Search

Wind speed and direction variations across the rotor affect power production. As utility-scale turbines extend higher into the atmospheric boundary layer (ABL) with larger rotor diameters and hub heights, they increasingly encounter more complex wind speed and direction variations. We assess three models for power production that account for wind speed and direction shear. Two are based on actuator disc representations and the third is a blade element representation. We also evaluate the predictions from a standard power curve model that has no knowledge of wind shear. The predictions from each model, driven by wind profile measurements from a profiling LiDAR, are compared to concurrent power measurements from an adjacent utility-scale wind turbine. In the field measurements of the utility-scale turbine, discrete combinations of speed and direction shear induce changes in power production of -19% to +34% relative to the turbine power curve for a given hub height wind speed. Positive speed shear generally corresponds to over-performance and positive direction shear to under-performance, relative to the power curve. Overall, the blade element model produces both higher correlation and lower error relative to the other models, but its quantitative accuracy depends on induction and controller sub-models. To further assess the influence of complex, non-monotonic wind profiles, we also drive the models with best-fit power law wind speed profiles and linear wind direction profiles. These idealized inputs produce qualitative and quantitative differences in power predictions from each model, demonstrating that time-varying, non-monotonic wind shear affects wind power production., Comment: 28 pages, 14 figures in main body, 1 figure in Appendix A, to be published in Wiley Wind Energy

We have studied the effect of He$^+$ irradiation on the dynamics of chiral domain walls in Pt/Co/AlOx trilayers in the creep regime. The irradiation leads to a strong decrease of the depinning field and a non-monotonous change of the effective pinning barriers. The variations of domain wall dynamics result essentially from the strong decrease of the effective anisotropy constant, which increases the domain wall width. The latter is found to present a perfect scaling with the length-scale of the interaction between domain wall and disorder, $\xi$. On the other hand, the strength of the domain wall-disorder interaction, $f_{pin}$, is weakly impacted by the irradiation, suggesting that the length-scales of the disorder fluctuation remain smaller than the domain wall width., Comment: 5 pages, 3 figures

Magnetization reversal and domain wall dynamics in Pt/Co/AlOx trilayers have been tuned by He+ ion irradiation. Fluences up to 1.5x10$^{15}$ ions/cm$^2$ strongly decrease the perpendicular magnetic anisotropy (PMA), without affecting neither the spontaneous magnetization nor the strength of the Dzyaloshinskii-Moriya interaction (DMI). This confirms the robustness of the DMI interaction against interfacial chemical intermixing, already predicted by theory. In parallel with the decrease of the PMA in the irradiated samples, a strong decrease of the depinning field is observed. This allows the domain walls to reach large maximum velocities with lower magnetic fields with respect to those needed for the pristine films. Decoupling PMA from DMI can therefore be beneficial for the design of low energy devices based on domain wall dynamics. When the samples are irradiated with larger He+ fluences, the magnetization gets close to the out-of-plane/in-plane reorientation transition where 100nm size magnetic skyrmions are stabilized. We observe that as the He+ fluence increases, the skyrmion size decreases while these magnetic textures become more stable against the application of an external magnetic field., Comment: 10 pages, 4 figures

The manipulation of magnetism with a gate voltage is expected to lead the way towards the realization of energy-efficient spintronics devices and high-performance magnetic memories. Exploiting magneto-ionic effects under micro-patterned electrodes in solid-state devices adds the possibility to modify magnetic properties locally, in a non-volatile and reversible way. Tuning magnetic anisotropy, magnetization and Dzyaloshinskii-Moriya interaction allows modifying at will the dynamics of non trivial magnetic textures such as skyrmions and chiral domain walls in magnetic race tracks. In this work, we illustrate efficient magneto-ionic effects in a ferrimagnetic Pt/Co/Tb stack using a ZrO2 thin layer as a solid state ionic conductor. When a thin layer of terbium is deposited on top of cobalt, it acquires a magnetic moment that aligns antiparallel to that of cobalt, reducing the effective magnetization. Below the micro-patterned electrodes, the voltage-driven migration of oxygen ions in a ZrO2 towards the ferrimagnetic stack partially oxidizes the Tb layer, leading to the local variation not only of the spontaneous magnetization, but also of the effective magnetic anisotropy and of the Dzyaloshinskii-Moriya interaction. This leads to a huge increase of the domain wall velocity, which varies from 10 m/s in the pristine state to 250 m/s after gating. This non-volatile and reversible tuning of the domain wall dynamics may lead to applications to reprogrammable magnetic memories or other spintronic devices., Comment: 11 pages, 7 figures

Wind turbines located in wind farms are operated to maximize only their own power production. Individual operation results in wake losses that reduce farm energy. In this study, we operate a wind turbine array collectively to maximize total array production through wake steering. The selection of the farm control strategy relies on the optimization of computationally efficient flow models. We develop a physics-based, data-assisted flow control model to predict the optimal control strategy. In contrast to previous studies, we first design and implement a multi-month field experiment at a utility-scale wind farm to validate the model over a range of control strategies, most of which are suboptimal. The flow control model is able to predict the optimal yaw misalignment angles for the array within +/- 5 degrees for most wind directions (11-32% power gains). Using the validated model, we design a control protocol which increases the energy production of the farm in a second multi-month experiment by 2.7% and 1.0%, for the wind directions of interest and for wind speeds between 6 and 8 m/s and all wind speeds, respectively. The developed and validated predictive model can enable a wider adoption of collective wind farm operation., Comment: 14 pages, 5 figures, 1 table

