Search

Robust adaptive beamforming (RAB) based on interference-plus-noise covariance (INC) matrix reconstruction can experience performance degradation when model mismatch errors exist, particularly when the input signal-to-noise ratio (SNR) is large. In this work, we devise an efficient RAB technique for dealing with covariance matrix reconstruction issues. The proposed method involves INC matrix reconstruction using an idea in which the power and the steering vector of the interferences are estimated based on the power method. Furthermore, spatial match processing is computed to reconstruct the desired signal-plus-noise covariance matrix. Then, the noise components are excluded to retain the desired signal (DS) covariance matrix. A key feature of the proposed technique is to avoid eigenvalue decomposition of the INC matrix to obtain the dominant power of the interference-plus-noise region. Moreover, the INC reconstruction is carried out according to the definition of the theoretical INC matrix. Simulation results are shown and discussed to verify the effectiveness of the proposed method against existing approaches., Comment: 7 pages, 2 figures

This work presents a cost-effective technique for designing robust adaptive beamforming algorithms based on efficient covariance matrix reconstruction with iterative spatial power spectrum (CMR-ISPS). The proposed CMR-ISPS approach reconstructs the interference-plus-noise covariance (INC) matrix based on a simplified maximum entropy power spectral density function that can be used to shape the directional response of the beamformer. Firstly, we estimate the directions of arrival (DoAs) of the interfering sources with the available snapshots. We then develop an algorithm to reconstruct the INC matrix using a weighted sum of outer products of steering vectors whose coefficients can be estimated in the vicinity of the DoAs of the interferences which lie in a small angular sector. We also devise a cost-effective adaptive algorithm based on conjugate gradient techniques to update the beamforming weights and a method to obtain estimates of the signal of interest (SOI) steering vector from the spatial power spectrum. The proposed CMR-ISPS beamformer can suppress interferers close to the direction of the SOI by producing notches in the directional response of the array with sufficient depths. Simulation results are provided to confirm the validity of the proposed method and make a comparison to existing approaches, Comment: 14 pages, 8 figures

In this work, a simple and effective robust adaptive beamforming technique is proposed for uniform linear arrays, which is based on the power spectral estimation and uncertainty region (PSEUR) of the interference plus noise (IPN) components. In particular, two algorithms are presented to find the angular sector of interference in every snapshot based on the adopted spatial uncertainty region of the interference direction. Moreover, a power spectrum is introduced based on the estimation of the power of interference and noise components, which allows the development of a robust approach to IPN covariance matrix reconstruction. The proposed method has two main advantages. First, an angular region that contains the interference direction is updated based on the statistics of the array data. Secondly, the proposed IPN-PSEUR method avoids estimating the power spectrum of the whole range of possible directions of the interference sector. Simulation results show that the performance of the proposed IPN-PSEUR beamformer is almost always close to the optimal value across a wide range of signal-to-noise ratios., Comment: 14 figures, 11 pages

In this work, we present an energy-efficient distributed learning framework using low-resolution ADCs and coarsely quantized signals for Internet of Things (IoT) networks. In particular, we develop a distributed quantization-aware least-mean square (DQA-LMS) algorithm that can learn parameters in an energy-efficient fashion using signals quantized with few bits while requiring a low computational cost. We also carry out a statistical analysis of the proposed DQA-LMS algorithm that includes a stability condition. Simulations assess the DQA-LMS algorithm against existing techniques for a distributed parameter estimation task where IoT devices operate in a peer-to-peer mode and demonstrate the effectiveness of the DQA-LMS algorithm., Comment: 5 pages, 4 figures. arXiv admin note: substantial text overlap with arXiv:2012.10939

