Search

Higher spatial resolution and larger imaging scene are always the goals pursued by advanced space-borne SAR system.High resolution and wide swath SAR imaging can provide more information about the illuminated scene of interest on one hand,but also come with some new challenges on the other hand.The induced new challenging problems include curved orbit,Earth rotation,and spherical ground surface,etc.Most existing image formation algorithms suffer from performance deficiency in these challenging cases,either in focus accuracy or computational efficiency.In this paper,an accurate Fourier transform relationship between the phase history domain data and the scene reflectivity function is derived under arbitrary radar trajectory by exploiting the spherical geometry property of the space-borne SAR data collection.Using the derived new data model,an image reconstruction algorithm based on Fourier inversion is proposed.The new algorithm has the inherent capability of correcting for the curved orbit and spherical ground surface effect.Meanwhile,the out-of-plane motion effect induced by the Earth's rotation can also be compensated by a two-step phase correction and data projection procedure embedded in the Fourier inversion reconstruction.The new algorithm inherits the merit of both time domain and frequency domain algorithms,has excellent performance in both focus accuracy and computational efficiency.Both simulation and real data processing results validate the effectiveness of the proposed imaging algorithm., Comment: 13 pages, 15 figures

Filtered backprojection (FBP) algorithm is a popular choice for complicated trajectory SAR image formation processing due to its inherent nonlinear motion compensation capability. However, how to efficiently autofocus the defocused FBP imagery when the motion measurement is not accurate enough is still a challenging problem. In this paper, a new interpretation of the FBP derivation is presented from the Fourier transform point of view. Based on this new viewpoint, the property of the residual 2-D phase error in FBP imagery is analyzed in detail. Then, by incorporating the derived a priori knowledge on the 2-D phase error, an accurate and efficient 2-D autofocus approach is proposed. The new approach performs the parameter estimation in a dimension-reduced parameter subspace by exploiting the a priori analytical structure of the 2-D phase error, therefore possesses much higher accuracy and efficiency than conventional blind methods. Finally, experimental results clearly demonstrate the effectiveness and robustness of the proposed method., Comment: 14 pages, 24 figures

Due to uncertainty on target's motion, the range cell migration (RCM) and azimuth phase error (APE) of moving targets can't be completely compensated in synthetic aperture radar (SAR) processing. Therefore, moving targets often appear two-dimensional (2-D) defocused in SAR images. In this paper, a 2-D autofocus method for refocusing defocused moving targets in SAR images is presented. The new method only requires a direct estimate of APE, while the residual 2-D phase error ( or RCM) is computed from the estimated APE by exploiting the analytical relationship between the 2-D phase error ( or RCM) and APE. Because the parameter estimation is performed in the reduced-dimension space by exploiting prior knowledge on phase error structure, the proposed approach offers clear advantages in both computational efficiency and estimation accuracy., Comment: 11 pages, 5 figures

Conventional two-dimensional (2-D) autofocus algorithms blindly estimate the phase error in the sense that they do not exploit any a priori information on the structure of the 2-D phase error. As such, they often suffer from low computational efficiency and lack of data redundancy to accurately estimate the 2-D phase error. In this paper, a knowledge-aided (KA) 2-D autofocus algorithm which is based on exploiting a priori knowledge about the 2-D phase error structure, is presented. First, as a prerequisite of the proposed KA method, the analytical structure of residual 2-D phase error in SAR imagery is investigated in the polar format algorithm (PFA) framework. Then, by incorporating this a priori information, a novel 2-D autofocus approach is proposed. The new method only requires an estimate of azimuth phase error and/or residual range cell migration, while the 2-D phase error can then be computed directly from the estimated azimuth phase error or residual range cell migration. This 2-D autofocus method can also be applied to refocus moving targets in PFA imagery. Experimental results clearly demonstrate the effectiveness and robustness of the proposed method.

Synthetic aperture radar (SAR) images are often blurred by phase perturbations induced by uncompensated sensor motion and /or unknown propagation effects caused by turbulent media. To get refocused images, autofocus proves to be useful post-processing technique applied to estimate and compensate the unknown phase errors. However, a severe drawback of the conventional autofocus algorithms is that they are only capable of removing one-dimensional azimuth phase errors (APE). As the resolution becomes finer, residual range cell migration (RCM), which makes the defocus inherently two-dimensional, becomes a new challenge. In this paper, correction of APE and residual RCM are presented in the framework of polar format algorithm (PFA). First, an insight into the underlying mathematical mechanism of polar reformatting is presented. Then based on this new formulation, the effect of polar reformatting on the uncompensated APE and residual RCM is investigated in detail. By using the derived analytical relationship between APE and residual RCM, an efficient two-dimensional (2-D) autofocus method is proposed. Experimental results indicate the effectiveness of the proposed method., Comment: 29 pages, 14 figures