Search

Spaceplates have emerged in the context of nonlocal metasurfaces, enabling the compression of optical systems by minimizing the required empty space between their components. In this work, we design and analyze spaceplates that support resonances with opposite symmetries, operating under the so-called Huygens' condition. Using the temporal coupled-mode theory, we demonstrate that the spatial compression provided by Huygens' spaceplates is twice that of conventional single-resonance counterparts. Additionally, they can support broader operational bandwidths and numerical apertures, facilitating the reduction of chromatic aberrations. Moreover, Huygens' spaceplates maintain nearly full transparency over a wide frequency and angular range, allowing their straightforward cascading for multi-frequency broadband operation. Finally, we propose a physical implementation of a Huygens' spaceplate for optical frequencies based on a photonic crystal slab geometry., Comment: 9 pages, 5 figures

The Cheyette model is a quasi-Gaussian volatility interest rate model widely used to price interest rate derivatives such as European and Bermudan Swaptions for which Monte Carlo simulation has become the industry standard. In low dimensions, these approaches provide accurate and robust prices for European Swaptions but, even in this computationally simple setting, they are known to underestimate the value of Bermudan Swaptions when using the state variables as regressors. This is mainly due to the use of a finite number of predetermined basis functions in the regression. Moreover, in high-dimensional settings, these approaches succumb to the Curse of Dimensionality. To address these issues, Deep-learning techniques have been used to solve the backward Stochastic Differential Equation associated with the value process for European and Bermudan Swaptions; however, these methods are constrained by training time and memory. To overcome these limitations, we propose leveraging Tensor Neural Networks as they can provide significant parameter savings while attaining the same accuracy as classical Dense Neural Networks. In this paper we rigorously benchmark the performance of Tensor Neural Networks and Dense Neural Networks for pricing European and Bermudan Swaptions, and we show that Tensor Neural Networks can be trained faster than Dense Neural Networks and provide more accurate and robust prices than their Dense counterparts., Comment: 16 pages, 9 figures, 2 tables, minor changes

Topological superconductors are foreseen as good candidates for the search of Majorana zero modes, where they appear as edge states and can be used for quantum computation. In this context, it becomes necessary to study the robustness and behavior of electron states in topological superconductors when a magnetic or non-magnetic impurity is present. We focus on scattering resonances in the bands and on spin texture to know what the spin behavior of the electrons in the system will be. We find that the scattering resonances appear outside the superconducting gap, thus providing evidence of topological robustness. We also find non-trivial and anisotropic spin textures related to the Dzyaloshinskii-Moriya interaction. The spin textures show a Ruderman-Kittel-Kasuya-Yosida interaction governed by Friedel oscillations. We believe that our results are useful for further studies which consider many-point-impurity scattering or a more structured impurity potential with a finite range.

The catalyst-free synthesis of graphene on dielectrics prevents the damage induced by the transfer process. Although challenging, to master this synthesis would boost the integration of graphene on consumer electronics since defects hinder its optoelectronic properties. In this work, the influence of the different surface terminations of c-plane sapphire substrates on the synthesis of graphene via plasma-enhanced chemical vapour deposition (PECVD) is studied. The different terminations of the sapphire surface are controlled by a plasma etching process. A design of experiments (DoE) procedure was carried out to evaluate the major effects governing the etching process of four different parameters: i.e. discharge power, time, pressure and gas employed. In the characterization of the substrate, two sapphire surface terminations were identified and characterized by means of contact angle measurements, being a hydrophilic (hydrophobic) surface the fingerprint of an Al- (OH-) terminated surface, respectively. The defects within the synthesized graphene were analysed by Raman spectroscopy. Notably, we found that the ID/IG ratio decreases for graphene grown on OH-terminated surfaces. Furthermore, two different regimes related to the nature of graphene defects were identified and depending on the sapphire terminated surface are bound either to vacancy or boundary like defects. Finally, studying the density of defects and the crystallite area, as well as their relationship with the sapphire surface termination paves the way for increasing the crystallinity of the synthesized graphene., Comment: 27 pages, 6 figures

