Search

2D electron density profiles obtained from coherence imaging spectroscopy in different MAST-U divertor conditions are compared. The data includes variations of strike point position, core electron density, and heating power. The improved performance of the long-legged divertors results in a lower electron density and particle flux at the target compared to configurations with smaller strike point major radius, while also being characterized by lower temperatures and deeper detachment. Comparisons against SOLPS simulations generally show good agreement in profile shape along and across the separatrix. The peaking of the electron density downstream of the detachment front is associated with significant neutral drag acting on the plasma flow.

Nuclear fusion could offer clean, abundant energy. However, managing the immense power exhausted from the core fusion plasma towards the divertor remains a major challenge. This is compounded in emerging compact reactor designs which promise more cost-effective pathways towards commercial fusion energy. Alternative divertor configurations (ADCs) are a potential solution to this challenge. In this work, we demonstrate exhaust control in ADCs for the first time, on MAST-U. We employ a novel diagnostic strategy for the neutral gas buffer which shields the target. Our work shows that ADCs tackle key risks and uncertainties in realising fusion energy: 1) an enlarged operating window which 2) improves exhaust control through the absorption of transients which can remove the neutral shield and damage the divertor, 3) isolation of each divertor from other reactor regions, enabling combined control. This showcases real-world benefits of alternative divertors for effective heat load management and control in reactors.

2D profiles of electron density and neutral temperature are inferred from multi-delay Coherence Imaging Spectroscopy data of divertor plasmas using a non-linear inversion technique. The inference is based on imaging the spectral line-broadening of Balmer lines and can differentiate between the Doppler and Stark broadening components by measuring the fringe contrast at multiple interferometric delays simultaneously. The model has been applied to images generated from simulated density profiles to evaluate its performance. Typical mean absolute errors of 30 percent are achieved, which are consistent with Monte Carlo uncertainty propagation accounting for noise, uncertainties in the calibrations, and in the model inputs. The analysis has been tested on experimental data from the MAST-U Super-X divertor, where it infers typical electron densities of 2-3 $10^{19}$ m$^{-3}$ and neutral temperatures of 0-2 eV during beam-heated L-mode discharges. The results are shown to be in reasonable agreement with the other available diagnostics.

Runaway electrons (REs) are a concern for tokamak fusion reactors from discharge startup to termination. A sudden localized loss of a multi-megaampere RE beam can inflict severe damage to the first wall. Should a disruption occur, the existence of a RE seed may play a significant role in the formation of a RE beam and the magnitude of its current. The application of central electron cyclotron resonance heating (ECRH) in the Tokamak \`a Configuration Variable (TCV) reduces an existing RE seed population by up to three orders of magnitude within only a few hundred milliseconds. Applying ECRH before a disruption can also prevent the formation of a post-disruption RE beam in TCV where it would otherwise be expected. The RE expulsion rate and consequent RE current reduction are found to increase with applied ECRH power. Whereas central ECRH is effective in expelling REs, off-axis ECRH has a comparatively limited effect. A simple 0-D model for the evolution of the RE population is presented that explains the effective ECRH-induced RE expulsion results from the combined effects of increased electron temperature and enhanced RE transport.

Exhausting power from the hot fusion core to the plasma-facing components is one of the biggest challenges in fusion energy. The MAST Upgrade tokamak uniquely integrates strong containment of neutrals within the exhaust area (divertor) with extreme divertor shaping capability. By systematically altering the divertor shape, this study shows the strongest evidence to date that long-legged divertors with a high magnetic field gradient (total flux expansion) deliver key power exhaust benefits without adversely impacting the hot fusion core. These benefits are already achieved with relatively modest geometry adjustments that are more feasible to integrate in reactor designs. Benefits include reduced target heat loads and improved access to, and stability of, a neutral gas buffer that 'shields' the target and enhances power exhaust (detachment). Analysis and model comparisons shows these benefits are obtained by combining multiple shaping aspects: long-legged divertors have expanded plasma-neutral interaction volume that drive reductions in particle and power loads, while total flux expansion enhances detachment access and stability. Containing the neutrals in the exhaust area with physical structures further augments these shaping benefits. These results demonstrate strategic variation in the divertor geometry and magnetic topology is a potential solution to one of fusion's biggest challenges: power exhaust.

