Search

The V1298 Tau system (20-30Myr), is a benchmark young multi-planet system that provides the opportunity to perform comparative exoplanetology between planets orbiting the same star right after their formation. We present the first atmospheric comparison between two planets in the same transiting system: V1298 Tau b and V1298 Tau c. We derive constraints on the mass of planet b and c (<20M$_\oplus$ at 3$\sigma$ confidence level and $17_{-6}^{+13} M_{\oplus}$ respectively) and atmospheric metallicity (logZ/Z$_\odot$=-2.04$_{-0.59}^{0.69}$, -0.16$_{-0.94}^{1.15}$ respectively) from atmospheric retrievals. The V1298 Tau planets, are likely to be similar in terms of mass at the current age, implying that both planets are potential sub-Neptune/super-Earth progenitors. However, planet c is expected to lose a higher fraction of its mass compared to planet b given its close proximity to the host star. Alternatively, the observed spectrum of planet c can be explained by atmospheric hazes, which is in contrast to planet b where efficient haze formation can be ruled out. Higher haze formation efficiency in planet c could be due to differences in atmospheric composition, temperature and higher UV flux incident compared to planet b., Comment: Submitted to Astronomy ad Astrophysics

The distribution of small planet radius ($<$4 R$_\oplus$) is an indicator of the underlying processes governing planet formation and evolution. We investigate the correlation between the radius distribution of exoplanets in \textit{Kepler} multiplanet systems and the system-level complexity in orbital period spacing. Utilizing a sample of 234 planetary systems with three or more candidate planets orbiting FGK main-sequence stars, we measure the gap complexity ($C$) to characterize the regularity of planetary spacing and compare it with other measures of period spacing and spacing uniformity. We find that systems with higher gap complexity exhibit a distinct radius distribution compared to systems with lower gap complexity. Specifically, we find that the radius valley, which separates super-Earths and sub-Neptunes, is more pronounced in systems with lower gap complexity ($C$$<$0.165). Planets in high complexity systems ($C$$>$0.35) exhibit a lower frequency of sub-Earths (2.5 times less) and sub-Neptunes (1.3 times less) and a higher frequency of super-Earths (1.4 times more) than planets in low complexity systems. This may suggest that planetary systems with more irregular spacings are more likely to undergo dynamic interactions that influence planet scattering, composition, and atmospheric retention. The gap complexity metric proves to be a valuable tool in linking the orbital configurations of planets to their physical characteristics., Comment: 12 pages, 7 figures, accepted in ApJ Letters

PLATO (PLAnetary Transits and Oscillations of stars) is ESA's M3 mission designed to detect and characterise extrasolar planets and perform asteroseismic monitoring of a large number of stars. PLATO will detect small planets (down to <2 R_(Earth)) around bright stars (<11 mag), including terrestrial planets in the habitable zone of solar-like stars. With the complement of radial velocity observations from the ground, planets will be characterised for their radius, mass, and age with high accuracy (5 %, 10 %, 10 % for an Earth-Sun combination respectively). PLATO will provide us with a large-scale catalogue of well-characterised small planets up to intermediate orbital periods, relevant for a meaningful comparison to planet formation theories and to better understand planet evolution. It will make possible comparative exoplanetology to place our Solar System planets in a broader context. In parallel, PLATO will study (host) stars using asteroseismology, allowing us to determine the stellar properties with high accuracy, substantially enhancing our knowledge of stellar structure and evolution. The payload instrument consists of 26 cameras with 12cm aperture each. For at least four years, the mission will perform high-precision photometric measurements. Here we review the science objectives, present PLATO's target samples and fields, provide an overview of expected core science performance as well as a description of the instrument and the mission profile at the beginning of the serial production of the flight cameras. PLATO is scheduled for a launch date end 2026. This overview therefore provides a summary of the mission to the community in preparation of the upcoming operational phases.

The characterization of Super-Earth-to-Neptune sized exoplanets relies heavily on our understanding of their formation and evolution. In this study, we link a model of planet formation by pebble accretion to the planets' long-term observational properties by calculating the interior evolution, starting from the dissipation of the protoplanetary disk. We investigate the evolution of the interior structure in 5-20 Earth masses planets, accounting for silicate redistribution caused by convective mixing, rainout (condensation and settling), and mass loss. Specifically, we have followed the fate of the hot silicate vapor that remained in the planet's envelope after planet formation, as the planet cools. We find that disk dissipation is followed by a rapid contraction of the envelope within 10 Myr. Subsequent cooling leads to substantial growth of the planetary core through silicate rainout, accompanied by inflated radii, in comparison to the standard models of planets that formed with core-envelope structure. We examine the dependence of rainout on the planet's envelope mass, distance from its host star, its silicate mass, and the atmospheric opacity. We find that the population of planets formed with polluted envelopes can be roughly divided in three groups, based on the mass of their gas envelopes: bare rocky cores that have shed their envelopes, super-Earth planets with a core-envelope structure, and Neptune-like planets with diluted cores that undergo gradual rainout. For polluted planets formed with envelope masses below 0.4 Earth mass, we anticipate that the inflation of the planet's radius caused by rainout will enhance mass loss by a factor of 2-8 compared to planets with non-polluted envelopes. Our model provides an explanation for bridging the gap between the predicted composition gradients in massive planets and the core-envelope structure in smaller planets., Comment: Accepted for publication in A&A

