Search

6-DoF grasp detection is critically important for the advancement of intelligent embodied systems, as it provides feasible robot poses for object grasping. Various methods have been proposed to detect 6-DoF grasps through the extraction of 3D geometric features from RGBD or point cloud data. However, most of these approaches encounter challenges during real robot deployment due to their significant computational demands, which can be particularly problematic for mobile robot platforms, especially those reliant on edge computing devices. This paper presents an Efficient End-to-End Grasp Detection Network (E3GNet) for 6-DoF grasp detection utilizing hierarchical heatmap representations. E3GNet effectively identifies high-quality and diverse grasps in cluttered real-world environments. Benefiting from our end-to-end methodology and efficient network design, our approach surpasses previous methods in model inference efficiency and achieves real-time 6-Dof grasp detection on edge devices. Furthermore, real-world experiments validate the effectiveness of our method, achieving a satisfactory 94% object grasping success rate.

Transparent and reflective objects, which are common in our everyday lives, present a significant challenge to 3D imaging techniques due to their unique visual and optical properties. Faced with these types of objects, RGB-D cameras fail to capture the real depth value with their accurate spatial information. To address this issue, we propose DITR, a diffusion-based Depth Inpainting framework specifically designed for Transparent and Reflective objects. This network consists of two stages, including a Region Proposal stage and a Depth Inpainting stage. DITR dynamically analyzes the optical and geometric depth loss and inpaints them automatically. Furthermore, comprehensive experimental results demonstrate that DITR is highly effective in depth inpainting tasks of transparent and reflective objects with robust adaptability.

Dynamic grasping of moving objects in complex, continuous motion scenarios remains challenging. Reinforcement Learning (RL) has been applied in various robotic manipulation tasks, benefiting from its closed-loop property. However, existing RL-based methods do not fully explore the potential for enhancing visual representations. In this letter, we propose a novel framework called Grasps As Points for RL (GAP-RL) to effectively and reliably grasp moving objects. By implementing a fast region-based grasp detector, we build a Grasp Encoder by transforming 6D grasp poses into Gaussian points and extracting grasp features as a higher-level abstraction than the original object point features. Additionally, we develop a Graspable Region Explorer for real-world deployment, which searches for consistent graspable regions, enabling smoother grasp generation and stable policy execution. To assess the performance fairly, we construct a simulated dynamic grasping benchmark involving objects with various complex motions. Experiment results demonstrate that our method effectively generalizes to novel objects and unseen dynamic motions compared to other baselines. Real-world experiments further validate the framework's sim-to-real transferability., Comment: Accepted by RA-L for further publication, may be unavailable or updated in the future

In the context of human-robot interaction and collaboration scenarios, robotic grasping still encounters numerous challenges. Traditional grasp detection methods generally analyze the entire scene to predict grasps, leading to redundancy and inefficiency. In this work, we reconsider 6-DoF grasp detection from a target-referenced perspective and propose a Target-Oriented Grasp Network (TOGNet). TOGNet specifically targets local, object-agnostic region patches to predict grasps more efficiently. It integrates seamlessly with multimodal human guidance, including language instructions, pointing gestures, and interactive clicks. Thus our system comprises two primary functional modules: a guidance module that identifies the target object in 3D space and TOGNet, which detects region-focal 6-DoF grasps around the target, facilitating subsequent motion planning. Through 50 target-grasping simulation experiments in cluttered scenes, our system achieves a success rate improvement of about 13.7%. In real-world experiments, we demonstrate that our method excels in various target-oriented grasping scenarios., Comment: Accepted by ECCV 2024 Workshop on Assistive Computer Vision and Robotics (ACVR 2024)

A series of region-based methods succeed in extracting regional features and enhancing grasp detection quality. However, faced with a cluttered scene with potential collision, the definition of the grasp-relevant region stays inconsistent, and the relationship between grasps and regional spaces remains incompletely investigated. In this paper, we propose Normalized Grasp Space (NGS) from a novel region-aware viewpoint, unifying the grasp representation within a normalized regional space and benefiting the generalizability of methods. Leveraging the NGS, we find that CNNs are underestimated for 3D feature extraction and 6-DoF grasp detection in clutter scenes and build a highly efficient Region-aware Normalized Grasp Network (RNGNet). Experiments on the public benchmark show that our method achieves significant >20% performance gains while attaining a real-time inference speed of approximately 50 FPS. Real-world cluttered scene clearance experiments underscore the effectiveness of our method. Further, human-to-robot handover and dynamic object grasping experiments demonstrate the potential of our proposed method for closed-loop grasping in dynamic scenarios., Comment: Accepted by CoRL2024, final camera-ready version will be updated soon

