of a software algorithm and its implementation. Eventually, the probe was installed on a mini UAV for inflight tests which verified the correctness of the design.

This paper presents a conception of an indoor positioning system for an unmanned aerial vehicle (UAV). The measurement of magnetic field is a main source of information required to estimate a position of the platform. It is a parameter which can be measured with affordable sensors and is easy to obtain. In order to use acquired data, a magnetic field map of the specified environment should be previously determined. Thus, a few ideas of using this information were elaborated. First of all, dedicated hardware had to be designed to implement the method. In this process, a multipurpose measurement system was developed. The measurement system consists of three axis digital magnetometers and battery powered microprocessor system with SD memory card and LCD display. The module was installed on the specially designed chassis that enable testing on 3 different heights. The verification tests were performed in designated room, where permanent magnets were used to modify local magnetic field that could work as beacons.