Young transiting exoplanets offer a unique opportunity to characterize the atmospheres of fresh and evolving products of planet formation. We present the transmission spectrum of V1298 Tau b; a 23 Myr old warm Jovian sized planet orbiting a pre-main sequence star. We detect a primordial atmosphere with an exceptionally large atmospheric scale height and a water vapour absorption at 5$\sigma$ level of significance. We estimate a mass and density upper limit (24$\pm$5$M_{\oplus}$, 0.12gm/$cm^{3}$ respectively). V1298 Tau b is one of the lowest density planets discovered till date. We retrieve a low atmospheric metallicity (logZ=$-0.1^{+0.66}_{-0.72}$ solar), consistent with solar/sub-solar values. Our findings challenge the expected mass-metallicity from core-accretion theory. Our observations can be explained by in-situ formation via pebble accretion together with ongoing evolutionary mechanisms. We do not detect methane, which hints towards a hotter than expected interior from just the formation entropy of this planet. Our observations suggest that V1298 Tau b is likely to evolve into a Neptune/sub-Neptune type of planet., Comment: 37 pages, Submitted Nature Astronomy

Fitness applications are commonly used to monitor activities within the gym, but they often fail to automatically track indoor activities inside the gym. This study proposes a model that utilizes pose estimation combined with a novel data augmentation method, i.e., rotation matrix. We aim to enhance the classification accuracy of activity recognition based on pose estimation data. Through our experiments, we experiment with different classification algorithms along with image augmentation approaches. Our findings demonstrate that the SVM with SGD optimization, using data augmentation with the Rotation Matrix, yields the most accurate results, achieving a 96% accuracy rate in classifying five physical activities. Conversely, without implementing the data augmentation techniques, the baseline accuracy remains at a modest 64%., Comment: 24 pages

Sub-Neptune planets formed in the protoplanetary disk accreted hydrogen-helium (H,He) envelopes. Planet formation models of sub-Neptunes formed by pebble accretion result in small rocky cores surrounded by polluted H,He envelopes where most of the rock (silicate) is in vapor form at the end of the formation phase. This vapor is expected to condense and rain-out as the planet cools. In this Letter we examine the timescale for the rainout and its effect on the thermal evolution. We calculate the thermal and structural evolution of a 10 Earth masses planet formed by pebble accretion, taking into account material redistribution from silicate rainout (condensation and settling) and from convective mixing. We find that the duration of the rainout in sub-Neptunes is on Gyr timescale and varies with envelope mass: planets with envelopes below 0.75 Earth mass rainout into a core-envelope structure in less than 1 Gyr, while planets in excess of 0.75 Earth mass of H,He preserve some of their envelope pollution for billions of years. The energy released by the rainout inflates the radius with respect to planets that start out from a plain core-envelope structure. This inflation would result in estimates of the H,He contents of observed exoplanets based on the standard core-envelope structure to be too high.We identify a number of planets in the exoplanet census where rainout may operate, which would result in their H,He contents to be overestimated by up to a factor two. Future accurate age measurements by the PLATO mission may allow the identification of planets formed with polluted envelopes., Comment: accepted to A&A Letters

Observations and statistical studies have shown that giant planets are rare around M dwarfs compared with Sun-like stars. The formation mechanism of these extreme systems remains under debate for decades. With the help of the TESS mission and ground based follow-up observations, we report the discovery of TOI-4201b, the most massive and densest hot Jupiter around an M dwarf known so far with a radius of $1.22\pm 0.04\ R_J$ and a mass of $2.48\pm0.09\ M_J$, about 5 times heavier than most other giant planets around M dwarfs. It also has the highest planet-to-star mass ratio ($q\sim 4\times 10^{-3}$) among such systems. The host star is an early-M dwarf with a mass of $0.61\pm0.02\ M_{\odot}$ and a radius of $0.63\pm0.02\ R_{\odot}$. It has significant super-solar iron abundance ([Fe/H]=$0.52\pm 0.08$ dex). However, interior structure modeling suggests that its planet TOI-4201b is metal-poor, which challenges the classical core-accretion correlation of stellar-planet metallicity, unless the planet is inflated by additional energy sources. Building on the detection of this planet, we compare the stellar metallicity distribution of four planetary groups: hot/warm Jupiters around G/M dwarfs. We find that hot/warm Jupiters show a similar metallicity dependence around G-type stars. For M dwarf host stars, the occurrence of hot Jupiters shows a much stronger correlation with iron abundance, while warm Jupiters display a weaker preference, indicating possible different formation histories., Comment: 24 pages, 14 figures, 4 tables, accepted to AJ

The giant planets were the first to form and hold the key to unveiling the solar system's formation history in their interiors and atmospheres. Furthermore, the unique conditions present in the interiors of the giant planets make them natural laboratories for exploring different elements under extreme conditions. We are at a unique time to study these planets. The missions Juno to Jupiter and Cassini to Saturn have provided invaluable information to reveal their interiors like never before, including extremely accurate gravity data, atmospheric abundances and magnetic field measurements that revolutionised our knowledge of their interior structures. At the same time, new laboratory experiments and modelling efforts also improved, and statistical analysis of these planets is now possible to explore all the different conditions that shape their interiors. We review the interior structure of Jupiter, Saturn, Uranus and Neptune, including the need for inhomogeneous structures to explain the data, the problems unsolved and the effect that advances in our understanding of their internal structure have on their formation and evolution., Comment: Review paper published in the special issue "Remote Sensing Observations of the Giant Planets"

