Search

Cosmic dust models are key ingredients in advancing our understanding of astronomical environments as diverse as interstellar clouds in galaxies, circumstellar envelopes around evolved and young stars, and protoplanetary disks. Such models consist of several dust populations, each with different compositions and size distributions. They may also consider different grain shapes, although most models assume spherical grains. All include a component of silicate dust. The absorption and emission properties of these dust components are calculated from the optical constants of each dust material which have various experimental, phenomenological, and theoretical origins depending on the model. We aim to provide the community with new sets of optical constants for amorphous silicate dust analogues at low temperatures. The analogues consist of four Mg-rich silicate samples of stoichiometry ranging from enstatite to olivine, and of eight samples of Mg and Fe rich silicates with a pyroxene stoichiometry and differing magnesium and iron content. We calculated the optical constants from transmission measurements using the Kramers-Kronig relations, assuming that the grains are small compared to the wavelength and prolate in shape with axis ratios of 1.5 and 2 for the Mg and Fe rich samples, respectively. New optical constants for silicate dust analogues were calculated over the wavelength range from 5 to 800-1000 microns, depending on the sample, and at temperatures of 10, 30, 100, 200, and 300 K.We determined the uncertainties on the derived optical constants based on the assumptions used to calculate them. To facilitate the use of these data in cosmic dust models, we provide optical constants extrapolated outside the measured spectral range into the UV-NIR and mm-cm wavelength ranges, as well as formulae that can be used to interpolate them at any temperature in the range 10 - 300 K.

To model the cold dust emission observed in the diffuse interstellar medium, in dense molecular clouds or in cold clumps that could eventually form new stars, it is mandatory to know the physical and spectroscopic properties of this dust and to understand its emission. This work is a continuation of previous studies aiming at providing astronomers with spectroscopic data of realistic cosmic dust analogues for the interpretation of observations. Ferromagnesium amorphous silicate dust analogues were produced with a mean composition close to $\mathrm{Mg_{1-x}Fe_{x}SiO_3}$ with x = 0.1, 0.2, 0.3, 0.4. Part of each sample was annealed at 500$^{\circ}$C for two hours in a reducing atmosphere to modify the oxidation state of iron. We have measured the mass absorption coefficient (MAC) of these ferromagnesium amorphous silicate dust analogues in the spectral domain 30 - 1000 $\mu$m for grain temperature in the range 10 - 300 K and at room temperature in the 5 - 40 $\mu$m range. The MAC of ferromagnesium samples behaves in the same way as the MAC of pure Mg-rich amorphous silicate samples. In the 30 - 300 K range, the MAC increases with increasing grain temperature whereas in the range 10 - 30 K, we do not see any change of the MAC. The MAC cannot be described by a single power law in ${\lambda}^{-\beta}$. The MAC of all the samples is much higher than the MAC calculated by dust models. The complex behavior of the MAC of amorphous silicates with wavelength and temperature is observed whatever the exact silicate composition (Mg vs. Fe amount). It is a universal characteristic of amorphous materials, and therefore of amorphous cosmic silicates, that should be taken into account in astronomical modeling. The enhanced MAC of the measured samples compared to the MAC calculated for cosmic dust model implies that dust masses are overestimated by the models.