Despite a decade of research, the precise mechanisms occurring at interfaces underlying the Dzyaloshinskii-Moriya interaction (DMI), and thus the possibility of fine-tuning it, are not yet fully identified. In this study, we investigate the origin of the interfacial DMI, aiming at disentangling how independent are the interfaces around the ferromagnetic layer, and what are their relative contributions to the effective DMI amplitude. For this purpose, we have grown and investigated a large variety of systems with a common structure Pt$|$Co$|M$ with $M =$ Ni, Pd, Ru, Al, Al$|$Ta and MoSi. We explore the correlation between the effective interfacial DMI, and different intrinsic properties of metals, namely atomic number, electronegativity and work function difference at the Co$|M$ interfaces. We find a linear relationship between interfacial DMI and the work function difference between the two elements, hence relating the nature of this behavior to the interfacial potential gradient at the metallic interfaces. The understanding of the DMI mechanism is of utmost importance since it opens up the possibility of precisely engineering the magnetic and hence the spintronic properties for future devices., Comment: 6 pages, 3 Figures, 1 table. Letter

Spin-transfer torque (STT) and spin-orbit torque (SOT) are spintronic phenomena allowing magnetization manipulation using electrical currents. Beyond their fundamental interest, they allow developing new classes of magnetic memories and logic devices, in particular based on domain wall (DW) motion. In this work, we report the study of STT driven DW motion in ferrimagnetic manganese nickel nitride (Mn4-xNixN) films, in which a fine adjustment of the Ni content allows setting the magnetic compensation at room temperature. The reduced magnetization, combined with the large spin polarization of conduction electrons, strongly enhances the STT so that domain wall velocities approaching 3000 m/s can be obtained for Ni compositions close to the compensation point. In addition, a reversal of the domain wall motion direction is observed when the magnetic compensation composition is crossed. This striking feature, related to the change of direction of the spin polarization with respect to that of the net magnetization, is clarified by ab initio band structure calculations., Comment: 24 pages, 4 figures

The intentional yaw misalignment of leading, upwind turbines in a wind farm, termed wake steering, has demonstrated potential as a collective control approach for wind farm power maximization. The optimal control strategy, and resulting effect of wake steering on wind farm power production, are in part dictated by the power degradation of the upwind yaw misaligned wind turbines. In the atmospheric boundary layer, the wind speed and direction may vary significantly over the wind turbine rotor area, depending on atmospheric conditions and stability, resulting in freestream turbine power production which is asymmetric as a function of the direction of yaw misalignment and which varies during the diurnal cycle. In this study, we propose a model for the power production of a wind turbine in yaw misalignment based on aerodynamic blade elements which incorporates the effects of wind speed and direction changes over the turbine rotor area in yaw misalignment. A field experiment is performed using multiple utility-scale wind turbines to characterize the power production of yawed freestream operating turbines depending on the wind conditions, and the model is validated using the experimental data. The resulting power production of a yaw misaligned variable speed wind turbine depends on a nonlinear interaction between the yaw misalignment, the atmospheric conditions, and the wind turbine control system., Comment: 37 pages, 15 figures

The perpendicular magnetic anisotropy at the Co/oxide interface in Pt/Co/MOx (MOx = MgOx, AlOx, TbOx) was modified by an electric field using a 10 nm-thick ZrO2 as a solid electrolyte. The large voltage-driven modification of interfacial magnetic anisotropy and the non-volatility of the effect is explained in terms of the migration of oxygen ions towards/away from the Co/MOx interface. While the effect is reversible in Pt/Co/AlOx and Pt/Co/TbOx, where the Co layer can be oxidised or reduced, in Pt/Co/MgOx the effect has been found to be irreversible. We propose that these differences may be related to the different nature of the ionic conduction within the MOx layers., Comment: Main texte (3 figures) + supplemental Information (3 figures)

On 5 July 2014, an eruptive fissure opened on the eastern flank of Etna volcano (Italy) at ~3.000 m a.s.l. Strombolian activity and lava effusion occurred simultaneously at two neighbouring vents. In the following weeks, eruptive activity led to the build-up of two cones, tens of meters high, here named Crater N and Crater S. To characterize the short-term (days) dynamics of this multi-vent system, we performed a multi-parametric investigation by means of a dense instrumental network. The experimental setup, deployed on July 15-16th at ca. 300 m from the eruption site, comprised two broadband seismometers and three microphones as well as high speed video and thermal cameras. Thermal analyses enabled us to characterize the style of eruptive activity at each vent. In particular, explosive activity at Crater N featured higher thermal amplitudes and a lower explosion frequency than at Crater S. Several episodes of switching between puffing and Strombolian activity were noted at Crater S through both visual observation and thermal data; oppositely, Crater N exhibited a quasi-periodic activity. The quantification of the eruptive style of each vent enabled us to infer the geometry of the eruptive system: a branched conduit, prone to rapid changes of gas flux accommodated at the most inclined conduit (i.e. Crater S). Accordingly, we were able to correctly interpret acoustic data and thereby extend the characterization of this twovent system., Comment: 10 figures