Although carbon monoxide (CO) is an abundant molecule and may have great importance for planetary interiors, measurements of its properties are difficult due to its extreme volatility. We calculate the equation of state for CO over a range of temperature and density that is applicable to the conditions in planetary interiors. Previous experimental and theoretical studies cover only a limited temperature-density range. Our calculations match these early results well, but now cover the full range of relevance. The method of calculation is based on the general-purpose quotidian equation of state described by More et al. (1988), which is here used in order to generate a freely downloadable look-up table to be used by the community., Comment: 12 pages, 5 figures. Accepted for publication in Icarus

This chapter of the Planetary Exploration Horizon 2061 Report reviews the way the six key questions about planetary systems, from their origins to the way they work and their habitability, identified in chapter 1, can be addressed by means of solar system exploration, and how one can find partial answers to these six questions by flying to the different provinces to the solar system: terrestrial planets, giant planets, small bodies, and up to its interface with the local interstellar medium. It derives from this analysis a synthetic description of the most important space observations to be performed at the different solar system objects by future planetary exploration missions. These observation requirements illustrate the diversity of measurement techniques to be used as well as the diversity of destinations where these observations must be made. They constitute the base for the identification of the future planetary missions we need to fly by 2061, which are described in chapter 4. Q1- How well do we understand the diversity of planetary systems objects? Q2- How well do we understand the diversity of planetary system architectures? Q3- What are the origins and formation scenarios for planetary systems? Q4- How do planetary systems work? Q5- Do planetary systems host potential habitats? Q6- Where and how to search for life?, Comment: 107 pages, 37 figures, Horizon 2061 is a science-driven, foresight exercise, for future scientific investigations

This book is intended for beginners who have no familiarity with deep learning. Our only expectation from readers is that they already have the basic programming skills in Python., Comment: 205 pages, in Farsi

Our understanding of planet formation has been rapidly evolving in recent years. The classical planet formation theory, developed when the only known planetary system was our own Solar System, has been revised to account for the observed diversity of the exoplanetary systems. At the same time, the increasing observational capabilities of the young stars and their surrounding disks bring new constraints on the planet formation process. In this chapter, we summarize the new information derived from the exoplanets population and the circumstellar disks observations. We present the new developments in planet formation theory, from dust evolution to the growth of planetary cores by accretion of planetesimals, pebbles, and gas. We review the state-of-the-art models for the formation of diverse planetary systems, including the population synthesis approach which is necessary to compare theoretical model outcomes to the exoplanet population. We emphasize that the planet formation process may not be spatially uniform in the disk and there are preferential locations for the formation of planetesimals and planets. Outside of these locations, a significant fraction of solids is not growing past the pebble-sizes. The reservoir of pebbles plays an important role in the growth of planetary cores in the pebble accretion process. The timescale of the emergence of massive planetary cores is an important aspect of the present models and it is likely that the cores within one disk form at different times. In addition, there is growing evidence that the first planetary cores start forming early, during the circumstellar disk buildup process., Comment: 38 pages, 13 figures, review chapter accepted to Protostars and Planets VII, editors: Shu-ichiro Inutsuka, Yuri Aikawa, Takayuki Muto, Kengo Tomida, and Motohide Tamura, corrected label in Fig. 1

Today, data is a fuel for businesses to gain important insights and improve their performance. There is no industry in the world today that does not use data. But who will get this insight? Who processes all the raw data? Everything is done by a data analyst or a data scientist., Comment: in Persian language

Aspect-based sentiment analysis is of great importance and application because of its ability to identify all aspects discussed in the text. However, aspect-based sentiment analysis will be most effective when, in addition to identifying all the aspects discussed in the text, it can also identify their polarity. Most previous methods use the pipeline approach, that is, they first identify the aspects and then identify the polarities. Such methods are unsuitable for practical applications since they can lead to model errors. Therefore, in this study, we propose a multi-task learning model based on Convolutional Neural Networks (CNNs), which can simultaneously detect aspect category and detect aspect category polarity. creating a model alone may not provide the best predictions and lead to errors such as bias and high variance. To reduce these errors and improve the efficiency of model predictions, combining several models known as ensemble learning may provide better results. Therefore, the main purpose of this article is to create a model based on an ensemble of multi-task deep convolutional neural networks to enhance sentiment analysis in Persian reviews. We evaluated the proposed method using a Persian language dataset in the movie domain. Jacquard index and Hamming loss measures were used to evaluate the performance of the developed models. The results indicate that this new approach increases the efficiency of the sentiment analysis model in the Persian language.

Identification of user's opinions from natural language text has become an exciting field of research due to its growing applications in the real world. The research field is known as sentiment analysis and classification, where aspect category detection (ACD) and aspect category polarity (ACP) are two important sub-tasks of aspect-based sentiment analysis. The goal in ACD is to specify which aspect of the entity comes up in opinion while ACP aims to specify the polarity of each aspect category from the ACD task. The previous works mostly propose separate solutions for these two sub-tasks. This paper focuses on the ACD and ACP sub-tasks to solve both problems simultaneously. The proposed method carries out multi-label classification where four different deep models were employed and comparatively evaluated to examine their performance. A dataset of Persian reviews was collected from CinemaTicket website including 2200 samples from 14 categories. The developed models were evaluated using the collected dataset in terms of example-based and label-based metrics. The results indicate the high applicability and preference of the CNN and GRU models in comparison to LSTM and Bi-LSTM., Comment: 20 pages, 9 figures

