Search

Leveraging advancements in micro-scale technology, we propose a fleet of autonomous, low-cost, small solar sails for interplanetary exploration. The Berkeley Low-cost Interplanetary Solar Sail (BLISS) project aims to utilize small-scale technologies to create a fleet of tiny interplanetary femto-spacecraft for rapid, low-cost exploration of the inner solar system. This paper describes the hardware required to build a nearly 10 g spacecraft using a 1 m$^2$ solar sail steered by micro-electromechanical systems (MEMS) inchworm actuators. The trajectory control to a NEO, here 101955 Bennu, is detailed along with the low-level actuation control of the solar sail and the specifications of proposed onboard communication and computation. Two other applications are also shortly considered: sample return from dozens of Jupiter-family comets and interstellar comet rendezvous and imaging. The paper concludes by discussing the fundamental scaling limits and future directions for steerable autonomous miniature solar sails with onboard custom computers and sensors., Comment: 16 pages, 13 figures, 5 tables, 23 equations, and just over 10 years

NASA's Stardust mission utilized a sample collector composed of aerogel and aluminum foil to return cometary and interstellar particles to Earth. Analysis of the aluminum foil begins with locating craters produced by hypervelocity impacts of cometary and interstellar dust. Interstellar dust craters are typically less than one micrometer in size and are sparsely distributed, making them difficult to find. In this paper, we describe a convolutional neural network based on the VGG16 architecture that achieves high specificity and sensitivity in locating impact craters in the Stardust interstellar collector foils. We evaluate its implications for current and future analyses of Stardust samples.

We assess whether chondrules, once-molten mm-sized spheres filling the oldest meteorites, could have formed from super-km/s collisions between planetesimals in the solar nebula. High-velocity collisions release hot and dense clouds of silicate vapor which entrain and heat chondrule precursors. Thermal histories of CB chondrules are reproduced for colliding bodies $\sim$10--100 km in radius. The slower cooling rates of non-CB, porphyritic chondrules point to colliders with radii $\gtrsim$ 500 km. How chondrules, collisionally dispersed into the nebula, agglomerated into meteorite parent bodies remains a mystery. The same orbital eccentricities and inclinations that enable energetic collisions prevent planetesimals from re-accreting chondrules efficiently and without damage; thus the sedimentary laminations of the CB/CH chondrite Isheyevo are hard to explain by direct fallback of collisional ejecta. At the same time, planetesimal surfaces may be littered with the shattered remains of chondrules. The micron-sized igneous particles recovered from comet 81P/Wild-2 may have originated from in-situ collisions and subsequent accretion in the proto-Kuiper belt, obviating the need to transport igneous solids across the nebula. Asteroid sample returns from Hayabusa2 and OSIRIS-REx may similarly contain chondrule fragments., Comment: Final MNRAS accepted and proofed version. Minor updates to Sections 2.3 and 3.2 discussing the treatment of the nebular headwind in previous work, plus additional references

Comets likely formed in the outer regions of the protosolar nebula where they incorporated and preserved primitive presolar materials, volatiles resident in the outer disk, and more refractory materials from throughout the disk. The return of a sample of volatiles (i.e., ices and entrained gases), along with other components of a cometary nucleus, will yield numerous major scientific opportunities. We are unaccustomed to thinking of ices through a mineralogical/petrological lens, but at cryogenic temperatures, ices can be regarded as mineral components of rocky material like any other. This is truly Terra Incognita, as a sample from a natural cryogenic (10s of K) environment is unprecedented in any setting; currently, we can only make educated guesses about the nature of these materials on a microscopic scale. Such samples will provide an unparalleled look at the primordial gases and ices present in the early solar nebula, enabling insights into the gas phase and gas-grain chemistry of the nebula. Understanding the nature of the ices in their microscopic, petrographic relationship to the refractory components of the cometary sample will allow for the study of those relationships and interactions and a study of evolutionary processes on small icy bodies. The previous 2013-2022 Planetary Decadal Survey included a study of a Flagship-class cryogenic comet nucleus sample return mission, given the scientific importance of such a mission. However, the mission was not recommended for flight in the last Decadal Survey, in part because of the immaturity of critical technologies. Now, a decade later, the scientific importance of the mission remains and relevant technological advances have been made in both cryo instrumentation for flight and laboratory applications. Such a mission should be undertaken in the next decade., Comment: 8 pages, 2 figures, submitted as a white paper to the NAS Planetary Decadal Survey

