Search

This work describes a silicon tracker system developed for experiments with proton-rich radioactive ion beams at the SAMURAI superconducting spectrometer of RIBF at RIKEN. The system is designed for accurate angular reconstruction and atomic number identification of relativistic heavy ions and protons which are simultaneously produced in reactions motivated by studies of proton capture reactions of interest for nuclear astrophysics. The technical characteristics of the tracking array are described in detail as are its performance in two pilot experiments. The physics justification for such a system is also presented.

The exact nature of the lowest $K^\pi =2_\gamma ^+$ rotational bands in all deformed nuclei remains obscure. Traditionally they are assumed to be collective vibrations of the nuclear shape in the $\gamma$ degree of freedom perpendicular to the nuclear symmetry axis. Very few such $\gamma$-bands have been traced past the usual back-bending rotational alignments of high-j nucleons. We have investigated the structure of positive-parity bands in the N=90 nucleus 156Dy, using the 148Nd(12C,4n)156Dy reaction at 65 MeV, observing the resulting ${\gamma}$-ray transitions with the Gammasphere array. The even- and odd-spin members of the $K^\pi =2_\gamma^+$ $\gamma$-band are observed to 32+ and 31+ respectively. This rotational band faithfully tracks the ground-state configuration to the highest spins. The members of a possible $\gamma$-vibration built on the aligned yrast S-band are observed to spins 28+ and 27+. An even-spin positive-parity band, observed to spin 24+, is a candidate for an aligned S-band built on the seniority-zero configuration of the $0_2^+$ state at 676 keV. The crossing of this band with the $0_2^+$ band is at $\hbar\omega$= 0.28(1) MeV and is consistent with the configuration of the $0_2^+$ band not producing any blocking of the monopole pairing., Comment: Published in Physics Review C

Rotational structures have been measured using the Jurogam II and GAMMASPHERE arrays at low spin following the 155Gd({\alpha},2n)157Dy and 148Nd(12C, 5n)155Dy reactions at 25 and 65 MeV, respectively. We report high-K bands, which are conjectured to be the first candidates of a K{\pi}= 2+ {\gamma} vibrational band, built on the [505]11/2- neutron orbital, in both odd-A 155, 157Dy isotopes. The coupling of the first excited K=0+ states or the so-called \b{eta} vibrational bands at 661 and 676 keV in 154Dy and 156Dy to the [505]11/2- orbital, to produce a K{\pi}=11/2- band, was not observed in both 155Dy and 157Dy, respectively. The implication of these findings on the interpretation of the first excited 0+ states in the core nuclei 154Dy and 156Dy are also discussed., Comment: Published in Physical Rev C

A Monte Carlo simulation-based optimization of a multilayer 10B-RPC thermal neutron detector is performed targeting an increase in the counting rate capability while maintaining high (>50%) detection efficiency for thermal neutrons. The converter layer thicknesses of individual RPCs are optimized for several configurations of a detector containing a stack of 10 double gap RPCs. The results suggest that it is possible to reach a counting rate which is by a factor of eight higher in comparison to the rate of a detector with only one double-gap RPC. The effect of neutron scattering inside the detector contributing to the background is analyzed and design modifications of the first detector prototype, tested at neutron beam, are suggested.

We use an underground counting lab with an extremely low background to perform an activity measurement for the $^{12}$C+$^{13}$C system with energies down to $E\rm_{c.m.}$=2.323 MeV, at which the $^{12}$C($^{13}$C,$p$)$^{24}$Na cross section is found to be 0.22(7) nb. The $^{12}$C+$^{13}$C fusion cross section is derived with a statistical model calibrated using experimental data. Our new result of the $^{12}$C+$^{13}$C fusion cross section is the first decisive evidence in the carbon isotope systems which rules out the existence of the astrophysical S-factor maximum predicted by the phenomenological hindrance model, while confirming the rising trend of the S-factor towards lower energies predicted by other models, such as CC-M3Y+Rep, DC-TDHF, KNS, SPP and ESW. After normalizing the model predictions with our data, a more reliable upper limit is established for the $^{12}$C+$^{12}$C fusion cross sections at stellar energies.

HEIMDAL is a thermal powder diffractometer designed to operate at the European Spallation Source, world's most intense neutron source. The detailed design of the instrument, which is expected to enter user operation in 2024/2025, assumes that the neutrons scattered by the powder under investigation will be collected with hundreds of large-area Multi-Wire Proportional Counters employing a $^{10}$B$_4$C-solid converter. The gas counters will consists of large active volumes and tapered trapezoidal shapes that allow for close packing into a cylindrical shell with high solid angle coverage. The whole detector will operate in an air environment within the shielding cave and provide signals with sensitivity for locating detection in three dimensions. This paper presents the results of a GEANT4 study of the baseline design for the HEIMDAL powder diffraction detector. The detector model was used to study key performance parameters such as detection efficiency and spatial resolution. The contribution of the detector to the resolving power of the instrument, one of the key figures-of-merit for powder diffractometers, was also investigated. Most of the simulation results reported in this work cannot be validated against a sufficiently similar physical reference until the first segment or module are constructed and tested with neutron beam. However, these results can help identify possible ways of optimising the detector design and provide the first glimpse into the expected performance of this technological approach.