The goal of the Ariel space mission is to observe a large and diversified population of transiting planets around a range of host star types to collect information on their atmospheric composition. The planetary bulk and atmospheric compositions bear the marks of the way the planets formed: Ariel's observations will therefore provide an unprecedented wealth of data to advance our understanding of planet formation in our Galaxy. A number of environmental and evolutionary factors, however, can affect the final atmospheric composition. Here we provide a concise overview of which factors and effects of the star and planet formation processes can shape the atmospheric compositions that will be observed by Ariel, and highlight how Ariel's characteristics make this mission optimally suited to address this very complex problem., Comment: 67 pages, 11 figures, 1 table. Postprint of the article to appear as open access in the Ariel Special Issue by the journal Experimental Astronomy

The amount of nebular gas that a planet can bind is limited by its cooling rate, which is set by the opacity of its envelope. Accreting dust and pebbles contribute to the envelope opacity and, thus, influence the outcome of planet formation. Our aim is to model the size evolution and opacity contribution of solids inside planetary envelopes. We then use the resultant opacity relations to study emergent trends in planet formation. We design a model for the opacity of solids in planetary envelopes that accounts for the growth, fragmentation and erosion of pebbles during their sedimentation. We formulate analytical expressions for the opacity of pebbles and dust and map out their trends as a function of depth, planet mass, distance and accretion rate. We find that the accretion of pebbles rather than planetesimals can produce fully convective envelopes, but only in lower-mass planets that reside in the outer disk or in those that are accreting pebbles at a high rate. In these conditions, pebble sizes are limited by fragmentation and erosion, allowing them to pile up in the envelope. At higher planetary masses or reduced accretion rates, a different regime applies where the sizes of sedimenting pebbles are only limited by their rate of growth. The opacity in this growth-limited regime is much lower, steeply declines with depth and planet mass but is invariant with the pebble mass flux. Our results imply that the opacity of a forming planetary envelope can not be approximated by a value that is constant with either depth or planet mass. When applied to the Solar System, we argue that Uranus and Neptune could not have maintained a sufficiently high opacity to avoid runaway gas accretion unless they both experienced sufficiently rapid accretion of solids and formed late., Comment: Accepted to A&A. Comments are welcome

Ariel, the Atmospheric Remote-sensing Infrared Exoplanet Large-survey, was adopted as the fourth medium-class mission in ESA's Cosmic Vision programme to be launched in 2029. During its 4-year mission, Ariel will study what exoplanets are made of, how they formed and how they evolve, by surveying a diverse sample of about 1000 extrasolar planets, simultaneously in visible and infrared wavelengths. It is the first mission dedicated to measuring the chemical composition and thermal structures of hundreds of transiting exoplanets, enabling planetary science far beyond the boundaries of the Solar System. The payload consists of an off-axis Cassegrain telescope (primary mirror 1100 mm x 730 mm ellipse) and two separate instruments (FGS and AIRS) covering simultaneously 0.5-7.8 micron spectral range. The satellite is best placed into an L2 orbit to maximise the thermal stability and the field of regard. The payload module is passively cooled via a series of V-Groove radiators; the detectors for the AIRS are the only items that require active cooling via an active Ne JT cooler. The Ariel payload is developed by a consortium of more than 50 institutes from 16 ESA countries, which include the UK, France, Italy, Belgium, Poland, Spain, Austria, Denmark, Ireland, Portugal, Czech Republic, Hungary, the Netherlands, Sweden, Norway, Estonia, and a NASA contribution., Comment: Ariel Definition Study Report, 147 pages. Reviewed by ESA Science Advisory Structure in November 2020. Original document available at: https://www.cosmos.esa.int/documents/1783156/3267291/Ariel_RedBook_Nov2020.pdf/

The recently adopted Ariel ESA mission will measure the atmospheric composition of a large number of exoplanets. This information will then be used to better constrain planetary bulk compositions. While the connection between the composition of a planetary atmosphere and the bulk interior is still being investigated, the combination of the atmospheric composition with the measured mass and radius of exoplanets will push the field of exoplanet characterisation to the next level, and provide new insights of the nature of planets in our galaxy. In this white paper, we outline the ongoing activities of the interior working group of the {\it Ariel} mission, and list the desirable theoretical developments as well as the challenges in linking planetary atmospheres, bulk composition and interior structure., Comment: Accepted for publication in Experimental Astronomy

Ice-rich planets are formed exterior to the water ice-line and thus are expected to contain a substantial amount of ices. The high ice content leads to unique conditions in the interior, under which the structure of a planet is affected by ice interaction with other metals. We apply experimental data of ice-rock interaction at high pressure, and calculate detailed thermal evolution for possible interior configurations of ice-rich planets, in the mass range of super-Earth to Neptunes (5-15 Earth masses). We model the effect of migration inward on the ice-rich interior by including the influences of stellar flux and envelope mass loss. We find that ice and rock are expected to remain mixed, due to miscibility at high pressure, in substantial parts of the planetary interior for billions of years. We also find that the deep interior of planetary twins that have migrated to different distances from the star are usually similar, if no mass loss occurs. Significant mass loss results in separation of the water from the rock on the surface and emergence of a volatile atmosphere of less than 1 percent of the planet's mass. The mass of the atmosphere of water/steam is limited by the ice-rock interaction. We conclude that when ice is abundant in planetary interiors the planet structure may differ significantly from the standard layered structure of a water shell on top of a rocky core. Similar structure is expected in both close-in and further-out planets., Comment: Accepted for publication in ApJ. Updated with extensive appendices on ice-rock interaction. Results and conclusions are unchanged

