Search

Compared to smooth surfaces, droplet spreading on porous surfaces is more complex and has relevance in many engineering applications. In this work, we investigate the infiltration dynamics of molten sand droplets on structured porous surfaces using the multiphase many-body dissipative particle dynamics (mDPD) method. We carry out three-dimensional simulations with different equilibrium contact angles and surface porosities. The temporal evolution of the radius of the wetted area follows a power law, as in the case of a smooth surface. The infiltration rate on the other hand is dictated by the competition between spreading and capillary inhibition of the pores. Additionally, the temporal evolution of the droplet height and the contact angle on the porous surface is also presented.

Ingestion of sand particles into gas turbine engines has been observed to cause damage to engine components and in some cases leads to catastrophic failure. One such mechanism responsible for engine failure occurs through the deposition of molten particles on the turbine blades in the hot-section of the engine. The deposited material reacts chemically and penetrates the thermal barrier coating (TBC) on the turbines blades eventually damaging them. In this work, we investigate the deposition of sand particles on a solid substrate using two-way coupled Euler-Lagrange simulations. In these simulations, hot gas at 1700 K is issued from a circular inlet at Mach 0.3. Simultaneously, spherical mono-dispersed sand particles, modeled after the Calcia-Magnesia-Alumino-Silicates(CMAS), are injected at a constant mass flow rate of 1 gram per minute. The deposition of these particles on a solid substrate, placed 20 cm away from the inlet along the axial direction, is investigated. Simulations are carried out for three different synthetic sand particles CMAS, AFRL 02 and AFRL 03. The effect of Stokes number on particle properties such as number of particle depositions, rebound velocity and coefficient of restitution are investigated., Comment: 10 pages, 8 figures

Scattering by infinite hexagonal ice prisms is calculated using Maxwell's equations in the discrete dipole approximation for size parameters up to x=400. Birefringence is included in the calculations. Applicability of the geometric optics approximation is investigated. Excellent agreement between wave optics and geometric optics is observed for large size parameter in the outer part of the 22 degree halo feature. For smaller ice crystals halo broadening is predicted, and there is appreciable "spillover" of the halo into shadow scattering angles <22 degrees. Ways to retrieve ice crystal sizes are suggested based on the full width at half-maximum of the halo, the power at <22 deg, and the halo polarization.

DDSCAT 7.3 is an open-source Fortran-90 software package applying the discrete dipole approximation to calculate scattering and absorption of electromagnetic waves by targets with arbitrary geometries and complex refractive index. The targets may be isolated entities (e.g., dust particles), but may also be 1-d or 2-d periodic arrays of "target unit cells", allowing calculation of absorption, scattering, and electric fields around arrays of nanostructures. The theory of the DDA and its implementation in DDSCAT is presented in Draine (1988) and Draine & Flatau (1994), and its extension to periodic structures in Draine & Flatau (2008), and efficient near-field calculations in Flatau & Draine (2012). DDSCAT 7.3 includes support for MPI, OpenMP, and the Intel Math Kernel Library (MKL). DDSCAT supports calculations for a variety of target geometries. Target materials may be both inhomogeneous and anisotropic. It is straightforward for the user to "import" arbitrary target geometries into the code. DDSCAT automatically calculates total cross sections for absorption and scattering and selected elements of the Mueller scattering intensity matrix for user-specified scattering directions. DDSCAT 7.3 can efficiently calculate E and B throughout a user-specified volume containing the target. This User Guide explains how to use DDSCAT 7.3 to carry out electromagnetic scattering calculations, including use of DDPOSTPROCESS, a Fortran-90 code to perform calculations with E and B at user-selected locations near the target. A number of changes have been made since the last release, DDSCAT 7.2 ., Comment: 102 pages, 17 figures. arXiv admin note: substantial text overlap with arXiv:1202.3424, arXiv:1002.1505, arXiv:0809.0337, arXiv:astro-ph/0409262, arXiv:astro-ph/0309069, arXiv:astro-ph/0008151

On March 11, 2013 I talked with Warren Wiscombe about his contributions to scientific computer programming, atmospheric science and radiative transfer. Our conversation is divided into three parts related to light scattering, radiative transfer and his general thoughts about scientific programming. There are some reflections on how radiative transfer parameterizations gradually sneaked in to modern climate and atmospheric Global Circulation Models. Why some software programs such as light scattering code MIEV and DISORT are very successful and why some of them fizzle. We talked about the role of tools in modern science, open source movement, repeatability of scientific results, computer languages, computer programs as objects of arts, and even if programs can be revolutionary.