Combinatorial optimization problems are ubiquitous in industry. In addition to finding a solution with minimum cost, problems of high relevance involve a number of constraints that the solution must satisfy. Variational quantum algorithms have emerged as promising candidates for solving these problems in the noisy intermediate-scale quantum stage. However, the constraints are often complex enough to make their efficient mapping to quantum hardware difficult or even infeasible. An alternative standard approach is to transform the optimization problem to include these constraints as penalty terms, but this method involves additional hyperparameters and does not ensure that the constraints are satisfied due to the existence of local minima. In this paper, we introduce a new method for solving combinatorial optimization problems with challenging constraints using variational quantum algorithms. We propose the Multi-Objective Variational Constrained Optimizer (MOVCO) to classically update the variational parameters by a multiobjective optimization performed by a genetic algorithm. This optimization allows the algorithm to progressively sample only states within the in-constraints space, while optimizing the energy of these states. We test our proposal on a real-world problem with great relevance in finance: the Cash Management problem. We introduce a novel mathematical formulation for this problem, and compare the performance of MOVCO versus a penalty based optimization. Our empirical results show a significant improvement in terms of the cost of the achieved solutions, but especially in the avoidance of local minima that do not satisfy any of the mandatory constraints., Comment: 19 pages, 9 figures + appendix (4 pages, 2 figures)

Invisibility cloaks have become one of the most outstanding developments among the wide range of applications in the field of metamaterials. So far, most efforts in invisibility science have been devoted to achieving practically realizable cloak designs and to improving the effectiveness of these devices in reducing their scattering cross-section (SCS), a scalar quantity accounting for the total electromagnetic energy scattered by an object. In contrast, little attention has been paid to the opposite side of the technology: the development of more efficient techniques for the detection of invisibility devices. For instance, the SCS ignores the phase change introduced by the cloak, as well as the angular dependence of the incident and scattered waves. Here, we propose to take advantage of the smarter way in which diffraction tomography processes all this overlooked information to improve the efficiency in unveiling the presence of invisibility devices. We show that this approach not only results in a considerable sensitivity enhancement in the detection of different kinds of cloaks based on both scattering cancellation and transformation optics, but also enables us to even obtain images depicting the approximate shape and size of the cloak. As a side result, we find that scattering cancellation coatings may be used to enhance the contrast of tomographic images of closely-packed particles. Our work could be easily extended to the detection of sound cloaks., Comment: 10 pages, 11 figures

In this work we investigate novel spherical core-shell nanoparticles with band inversion. The core and the embedding medium are normal semiconductors while the shell material is assumed to be a topological insulator. The envelope functions are found to satisfy a Dirac-like equation that can be solved in a closed form. The core-shell nanoparticle supports midgap bound states located at both interfaces due to band inversion. These states are robust since they are topologically protected. The energy spectrum presents mirror symmetry due to the chiral symmetry of the Dirac-like Hamiltonian. As a major result, we show that the thickness of the shell acts as an additional parameter for the fine tuning of the energy levels, which paves the way for electronics and optoelectronics applications.

Weyl semimetals are prominent examples of topologically protected quantum matter. These materials are the three-dimensional counterparts of graphene and great efforts are being devoted to achieve a thorough understanding of their fundamental physics. In this work, we aim at contributing to this end by discussing the effect of a single magnetic impurity in Weyl semimetals as a first step towards considering a larger number of impurities. We find that resonances appear in the local density of states with a Friedel-like behaviour, oscillating as a function of distance. By studying the spin-resolved local density of states, we can observe non-trivial and anisotropic spin textures where the spin components perpendicular to the spin of the impurity wind around the latter, until the spin becomes completely parallel to the impurity right at the interface. Friedel oscillations also play a relevant role in the form of the spin textures, forming an oscillatory pattern. We believe our results can pave the way to further studies which consider the presence of a large number of random magnetic impurities.