During their formation, planets form large, hot atmospheres due to the ongoing accretion of solids. It has been customary to assume that all solids end up at the center constituting a "core" of refractory materials, whereas the envelope remains metal-free. Recent work, as well as observations by the JUNO mission, indicate however that the distinction may not be so clear cut. Indeed, small silicate, pebble-sized particles will sublimate in the atmosphere when they hit the sublimation temperature (T ~ 2,000 K). In this paper we extend previous analytical work to compute the properties of planets under such a pebble accretion scenario. We conduct 1D numerical calculations of the atmosphere of an accreting planet, solving the stellar structure equations, augmented by a non-ideal equation of state that describes a hydrogen/helium-silicate vapor mixture. Calculations terminate at the point where the total mass in metal equals that of the H/He gas, which we numerically confirm as the onset of runaway gas accretion. When pebbles sublimate before reaching the core, insufficient (accretion) energy is available to mix dense, vapor-rich lower layers with the higher layers of lower metallicity. A gradual structure in which Z decreases with radius is therefore a natural outcome of planet formation by pebble accretion. We highlight, furthermore, that (small) pebbles can act as the dominant source of opacity, preventing rapid cooling and presenting a channel for (mini-)Neptunes to survive in gas-rich disks. Nevertheless, once pebble accretion subsides, the atmosphere rapidly clears followed by runaway gas accretion. We consider atmospheric recycling to be the more probable mechanisms that have stalled the growth of these planets' envelopes., Comment: Accepted for publication in A&A

Dark rings with bright rims are the indirect signposts of planets embedded in protoplanetary discs. In a recent first, an azimuthally elongated AU-scale blob, possibly a planet, was resolved with ALMA in TW Hya. The blob is at the edge of a cliff-like rollover in the dust disc rather than inside a dark ring. Here we build time-dependent models of TW Hya disc. We find that the classical paradigm cannot account for the morphology of the disc and the blob. We propose that ALMA-discovered blob hides a Neptune mass planet losing gas and dust. We show that radial drift of mm-sized dust particles naturally explains why the blob is located on the edge of the dust disc. Dust particles leaving the planet perform a characteristic U-turn relative to it, producing an azimuthally elongated blob-like emission feature. This scenario also explains why a 10 Myr old disc is so bright in dust continuum. Two scenarios for the dust-losing planet are presented. In the first, a dusty pre-runaway gas envelope of about 40 Earth mass Core Accretion planet is disrupted, e.g., as a result of a catastrophic encounter. In the second, a massive dusty pre-collapse gas giant planet formed by Gravitational Instability is disrupted by the energy released in its massive core. Future modelling may discriminate between these scenarios and allow us to study planet formation in an entirely new way -- by analysing the flows of dust and gas recently belonging to planets, informing us about the structure of pre-disruption planetary envelopes., Comment: Typos fixed, references and author list updated

The large brightness variation in the observed lightcurve of Oumuamua is probably related to its shape, i.e., to the ratio between its longest axis and its shortest axis (aspect ratio). Several approaches found the aspect ratio of Oumuamua to be unusually elongated. Moreover, the spin axis orientation has to be almost perpendicular to the observer in order to obtain such an extreme lightcurve, a configuration which is unlikely. However, interstellar Oumuamua may have different surface properties than we know in our solar system. Therefore, in this work we widen the parameter space for surface properties beyond the asteroid-like models and study its effect on the lightcurve of Oumuamua. We calculate reflection from a rotating ellipsoidal object for four models: Lambertian reflection, specular reflection, single scattering diffusive and backscatter. We then calculate the probability to obtain a lightcurve ratio larger than the observed, as a function of the object aspect ratio, assuming an isotopic spin orientation distribution. We find the elongation of Oumuamua to be less extreme for the Lambertian and specular reflection models. Consequently, the probability to observe the lightcurve ratio of Oumuamua given its unknown spin axis orientation is larger for those models. We conclude that different surface reflection properties may suggest alternatives to the extreme shape of Oumuamua, relieving the need for complicated formation scenario, extreme albedo variation, or unnatural origin. Although the models suggested here are for ideal ellipsoidal shape and ideal reflection method, the results emphasize the importance of surface properties for the derived aspect ratio., Comment: 7 pages, accepted for publication in MNRAS

Low bone mineral density (BMD) is believed to influence the outcome of instrumented spinal surgery and can lead to reoperation. Purpose of this observational and case-control study was to investigate the association of BMD with the risk of reoperation following instrumented lumbar spinal fusion (LSF). For the observational study, 81 patients were included who received LSF with and without augmentation. For the case-control study, 18 patients who had reoperation following LSF were matched to 26 patients who did not have reoperation (matched by sex, age +/- 5 years, fused levels and PMMA-augmentation). Opportunistic BMD screening was performed in perioperative CT scans using asynchronous calibration. Mean BMD was compared between patients with and without reoperation in augmented and non-augmented surgeries. In the observational study, prevalence of osteoporosis (BMD < 80 mg/cc) was 29% in non-augmented and 85% in augmented LSF. Seven of 48 patients with non-augmented (15%) and 4 of 33 patients with augmented LSF (12%) had reoperation. In non-augmented LSF, patients with reoperation had significantly lower BMD than patients without reoperation (P = 0.005). The best cut-off to predict reoperation after non-augmented LSF was BMD < 83.7 mg/cc. In the case-control study, patients with reoperation presented numerically lower BMD of 78.8 +/- 33.1 mg/cc than patients without reoperation with BMD of 89.4 +/- 39.7 mg/cc (P = 0.357). Despite much lower BMD surgeries with PMMA-augmentation showed no higher reoperation rate compared to non-augmented surgeries. Patients with reoperation following LSF showed slightly lower BMD compared to matched patients without reoperation, but the difference was not statistically significant. Opportunistic BMD screening can be performed in preoperative CT, thus informing about osteoporotic bone, a potential risk factor of surgery failure., Comment: 16 pages, 2 figures, 4 tables