In this letter, we present a novel low-complexity adaptive beamforming technique using a stochastic gradient algorithm to avoid matrix inversions. The proposed method exploits algorithms based on the maximum entropy power spectrum (MEPS) to estimate the noise-plus-interference covariance matrix (MEPS-NPIC) so that the beamforming weights are updated adaptively, thus greatly reducing the computational complexity. MEPS is further used to reconstruct the desired signal covariance matrix and to improve the estimate of the desired signals's steering vector (SV). Simulations show the superiority of the proposed MEPS-NPIC approach over previously proposed beamformers., Comment: 6 pages, 4 figures

In this work, we present an energy-efficient distributed learning framework using coarsely quantized signals for Internet of Things (IoT) networks. In particular, we develop a distributed quantization-aware recursive least squares (DQA-RLS) algorithm that can learn parameters in an energy-efficient fashion using signals quantized with few bits while requiring a low computational cost. Numerical results assess the DQA-RLS algorithm against existing techniques for a distributed parameter estimation task where IoT devices operate in a peer-to-peer mode., Comment: 6 pages, 5 figures

Double-layered Sr3Ru2O7 has received phenomenal consideration because it exhibits a plethora of exotic phases when perturbed. New phases emerge with the application of pressure, magnetic field, or doping. Here we show that creating a surface is an alternative and effective way to reveal hidden phases that are different from those seen in the bulk by investigating the surface properties of Sr3(Ru1-xMnx)2O7. Driven by the tilt distortion of RuO6 octahedra, the surface of Sr3Ru2O7 is less metallic than the bulk. In contrast, because of the vanishing of tilt and enhanced rotation with Mn-doping, the surface of Sr3(Ru0.84Mn0.16)2O7 is metallic while the bulk is insulating. Our result demonstrates that the electronic and structural properties at the surface are intimately coupled and consistent with quasi two-dimensional character.

We report temperature and thermal-cycling dependence of surface and bulk structures of double-layered perovskite Sr3Ru2O7 single crystals. The surface and bulk structures were investigated using low-energy electron diffraction (LEED) and single-crystal X-ray diffraction (XRD) techniques, respectively. Single-crystal XRD data is in good agreement with previous reports for the bulk structure with RuO6 octahedral rotation, which increases with decreasing temperature (~ 6.7(6)degrees at 300 K and ~ 8.1(2) degrees at 90 K). LEED results reveal that the octahedra at the surface are much more distorted with a higher rotation angle (~ 12 degrees between 300 and 80 K) and a slight tilt ((4.5\pm2.5) degrees at 300 K and (2.5\pm1.7) degrees at 80 K). While XRD data confirms temperature dependence of the unit cell height/width ratio (i.e. lattice parameter c divided by the average of parameters a and b) found in a prior neutron powder diffraction investigation, both bulk and surface structures display little change with thermal cycles between 300 and 80 K., Comment: 25 pages, 5 figures, 5 tables, to appear in Physical Review B

BaFe2As2 exhibits properties characteristic of the parent compounds of the newly discovered iron (Fe)-based high-TC superconductors. By combining the real space imaging of scanning tunneling microscopy/spectroscopy (STM/S) with momentum space quantitative Low Energy Electron Diffraction (LEED) we have identified the surface plane of cleaved BaFe2As2 crystals as the As terminated Fe-As layer - the plane where superconductivity occurs. LEED and STM/S data on the BaFe2As2(001) surface indicate an ordered arsenic (As) - terminated metallic surface without reconstruction or lattice distortion. It is surprising that the STM images the different Fe-As orbitals associated with the orthorhombic structure, not the As atoms in the surface plane., Comment: 12 pages, 4 figures

The surface structural phases of Ca(2-x)Sr(x)RuO(4) are investigated using quantitative Low Energy Electron Diffraction. The broken symmetry at the surface enhances the structural instability against the RuO6 rotational distortion while diminishing the instability against the RuO6 tilt distortion occurring within the bulk crystal. As a result, suppressed structural and electronic surface phase transition temperatures are observed, including the appearance of an inherent Mott metal-to-insulator transition for x = 0.1 and possible modifications of the surface quantum critical point near xc ~ 0.5., Comment: 4 pages, 4 figures