We consider the three-dimensional Hamiltonian for Bi$_2$Se$_3$, a second-generation topological insulator, under the effect of a periodic drive for both in-plane and out-of-plane fields. As it will be shown by means of high-frequency expansions up to second order in the Floquet Hamiltonian, the driving induces anisotropies in the Dirac cone and opens up a quasienergy gap for in-plane elliptically polarized fields. Analytic expressions are obtained for the renormalized velocities and the quasienergy gap. These expressions are then compared to numerical calculations performed by discretizing the Hamiltonian in a one-dimensional lattice and following a staggered fermion approach, achieving a remarkable agreement. We believe our work may have an impact on the transport properties of topological insulators.

Soft substrates decorated with micropillar arrays are known to be sensitive to deflection due to capillary action. In this work, we demonstrate micropillared epoxy surfaces are sensitive to single drops of bacterial suspensions. The micropillars can show significant deformations upon evaporation, just as capillary action does in soft substrates. The phenomenon has been studied with five bacterial strains S. epidermidis, L. sakei, P. aeruginosa, E. coli and B. subtilis. The results reveal that only droplets containing motile microbes with flagella stimulate micropillar bending, which leads to significant distortions and pillar aggregations forming dimers, trimers, and higher order clusters. Such deformation is manifested in characteristic patterns that are left on the microarrayed surface following evaporation, and can be easily identified even by the naked eye. Our findings could lay the ground for the design and fabrication of mechanically responsive substrates, sensitive to specific types of microorganisms.

We investigate the consequences of applying electric fields perpendicularly to thin films of topological semimetals. In particular, we consider Weyl and Dirac semimetals in a configuration such that their surface Fermi arcs lie on opposite edges of the films. We develop an analytical approach based on perturbation theory and a single-surface approximation and we compare our analytical results with numerical calculations. The effect of the electric field on the dispersion is twofold: it shifts the dispersion relation and renormalizes the Fermi velocity, which would, in turn, have direct effects on quantum transport measurements. Additionally, it modifies the spatial decay properties of surface states which will impact the connection of the Fermi arcs in opposite sides of a narrow thin film., Comment: 10 pages, 10 figures

We propose to Floquet-engineer Dirac cones at the surface of a three-dimensional topological insulator. We show that a large tunability of the Fermi velocity can be achieved as a function of the polarization, direction and amplitude of the driving field. Using this external control, the Dirac cones in the quasienergy spectrum may become elliptic or massive, in accordance to experimental evidences. These results help us to understand the interplay of surface states and external ac driving fields in topological insulators. In our work we use the full Hamiltonian for the three-dimensional system instead of effective surface Hamiltonians, which are usually considered in the literature. Our findings show that the Dirac cones in the quasienergy spectrum remain robust even in the presence of bulk states and, therefore, they validate the usage of effective surface Hamiltonians to explore the properties of Floquet-driven topological boundaries. Furthermore, our model allows us to introduce new out-of-plane field configurations, which cannot be accounted for by effective surface Hamiltonians.

A topological boundary can be formed at the interface between a trivial and a topological insulator. The difference in the topological index across the junction leads to robust gapless surface states. Optical studies of these states are scarce in the literature, the reason being the difficulty to isolate their response from that of the bulk. In this work, we propose to deposit a $\delta$ layer of donor impurities in close proximity to a topological boundary to help detecting gapless surface states. As we will show, gapless surface states are robust against this perturbation and they enhance intraband optical transitions as measured by the oscillator strength. These results allow to understand the interplay of surface and bulk states in topological insulators.

Several IV-VI semiconductor compounds made of heavy atoms, such as Pb$_{1-x}$Sn$_{x}$Te, may undergo band-inversion at the $L$ point of the Brillouin zone upon variation of their chemical composition. This inversion gives rise to topologically distinct phases, characterized by a change in a topological invariant. In the framework of the $\mathbf{k}\cdot\mathbf{p}$ theory, band-inversion can be viewed as a change of sign of the fundamental gap. A two-band model within the envelope-function approximation predicts the appearance of midgap interface states with Dirac cone dispersions in band-inverted junctions, namely, when the gap changes sign along the growth direction. We present a thorough study of these interface electron states in the presence of crossed electric and magnetic fields, the electric field being applied along the growth direction of a band-inverted junction. We show that the Dirac cone is robust and persists even if the fields are strong. In addition, we point out that Landau levels of electron states lying in the semiconductor bands can be tailored by the electric field. Tunable devices are thus likely to be realizable exploiting the properties studied herein.