The presence of rocky exoplanets with a large refractory carbon inventory is predicted by chemical evolution models of protoplanetary disks of stars with photospheric C/O >0.65, and by models studying the radial transport of refractory carbon. High-pressure high-temperature laboratory experiments show that most of the carbon in these exoplanets differentiates into a graphite outer shell. Our aim is to evaluate the effects of a graphite outer shell on the thermal evolution of rocky exoplanets containing a metallic core and a silicate mantle. We implement a parameterized model of mantle convection to determine the thermal evolution of rocky exoplanets with graphite layer thicknesses up to 1000 km. We find that, due to the high thermal conductivity of graphite, conduction is the dominant heat transport mechanism in a graphite layer for the long-term evolution (>200 Myr). The conductive graphite shell essentially behaves like a stagnant lid with a fixed thickness. Models of Kepler-37b (Mercury-size) and a Mars-sized exoplanet show that a planet with a graphite lid cools faster than a planet with a silicate lid, and a planet without a stagnant lid cools the fastest. A graphite lid needs to be approximately ten times thicker than a corresponding silicate lid in order to produce similar thermal evolution., Comment: 13 pages, 6 figures

The low luminosity of Uranus is a long-standing challenge in planetary science. Simple adiabatic models are inconsistent with the measured luminosity, which indicates that Uranus is non-adiabatic because it has thermal boundary layers and/or conductive regions. A gradual composition distribution acts as a thermal boundary to suppress convection and slow down the internal cooling. Here we investigate whether composition gradients in the deep interior of Uranus can explain its low luminosity, the required composition gradient, and whether it is stable for convective mixing on a timescale of some billion years. We varied the primordial composition distribution and the initial energy budget of the planet, and chose the models that fit the currently measured properties (radius, luminosity, and moment of inertia) of Uranus. We present several alternative non-adiabatic internal structures that fit the Uranus measurements. We found that convective mixing is limited to the interior of Uranus, and a composition gradient is stable and sufficient to explain its current luminosity. As a result, the interior of Uranus might still be very hot, in spite of its low luminosity. The stable composition gradient also indicates that the current internal structure of Uranus is similar to its primordial structure. Moreover, we suggest that the initial energy content of Uranus cannot be greater than 20% of its formation (accretion) energy. We also find that an interior with a mixture of ice and rock, rather than separated ice and rock shells, is consistent with measurements, suggesting that Uranus might not be "differentiated". Our models can explain the luminosity of Uranus, and they are also consistent with its metal-rich atmosphere and with the predictions for the location where its magnetic field is generated., Comment: 10 pages, 7 figures, accepted for publication in A&A

Direct imaging (DI) surveys suggest that gas giants beyond 20 AU are rare around FGK stars. However, it is not clear what this means for the formation frequency of Gravitational Instability (GI) protoplanets due to uncertainties in gap opening and migration efficiency. Here we combine state-of-the-art calculations of homogeneous planet contraction with a population synthesis code. We find DI constraints to be satisfied if protoplanet formation by GI occurs in tens of percent of systems if protoplanets `super migrate' to small separations. In contrast, GI may occur in only a few percent of systems if protoplanets remain stranded at wide orbits because their migration is `quenched' by efficient gap opening. We then use the frequency of massive giants in radial velocity surveys inside 5 AU to break this degeneracy - observations recently showed that this population does not correlate with the host star metallicity and is therefore suspected to have formed via GI followed by inward migration. We find that only the super-migration scenario can sufficiently explain this population whilst simultaneously satisfying the DI constraints and producing the right mass spectrum of planets inside 5 AU. If massive gas-giants inside 5 AU formed via GI, then our models imply that migration must be efficient and that the formation of GI protoplanets occurs in at least a tens of percent of systems., Comment: Accepted to MNRAS

We present WASP-43b climate simulations with deep wind jets (down to 700~bar) that are linked to retrograde (westward) flow at the equatorial day side for $p<0.1$~bar. Retrograde flow inhibits efficient eastward heat transport and naturally explains the small hotspot shift and large day-night-side gradient of WASP-43b ($P_{\text{orb}}=P_{\text{rot}}=0.8135$~days) observed with Spitzer. We find that deep wind jets are mainly associated with very fast rotations ($P_{\text{rot}}=P_{\text{orb}}\leq 1.5$~days) which correspond to the Rhines length smaller than $2$ planetary radii. We also diagnose wave activity that likely gives rise to deviations from superrotation. Further, we show that we can achieve full steady state in our climate simulations by imposing a deep forcing regime for $p>10$~bar: convergence time scale $\tau_{\text{conv}}=10^6-10^8$~s to a common adiabat, as well as linear drag at depth ($p\geq 200$~bar), which mimics to first order magnetic drag. Lower boundary stability and the deep forcing assumptions were also tested with climate simulations for HD~209458b ($P_{\text{orb}}=P_{\text{rot}}=3.5$~days). HD~209458b simulations always show shallow wind jets (never deeper than 100~bar) and unperturbed superrotation. If we impose a fast rotation ($P_{\text{orb}}=P_{\text{rot}}=0.8135$~days), also the HD~209458b-like simulation shows equatorial retrograde flow at the day side. We conclude that the placement of the lower boundary at $p=200$~bar is justified for slow rotators like HD~209458b, but we suggest that it has to be placed deeper for fast-rotating, dense hot Jupiters ($P_{\text{orb}}\leq 1.5$~days) like WASP-43b. Our study highlights that the deep atmosphere may have a strong influence on the observable atmospheric flow in some hot Jupiters., Comment: Accepted by MNRAS (36 pages with Appendix)

