Search

Nitrogen-vacancy centers in diamond allow measurement of environment properties such as temperature, magnetic and electric fields at nanoscale level, of utmost relevance for several research fields, ranging from nanotechnologies to bio-sensing. The working principle is based on the measurement of the resonance frequency shift of a single nitrogen-vacancy center (or an ensemble of them), usually detected by by monitoring the center photoluminescence emission intensity. Albeit several schemes have already been proposed, the search for the simplest and most effective one is of key relevance for real applications. Here we present a new continuous-wave lock-in based technique able to reach unprecedented sensitivity in temperature measurement at micro/nanoscale volumes (4.8 mK/Hz$^{1/2}$ in $\mu$m$^3$). Furthermore, the present method has the advantage of being insensitive to the enviromental magnetic noise, that in general introduces a bias in the temperature measurement.

Single-photon sources are set to be a fundamental tool for metrological applications as well as for quantum information related technologies. Because of their upcoming widespread dissemination, the need for their characterization and standardization is becoming of the utmost relevance. Here, we illustrate a strategy to provide a quantitative estimate of the multi-photon component of a single-photon source, showing the results achieved in a pilot study for the measurement of the second order autocorrelation function $g^{(2)}$ of a low-noise CW heralded single-photon source prototype (operating at telecom wavelength $\lambda=1550$ nm) realized in INRiM. The results of this pilot study, involving PTB, NPL and INRiM, will help to build up a robust and unambiguous procedure for the characterization of the emission of a single-photon source.

This work reports on the pilot study, performed by INRIM, NPL and PTB, on the measurement of the g^(2)(0) parameter in the visible spectral range of a test single-photon source based on a colour centre in diamond. The development of single-photon sources is of great interest to the metrology community as well as the burgeoning quantum technologies industry. Measurement of the g^(2)(0) parameter plays a vital role in characterising and understanding single-photon emission. This comparison has been conducted by each partner individually using its own equipment at INRIM laboratories, which were responsible for the operation of the source

The fabrication of luminescent defects in single-crystal diamond upon Sn implantation and annealing is reported. The relevant spectral features of the optical centers (emission peaks at 593.5 nm, 620.3 nm, 630.7 nm and 646.7 nm) are attributed to Sn-related defects through the correlation of their photoluminescence (PL) intensity with the implantation fluence. Single Sn-related defects were identified and characterized through the acquisition of their second-order auto-correlation emission functions, by means of Hanbury-Brown-Twiss interferometry. The investigation of their single-photon emission regime as a function of excitation laser power revealed that Sn-related defects are based on three-level systems with a 6 ns radiative decay lifetime. In a fraction of the studied centers, the observation of a blinking PL emission is indicative of the existence of a dark state. Furthermore, absorption dependence from the polarization of the excitation radiation with about 45 percent contrast was measured. This work shed light on the existence of a new optical center associated with a group-IV impurity in diamond, with similar photo-physical properties to the already well-known Si-V and Ge-V emitters, thus providing results of interest from both the fundamental and applicative points of view., Comment: 10 pages, 4 figures

Quantum mechanics, one of the keystones of modern physics, exhibits several peculiar properties, differentiating it from classical mechanics. One of the most intriguing is that variables might not have definite values. A complete quantum description provides only probabilities for obtaining various eigenvalues of a quantum variable. These and corresponding probabilities specify the expectation value of a physical observable, which is known to be a statistical property of an ensemble of quantum systems. In contrast to this paradigm, we demonstrate a unique method allowing to measure the expectation value of a physical variable on a single particle, namely, the polarisation of a single protected photon. This is the first realisation of quantum protective measurements., Comment: Nature Physics, in press (this version corresponds to the one initially submitted to Nature Physics)

In this work we experimentally demonstrate for the first time a recently proposed criterion adressed to detect nonclassical behavior in the fluorescence emission of ensembles of single-photon emitters. In particular, we apply the method to study clusters of NV centres in diamond observed via single-photon-sensitive confocal microscopy. Theoretical considerations on the behavior of the parameter at any arbitrary order in presence of poissonian noise are presented and, finally, the opportunity of detecting manifold coincidences is discussed.