This experimental study presents an in-depth investigation of the performance of the MAST-U Super-X divertor during NBI-heated operation (up to 2.5 MW) focussing on volumetric ion sources and sinks as well as power losses during detachment. The particle balance and power loss analysis revealed the crucial role of Molecular Activated Recombination and Dissociation (MAR and MAD) ion sinks in divertor particle and power balance, which remain pronounced in the change from ohmic to higher power (NBI heated) L-mode conditions. The importance of MAR and MAD remains with double the absorbed NBI heating. MAD results in significant power dissipation (up to $\sim 20 \%$ of $P_{SOL}$), mostly in the cold ($T_e < 5$ eV) detached region. Theoretical and experimental evidence is found for the potential contribution of $D^-$ to MAR and MAD, which warrants further study. These results suggest that MAR and MAD can be relevant in higher power conditions than the ohmic conditions studied previously. Post-processing reactor-scale simulations shows that MAR and MAD can play a significant role in divertor physics and synthetic diagnostic signals of reactor-scale devices, which are currently underestimated in exhaust simulations. This raises implications for the accuracy of reactor-scale divertor simulations of particularly tightly baffled (alternative) divertor configurations.

High resolution Fulcher band spectroscopy was used in the MAST-U divertors during Super-X and elongated conventional divertor density ramps with $\text{D}_{2}$ fuelling from the mid-plane high-field side. In the Super-X case (density ramp from Greenwald fraction 0.12 to 0.24), the upper divertor showed ground state rotational temperatures of the $\text{D}_{2}$ molecules increasing from $\sim$6000 K, starting at the detachment onset, to $\sim$9000 K during deepening detachment. This was correlated with the movement of the Fulcher emission region, which is correlated with the ionisation source. The increase in rotational temperature did not occur near the divertor entrance, where the plasma was still ionising. Qualitative agreement was obtained between the lower and upper divertor. Similar rotational temperatures were obtained in the elongated divertor before the detachment onset, although the increase in rotational temperature during detachment was less clearly observed as less deep detachment was obtained. %In the elongated conventional divertor there was some qualitative agreement of this effect impeded by low signal. The measured vibrational distribution of the upper Fulcher state (first four bands) does not agree with a ground state Boltzmann distribution but shows a different characteristic with an elevated population especially in the $\nu = 2$ and $\nu = 3$ bands. The populations of the $\nu = 2$ and $\nu = 3$ band relative to the $\nu = 0$ band are roughly proportional to the $\textit{rotational}$ temperature.

Synchrotron radiation observed in a quiescent TCV runaway discharge is studied using filtered camera images targeting three distinct wavelength intervals. Through the tomographic SART procedure the high momentum, high pitch angle part of the spatial and momentum distribution of these relativistic particles is reconstructed. Experimental estimates of the distribution are important for verification and refinement of formation-, decay- and transport-models underlying runaway avoidance and mitigation strategy design. Using a test distribution it is demonstrated that the inversion procedure provides estimates accurate to within a few tens of percent in the region of phase-space contributing most to the synchrotron image. We find that combining images filtered around different parts of the emission spectrum widens the probed part of momentum-space and reduces reconstruction errors. Next, the SART algorithm is used to obtain information on the spatiotemporal runaway momentum distribution in a selected TCV discharge. The momentum distribution is found to relax towards an avalanche-like exponentially decaying profile. Anomalously high pitch angles and a radial profile increasing towards the edge are found for the most strongly emitting particles in the distribution. Pitch angle scattering by toroidal magnetic field ripple is consistent with this picture. An alternative explanation is the presence of high frequency instabilities in combination with the formation of a runaway shell at the edge of the plasma., Comment: 18 pages, 13 figures, submitted to Nuclear Fusion