Sub-Neptune planets are a very common type of planets. They are inferred to harbour a primordial (H/He) envelope, on top of a (rocky) core, which dominates the mass. Here, we investigate the long-term consequences of the core properties on the planet mass-radius relation. We consider the role of various core energy sources resulting from core formation, its differentiation, its solidification (latent heat), core contraction and radioactive decay. We divide the evolution of the rocky core into three phases: the formation phase, which sets the initial conditions, the magma ocean phase, characterized by rapid heat transport, and the solid state phase, where cooling is inefficient. We find that for typical sub-Neptune planets of ~2-10 Earth masses and envelope mass fractions of 0.5-10% the magma ocean phase lasts several Gyrs, much longer than for terrestrial planets. The magma ocean phase effectively erases any signs of the initial core thermodynamic state. After solidification, the reduced heat flux from the rocky core causes a significant drop in the rocky core surface temperature, but its effect on the planet radius is limited. In the long run, radioactive heating is the most significant core energy source in our model. Overall, the long term radius uncertainty by core thermal effects is up to 15%., Comment: ApJ Published

The study of extrasolar planets and of the Solar System provides complementary pieces of the mosaic represented by the process of planetary formation. Exoplanets are essential to fully grasp the huge diversity of outcomes that planetary formation and the subsequent evolution of the planetary systems can produce. The orbital and basic physical data we currently possess for the bulk of the exoplanetary population, however, do not provide enough information to break the intrinsic degeneracy of their histories, as different evolutionary tracks can result in the same final configurations. The lessons learned from the Solar System indicate us that the solution to this problem lies in the information contained in the composition of planets. The goal of the Atmospheric Remote-Sensing Infrared Exoplanet Large-survey (ARIEL), one of the three candidates as ESA M4 space mission, is to observe a large and diversified population of transiting planets around a range of host star types to collect information on their atmospheric composition. ARIEL will focus on warm and hot planets to take advantage of their well-mixed atmospheres, which should show minimal condensation and sequestration of high-Z materials and thus reveal their bulk composition across all main cosmochemical elements. In this work we will review the most outstanding open questions concerning the way planets form and the mechanisms that contribute to create habitable environments that the compositional information gathered by ARIEL will allow to tackle, Comment: 20 pages, 6 figures, accepted for publication on Experimental Astronomy, to appear in the special issue on the ESA space mission ARIEL

Recent formation and structure models of Jupiter suggest that the planet can have composition gradients and not be fully convective (adiabatic). This possibility directly affects our understanding of Jupiter's bulk composition and origin. In this Letter we present Jupiter's evolution with a primordial structure consisting of a relatively steep heavy-element gradient of 40 Earth masses. We show that for a primordial structure with composition gradients, most of the mixing occurs in the outer part of the gradient during the early evolution (several 10^7 years), leading to an adiabatic outer envelope (60% of Jupiter's mass). We find that the composition gradient in the deep interior persists, suggesting that about 40% of Jupiter's mass can be non-adiabatic with a higher temperature than the one derived from Jupiter's atmospheric properties. The region that can potentially develop layered-convection in Jupiter today is estimated to be limited to about 10% of the mass., Comment: accepted for publication in A&A Letters

Sub-Neptune planets are very common in our galaxy and show a large diversity in their mass-radius relation. In sub-Neptunes most of the planet mass is in the rocky part (hereafter core) which is surrounded by a modest hydrogen-helium envelope. As a result, the total initial heat content of such a planet is dominated by that of the core. Nonetheless, most studies contend that the core cooling will only have a minor effect on the radius evolution of the gaseous envelope, because the core's cooling is in sync with the envelope, i.e., most of the initial heat is released early on timescales of about 10-100 Myr. In this Letter we examine the importance of the core cooling rate for the thermal evolution of the envelope. Thus, we relax the early core cooling assumption and present a model where the core is characterized by two parameters: the initial temperature and the cooling time. We find that core cooling can significantly enhance the radius of the planet when it operates on a timescale similar to the observed age, i.e. several Gyr. Consequently, the interpretation of sub-Neptunes' mass-radius observations depends on the assumed core thermal properties and the uncertainty therein. The degeneracy of composition and core thermal properties can be reduced by obtaining better estimates of the planet ages (in addition to their radii and masses) as envisioned by future observations., Comment: Accepted for publication in A&A Letters