In IV-VI semiconductor heterojunctions with band-inversion, such as those made of Pb$_{1-x}$Sn$_{x}$Te or Pb$_{1-x}$Sn$_{x}$Se, interface states are properly described by a two-band model, predicting the appearance of a Dirac cone in single junctions. However, in quantum wells the interface dispersion is quadratic in momentum and the energy spectrum presents a gap. We show that the interface gap shrinks under an electric field parallel to the growth direction. Therefore, the interface gap can be dynamically tuned in experiments on double-gated quantum wells based on band-inverted compounds.

Topological phases of matter are often characterized by interface states, which were already known to occur at the boundary of a band-inverted junction in semiconductor heterostructures. In IV-VI compounds such interface states are properly described by a two-band model, predicting the appearance of a Dirac cone in single junctions. We study the quantum-confined Stark effect of interface states due to an electric field perpendicular to a band-inverted junction. We find a closed expression to obtain the interface dispersion relation at any field strength and show that the Dirac cone widens under an applied bias. Thus, the Fermi velocity can be substantially lowered even at moderate fields, paving the way for tunable band-engineered devices based on band-inverted junctions.

Dirac materials are characterized by energy-momentum relations that resemble those of relativistic massless particles. Commonly denominated Dirac cones, these dispersion relations are considered to be their essential feature. These materials comprise quite diverse examples, such as graphene and topological insulators. Band-engineering techniques should aim to a full control of the parameter that characterizes the Dirac cones: the Fermi velocity. We propose a general mechanism that enables the fine-tuning of the Fermi velocity in Dirac materials in a readily accessible way for experiments. By embedding the sample in a uniform electric field, the Fermi velocity is substantially modified. We first prove this result analytically, for the surface states of a topological insulator/semiconductor interface, and postulate its universality to other Dirac materials. Then we check its correctness in carbon-based Dirac materials, namely graphene nanoribbons and nanotubes, thus showing the validity of our hypothesis in both continuum and tight-binding calculations and in different Dirac systems.

Neutron-rich light nuclei and their reactions play an important role for the creation of chemical elements. Here, data from a Coulomb dissociation experiment on $^{20,21}$N are reported. Relativistic $^{20,21}$N ions impinged on a lead target and the Coulomb dissociation cross section was determined in a kinematically complete experiment. Using the detailed balance theorem, the $^{19}\mathrm{N}(\mathrm{n},\gamma)^{20}\mathrm{N}$ and $^{20}\mathrm{N}(\mathrm{n},\gamma)^{21}\mathrm{N}$ excitation functions and thermonuclear reaction rates have been determined. The $^{19}\mathrm{N}(\mathrm{n},\gamma)^{20}\mathrm{N}$ rate is up to a factor of 5 higher at $T<1$\,GK with respect to previous theoretical calculations, leading to a 10\,\% decrease in the predicted fluorine abundance.

In this paper we have studied, by means of high-resolution neutron powder diffraction and magnetic susceptibility, the structural and magnetic features of selected samples of the HoBaCo2O5+delta layered cobaltite in the low oxygen content range (0.02

In this work we present the result of the first experimental investigation of the role of oxygen content on the properties of the HoBaCo2O5+delta layered cobaltite. We have measured the variation of oxygen content as a function of temperature and oxygen partial pressure by means of thermogravimetry coupled to chemical titration analysis. On selected samples of accurately known oxygen content we have undertaken a systematic investigation of their structural, thermal and magnetic properties by means of x-ray diffraction, differential scanning calorimetry and magnetometry. The overall results gained by this study confirm the central role of oxygen content on the properties of these materials suggesting that, for the Ho composition, even very slight variation of the order of delta=0.01 has a dramatic influence on the magnetic and transport properties of the samples. In addition, we have presented results showing the strategy to check the quality of samples prepared at selected oxygen contents by annealing procedures., Comment: 37 pages, 12 figures