Single-photon sources represent a key enabling technology in quantum optics, and single colour centres in diamond are a promising platform to serve this purpose, due to their high quantum efficiency and photostability at room temperature. The widely studied nitrogen vacancy centres are characterized by several limitations, thus other defects have recently been considered, with a specific focus of centres emitting in the Near Infra-Red. In the present work, we report on the coupling of native near-infrared-emitting centres in high-quality single crystal diamond with Solid Immersion Lens structures fabricated by Focused Ion Beam lithography. The reported improvements in terms of light collection efficiency make the proposed system an ideal platform for the development of single-photon emitters with appealing photophysical and spectral properties., Comment: 17 pages, 5 figures

Single photon avalanche diodes (SPADs) are the most commercially diffused solution for single-photon counting in quantum key distribution (QKD) applications. However, the secondary photon emission, arising from the avalanche of charge carriers during a photon detection, may be exploited by an eavesdropper to gain information without forcing errors in the transmission key. In this paper, we characterise such backflash light in gated InGaAs/InP SPADs, and its spectral and temporal characterization for different detector models and different operating parameters. We qualitatively bound the maximum information leakage due to backflash light, and propose a solution.

The calibration of a quantum channel, i.e. the determination of the transmission losses affecting it, is definitely one of the principal objectives in both the quantum communication and quantum metrology frameworks. Another task of the utmost relevance is the identification, e.g. by extracting its photon number distribution, of the noise potentially present in the channel. Here we present a protocol, based on the response of a photon-number-resolving detector at different quantum efficiencies, able to accomplish both of these tasks at once, providing with a single measurement an estimate of the transmission losses as well as the photon statistics of the noise present in the exploited quantum channel. We show and discuss the experimental results obtained in the practical implementation of such protocol, with different kinds and levels of noise., Comment: 6 pages, 4 figures

Weak value measurements have recently given rise to a large interest for both the possibility of measurement amplification and the chance of further quantum mechanics foundations investigation. In particular, a question emerged about weak values being proof of the incompatibility between Quantum Mechanics and Non-Contextual Hidden Variables Theories (NCHVT). A test to provide a conclusive answer to this question was given in [M. Pusey, Phys. Rev. Lett. 113, 200401 (2014)], where a theorem was derived showing the NCHVT incompatibility with the observation of anomalous weak values under specific conditions. In this paper we realize this proposal, clearly pointing out the strict connection between weak values and the contextual nature of Quantum Mechanics., Comment: 5 pages, 4 figures

One of the most intriguing aspects of Quantum Mechanics is the impossibility of measuring at the same time observables corresponding to non-commuting operators. This impossibility can be partially relaxed when considering joint or sequential weak values evaluation. Indeed, weak measurements have been a real breakthrough in the quantum measurement framework that is of the utmost interest from both a fundamental and an applicative point of view. Here we show how we realized, for the first time, a sequential weak value evaluation of two incompatible observables on a single photon., Comment: 5 pages, 3 figures

We show how a property of dualism, which can exist in the entanglement of identical particles, can be tested in the usual photonic Bell measurement apparatus with minor modifications. Two different sets of coincidence measurements on the same experimental setup consisting of a Hong-Ou-Mandel interferometer demonstrate how the same two-photon state can emerge entanglement in the polarization or the momentum degree of freedom depending on the dynamical variables used for labeling the particles. Our experiment demonstrates how the same source can be used as both a polarization entangled state, as well as a dichotomic momentum entangled state shared between distant users Alice and Bob in accordance to which sets of detectors they access. When the particles become distinguishable by letting the information about one of the variables to be imprinted in yet another (possibly inaccessible) system or degree of freedom, the feature of dualism is expected to vanish. We verify this feature by polarization decoherence (polarization information in environment) or arrival time difference, which both respectively destroy one of the dual forms of entanglement., Comment: 5 pages, 4 figures

The "problem of time" in present physics substantially consists in the fact that a straightforward quantization of the general relativistic evolution equation and constraints generates for the Universe wave function the Wheeler-De Witt equation, which describes a static Universe. Page and Wootters considered the fact that there exist states of a system composed by entangled subsystems that are stationary, but one can interpret the component subsystems as evolving: this leads them to suppose that the global state of the universe can be envisaged as one of this static entangled state, whereas the state of the subsystems can evolve. Here we synthetically present an experiment, based on PDC polarization entangled photons, that allows showing with a practical example a situation where this idea works, i.e. a subsystem of an entangled state works as a "clock" of another subsystem.