Over the last decades, the field of thermal neutron detection has overwhelmingly employed He-3-based technologies. The He-3 crisis together with the forthcoming establishment of the European Spallation Source have necessitated the development of new technologies for neutron detection. Today, several promising He-3-free candidates are under detailed study and need to be validated. This validation process is in general long and expensive. The study of detector prototypes using neutron-emitting radioactive sources is a cost-effective solution, especially for preliminary investigations. That said, neutron-emitting sources have the general disadvantage of broad, structured, emitted-neutron energy ranges. Further, the emitted neutrons often compete with unwanted backgrounds of gamma-rays, alpha-particles, and fission-fragments. By blending experimental infrastructure such as shielding to provide particle beams with neutron-detection techniques such as tagging, disadvantages may be converted into advantages. In particular, a technique known as tagging involves exploiting the mixed-field generally associated with a neutron-emitting source to determine neutron time-of-flight and thus energy on an event-by-event basis. This allows for the definition of low-cost, precision neutron beams. The Source-Testing Facility, located at Lund University in Sweden and operated by the SONNIG Group of the Division of Nuclear Physics, was developed for just such low-cost studies. Precision tagged-neutron beams derived from radioactive sources are available around-the-clock for advanced detector diagnostic studies. Neutron measurements performed at the Source Testing Facility are thus cost-effective and have a very low barrier for entry. In this paper, we present an overview of the project., Comment: IAEA Technical Meeting on Modern Neutron Detection (F1-TM-55243)

The Multi-Grid detector technology has evolved from the proof-of-principle and characterisation stages. Here we report on the performance of the Multi-Grid detector, the MG.CNCS prototype, which has been installed and tested at the Cold Neutron Chopper Spectrometer, CNCS at SNS. This has allowed a side-by-side comparison to the performance of $^3$He detectors on an operational instrument. The demonstrator has an active area of 0.2 m$^2$. It is specifically tailored to the specifications of CNCS. The detector was installed in June 2016 and has operated since then, collecting neutron scattering data in parallel to the He-3 detectors of CNCS. In this paper, we present a comprehensive analysis of this data, in particular on instrument energy resolution, rate capability, background and relative efficiency. Stability, gamma-ray and fast neutron sensitivity have also been investigated. The effect of scattering in the detector components has been measured and provides input to comparison for Monte Carlo simulations. All data is presented in comparison to that measured by the $^3$He detectors simultaneously, showing that all features recorded by one detector are also recorded by the other. The energy resolution matches closely. We find that the Multi-Grid is able to match the data collected by $^3$He, and see an indication of a considerable advantage in the count rate capability. Based on these results, we are confident that the Multi-Grid detector will be capable of producing high quality scientific data on chopper spectrometers utilising the unprecedented neutron flux of the ESS., Comment: submitted to JINST

The ambitious instrument suite for the future European Spallation Source whose civil construction started recently in Lund, Sweden, demands a set of diverse and challenging requirements for the neutron detectors. For instance, the unprecedented high flux expected on the samples to be investigated in neutron diffraction or reflectometry experiments requires detectors that can handle high counting rates, while the investigation of sub-millimeter protein crystals will only be possible with large-area detectors that can achieve a position resolution as low as 200 {\mu}m. This has motivated an extensive research and development campaign to advance the state-of-the-art detector and to find new technologies that can reach maturity by the time the ESS will operate at full potential. This paper presents the key detector requirements for three of the Time-of-Flight diffraction instrument concepts selected by the Scientific Advisory Committee to advance into the phase of preliminary engineering design. We discuss the available detector technologies suitable for this particular instrument class and their major challenges. The detector technologies selected by the instrument teams to collect the diffraction patterns are briefly discussed. Analytical calculations, Monte-Carlo simulations, and real experimental data are used to develop a generic method to esti- mate the event rate in the diffraction detectors. The proposed approach is based upon conservative assumptions that use information and input parameters that reflect our current level of knowledge and understanding of the ESS project. We apply this method to make predictions for the future diffraction instruments, and thus provide additional information that can help the instrument teams with the optimisation of the detector designs., Comment: 25 pages, 5 figures

