Search

Accurate short-term prediction of overhead line (OHL) transmission ampacity can directly affect the efficiency of power system operation and planning. Any overestimation of the dynamic thermal line rating (DTLR) can lead to lifetime degradation and failure of OHLs, safety hazards, etc. This paper presents a secure yet sharp probabilistic prediction model for the hour-ahead forecasting of the DTLR. The security of the proposed DTLR limits the frequency of DTLR prediction exceeding the actual DTLR. The model is based on an augmented deep learning architecture that makes use of a wide range of predictors, including historical climatology data and latent variables obtained during DTLR calculation. Furthermore, by introducing a customized cost function, the deep neural network is trained to consider the DTLR security based on the required probability of exceedance while minimizing deviations of the predicted DTLRs from the actual values. The proposed probabilistic DTLR is developed and verified using recorded experimental data. The simulation results validate the superiority of the proposed DTLR compared to state-of-the-art prediction models using well-known evaluation metrics., Comment: The work is accepted for publication in Journal of Modern Power Systems and Clean Energy

This paper presents lessons learned to date during the Coronavirus Disease 2019 (COVID-19) pandemic from the viewpoint of Saskatchewan power system operations. A load estimation approach is developed to identify how the closures affecting businesses, schools, and other non-critical businesses due to COVID-19 changed the electricity consumption. Furthermore, the impacts of COVID-19 containment measures and re-opening phases on load uncertainty are examined. Changes in CO2 emissions resulting from an increased proportion of renewable energy generation and the change in load pattern are discussed. In addition, the influence of COVID-19 on the balancing authority's power control performance is investigated. Analyses conducted in the paper are based upon data from SaskPower corporation, which is the principal electric utility in Saskatchewan, Canada. Some recommendations for future power system operation and planning are developed.

The short-term reliability evaluation techniques provide a rational approach for risk-informed decision making during power system operation. The existing reliability assessment techniques involve large computational burden and therefore are not directly applicable for short-term reliability evaluation during system operation. To this end, this paper presents a computationally-efficient approach for short-term reliability evaluation of wind-integrated generating systems. The proposed approach makes use of the fixed-effort generalized splitting (FEGS) technique, which is a variant of importance splitting. To realize the implementation of FEGS, a discrete version of component-wise Metropolis-Hastings (MH) algorithm for Markov Chain Monte-Carlo (MCMC) is also presented. Besides, the proposed FEGS approach is extended to take the uncertainties of wind generation and load demand into account. The simulation results indicate that, in comparison to crude Monte-Carlo simulation (CMCS), the proposed approach is able to evaluate short-term reliability indices with a low computational burden. Moreover, further simulation results indicate the impacts of uncertainties of wind generation and load demand on short-term reliability indices.

This paper proposes a novel wide-area control strategy for modulating the active power injections to damp the critical frequency oscillations in power systems, this includes the inter-area oscillations and the transient frequency swing. The proposed method pursues an efficient utilization of the limited power reserve of existing distributed energy resources (DERs) to mitigate these oscillations. This is accomplished by decoupling the damping control actions at different sites using the oscillation signals of the concerned mode as the power commands. A theoretical basis for this decoupled modulating control is provided. Technically, the desired sole modal oscillation signals are filtered out by linearly combining the system-wide frequencies, which is determined by the linear quadratic regulator based sparsity-promoting (LQRSP) technique. With the proposed strategy, the modulation of each active power injection can be effectively engineered considering the response limit and steady-state output capability of the supporting device. The method is validated based on a two-area test system and is further demonstrated based on the New England 39-bus test system.

Compressed air energy storage is suitable for large-scale electrical energy storage, which is important for integrating renewable energy sources into electric power systems. A typical compressed air energy storage plant consists of compressors, expanders, caverns, and a motor/generator set. Current cavern models used for compressed air energy storage are either accurate but highly nonlinear or linear but inaccurate. The application of highly nonlinear cavern models in power system optimization problems renders them computationally challenging to solve. In this regard, an accurate bilinear cavern model for compressed air energy storage is proposed in this paper. The charging and discharging processes in a cavern are divided into several real/virtual states. The first law of thermodynamics and ideal gas law are then utilized to derive a cavern model, i.e., a model for the variation of temperature and pressure in these processes. Thereafter, the heat transfer between the air in the cavern and the cavern wall is considered and integrated into the cavern model. By subsequently eliminating several negligible terms, the cavern model reduces to a bilinear model. The accuracy of the bilinear cavern model is verified via comparison with both an accurate nonlinear model and two sets of field-measured data. The bilinear cavern model can be easily linearized and is then suitable for integration into optimization problems considering compressed air energy storage. This is verified via comparatively solving a self-scheduling problem of compressed air energy storage using different cavern models., Comment: 18 pages, 15 figures, accepted by Applied Energy on March 2019. arXiv admin note: substantial text overlap with arXiv:1709.08272

