Search

As evidenced by recent survey results, majority of asteroids are slow rotators (P>12 h), but lack spin and shape models due to selection bias. This bias is skewing our overall understanding of the spins, shapes, and sizes of asteroids, as well as of their other properties. Also, diameter determinations for large (>60km) and medium-sized asteroids (between 30 and 60 km) often vary by over 30% for multiple reasons. Our long-term project is focused on a few tens of slow rotators with periods of up to 60 hours. We aim to obtain their full light curves and reconstruct their spins and shapes. We also precisely scale the models, typically with an accuracy of a few percent. We used wide sets of dense light curves for spin and shape reconstructions via light-curve inversion. Precisely scaling them with thermal data was not possible here because of poor infrared data: large bodies are too bright for WISE mission. Therefore, we recently launched a campaign among stellar occultation observers, to scale these models and to verify the shape solutions, often allowing us to break the mirror pole ambiguity. The presented scheme resulted in shape models for 16 slow rotators, most of them for the first time. Fitting them to stellar occultations resolved previous inconsistencies in size determinations. For around half of the targets, this fitting also allowed us to identify a clearly preferred pole solution, thus removing the ambiguity inherent to light-curve inversion. We also address the influence of the uncertainty of the shape models on the derived diameters. Overall, our project has already provided reliable models for around 50 slow rotators. Such well-determined and scaled asteroid shapes will, e.g. constitute a solid basis for density determinations when coupled with mass information. Spin and shape models continue to fill the gaps caused by various biases., Comment: Accepted to Astronomy & Astrophysics. 12 pages + appendices

The amount of sparse asteroid photometry being gathered by both space- and ground-based surveys is growing exponentially. This large volume of data poses a computational challenge owing to both the large amount of information to be processed and the new methods needed to combine data from different sources (e.g. obtained by different techniques, in different bands, and having different random and systematic errors). The main goal of this work is to develop an algorithm capable of merging sparse and dense data sets, both relative and differential, in preparation for asteroid observations originating from, for example, Gaia, TESS, ATLAS, LSST, K2, VISTA, and many other sources. We present a novel method to obtain asteroid phase curves by combining sparse photometry and differential ground-based photometry. In the traditional approach, the latter cannot be used for phase curves. Merging those two data types allows for the extraction of phase-curve information for a growing number of objects. Our method is validated for 26 sample asteroids observed by the Gaia mission., Comment: 10 pages, 7 figures (supplementary material: 20 pages, 58 figures)

Results from the TESS mission showed that previous studies strngly underestimated the number of slow rotators, revealing the importance of studying those asteroids. For most slowly rotating asteroids (P > 12), no spin and shape model is available because of observation selection effects. This hampers determination of their thermal parameters and accurate sizes. We continue our campaign in minimising selection effects among main belt asteroids. Our targets are slow rotators with low light-curve amplitudes. The goal is to provide their scaled spin and shape models together with thermal inertia, albedo, and surface roughness to complete the statistics. Rich multi-apparition datasets of dense light curves are supplemented with data from Kepler and TESS. In addition to data in the visible range, we also use thermal data from infrared space observatories (IRAS, Akari and WISE) in a combined optimisation process using the Convex Inversion Thermophysical Model (CITPM). This novel method has so far been applied to only a few targets, and in this work we further validate the method. We present the models of 16 slow rotators. All provide good fits to both thermal and visible data. The obtained sizes are on average accurate at the 5% precision, with diameters in the range from 25 to 145 km. The rotation periods of our targets range from 11 to 59 hours, and the thermal inertia covers a wide range of values, from 2 to <400 SI units, not showing any correlation with the period. With this work we increase the sample of slow rotators with reliable spin and shape models and known thermal inertia by 40%. The thermal inertia values of our sample do not display a previously suggested increasing trend with rotation period, which might be due to their small skin depth., Comment: Accepted to Astronomy & Astrophysics. 10 pages + appendices

Context. Earlier work suggests that slowly rotating asteroids should have higher thermal inertias than faster rotators because the heat wave penetrates deeper into the sub-surface. However, thermal inertias have been determined mainly for fast rotators due to selection effects in the available photometry used to obtain shape models required for thermophysical modelling (TPM). Aims. Our aims are to mitigate these selection effects by producing shape models of slow rotators, to scale them and compute their thermal inertia with TPM, and to verify whether thermal inertia increases with the rotation period. Methods. To decrease the bias against slow rotators, we conducted a photometric observing campaign of main-belt asteroids with periods longer than 12 hours, from multiple stations worldwide, adding in some cases data from WISE and Kepler space telescopes. For spin and shape reconstruction we used the lightcurve inversion method, and to derive thermal inertias we applied a thermophysical model to fit available infrared data from IRAS, AKARI, and WISE. Results. We present new models of 11 slow rotators that provide a good fit to the thermal data. In two cases, the TPM analysis showed a clear preference for one of the two possible mirror solutions. We derived the diameters and albedos of our targets in addition to their thermal inertias, which ranged between 3$^{+33}_{-3}$ and 45$^{+60}_{-30}$ Jm$^{-2}$s$^{-1/2}$K$^{-1}$. Conclusions. Together with our previous work, we have analysed 16 slow rotators from our dense survey with sizes between 30 and 150 km. The current sample thermal inertias vary widely, which does not confirm the earlier suggestion that slower rotators have higher thermal inertias., Comment: Accepted for publication in Astronomy & Astrophysics

We present observations of the ground state 1$_{0,1}$-0$_{0,0}$ rotational transition of HDO at 464.925 GHz and the 1$_{1,0}$-1$_{0,1}$ transition at 509.292 GHz toward the three high-mass star forming regions: G34.26+0.15, W49N, and W51e$_{1}$/e$_{2}$, carried out with the Caltech Submillimeter Observatory. The latter transition is observed for the first time from the ground. The spectra are modeled, together with observations of higher-energy HDO transitions, as well as submillimeter dust continuum fluxes from the literature, using a spherically symmetric radiative transfer model to derive the radial distribution of the HDO abundance in the target sources. The abundance profile is divided into an inner hot core region, with kinetic temperatures higher than 100~K, and a cold outer envelope with lower kinetic temperatures. The derived HDO abundance with respect to H$_2$ is (0.3-3.7)$\times 10^{-8}$ in the hot inner region ($T > 100 \mathrm{K}$) and (7.0-10.0)$\times 10^{-11}$ in the cold outer envelope. We also used two H$_{2}^{18}$O fundamental transitions to constrain the H$_{2}$O abundances in the outer envelopes. The HDO/H$_{2}$O ratios in these cold regions are found to be (1.8-3.1)$\times 10^{-3}$ and are consequently higher than in the hot inner regions of these sources.