We present the results of the measurements of the detection efficiency for a 4.7 \r{A} neutron beam incident upon a detector incorporating a stack of up to five MultiWire Proportional Counters (MWPC) with Boron-coated cathodes. The cathodes were made of Aluminum and had a surface exhibiting millimeter-deep V-shaped grooves of 45{\deg}, upon which the thin Boron film was deposited by DC magnetron sputtering. The incident neutrons interacting with the converter layer deposited on the sidewalls of the grooves have a higher capture probability, owing to the larger effective absorption film thickness. This leads to a higher overall detection efficiency for the grooved cathode when compared to a cathode with a flat surface. Both the experimental results and the predictions of the GEANT4 model suggests that a 5-counter detector stack with coated grooved cathodes has the same efficiency as a 7-counter stack with flat cathodes. The reduction in the number of counters in the stack without altering the detection efficiency will prove highly beneficial for large-area position-sensitive detectors for neutron scattering applications, for which the cost-effective manufacturing of the detector and associated readout electronics is an important objective. The proposed detector concept could be a technological option for one of the new chopper spectrometers and other instruments planned to be built at the future European Spallation Source in Sweden. These results with macrostructured cathodes generally apply not just to MWPCs but to other gaseous detectors as well., Comment: 14 pages, 9 figures

Excited states in Ni-67 were populated in deep-inelastic reactions of a Ni-64 beam at 430 MeV on a thick U-238 target. A level scheme built on the previously known 13 micro-s isomer has been delineated up to an excitation energy of ~5.3 MeV and a tentative spin and parity of (21/2-). Shell model calculations have been carried out using two effective interactions in the f5/2pg9/2 model space with a Ni-56 core. Satisfactory agreement between experiment and theory is achieved for the measured transition energies and branching ratios. The calculations indicate that the yrast states are associated with rather complex configurations, herewith demonstrating the relative weakness of the N=40 subshell gap and the importance of multi particle-hole excitations involving the g9/2 neutron orbital., Comment: Accepted by Physical Review C

High-spin states in the odd-odd nucleus $^{168}$Ta have been populated in the $^{120}$Sn($^{51}$V,3n) reaction. Two multi-quasiparticle structures have been extended significantly from spin $\sim{20\hbar}$ to above ${40\hbar}$. As a result, the first rotational alignment has been fully delineated and a second band crossing has been observed for the first time in this nucleus. Configurations for these strongly-coupled rotational bands are proposed based on signature splitting, $B(M1)/B(E2)$ ratio information, and observed rotation-alignment behavior. Properties of the observed bands in $^{168}$Ta are compared to related structures in the neighboring odd-$Z$, odd-$N$, and odd-odd nuclei and are discussed within the framework of the cranked shell model., Comment: 9 pages, 9 figures, Gammasphere experiment

The B(E2; Ii -> If) values for transitions in 71Ga and 73Ga were deduced from a Coulomb excitation experiment at the safe energy of 2.95 MeV/nucleon using post-accelerated beams of 71,73Ga at the REX-ISOLDE on-line isotope mass separator facility. The emitted gamma rays were detected by the MINIBALL-detector array and B(E2; Ii->If) values were obtained from the yields normalized to the known strength of the 2+ -> 0+ transition in the 120Sn target. The comparison of these new results with the data of less neutron-rich gallium isotopes shows a shift of the E2 collectivity towards lower excitation energy when adding neutrons beyond N = 40. This supports conclusions from previous studies of the gallium isotopes which indicated a structural change in this isotopical chain between N = 40 and N = 42. Combined with recent measurements from collinear laser spectroscopy showing a 1/2- spin and parity for the ground state, the extracted results revealed evidence for a 1/2-; 3/2- doublet near the ground state in 73 31Ga42 differing by at most 0.8 keV in energy.

The isomeric and $\beta$-decay properties of neutron-rich $^{53-57}$Sc and $^{53,54}$Ca nuclei near neutron number $N$=32 are reported, and the low-energy level schemes of $^{53,54,56}$Sc and $^{53-57}$Ti are presented. The low-energy level structures of the $_{21}$Sc isotopes are discussed in terms of the coupling of the valence $1f_{7/2}$ proton to states in the corresponding $_{20}$Ca cores. Implications with respect to the robustness of the $N$=32 subshell closure are discussed, as well as the repercussions for a possible $N$=34 subshell closure., Comment: 17 pages, 17 figures, accepted to Phys. Rev. C