Here we present a reconstruction of the Positive Operator-Value Measurement of a photon-number-resolving detector comprised of three 50:50 beamsplitters in a tree configuration, terminated with four single-photon avalanche detectors. The four detectors' outputs are processed by an electronic board that discriminates detected photon number states from 0 to 4 and implements a "smart counting" routine to compensate for dead time issues at high count rates.

Focused MeV ion beams with micrometric resolution are suitable tools for the direct writing of conductive graphitic channels buried in an insulating diamond bulk. Their effectiveness has been shown for the fabrication of multi-electrode ionizing radiation detectors and cellular biosensors. In this work we investigate such fabrication method for the electrical excitation of color centers in diamond. Differently from optically-stimulated light emission from color centers in diamond, electroluminescence (EL) requires a high current flowing in the diamond subgap states between the electrodes. With this purpose, buried graphitic electrode pairs with a spacing of 10 $\mu$m were fabricated in the bulk of a single-crystal diamond sample using a 6 MeV C microbeam. The electrical characterization of the structure showed a significant current above an effective voltage threshold of 150V, which was interpreted according to the theory of Space Charge Limited Current. The EL imaging allowed to identify the electroluminescent regions and the residual vacancy distribution associated with the fabrication technique. Measurements evidenced bright electroluminescent emission from native neutrally-charged nitrogen-vacancy centers ($NV^0$); the acquired spectra highlighted the absence of EL associated with radiation damage., Comment: This article has been withdrawn due to the inclusion of additional upgrades and modifications, which significantly improve the paper. A new submission will be performed at a later stage

Focused MeV ion microbeams are suitable tools for the direct writing of conductive graphitic channels buried in an insulating diamond bulk, as demonstrated in previous works with the fabrication of multi-electrode ionizing radiation detectors and cellular biosensors. In this work we investigate the suitability of the fabrication method for the electrical excitation of colour centres in diamond. Differently from photoluminescence, electroluminescence requires an electrical current flowing through the diamond sub-gap states for the excitation of the colour centres. With this purpose, buried graphitic electrodes with a spacing of 10 micrometers were fabricated in the bulk of a detector-grade CVD single-crystal diamond sample using a scanning 1.8 MeV He micro-beam. The current flowing in the gap region between the electrodes upon the application of a 250 V bias voltage was exploited as the excitation pump for the electroluminescence of different types of colour centres localized in the above-mentioned gap. The bright light emission was spatially mapped using a confocal optical microscopy setup. The spectral analysis of electroluminescence revealed the emission from neutrally-charged nitrogen-vacancy centres ($NV^0$, $\lambda_{ZPL}$ = 575 nm), as well as from cluster crystal dislocations (A-band, {\lambda} = 400-500 nm). Moreover, an electroluminescence signal with appealing spectral features (sharp emission at room temperature, low phonon sidebands) from He-related defects was detected ($\lambda_{ZPL}$ = 536.3 nm, $\lambda_{ZPL}$ = 560.5 nm); a low and broad peak around {\lambda} = 740 nm was also observed and tentatively ascribed to Si-V or GR1 centres. These results pose interesting future perspectives for the fabrication of electrically-stimulated single-photon emitters in diamond for applications in quantum optics and quantum cryptography.

We experimentally demonstrate quantum enhanced resolution in confocal fluorescence microscopy exploiting the non-classical photon statistics of single nitrogen-vacancy colour centres in diamond. By developing a general model of super-resolution based on the direct sampling of the kth-order autocorrelation function of the photoluminescence signal, we show the possibility, in some cases, to resolve in principle arbitrarily close emitting centers.

We report on the absolute calibration of a CCD camera by exploiting quantum correlation. This novel method exploits a certain number of spatial pairwise quantum correlated modes produced by spontaneous parametric-down-conversion. We develop a measurement model taking into account all the possible source of losses and noise that are not related to the quantum efficiency,accounting for all the uncertainty contributions, and we reach the relative uncertainty of 0.3% in low photon flux regime. This represents a significant step forward for the characterizaion of (scientific) CCDs used in mesoscopic light regime.