A wealth of data from the Herschel and Planck satellites and now from ALMA, revealing cold dust thermal emission, is available for astronomical environments ranging from interstellar clouds, cold clumps, circumstellar envelops, and protoplanetary disks. The interpretation of these observations relies on the understanding and modeling of cold dust emission and on the knowledge of the dust optical properties. The aim of this work is to provide astronomers with a set of spectroscopic data of realistic interstellar dust analogues that can be used to interpret the observations. Glassy silicates of mean composition (1-x)MgO - xSiO2 with x = 0.35, 0.40 and 0.50 were synthesized. The mass absorption coefficient (MAC) of the samples was measured in the spectral domain 30 - 1000 $\mu$m for grain temperature in the range 300 K - 10 K and at room temperature in the 5 - 40 $\mu$m domain. We find that the MAC of all samples varies with the grains temperature. In the FIR/submm, and above 30K, the MAC value at a given wavelength increases with the temperature as thermally activated absorption processes appear. The studied materials exhibit different and complex behaviors at long wavelengths (lambda $\geq$ 200 to 700 $\mu$m depending on the samples) and the MAC cannot be approximated by a single power law in ${\lambda}^{-\beta}$. These behaviors are attributed to the amorphous nature of dust and to the amount and nature of the defects within this amorphous structure. Above 20 $\mu$m, the measured MAC are much higher than the MAC calculated from interstellar silicate dust models indicating that the analogues measured in this study are more emissive than the silicates in cosmic dust models. This has important astrophysical implications because masses are overestimated by the models. Moreover, constraints on elemental abundance of heavy elements in cosmic dust models are relaxed

The influence of a transverse static magnetic field on the magnetic hyperthermia properties is studied on a system of large-losses ferromagnetic FeCo nanoparticles. The simultaneous measurement of the high-frequency hysteresis loops and of the temperature rise provides an interesting insight into the losses and heating mechanisms. A static magnetic field of only 40 mT is enough to cancel the heating properties of the nanoparticles, a result reproduced using numerical simulations of hysteresis loops. These results cast doubt on the possibility to perform someday magnetic hyperthermia inside a magnetic resonance imaging setup., Comment: 6 pages, 3 figures

Cold dust grains emission in the FIR/submm is usually expressed as a modified black body law in which the dust mass absorption coefficient (MAC), is described with a temperature- and wavelength-independent emissivity spectral index, beta. However, numerous data from space and balloon-born missions and recently from Herschel and Planck show that dust emission is not well understood, as revealed by the observed anti-correlation of beta with the grain temperature. In order to give astronomers the necessary data to interpret FIR/submm observations, we synthesised analogues of interstellar amorphous and crystalline silicate grains, rich in Mg and Ca, and having stiochiometry of olivine and pyroxene and measured their MAC, in the 100-1000/1500 \mum range for grain temperatures varying from 300 to 10 K. We find that the grain MAC decreases when the grain temperature decreases and that the local spectral index, beta, defined as the slope of the MAC curve, is anti-correlated with the grain temperature. These variations, which are not observed in the crystallised samples, are related to the amorphous nature of the samples. In addition, the spectral shape of the MAC is complex: at short wavelengths (lambda < 500/700 \mum), beta is in the range 1.6 - 2.1 for all grain temperature and grain composition whereas at longer wavelengths (lambda > 500/700 \mum), beta < 2 for samples with a pyroxene stoichiometry and beta > 2 for samples with an olivine stoichiometry. Hence, the simplifying asymptotic expression based on a single temperature- and wavelength-independent spectral index used by astronomers is not appropriate to describe the dust MAC and thus the dust emission, and may induce significant errors on the derived parameters such as the dust mass and the dust physical and chemical properties. Instead, dust emission models should use the dust MAC as a function of wavelength and temperature.

We propose a new description of astronomical dust emission in the spectral region from the Far-Infrared to millimeter wavelengths. Unlike previous classical models, this description explicitly incorporates the effect of the disordered internal structure of amorphous dust grains. The model is based on results from solid state physics, used to interpret laboratory data. The model takes into account the effect of absorption by Disordered Charge Distribution, as well as the effect of absorption by localized Two Level Systems. We review constraints on the various free parameters of the model from theory and laboratory experimental data. We show that, for realistic values of the free parameters, the shape of the emission spectrum will exhibit very broad structures which shape will change with the temperature of dust grains in a non trivial way. The spectral shape also depends upon the parameters describing the internal structure of the grains. This opens new perspectives as to identifying the nature of astronomical dust from the observed shape of the FIR/mm emission spectrum. A companion paper will provide an explicit comparison of the model with astronomical data., Comment: accepted in A&A, 21 pages, 9 figures