In order to test {\it ab-initio} calculations of light nuclei, we have remeasured lifetimes in $^{10}$Be using the Doppler Shift Attenuation Method (DSAM) following the $^{7}$Li($^7$Li,$\alpha$)$^{10}$Be reaction at 8 and 10 MeV. The new experiments significantly reduce systematic uncertainties in the DSAM technique. The J$^{\pi}$ = $2^+_1$ state at 3.37 MeV has $\tau$ = 205${\pm}$(5)$_{stat}\pm$(7)$_{sys}$ fs corresponding to a $B$($E2\downarrow$) of 9.2(3) $e^2$fm$^4$ in broad agreement with many calculations. The J$^{\pi}$ = $2^+_2$ state at 5.96 MeV was found to have a $B$($E2\downarrow$) of 0.11(2) $e^2$fm$^4$ and provides a more discriminating test of nuclear models. New Green's Function Monte Carlo (GFMC) calculations for these states and transitions with a number of Hamiltonians are also reported and compared to experiment., Comment: 4 Pages

We report on the investigation of the population mechanism for the 454-KeV level in 71Cu. This level was identified for the first time in a recent Coulomb excitation measurement with a radioactive beam of 71Cu. The selective nature of the Coulomb-excitation process as well as nuclear-structure considerations constrain the possible spin values for the newly observed state to Ipi=1/2-. A re-examination of the data set obtained in a beta-decay study at the LISOL separator revealed that this state is also populated in the decay of 71Ni, most probably by direct feeding from a newly identified 1/2- beta-decaying isomer having a T1/2=2.34(25) s. In this paper we investigate the proposed scenario by reanalyzing the beta-gamma and gamma-gamma coincidences obtained in the beta-decay study at LISOL., Comment: 7 pages,6 figures, PRC preprint

The neutron-rich isotopes 65,67Fe and 65Co have been produced at the LISOL facility, Louvain-La-Neuve, in the proton-induced fission of 238U. Beams of these isotopes have been extracted with high selectivity by means of resonant laser ionization combined with mass separation. Yrast and near-yrast levels of 65Co have also been populated in the 64Ni+238U reaction at Argonne National Laboratory. The level structure of 65Co could be investigated by combining all the information from both the 65Fe and 65Co beta decay and the deep-inelastic reaction. The 65Fe, 65Co and 67Fe decay schemes and the 65Co yrast structure are fully established. The 65,67Co level structures can be interpreted as resulting from the coexistence of core-coupled states with levels based on a low-energy proton-intruder configuration., Comment: 17 pages, 13 figures, preprint

The $\beta$-decay and isomeric properties of $^{54}$Sc, $^{50}$K and $^{53}$Ca are presented, and their implications with respect to the goodness of the N=32 sub-shell closure discussed., Comment: 4 pages, 3 figures, Zakopane Conference on Nuclear Physics Proceedings

The nuclear structure of 67Co has been investigated through 67Fe beta-decay. The 67Fe isotopes were produced at the LISOL facility in proton-induced fission of 238U and selected using resonant laser ionization combined with mass separation. The application of a new correlation technique unambiguously revealed a 496(33) ms isomeric state in 67Co at an unexpected low energy of 492 keV. A 67Co level scheme has been deduced. Proposed spin and parities suggest a spherical (7/2-) 67Co ground state and a deformed first excited (1/2-) state at 492 keV, interpreted as a proton 1p-2h prolate intruder state., Comment: 4 pages, 5 figures, preprint submitted to Physical Review Letters

The $B(E2;0^+\to2^+)$ value in $^{68}$Ni has been measured using Coulomb excitation at safe energies. The $^{68}$Ni radioactive beam was post-accelerated at the ISOLDE facility (CERN) to 2.9 MeV/u. The emitted $\gamma$ rays were detected by the MINIBALL detector array. A kinematic particle reconstruction was performed in order to increase the measured c.m. angular range of the excitation cross section. The obtained value of 2.8$^{+1.2}_{-1.0}$ 10$^2$ e$^2$fm$^4$ is in good agreement with the value measured at intermediate energy Coulomb excitation, confirming the low $0^+\to2^+$ transition probability., Comment: 4 pages, 5 figures

IBM-1} calculations for the fission products $^{108,110,112}$Ru have been carried out. The even-even isotopes of Ru can be described as transitional nuclei situated between the U(5) (spherical vibrator) and SO(6) ($\gamma$-unstable rotor) symmetries of the Interacting Boson Model. At first, a Hamiltonian with only one- and two-body terms has been used. Excitation energies and $B$(E2) ratios of gamma transitions have been calculated. A satisfactory agreement has been obtained, with the exception of the odd-even staggering in the quasi-$\gamma$ bands of $^{110,112}$Ru. The observed pattern is rather similar to the one for a rigid triaxial rotor. A calculation based on a Hamiltonian with three-body terms was able to remove this discrepancy. The relation between the IBM and the triaxial rotor model was also examined., Comment: 22 pages, 8 figures