Manipulating unseen articulated objects through visual feedback is a critical but challenging task for real robots. Existing learning-based solutions mainly focus on visual affordance learning or other pre-trained visual models to guide manipulation policies, which face challenges for novel instances in real-world scenarios. In this paper, we propose a novel part-guided 3D RL framework, which can learn to manipulate articulated objects without demonstrations. We combine the strengths of 2D segmentation and 3D RL to improve the efficiency of RL policy training. To improve the stability of the policy on real robots, we design a Frame-consistent Uncertainty-aware Sampling (FUS) strategy to get a condensed and hierarchical 3D representation. In addition, a single versatile RL policy can be trained on multiple articulated object manipulation tasks simultaneously in simulation and shows great generalizability to novel categories and instances. Experimental results demonstrate the effectiveness of our framework in both simulation and real-world settings. Our code is available at https://github.com/THU-VCLab/Part-Guided-3D-RL-for-Sim2Real-Articulated-Object-Manipulation., Comment: 9 pages

Legged navigation is typically examined within open-world, off-road, and challenging environments. In these scenarios, estimating external disturbances requires a complex synthesis of multi-modal information. This underlines a major limitation in existing works that primarily focus on avoiding obstacles. In this work, we propose TOP-Nav, a novel legged navigation framework that integrates a comprehensive path planner with Terrain awareness, Obstacle avoidance and close-loop Proprioception. TOP-Nav underscores the synergies between vision and proprioception in both path and motion planning. Within the path planner, we present and integrate a terrain estimator that enables the robot to select waypoints on terrains with higher traversability while effectively avoiding obstacles. In the motion planning level, we not only implement a locomotion controller to track the navigation commands, but also construct a proprioception advisor to provide motion evaluations for the path planner. Based on the close-loop motion feedback, we make online corrections for the vision-based terrain and obstacle estimations. Consequently, TOP-Nav achieves open-world navigation that the robot can handle terrains or disturbances beyond the distribution of prior knowledge and overcomes constraints imposed by visual conditions. Building upon extensive experiments conducted in both simulation and real-world environments, TOP-Nav demonstrates superior performance in open-world navigation compared to existing methods., Comment: Published on CoRL 2024

Fast and robust object grasping in clutter is a crucial component of robotics. Most current works resort to the whole observed point cloud for 6-Dof grasp generation, ignoring the guidance information excavated from global semantics, thus limiting high-quality grasp generation and real-time performance. In this work, we show that the widely used heatmaps are underestimated in the efficiency of 6-Dof grasp generation. Therefore, we propose an effective local grasp generator combined with grasp heatmaps as guidance, which infers in a global-to-local semantic-to-point way. Specifically, Gaussian encoding and the grid-based strategy are applied to predict grasp heatmaps as guidance to aggregate local points into graspable regions and provide global semantic information. Further, a novel non-uniform anchor sampling mechanism is designed to improve grasp accuracy and diversity. Benefiting from the high-efficiency encoding in the image space and focusing on points in local graspable regions, our framework can perform high-quality grasp detection in real-time and achieve state-of-the-art results. In addition, real robot experiments demonstrate the effectiveness of our method with a success rate of 94% and a clutter completion rate of 100%. Our code is available at https://github.com/THU-VCLab/HGGD., Comment: Extensive results on GraspNet-1B dataset

