Search

Tidal effects in planetary systems are the main driver in the orbital migration of natural satellites. They result from physical processes occurring deep inside celestial bodies, whose effects are rarely observable from surface imaging. For giant planet systems, the tidal migration rate is determined by poorly understood dissipative processes in the planet, and standard theories suggest an orbital expansion rate inversely proportional to the power 11/2 in distance, implying little migration for outer moons such as Saturn's largest moon, Titan. Here, we use two independent measurements obtained with the Cassini spacecraft to measure Titan's orbital expansion rate. We find Titan migrates away from Saturn at 11.3 $\pm$ 2.0 cm/year, corresponding to a tidal quality factor of Saturn of Q $\simeq$ 100, and a migration timescale of roughly 10 Gyr. This rapid orbital expansion suggests Titan formed significantly closer to Saturn and has migrated outward to its current position. Our results for Titan and five other moons agree with the predictions of a resonance locking tidal theory, sustained by excitation of inertial waves inside the planet. The associated tidal expansion is only weakly sensitive to orbital distance, motivating a revision of the evolutionary history of Saturn's moon system. The resonance locking mechanism could operate in other systems such as stellar binaries and exoplanet systems, and it may allow for tidal dissipation to occur at larger orbital separations than previously believed., Comment: Published in Nature Astronomy, SharedIt link: https://rdcu.be/b4I3Q

Taking a large amount of images, the Cassini Imaging Science Subsystem (ISS) has been routinely used in astrometry. In ISS images, disk-resolved objects often lead to false detection of stars that disturb the camera pointing correction. The aim of this study was to develop an automated processing method to remove the false image stars in disk-resolved objects in ISS images. The method included the following steps: extracting edges, segmenting boundary arcs, fitting circles and excluding false image stars. The proposed method was tested using 200 ISS images. Preliminary experimental results show that it can remove the false image stars in more than 95% of ISS images with disk-resolved objects in a fully automatic manner, i.e. outperforming the traditional circle detection based on Circular Hough Transform (CHT) by 17%. In addition, its speed is more than twice as fast as that of the CHT method. It is also more robust (no manual parameter tuning is needed) when compared with CHT. The proposed method was also applied to a set of ISS images of Rhea to eliminate the mismatch in pointing correction in automatic procedure. Experiment results showed that the precision of final astrometry results can be improve by roughly 2 times than that of automatic procedure without the method. It proved that the proposed method is helpful in the astrometry of ISS images in fully automatic manner., Comment: 13 pages, 11 figures, accepted by Research in Astronomy and Astrophysics (RAA)

In Cassini ISS (Imaging Science Subsystem) images, contour detection is often performed on disk-resolved object to accurately locate their center. Thus, the contour detection is a key problem. Traditional edge detection methods, such as Canny and Roberts, often extract the contour with too much interior details and noise. Although the deep convolutional neural network has been applied successfully in many image tasks, such as classification and object detection, it needs more time and computer resources. In the paper, a contour detection algorithm based on H-ELM (Hierarchical Extreme Learning Machine) and DenseCRF (Dense Conditional Random Field) is proposed for Cassini ISS images. The experimental results show that this algorithm's performance is better than both traditional machine learning methods such as SVM, ELM and even deep convolutional neural network. And the extracted contour is closer to the actual contour. Moreover, it can be trained and tested quickly on the general configuration of PC, so can be applied to contour detection for Cassini ISS images.

In this paper, a systematic synthesis approach is proposed for achieving negative group delay responses using lossy coupling matrix. It is mathematically proved that, for a passive and reciprocal network, loss is the necessary condition to realize a negative group delay. Also, the optimum strategy is to place zeros and poles of the transfer function both on the left complex plane. A closed-form relation between the group delay and magnitude is then derived based on this strategy, and followed by a complete synthesis approach using coupling matrix. Two numerical and one experimental examples are finally given to illustrate the proposed synthesis method.

This paper proposes a low-profile and highly efficient endfire radiating travelling-wave antenna based on spoof surface plasmon polaritons (SSPPs) transmission line. The aperture is approximately $0.32\lambda_0\times0.01\lambda_0$ where $\lambda_0$ is the space wavelength at the operational frequency 8 GHz. This antenna provides an endfire radiation beam within 7.5-8.5 GHz. The maximum gain and total efficiency reaches 9.2 dBi and $96\%$, respectively. In addition to the endfire operation, it also provides a beam scanning functionality within 9-12 GHz. Measurement results are finally given to validate the proposed SSPPs antenna.

This paper proposes two spoof surface plasmon polariton (SSPP) leaky-wave antennas using periodically loaded patches above perfect electric conductor (PEC) and artificial magnetic conductor (AMC) ground planes, respectively. The SSPP leaky-wave antenna is based on a SSPP transmission line, along which circular patches are periodically loaded on both sides to provide an additional momentum for phase matching with the radiated waves in the air. The PEC and AMC ground planes underneath the antenna reflect the radiated waves into the upward space, leading to an enhanced radiation gain. Both PEC- and AMC-grounded antenna prototypes are fabricated and measured in comparison with the one without any ground plane. The experimental results show that the PEC and AMC ground planes increase the radiation gain by approximately 3 dB within the operational frequency range 4.5-6.5 GHz. It also demonstrates that the AMC-grounded leaky-wave antenna, with a thickness of 0.08\lambda at 6 GHz, features more compact profile than the PEC-grounded one (with a thickness of 0.3\lambda at 6 GHz).