The data collected by smart meters contain a lot of useful information. One potential use of the data is to track the energy consumptions and operating statuses of major home appliances.The results will enable homeowners to make sound decisions on how to save energy and how to participate in demand response programs. This paper presents a new method to breakdown the total power demand measured by a smart meter to those used by individual appliances. A unique feature of the proposed method is that it utilizes diverse signatures associated with the entire operating window of an appliance for identification. As a result, appliances with complicated middle process can be tracked. A novel appliance registration device and scheme is also proposed to automate the creation of appliance signature database and to eliminate the need of massive training before identification. The software and system have been developed and deployed to real houses in order to verify the proposed method., Comment: 10 pages, 10 figures

Compressed air energy storage (CAES) is suitable for large-scale energy storage and can help to increase the penetration of wind power in power systems. A CAES plant consists of compressors, expanders, caverns, and a motor/generator set. Currently used cavern models for CAES are either accurate but highly non-linear or linear but inaccurate. Highly non-linear cavern models cannot be directly utilized in power system optimization problems. In this regard, an accurate bi-linear cavern model for CAES is proposed in this first paper of a two-part series. The charging and discharging processes in a cavern are divided into several virtual states and then the first law of thermodynamics and ideal gas law are used to derive a cavern model, i.e., model for the variation of temperature and pressure in these processes. Thereafter, the heat transfer between the air in the cavern and the cavern wall is considered and integrated into the cavern model. By subsequently eliminating several negligible terms, the cavern model reduces to a bi-linear (linear) model for CAES with multiple (single) time steps. The accuracy of the proposed cavern model is verified via comparison with an accurate non-linear model.

Unit commitment (UC) is one of the most important power system operation problems. To integrate higher penetration of wind power into power systems, more compressed air energy storage (CAES) plants are being built. Existing cavern models for the CAES used in power system optimization problems are not accurate, which may lead to infeasible solutions, e.g., the air pressure in the cavern is outside its operating range. In this regard, an accurate CAES model is proposed for the UC problem based on the accurate bi-linear cavern model proposed in the first paper of this two-part series. The minimum switch time between the charging and discharging processes of CAES is considered. The whole model, i.e., the UC model with an accurate CAES model, is a large-scale mixed integer bi-linear programming problem. To reduce the complexity of the whole model, three strategies are proposed to reduce the number of bi-linear terms without sacrificing accuracy. McCormick relaxation and piecewise linearization are then used to linearize the whole model. To decrease the solution time, a method to obtain an initial solution of the linearized model is proposed. A modified RTS-79 system is used to verify the effectiveness of the whole model and the solution methodology., Comment: 8 pages, 6 figures

With the increase in awareness about the climate change, there has been a tremendous shift towards utilizing renewable energy sources (RES). In this regard, smart grid technologies have been presented to facilitate higher penetration of RES. Microgrids are the key components of the smart grids. Microgrids allow integration of various distributed energy resources (DER) such as the distributed generation (DGs) and energy storage systems (ESSs) into the distribution system and hence remove or delay the need for distribution expansion. One of the crucial requirements for utilities is to ensure that the system reliability is maintained with the inclusion of microgrid topology. Therefore, this paper evaluates the reliability of a microgrid containing prioritized loads and distributed RES through a hybrid analytical-simulation method. The stochasticity of RES introduces complexity to the reliability evaluation. The method takes into account the variability of RES through Monte- Carlo state sampling simulation. The results indicate the reliability enhancement of the overall system in the presence of the microgrid topology. In particular, the highest priority load has the largest improvement in the reliability indices. Furthermore, sensitivity analysis is performed to understand the effects of the failure of microgrid islanding in the case of a fault in the upstream network.