Context: Planet formation by pebble accretion is an alternative to planetesimal-driven core accretion. In this scenario, planets grow by accreting cm-to-m-sized pebbles instead of km-sized planetesimals. One of the main differences with planetesimal-driven core accretion is the increased thermal ablation experienced by pebbles. This provides early enrichment to the planet's envelope, which changes the process of core growth. Aims: We aim to predict core masses and envelope compositions of planets that form by pebble accretion and compare mass deposition of pebbles to planetesimals. Methods: We model the early growth of a proto-planet by calculating the structure of its envelope, taking into account the fate of impacting pebbles or planetesimals. The region where high-Z material can exist in vapor form is determined by the vapor pressure. We include enrichment effects by locally modifying the mean molecular weight. Results: In the pebble case, three phases of core growth can be identified. In the first phase, pebbles impact the core without significant ablation. During the second phase, ablation becomes increasingly severe. A layer of high-Z vapor starts to form around the core that absorbs a small fraction of the ablated mass. The rest either rains out to the core or mixes outwards instead, slowing core growth. In the third phase, the vapor inner region expands outwards, absorbing an increasing fraction of the ablated material as vapor. Rainout ends before the core mass reaches 0.6 M_Earth, terminating direct core growth. In the case of icy H2O pebbles, this happens before 0.1 M_Earth. Conclusions: Our results indicate that pebble accretion can directly form rocky cores up to only 0.6 M_Earth, and is unable to form similarly sized icy cores. Subsequent core growth can proceed indirectly when the planet cools, provided it is able to retain its high-Z material., Comment: 12 pages, 6 figures. Published in A&A. Includes corrigendum to Sect. 4.2

The internal structure of gas giant planets may be more complex than the commonly assumed core-envelope structure with an adiabatic temperature profile. Different primordial internal structures as well as various physical processes can lead to non-homogenous compositional distributions. A non-homogenous internal structure has a significant impact on the thermal evolution and final structure of the planets. In this paper, we present alternative structure and evolution models for Jupiter and Saturn allowing for non-adiabatic primordial structures and the mixing of heavy elements by convection as these planets evolve. We present the evolution of the planets accounting for various initial composition gradients, and in the case of Saturn, include the formation of a helium-rich region as a result of helium rain. We investigate the stability of regions with composition gradients against convection, and find that the helium shell in Saturn remains stable and does not mix with the rest of the envelope. In other cases, convection mixes the planetary interior despite the existence of compositional gradients, leading to the enrichment of the envelope with heavy elements. We show that non-adiabatic structures (and cooling histories) for both Jupiter and Saturn are feasible. The interior temperatures in that case are much higher that for standard adiabatic models. We conclude that the internal structure is directly linked to the formation and evolution history of the planet. These alternative internal structures of Jupiter and Saturn should be considered when interpreting the upcoming Juno and Cassini data., Comment: accepted for publication in ApJ

The primordial internal structures of gas giant planets are unknown. Often giant planets are modeled under the assumption that they are adiabatic, convective, and homogeneously mixed, but this is not necessarily correct. In this work, we present the first self-consistent calculation of convective transport of both heat and material as the planets evolve. We examine how planetary evolution depends on the initial composition and its distribution, whether the internal structure changes with time, and if so, how it affects the evolution. We consider various primordial distributions, different compositions, and different mixing efficiencies and follow the distribution of heavy elements in a Jupiter-mass planet as it evolves. We show that a heavy-element core cannot be eroded by convection if there is a sharp compositional change at the core-envelope boundary. If the heavy elements are initially distributed within the planet according to some compositional gradient, mixing occurs in the outer regions resulting in a compositionally homogeneous outer envelope. Mixing of heavy materials that are injected in a convective gaseous envelope are found to mix efficiently. Our work demonstrates that the primordial internal structure of a giant planet plays a substantial role in determining its long-term evolution and that giant planets can have non-adiabatic interiors. These results emphasize the importance of coupling formation, evolution, and internal structure models of giant planets self-consistently., Comment: accepted to ApJ

We model the evolution of planets with various masses and compositions. We investigate the effects of the composition and its depth dependence on the long-term evolution of the planets. The effects of opacity and stellar irradiation are also considered. It is shown that the change in radius due to various compositions can be significantly smaller than the change in radius caused by the opacity. Irradiation also affects the planetary contraction but is found to be less important than the opacity effects. We suggest that the mass-radius relationship used for characterization of observed extrasolar planets should be taken with great caution since different physical conditions can result in very different mass-radius relationships., Comment: Accepted for publication in MNRAS, 10 pages, 14 figures

We model the evolution of a Jupiter-mass protoplanet formed by the disk instability mechanism at various radial distances accounting for the presence of the disk. Using three different disk models, it is found that a newly-formed Jupiter-mass protoplanet at radial distance of $\lesssim$ 5-10 AU cannot undergo a dynamical collapse and evolve further to become a gravitational bound planet. We therefore conclude that {\it giant planets, if formed by the gravitational instability mechanism, must form and remain at large radial distances during the first $\sim$ 10$^5-10^6$ years of their evolution}. The minimum radial distances in which protoplanets of 1 Saturn-mass, 3 and 5 Jupiter-mass protoplanets can evolve using a disk model with $\dot{M}=10^{-6} M_{Sun}/yr$ and $\alpha=10^{-2}$ are found to be 12, 9, and 7 AU, respectively. The effect of gas accretion on the planetary evolution of a Jupiter-mass protoplanet is also investigated. It is shown that gas accretion can shorten the pre-collapse timescale substantially. Our study suggests that the timescale of the pre-collapse stage does not only depend on the planetary mass, but is greatly affected by the presence of the disk and efficient gas accretion., Comment: 26 pages, 2 tables, 10 figures. Accepted for publication in ApJ