This manual describes the library of conjugate gradients codes CCGPAK, which solves system of complex linear system of equations. The library is written in FORTRAN90 and is highly portable. The codes are general and provide mechanism for matrix times vector multiplication which is separated from the conjugate gradient iterations itself. It is simple to switch between single and double precisions. All codes follow the same naming conventions.

DDSCAT 7.2 is a freely available open-source Fortran-90 software package applying the discrete dipole approximation (DDA) to calculate scattering and absorption of electromagnetic waves by targets with arbitrary geometries and complex refractive index. The targets may be isolated entities (e.g., dust particles), but may also be 1-d or 2-d periodic arrays of "target unit cells", which can be used to study absorption, scattering, and electric fields around arrays of nanostructures. The DDA approximates the target by an array of polarizable points. The theory of the DDA and its implementation in DDSCAT is presented in Draine (1988) and Draine & Flatau (1994), and its extension to periodic structures in Draine & Flatau (2008). Efficient near-field calculations are enabled following Flatau & Draine (2012). DDSCAT 7.2 allows accurate calculations of electromagnetic scattering from targets with size parameters 2*pi*aeff/lambda < 25 provided the refractive index m is not large compared to unity (|m-1| < 2). DDSCAT 7.2 includes support for MPI, OpenMP, and the Intel Math Kernel Library (MKL). DDSCAT 7.2 supports calculations for a variety of target geometries (e.g., ellipsoids, regular tetrahedra, rectangular solids, finite cylinders, hexagonal prisms, etc.). Target materials may be both inhomogeneous and anisotropic. It is straightforward for the user to import new target geometries into the code. DDSCAT 7.2 calculates total cross sections for absorption and scattering and selected elements of the Mueller scattering intensity matrix for specified orientation of the target relative to the incident wave, and for specified scattering directions. DDSCAT 7.2 calculates E throughout a user-specified rectangular volume containing the target. A Fortran-90 code READNF to read E and P from files created by DDSCAT 7.2 is included in the distribution., Comment: 95 pages. Expanded and updated to conform to latest release, DDSCAT 7.2.1. Complete software package available at http://code.google.com/p/ddscat/

We report on the influence of submerged bubble clouds on the remote sensing properties of water. We show that the optical effect of bubbles on radiative transfer and on the estimate of the ocean color is significant. We present a global map of the volume fraction of air in water derived from daily wind speed data. This map, together with the parameterization of the microphysical properties, shows the possible significance of bubble clouds on the albedo of incoming solar energy, Comment: 17 pages, 6 Postscript figures, see also http://atol.ucsd.edu/~pflatau publications for related papers. Q. J. Roy. Met. Soc. in press 2000

DDSCAT 7.1 is an open-source Fortran-90 software package applying the discrete dipole approximation to calculate scattering and absorption of electromagnetic waves by targets with arbitrary geometries and complex refractive index. The targets may be isolated entities (e.g., dust particles), but may also be 1-d or 2-d periodic arrays of "target unit cells", allowing calculation of absorption, scattering, and electric fields around arrays of nanostructures. The theory of the DDA and its implementation in DDSCAT is presented in Draine (1988) and Draine & Flatau (1994), and its extension to periodic structures (and near-field calculations) in Draine & Flatau (2008). DDSCAT 7.1 includes support for MPI, OpenMP, and the Intel Math Kernel Library (MKL). DDSCAT supports calculations for a variety of target geometries. Target materials may be both inhomogeneous and anisotropic. It is straightforward for the user to "import" arbitrary target geometries into the code. DDSCAT automatically calculates total cross sections for absorption and scattering and selected elements of the Mueller scattering intensity matrix. This User Guide explains how to use DDSCAT 7.1 to carry out electromagnetic scattering calculations. DDfield, a Fortran-90 code to calculate E and B at user-selected locations near the target, is included in the distribution. A number of changes have been made since the last release, DDSCAT 7.0 ., Comment: 83 pages, 11 figures