Single-photon sources are a fundamental element for developing quantum technologies, and sources based on colour centres in diamonds are among the most promising candidates. The well-known NV centres are characterized by several limitations, thus few other defects have recently been considered. In the present work, we characterize in detail native efficient single colour centres emitting in the near infra-red in both standard IIa single-crystal and electronic-grade polycrystalline commercial CVD diamond samples. In the former case, a high-temperature annealing process in vacuum is necessary to induce the formation/activation of luminescent centres with good emission properties, while in the latter case the annealing process has marginal beneficial effects on the number and performances of native centres in commercially available samples. Although displaying significant variability in several photo physical properties (emission wavelength, emission rate instabilities, saturation behaviours), these centres generally display appealing photophysical properties for applications as single photon sources: short lifetimes, high emission rates and strongly polarized light. The native centres are tentatively attributed to impurities incorporated in the diamond crystal during the CVD growth of high-quality type IIa samples, and offer promising perspectives in diamond-based photonics., Comment: 27 pages, 10 figures. Submitted to "New Journal of Phsyics", NJP-100003.R2

In the last years the exploitation of specific properties of quantum states has disclosed the possibility of realising tasks beyond classical limits, creating the new field of quantum technologies [1, 2, 3, 4, 5, 6, 7, 8, 9]. Among them, quantum metrology and imaging aim to improve the sensitivity and/or resolution of measurements exploiting non-classical features such as squeezing and quantum correlations (entanglement and discordant states) [10, 11, 12, 13, 14]. Nevertheless, in most of the realistic scenarios losses and noise are known to nullify the advantage of adopting quantum strategies [15]. In this paper we describe in detail the first experimental realization of quantum illumination protocol aimed to target detection in a noisy environment, that preserves a strong advantage over the classical counterparts even in presence of large amount of noise and losses. The experiment, inspired by the theoretical ideas elaborated in [16, 17, 18, 19] (see also [20, 21]), has been performed exploiting only photon number correlations in twin beams. Thus, for its simplicity it can find widespread use. Even more important by challenging the common believe that real application of quantum technologies is limited by their fragility to noise and losses, it paves the way to their real application., Comment: arXiv admin note: substantial text overlap with arXiv:1303.4304

This paper's purpose is to review the results recently obtained in the Quantum Optics labs of the National Institute of Metrological Research (INRIM) in the field of single- and few-photon detectors calibration, from both the classical and quantum viewpoint. In the first part of the paper is presented the calibration of a single-photon detector with absolute methods, while in the second part we focus on photon-number-resolving detectors, discussing both the classical and quantum characterization of such devices., Comment: Quantum Matter in press

We present the first experimental realisation of the quantum illumination protocol proposed in Ref.s [S. Lloyd, Science 321, 1463 (2008); S. Tan et al., Phys. Rev. Lett. 101, 253601 (2008)], achieved in a simple feasible experimental scheme based on photon-number correlations. A main achievement of our result is the demonstration of a strong robustness of the quantum protocol to noise and losses, that challenges some widespread wisdom about quantum technologies., Comment: PRL in press

Low noise single-photon sources are a critical element for quantum technologies. We present a heralded single-photon source with an extremely low level of residual background photons, by implementing low-jitter detectors and electronics and a fast custom-made pulse generator controlling an optical shutter (a LiNbO3 waveguide optical switch) on the output of the source. This source has a second-order autocorrelation g^{(2)}(0)=0.005(7), and an "Output Noise Factor" (defined as the ratio of the number of noise photons to total photons at the source output channel) of 0.25(1)%. These are the best performance characteristics reported to date.

In recent years Quantum Key Distribution (QKD) has emerged as the most paradigmatic example of Quantum technology allowing the realization of intrinsically secure communication links over hundreds of kilometers. Beyond its commercial interest QKD also has high conceptual relevance in the study of quantum information theory and the foundations of quantum mechanics. In particular, the discussion on the minimal resources needed in order to obtain absolutely secure quantum communication is yet to be concluded. Here we present an overview on our last experimental results concerning two novel quantum cryptographic schemes which do not require some of the most widely accepted conditions for realizing QKD. The first is Goldenberg-Vaidman protocol \cite{v}, in which even if only orthogonal states (that in general can be cloned without altering the state) are used, any eavesdropping attempt is detectable. The second is N09 protocol \cite{no} which, being based on the quantum counterfactual effect, does not even require any actual photon transmission in the quantum channel between the parties for the communication.