Robotic grasping is a primitive skill for complex tasks and is fundamental to intelligence. For general 6-Dof grasping, most previous methods directly extract scene-level semantic or geometric information, while few of them consider the suitability for various downstream applications, such as target-oriented grasping. Addressing this issue, we rethink 6-Dof grasp detection from a grasp-centric view and propose a versatile grasp framework capable of handling both scene-level and target-oriented grasping. Our framework, FlexLoG, is composed of a Flexible Guidance Module and a Local Grasp Model. Specifically, the Flexible Guidance Module is compatible with both global (e.g., grasp heatmap) and local (e.g., visual grounding) guidance, enabling the generation of high-quality grasps across various tasks. The Local Grasp Model focuses on object-agnostic regional points and predicts grasps locally and intently. Experiment results reveal that our framework achieves over 18% and 23% improvement on unseen splits of the GraspNet-1Billion Dataset. Furthermore, real-world robotic tests in three distinct settings yield a 95% success rate., Comment: 8 pages, 8 figures

The goal of object pose estimation is to visually determine the pose of a specific object in the RGB-D input. Unfortunately, when faced with new categories, both instance-based and category-based methods are unable to deal with unseen objects of unseen categories, which is a challenge for pose estimation. To address this issue, this paper proposes a method to introduce geometric features for pose estimation of point clouds without requiring category information. The method is based only on the patch feature of the point cloud, a geometric feature with rotation invariance. After training without category information, our method achieves as good results as other category-based methods. Our method successfully achieved pose annotation of no category information instances on the CAMERA25 dataset and ModelNet40 dataset.

The widespread emergence of smart devices for ECG has sparked demand for intelligent single-lead ECG-based diagnostic systems. However, it is challenging to develop a single-lead-based ECG interpretation model for multiple diseases diagnosis due to the lack of some key disease information. In this work, we propose inter-lead Multi-View Knowledge Transferring of ECG (MVKT-ECG) to boost single-lead ECG's ability for multi-label disease diagnosis. This training strategy can transfer superior disease knowledge from multiple different views of ECG (e.g. 12-lead ECG) to single-lead-based ECG interpretation model to mine details in single-lead ECG signals that are easily overlooked by neural networks. MVKT-ECG allows this lead variety as a supervision signal within a teacher-student paradigm, where the teacher observes multi-lead ECG educates a student who observes only single-lead ECG. Since the mutual disease information between the single-lead ECG and muli-lead ECG plays a key role in knowledge transferring, we present a new disease-aware Contrastive Lead-information Transferring(CLT) to improve the mutual disease information between the single-lead ECG and muli-lead ECG. Moreover, We modify traditional Knowledge Distillation to multi-label disease Knowledge Distillation (MKD) to make it applicable for multi-label disease diagnosis. The comprehensive experiments verify that MVKT-ECG has an excellent performance in improving the diagnostic effect of single-lead ECG.

Auxiliary diagnosis of cardiac electrophysiological status can be obtained through the analysis of 12-lead electrocardiograms (ECGs). This work proposes a dual-scale lead-separated transformer with lead-orthogonal attention and meta-information (DLTM-ECG) as a novel approach to address this challenge. ECG segments of each lead are interpreted as independent patches, and together with the reduced dimension signal, they form a dual-scale representation. As a method to reduce interference from segments with low correlation, two group attention mechanisms perform both lead-internal and cross-lead attention. Our method allows for the addition of previously discarded meta-information, further improving the utilization of clinical information. Experimental results show that our DLTM-ECG yields significantly better classification scores than other transformer-based models,matching or performing better than state-of-the-art (SOTA) deep learning methods on two benchmark datasets. Our work has the potential for similar multichannel bioelectrical signal processing and physiological multimodal tasks.

Despite the recent progress of network pruning, directly applying it to the Internet of Things (IoT) applications still faces two challenges, i.e. the distribution divergence between end and cloud data and the missing of data label on end devices. One straightforward solution is to combine the unsupervised domain adaptation (UDA) technique and pruning. For example, the model is first pruned on the cloud and then transferred from cloud to end by UDA. However, such a naive combination faces high performance degradation. Hence this work proposes an Adversarial Double Masks based Pruning (ADMP) for such cross-domain compression. In ADMP, we construct a Knowledge Distillation framework not only to produce pseudo labels but also to provide a measurement of domain divergence as the output difference between the full-size teacher and the pruned student. Unlike existing mask-based pruning works, two adversarial masks, i.e. soft and hard masks, are adopted in ADMP. So ADMP can prune the model effectively while still allowing the model to extract strong domain-invariant features and robust classification boundaries. During training, the Alternating Direction Multiplier Method is used to overcome the binary constraint of {0,1}-masks. On Office31 and ImageCLEF-DA datasets, the proposed ADMP can prune 60% channels with only 0.2% and 0.3% average accuracy loss respectively. Compared with the state of art, we can achieve about 1.63x parameters reduction and 4.1% and 5.1% accuracy improvement.