DDSCAT 7.0 is an open-source Fortran-90 software package applying the discrete dipole approximation to calculate scattering and absorption of electromagnetic waves by targets with arbitrary geometries and complex refractive index. The targets may be isolated entities (e.g., dust particles), but may also be 1-d or 2-d periodic arrays of "target unit cells", allowing calculation of absorption, scattering, and electric fields around arrays of nanostructures. The theory of the DDA and its implementation in DDSCAT is presented in Draine (1988) and Draine & Flatau (1994), and its extension to periodic structures (and near-field calculations) in Draine & Flatau (2008). DDSCAT 7.0 includes support for MPI, OpenMP, and the Intel Math Kernel Library (MKL). DDSCAT supports calculations for a variety of target geometries. Target materials may be both inhomogeneous and anisotropic. It is straightforward for the user to "import" arbitrary target geometries into the code. DDSCAT automatically calculates total cross sections for absorption and scattering and selected elements of the Mueller scattering intensity matrix. This User Guide explains how to use DDSCAT 7.0 to carry out electromagnetic scattering calculations. DDfield, a Fortran-90 code DDfield to calculate E and B at user-selected locations near the target, is included in the distribution., Comment: 78 pages, 10 figures. v4 has some typos corrected, and includes more information for installing DDSCAT on non-Linux platforms. v5 corrects some typos in section 8.8, and updates the citation to Draine & Flatau (2008)

The discrete-dipole approximation (DDA) is a powerful method for calculating absorption and scattering by targets that have sizes smaller than or comparable to the wavelength of the incident radiation. The DDA can be extended to targets that are singly- or doubly-periodic. We generalize the scattering amplitude matrix and the 4 x 4 Mueller matrix to describe scattering by singly- and doubly-periodic targets, and show how these matrices can be calculated using the DDA. The accuracy of DDA calculations using the open-source code DDSCAT is demonstrated by comparison to exact results for infinite cylinders and infinite slabs. A method for using the DDA solution to obtain fields within and near the target is presented, with results shown for infinite slabs., Comment: 19 pages, 7 figures, submitted to J. Opt. Soc. Am. A

DDSCAT 6.1 is a software package which applies the discrete dipole approximation (DDA) to calculate scattering and absorption of electromagnetic waves by targets with arbitrary geometries and complex refractive index. DDSCAT 6.1 allows accurate calculations of electromagnetic scattering from targets with size parameters 2 pi a_eff/lambda < 15 provided the refractive index m is not large compared to unity (|m-1| < 2). DDSCAT 6.1 includes support for MPI and FFTW. We also make available a "plain" distribution of DDSCAT 6.1 that does not include support for MPI, FFTW, or netCDF, but is much simpler to install than the full distribution. The DDSCAT package is written in Fortran and is highly portable. The program supports calculations for a variety of target geometries (e.g., ellipsoids, regular tetrahedra, rectangular solids, finite cylinders, hexagonal prisms, etc.). Target materials may be both inhomogeneous and anisotropic. It is straightforward for the user to import arbitrary target geometries into the code, and relatively straightforward to add new target generation capability to the package. DDSCAT automatically calculates total cross sections for absorption and scattering and selected elements of the Mueller scattering intensity matrix for specified orientation of the target relative to the incident wave, and for specified scattering directions., Comment: 59 pages. Updated to describe new target option CYLCAP, to correct error in formula for linear polarization P of scattered light, and provide more explicit instructions for use of multiple dielectric functions