We advocate for the realization of volatile sample return from various destinations including: small bodies, the Moon, Mars, ocean worlds/satellites, and plumes. As part of recent mission studies (e.g., Comet Astrobiology Exploration SAmple Return (CAESAR) and Mars Sample Return), new concepts, technologies, and protocols have been considered for specific environments and cost. Here we provide a plan for volatile sample collection and identify the associated challenges with the environment, transit/storage, Earth re-entry, and curation. Laboratory and theoretical simulations are proposed to verify sample integrity during each mission phase. Sample collection mechanisms are evaluated for a given environment with consideration for alteration. Transport and curation are essential for sample return to maximize the science investment and ensure pristine samples for analysis upon return and after years of preservation. All aspects of a volatile sample return mission are driven by the science motivation: isotope fractionation, noble gases, organics and prebiotic species; plus planetary protection considerations for collection and for the sample. The science value of sample return missions has been clearly demonstrated by previous sample return programs and missions. Sample return of volatile material is key to understanding (exo)planet formation, evolution, and habitability. Returning planetary volatiles poses unique and potentially severe technical challenges. These include preventing changes to samples between (and including) collection and analyses, and meeting planetary protection requirements., Comment: White paper submitted to the Planetary Science and Astrobiology Decadal Survey 2023-2032

In a consortium analysis of a large particle captured from the coma of comet 81P/Wild 2 by the Stardust spacecraft, we report the discovery of a field of fine-grained material (FGM) in contact with a large sulfide particle. The FGM was partially located in an embayment in the sulfide, so appears to have been largely protected from damage during hypervelocity capture in aerogel. Some of the FGM particles are indistinguishable in their characteristics from common components of chondritic-porous interplanetary dust particles (CP-IDPs), including glass with embedded metals and sulfides (GEMS) and equilibrated aggregates (EAs). The sulfide exhibits surprising Ni-rich lamellae, which may indicate that this particle experienced a long-duration heating event after its formation but before incorporation into Wild 2. We discuss the relationship of the FGM to the sulfide, to other Wild 2 particles and to the history of the Solar nebula.

The oxidation state of iron in the interstellar medium (ISM) can provide constraints on the processes that operated on material in the protosolar disk. We used synchrotron-based X-ray absorption spectra of several mineral standards and two kinds of primitive extraterrestrial materials to constrain the oxidation state and mineralogy of the host-phase of ISM Fe as measured by X-ray observations of Fe-L ISM absorption from the {\em Chandra X-ray Observatory}. Given the initial oxidation state of the building blocks of the Solar System, we explore nebular and parent-body processes that eventually led to the remarkable diversity of oxidation states of primitive Solar System materials. Oxidation of cometary material appears to have taken place in the nebula, before incorporation into cometary nuclei, although the mechanism is unknown., Comment: 9 pages, 4 figures, submitted to ApJ

Individual particles from comet 81P/Wild 2 collected by NASA's Stardust mission vary in size from small sub-$\mu$m fragments found in the walls of the aerogel tracks, to large fragments up to tens of $\mu$m in size found towards the termini of tracks. The comet, in an orbit beyond Neptune since its formation, retains an intact a record of early-Solar-System processes that was compromised in asteroidal samples by heating and aqueous alteration. We measured the O isotopic composition of seven Stardust fragments larger than $\sim$2 $\mu$m extracted from five different Stardust aerogel tracks, and 63 particles smaller than $\sim$2 $\mu$m from the wall of a Stardust track. The larger particles show a relatively narrow range of O isotopic compositions that is consistent with $^{16}$O-poor phases commonly seen in meteorites. Many of the larger Stardust fragments studied so far have chondrule-like mineralogy which is consistent with formation in the inner Solar System. The fine-grained material shows a very broad range of O isotopic compositions ($-70<\Delta^{17}$O$<+60$) suggesting that Wild 2 fines are either primitive outer-nebula dust or a very diverse sampling of inner Solar System compositional reservoirs that accreted along with a large number of inner-Solar-System rocks to form comet Wild 2.