This letter proposes a new spoof surface plasmon transmission line (SSP-TL) using capacitor loading techniques. This new SSP-TL features flexible and reconfigurable dispersion control and highly selective filtering performance without resorting to configuration change. Moreover, it requires much smaller line width than the conventional SSP-TLs for achieving a extremely slow wave (or a highly confined field), which is quite useful for a compact system. To illustrate the design principle, several examples are designed within the frequency range of 2-8 GHz. Both numerical and experimental results are given in comparison with the conventional SSP-TL. It is demonstrated that the proposed technique provides a better performance in size reduction and dispersion reconfigurability.

We show that a continuously nonuniform coupled line C-section phaser, as the limiting case of the step discontinuous coupled-line multisection commensurate and non-commensurate phasers, provides enhanced bandwidth and diversity in real-time analog signal processing (R-ASP). The phenomenology of the component is explained in comparison with the step-discontinuous using multiple-reflection theory and a simple synthesis procedure is provided. The bandwidth enhancement results from the suppression of spurious group delay harmonics or quasi-harmonics, while the diversity enhancement results from the greater level of freedom provided by the continuous nature of the nonuniform profile of the phaser. These statements are supported by theoretical and experimental results.

This paper presents a single-step tunable group delay phaser for spectrum sniffing. This device may be seen as a "time filter", where frequencies are suppressed by time separation rather than by spectral attenuation. Compared to its multiple-step counterpart, this phaser features higher processing resolution, greater simplicity, lower loss and better channel equalization, due to the smaller and channel-independent group delay swing. A three-channel example is provided for illustration.

A compact reflection-type phaser composed of quarter-wavelength transmission line resonators interconnected by alternating K- and J-inverters is proposed. A design method is also presented. To validate this method, a 4th-order example is designed and fabricated. The proposed phaser is shown to exhibit the benefits of smaller size, easier fabrication and suppressed even-order harmonics compared with previously reported half-wavelength phasers.

A coupling matrix technique is presented for the synthesis of nonreciprocal lossless two-port networks. This technique introduces complex inverters to build the nonreciprocal transversal network corresponding to the nonreciprocal coupling matrix. It subsequently transforms this matrix into canonical topologies through complex similarity transformations. The complex inverters in the final topology are transformed into real inverters and gyrators for implementation simplicity. A second-order example is then given to illustrate the proposed technique. Possible implementations of the gyrators involved in the final design are also discussed., Comment: 9 pages, 16 figures

A planar reflective phaser based on an open-ended edge-coupled-line structure is proposed. This phaser is the first reported phaser that combines the benefits of high resolution, inherent to cross-coupled resonator reflective phasers, and of compactness, inherent to planar circuits. A 4-ns swing 4.9-5.5 GHz quadratic phase (linear group delay) 4th-order microstrip phaser is synthesized and experimentally demonstrated. Given its advantages, this phaser may find vast applications in Radio Analog Signal Processing (R-ASP) systems., Comment: 2 pages, 4 figures

The concept of SNR enhancement in impulse radio transceivers based on phasers of opposite chirping slopes is introduced. It is shown that signal to-noise radio (SNR) enhancements by factors M2 and M are achieved for burst noise and Gaussian noise, respectively, where M is the stretching factor of the phasers. An experimental demonstration is presented, using stripline cascaded C-section phasers, where SNR enhancements in agreement with theory are obtained. The proposed radio analog signal processing transceiver system is simple, low-cost and frequency scalable, and may therefore be suitable for broadband impulse radio ranging and communication applications.

Generalized coupled-line all-pass phasers, based on transversally-cascaded (TC), longitudinally-cascaded (LC) and hybrid-cascaded (HC) coupled transmission line sections, are presented and demonstrated using analytical, full-wave and experimental results. It is shown that for N commensurate coupled-line sections, LC and TC phasers exhibit N group delay peaks per coupled-line section harmonic frequency band, in contrast to the TC configuration, which exhibits only one peak within this band. It is also shown that for a given maximum achievable coupling-coefficient, the HC configuration provides the largest group delay swing. A wave-interference analysis is finally applied to the various coupled-line phasers, explaining their unique group delay characteristics based on physical wave-propagation mechanisms., Comment: 10 pages, 11 figures

Analog signal processing (ASP) is presented as a systematic approach to address future challenges in high speed and high frequency microwave applications. The general concept of ASP is explained with the help of examples emphasizing basic ASP effects, such as time spreading and compression, chirping and frequency discrimination. Phasers, which represent the core of ASP systems, are explained to be elements exhibiting a frequency-dependent group delay response, and hence a nonlinear phase response versus frequency, and various phaser technologies are discussed and compared. Real-time Fourier transformation (RTFT) is derived as one of the most fundamental ASP operations. Upon this basis, the specifications of a phaser resolution, absolute bandwidth and magnitude balance are established, and techniques are proposed to enhance phasers for higher ASP performance. Novel closed-form synthesis techniques, applicable to all-pass transmission-type cascaded Csection phasers, all-pass reflection-type coupled resonator phasers and band-pass cross-coupled resonator phasers are described. Several applications using these phasers are presented, including a tunable pulse delay system, a spectrum sniffer and a realtime spectrum analyzer (RTSA). Finally, future challenges and opportunities are discussed.

The concept of space mapping is applied, for the first time, to the design of microwave dispersive delay structures (DDSs). DDSs are components providing specified group delay versus frequency responses for real-time radio systems. The DDSs considered in this paper are formed by cascaded coupled C-sections. It is first shown that aggressive space mapping does not provide sufficient accuracy in the synthesis of DDSs. To address this issue, we propose a predistortion space mapping technique. Compared to aggressive space mapping, this technique provides enhanced accuracy, while compared to output space mapping, it provides greater implementation simplicity. Two full-wave and one experimental examples are provided to illustrate the proposed predistortion space mapping technique.