DDSCAT.6.0 is a freely available software package (http://www.astro.princeton.edu/~draine/DDSCAT.6.0.html) which applies the "discrete dipole approximation" (DDA) to calculate scattering and absorption of electromagnetic waves by targets with arbitrary geometries and complex refractive index. DDSCAT.6.0 allows accurate calculations of electromagnetic scattering from targets with ``size parameters'' 2*pi*a/lambda < 15 provided the refractive index m is not large compared to unity (|m-1| < 1). DDSCAT.6.0 includes the option of using the FFTW (Fastest Fourier Transform in the West) package. DDSCAT.6.0 also includes MPI support, permitting parallel calculations on multiprocessor systems. DDSCAT package is written in Fortran and is highly portable. The program supports calculations for a variety of target geometries (e.g., ellipsoids, regular tetrahedra, rectangular solids, finite cylinders, hexagonal prisms, etc.). Target materials may be both inhomogeneous and anisotropic. It is straightforward for the user to ``import'' arbitrary target geometries into the code, and relatively straightforward to add new target generation capability to the package. DDSCAT automatically calculates total cross sections for absorption and scattering and selected elements of the Mueller scattering intensity matrix for specified orientation of the target relative to the incident wave, and for specified scattering directions. This User Guide explains how to use DDSCAT.6.0 to carry out electromagnetic scattering calculations. CPU and memory requirements are described., Comment: 46 pages, 6 figures

DDSCAT.5a is a freely available software package which applies the "discrete dipole approximation" (DDA) to calculate scattering and absorption of electromagnetic waves by targets with arbitrary geometries and complex refractive index. The DDA approximates the target by an array of polarizable points. DDSCAT.5a requires that these polarizable points be located on a cubic lattice. DDSCAT.5a10 allows accurate calculations of electromagnetic scattering from targets with "size parameters" 2 pi a/lambda < 15 provided the refractive index m is not large compared to unity (|m-1| < 1). The DDSCAT package is written in Fortran and is highly portable. The program supports calculations for a variety of target geometries (e.g., ellipsoids, regular tetrahedra, rectangular solids, finite cylinders, hexagonal prisms, etc.). Target materials may be both inhomogeneous and anisotropic. It is straightforward for the user to import arbitrary target geometries into the code, and relatively straightforward to add new target generation capability to the package. DDSCAT automatically calculates total cross sections for absorption and scattering and selected elements of the Mueller scattering intensity matrix for specified orientation of the target relative to the incident wave, and for specified scattering directions. This User Guide explains how to use DDSCAT.5a10 to carry out EM scattering calculations. CPU and memory requirements are described., Comment: Added more information for non-Unix sites, and new target option PRISM3 (triangular prism). 42 pages, 5 figures

The discrete-dipole approximation (DDA) is a flexible technique for computing scattering and absorption by targets of arbitrary geometry. In this paper we perform systematic study of various non-stationary iterative (conjugate gradient) methods in search for the most efficient one in order to solve the system of equations arising in DDA. We document implementation of these methods in our public domain code DDSCAT.5a

We report that the submerged microbubbles are an efficient source of diffuse radiance and may contribute to a rapid transition to the diffuse asymptotic regime. In this asymptotic regime an average cosine is easily predictable and measurable., Comment: 4 pages, 3 Postscript figures, opex2.sty (enclosed), also available from the Optical Society of America htpp://epubs.osa.org/oearchive/pdf/11948.pdf

A Monte Carlo model was used to study the scattering error of an absorption meter with a divergent light beam and a limited acceptance angle of the receiver. Reflections at both ends of the tube were taken into account. Calculations of the effect of varying optical properties of water, as well as the receiver geometry, were performed. A weighting function showing the scattering error quantitatively as a function of angle was introduced. Some cases of the practical interests are discussed., Comment: 17 pages, 7 Postscript figures, also available from http://atol.ucsd.edu/~pflatau. In Press, Journal of Atmospheric and Oceanic Technology, 2000