Near-field infrared spectroscopy by elastic scattering of light from a probe tip resolves optical contrasts in materials at dramatically sub-wavelength scales across a broad energy range, with the demonstrated capacity for chemical identification at the nanoscale. However, current models of probe-sample near-field interactions still cannot provide a sufficiently quantitatively interpretation of measured near-field contrasts, especially in the case of materials supporting strong surface phonons. We present a model of near-field spectroscopy derived from basic principles and verified by finite-element simulations, demonstrating superb predictive agreement both with tunable quantum cascade laser near-field spectroscopy of SiO$_2$ thin films and with newly presented nanoscale Fourier transform infrared (nanoFTIR) spectroscopy of crystalline SiC. We discuss the role of probe geometry, field retardation, and surface mode dispersion in shaping the measured near-field response. This treatment enables a route to quantitatively determine nano-resolved optical constants, as we demonstrate by inverting newly presented nanoFTIR spectra of an SiO$_2$ thin film into the frequency dependent dielectric function of its mid-infrared optical phonon. Our formalism further enables tip-enhanced spectroscopy as a potent diagnostic tool for quantitative nano-scale spectroscopy., Comment: 19 pages, 9 figures

In January 2006, the Stardust mission will return the first samples from a solid solar-system body since Apollo, and the first samples of contemporary interstellar dust ever collected. Although sophisticated laboratory instruments exist for the analysis of Stardust samples, techniques for the recovery of particles and particle residues from aerogel collectors remain primitive. Here we describe our recent progress in developing techniques for extracting small volumes of aerogel, which we have called ``keystones,'' which completely contain particle impacts but minimize the damage to the surrounding aerogel collector. These keystones can be fixed to custom-designed micromachined silicon fixtures (so-called ``microforklifts''). In this configuration the samples are self-supporting, which can be advantageous in situations in which interference from a supporting substrate is undesirable. The keystones may also be extracted and placed onto a substrate without a fixture. We have also demonstrated the capability of homologously crushing these unmounted keystones for analysis techniques which demand flat samples., Comment: 17 pages, 11 figures, submitted to Meteoritics and Planetary Science

Contemporary interstellar dust has never been analyzed in the laboratory, despite its obvious astronomical importance and its potential as a probe of stellar nucleosynthesis and galactic chemical evolution. Here we report the discovery of a novel fluorescent aerogel which is capable of capturing hypervelocity dust grains and passively recording their kinetic energies. An array of these "calorimetric" aerogel collectors in low earth orbit would lead to the capture and identification of large numbers of interstellar dust grains., Comment: 13 pages, 4 figures, to appear in The Astrophysical Journal

Mica can store (for >1 Gy) etchable tracks caused by atoms recoiling from WIMPs. Ancient mica is a directional detector despite the complex motions it makes with respect to the WIMP "wind". We can exploit the properties of directionality and long integration time to probe for structure in the dark matter halo of our galaxy. We compute a sample of possible signals in mica for a plausible model of halo structure., Comment: 7 pages, 2 figures

Mica can store (for >1 Gy) etchable tracks caused by atoms recoiling from WIMPs. Because a background from fission neutrons will eventually limit this technique, a unique signature for WIMPs in ancient mica is needed. Our motion around the center of the Galaxy causes WIMPs, unlike neutrons, to enter the mica from a preferred direction on the sky. Mica is a directional detector and despite the complex rotations that natural mica crystals make with respect to this WIMP ``wind,'' there is a substantial dependence of etch pit density on present day mica orientation., Comment: 5 pages, LaTeX, 2 figures. Accepted for publication at Phys. Rev. Lett