In human-computer interaction, it is important to accurately estimate the hand pose especially fingertips. However, traditional approaches for fingertip localization mainly rely on depth images and thus suffer considerably from the noise and missing values. Instead of depth images, stereo images can also provide 3D information of hands and promote 3D hand pose estimation. There are nevertheless limitations on the dataset size, global viewpoints, hand articulations and hand shapes in the publicly available stereo-based hand pose datasets. To mitigate these limitations and promote further research on hand pose estimation from stereo images, we propose a new large-scale binocular hand pose dataset called THU-Bi-Hand, offering a new perspective for fingertip localization. In the THU-Bi-Hand dataset, there are 447k pairs of stereo images of different hand shapes from 10 subjects with accurate 3D location annotations of the wrist and five fingertips. Captured with minimal restriction on the range of hand motion, the dataset covers large global viewpoint space and hand articulation space. To better present the performance of fingertip localization on THU-Bi-Hand, we propose a novel scheme termed Bi-stream Pose Guided Region Ensemble Network (Bi-Pose-REN). It extracts more representative feature regions around joint points in the feature maps under the guidance of the previously estimated pose. The feature regions are integrated hierarchically according to the topology of hand joints to regress the refined hand pose. Bi-Pose-REN and several existing methods are evaluated on THU-Bi-Hand so that benchmarks are provided for further research. Experimental results show that our new method has achieved the best performance on THU-Bi-Hand., Comment: Cairong Zhang and Xinghao Chen are equally contributed

Fingertip detection plays an important role in human computer interaction. Previous works transform binocular images into depth images. Then depth-based hand pose estimation methods are used to predict 3D positions of fingertips. Different from previous works, we propose a new framework, named Two-Stream Binocular Network (TSBnet) to detect fingertips from binocular images directly. TSBnet first shares convolutional layers for low level features of right and left images. Then it extracts high level features in two-stream convolutional networks separately. Further, we add a new layer: binocular distance measurement layer to improve performance of our model. To verify our scheme, we build a binocular hand image dataset, containing about 117k pairs of images in training set and 10k pairs of images in test set. Our methods achieve an average error of 10.9mm on our test set, outperforming previous work by 5.9mm (relatively 35.1%)., Comment: Published in: Visual Communications and Image Processing (VCIP), 2017 IEEE. Original IEEE publication available on https://ieeexplore.ieee.org/abstract/document/8305146/. Dataset available on https://sites.google.com/view/thuhand17

Accurate 3D hand pose estimation plays an important role in Human Machine Interaction (HMI). In the reality of HMI, joints in fingers stretching out, especially corresponding fingertips, are much more important than other joints. We propose a novel method to refine stretching-out finger joint locations after obtaining rough hand pose estimation. It first detects which fingers are stretching out, then neighbor pixels of certain joint vote for its new location based on random forests. The algorithm is tested on two public datasets: MSRA15 and ICVL. After the refinement stage of stretching-out fingers, errors of predicted HMI finger joint locations are significantly reduced. Mean error of all fingertips reduces around 5mm (relatively more than 20%). Stretching-out fingertip locations are even more precise, which in MSRA15 reduces 10.51mm (relatively 41.4%)., Comment: Original publication available on https://doi.org/10.2352/ISSN.2470-1173.2018.2.VIPC-251

In this paper, we strive to answer two questions: What is the current state of 3D hand pose estimation from depth images? And, what are the next challenges that need to be tackled? Following the successful Hands In the Million Challenge (HIM2017), we investigate the top 10 state-of-the-art methods on three tasks: single frame 3D pose estimation, 3D hand tracking, and hand pose estimation during object interaction. We analyze the performance of different CNN structures with regard to hand shape, joint visibility, view point and articulation distributions. Our findings include: (1) isolated 3D hand pose estimation achieves low mean errors (10 mm) in the view point range of [70, 120] degrees, but it is far from being solved for extreme view points; (2) 3D volumetric representations outperform 2D CNNs, better capturing the spatial structure of the depth data; (3) Discriminative methods still generalize poorly to unseen hand shapes; (4) While joint occlusions pose a challenge for most methods, explicit modeling of structure constraints can significantly narrow the gap between errors on visible and occluded joints.

