Search

Capacitive Deionization (CDI) is a non-energy intensive water treatment technology. To harness the enormous potential of CDI requires improving performance, while offering industrially feasible solutions. Following this idea, the replacement of costly metallic components has been proposed as a mean of limiting corrosion problems. This work explores the use of nanostructured hybrid networks to enable free-form and metal-free CDI devices. The strategy consists of producing interpenetrated networks of highly conductive flexible carbon nanotube (CNT) fibre fabrics and nanostructured metal oxides, {\gamma}Al2O3 and TiO2, through ultrasound-assisted nanoparticle infiltration and sintering. In the resulting hybrids, a uniform distribution of porous metal oxide is firmly attached to the nanocarbon network while the flexibility, high conductivity and low-dimensional properties of the CNTs are preserved. These electrodes present a high porosity ($105 - 118 m^{2} g^{1}$), notably low electrical ($< 0,1 k \Omega cm^{2}$) and low charge transfer resistance (4 {\Omega}), thus enabling the infiltration of aqueous electrolytes and serving as current collector. In this work we built a large asymmetrical cylindrical CDI device solely made of these electrodes and conventional plastics. The cell provides, high average salt adsorption rates of $1.16 mg /g_{AM} min$ ($0.23 mg/g_{CDIunit} min$, low energy consumption ($0.18 Wh/g_{salt}$) and stable electrochemical performance above 50 cycles for brackish water desalination.

Supercapacitors capable of providing high voltage, energy and power density but yet light, low volume occupying, flexible and mechanically robust are highly interesting and demanded for portable applications. Herein, freestanding flexible hybrid electrodes based on MnO2 nanoparticles grown on macroscopic carbon nanotube fibers (CNTf-MnO2) were fabricated, without the need of any metallic current collector. The CNTf, a support with excellent electrical conductivity, mechanical stability, and appropriate pore structure, was homogeneously decorated with porous akhtenskite \epsilon-MnO2 nanoparticles produced via electrodeposition in an optimized organic-aqueous mixture. Electrochemical properties of these decorated fibers were evaluated in different electrolytes including a neutral aqueous solution and a pure 1-butyl-3-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide ionic liquid (PYR14TFSI). This comparison helps discriminate the various contributions to the total capacitance: (surface) Faradaic and non-Faradaic processes, improved wetting by aqueous electrolytes. Accordingly, symmetric supercapacitors with PYR14TFSI led to a high specific energy of 36 Whkg_(MnO_2)^(-1) (16 Whkg-1 including the weight of CNTf) and real specific power of 17 kWkg_(MnO_2)^(-1) (7.5 kWkg-1) at 3.0 V with excellent cycling stability. Moreover, flexible all solid-state supercapacitors were fabricated using PYR14TFSI-based polymer electrolyte, exhibiting maximum energy density of 21 Whkg-1 and maximum power density of 8 kWkg-1 normalized by total active material.

This work presents a scalable method to produce robust all-solid electric double layer capacitors (EDLCs), compatible with roll-to-roll processes and structural laminate composite fabrication. It consists in sandwiching and pressing an ionic liquid (IL) based polymer electrolyte membrane between two CNT fiber sheet electrodes at room temperature, and laminating with ordinary plastic film. This fabrication method is demonstrated by assembling large area devices of up to 100 cm2 with electrodes fabricated in-house, as well as with commercial CNT fiber sheets. Free-standing flexible devices operating at 3.5 V exhibited 28 F g-1 of specific capacitance, 11.4 Wh kg-1 of energy density and 46 kW kg-1 of power density. These values are nearly identical to control samples with pure ionic liquid. The solid EDLC could be repeatedly bent and folded 180{\deg} without degradation of their properties, with a reversible 25% increase in energy density in the bent state. Devices produced using CNT fiber electrodes with a higher degree of orientation and therefore better mechanical properties showed similar electrochemical properties combined with composite specific strength and modulus of 39 MPa/SG and 577 MPa/SG for a fiber mass fraction of 11 wt.%, similar to a structural thermoplastic and with higher specific strength than copper.

Finding proper electrocatalysts capable of efficient catalyzing both ORR and OER is of great importance for metal-air batteries. With increasing inclination towards structural and flexible devices, developing a high-performance self-standing air-cathode is highly demanded and challenging, as most of oxygen catalysts are powder and need to be further processed. Here, we construct highly bifunctional air catalyst from macroscopic CNT fibers (CNTf) through direct CVD spinning followed by hydrothermal method. The electrocatalytic properties of the samples were tuned by altering nitrogen-doping and defect densities readily adjusted at different hydrothermal reaction temperatures. The treated CNTfs showed excellent bifunctional activity ({\Delta}E=Ej=10-E1/2=0.81 V) and demonstrated exceptional performance as carbon-based self-standing air-cathodes in liquid and solid-state rechargeable Zn-air batteries, with high capacity of 698 mAh g-1 and ultrahigh energy density of 838 Wh kg-1. The rechargeable Zn-air batteries exhibit a low discharge-charge overpotential and excellent stability. This work provides novel simply achieved self-standing air electrodes with exceptional performance for structural Zn-air batteries.