Hand pose estimation from a single depth image is an essential topic in computer vision and human computer interaction. Despite recent advancements in this area promoted by convolutional neural network, accurate hand pose estimation is still a challenging problem. In this paper we propose a Pose guided structured Region Ensemble Network (Pose-REN) to boost the performance of hand pose estimation. The proposed method extracts regions from the feature maps of convolutional neural network under the guide of an initially estimated pose, generating more optimal and representative features for hand pose estimation. The extracted feature regions are then integrated hierarchically according to the topology of hand joints by employing tree-structured fully connections. A refined estimation of hand pose is directly regressed by the proposed network and the final hand pose is obtained by utilizing an iterative cascaded method. Comprehensive experiments on public hand pose datasets demonstrate that our proposed method outperforms state-of-the-art algorithms., Comment: Accepted by Neurocomputing

Dynamic hand gesture recognition has attracted increasing interests because of its importance for human computer interaction. In this paper, we propose a new motion feature augmented recurrent neural network for skeleton-based dynamic hand gesture recognition. Finger motion features are extracted to describe finger movements and global motion features are utilized to represent the global movement of hand skeleton. These motion features are then fed into a bidirectional recurrent neural network (RNN) along with the skeleton sequence, which can augment the motion features for RNN and improve the classification performance. Experiments demonstrate that our proposed method is effective and outperforms start-of-the-art methods., Comment: Accepted by ICIP 2017

3D hand pose estimation from single depth image is an important and challenging problem for human-computer interaction. Recently deep convolutional networks (ConvNet) with sophisticated design have been employed to address it, but the improvement over traditional random forest based methods is not so apparent. To exploit the good practice and promote the performance for hand pose estimation, we propose a tree-structured Region Ensemble Network (REN) for directly 3D coordinate regression. It first partitions the last convolution outputs of ConvNet into several grid regions. The results from separate fully-connected (FC) regressors on each regions are then integrated by another FC layer to perform the estimation. By exploitation of several training strategies including data augmentation and smooth $L_1$ loss, proposed REN can significantly improve the performance of ConvNet to localize hand joints. The experimental results demonstrate that our approach achieves the best performance among state-of-the-art algorithms on three public hand pose datasets. We also experiment our methods on fingertip detection and human pose datasets and obtain state-of-the-art accuracy., Comment: Extended version of arXiv:1702.02447

Hand pose estimation from monocular depth images is an important and challenging problem for human-computer interaction. Recently deep convolutional networks (ConvNet) with sophisticated design have been employed to address it, but the improvement over traditional methods is not so apparent. To promote the performance of directly 3D coordinate regression, we propose a tree-structured Region Ensemble Network (REN), which partitions the convolution outputs into regions and integrates the results from multiple regressors on each regions. Compared with multi-model ensemble, our model is completely end-to-end training. The experimental results demonstrate that our approach achieves the best performance among state-of-the-arts on two public datasets., Comment: Accepted to ICIP 2017. Project: https://github.com/guohengkai/region-ensemble-network

Accurate detection of fingertips in depth image is critical for human-computer interaction. In this paper, we present a novel two-stream convolutional neural network (CNN) for RGB-D fingertip detection. Firstly edge image is extracted from raw depth image using random forest. Then the edge information is combined with depth information in our CNN structure. We study several fusion approaches and suggest a slow fusion strategy as a promising way of fingertip detection. As shown in our experiments, our real-time algorithm outperforms state-of-the-art fingertip detection methods on the public dataset HandNet with an average 3D error of 9.9mm, and shows comparable accuracy of fingertip estimation on NYU hand dataset., Comment: Accepted by ICIP 2016