A quantum measurement can be described by a set of matrices, one for each possible outcome, which represents the positive operator-valued measure (POVM) of the sensor. Efficient protocols of POVM extraction for arbitrary sensors are required. We present the first experimental POVM reconstruction that takes explicit advantage of a quantum resource, i.e., nonclassical correlations with an ancillary state. A POVM of a photon-number-resolving detector is reconstructed by using strong quantum correlations of twin beams generated by parametric down-conversion. Our reconstruction method is more statistically robust than POVM reconstruction methods that use classical input states., Comment: 5 pages, 4 figures, close to published version

In general, a pair of uncorrelated Gaussian states mixed in a beam splitter produces a correlated state at the output. However, when the inputs are identical Gaussian states the output state is equal to the input, and no correlations appear, as the interference had not taken place. On the other hand, since physical phenomena do have observable effects, and the beam splitter is there, a question arises on how to reveal the interference between the two beams. We prove theoretically and demonstrate experimentally that this is possible if at least one of the two beams is prepared in a discordant, i.e. Gaussian correlated, state with a third beam. We also apply the same technique to reveal the erasure of polarization information. Our experiments involves thermal states and the results show that Gaussian discordant states, even when they show a positive Glauber P-function, may be useful to achieve specific tasks., Comment: published version

Well characterized photon number resolving detectors are a requirement for many applications ranging from quantum information and quantum metrology to the foundations of quantum mechanics. This prompts the necessity for reliable calibration techniques at the single photon level. In this paper we propose an innovative absolute calibration technique for photon number resolving detectors, using a pulsed heralded photon source based on parametric down conversion. The technique, being absolute, does not require reference standards and is independent upon the performances of the heralding detector. The method provides the results of quantum efficiency for the heralded detector as a function of detected photon numbers. Furthermore, we prove its validity by performing the calibration of a Transition Edge Sensor based detector, a real photon number resolving detector that has recently demonstrated its effectiveness in various quantum information protocols., Comment: 9 pages, 2 figures

We present a complete methodology for testing the performances of quantum tomography protocols. The theory is validated by several numerical examples and by the comparison with experimental results achieved with various protocols for whole families of polarization states of qubits and ququaters including pure, mixed, entangled and separable., Comment: 20 pages, 20 figures

We present a complete and exhaustive theory of signal-to-noise-ratio in bipartite ghost imaging with classical (thermal) and quantum (twin beams) light. The theory is compared with experiment for both twin beams and thermal light in a certain regime of interest.

We address the experimental determination of entanglement for systems made of a pair of polarization qubits. We exploit quantum estimation theory to derive optimal estimators, which are then implemented to achieve ultimate bound to precision. In particular, we present a set of experiments aimed at measuring the amount of entanglement for states belonging to different families of pure and mixed two-qubit two-photon states. Our scheme is based on visibility measurements of quantum correlations and achieves the ultimate precision allowed by quantum mechanics in the limit of Poissonian distribution of coincidence counts. Although optimal estimation of entanglement does not require the full tomography of the states we have also performed state reconstruction using two different sets of tomographic projectors and explicitly shown that they provide a less precise determination of entanglement. The use of optimal estimators also allows us to compare and statistically assess the different noise models used to describe decoherence effects occuring in the generation of entanglement., Comment: revised version, 10 pages

Recently it has been suggested that an enhancement in the visibility of ghost images obtained with thermal light can be achieved exploiting higher order correlations [3]. This paper reports on the status of an higher order ghost imaging experiment carried on at INRIM labs exploiting a pseudo-thermal source and a CCD camera., Comment: To be published in Proceedings of Recent advances in Foundations of Quantum Mechanics and Quantum Information

We present a heralded single-photon source with a much lower level of unwanted background photons in the output channel by using the herald photon to control a shutter in the heralded channel. The shutter is implemented using a simple field programable gate array controlled optical switch., Comment: 4 pages, 5 figures

Properties of quantum states have disclosed new technologies, ranging from quantum information to quantum metrology. Among them a recent research field is quantum imaging, addressed to overcome limits of classical imaging by exploiting spatial properties of quantum states of light . In particular quantum correlations between twin beams represent a fundamental resource for these studies. One of the most interesting proposed scheme exploits spatial quantum correlations between parametric down conversion light beams for realizing sub-shot-noise imaging of the weak absorbing objects, leading ideally to a noise-free imaging. Here we present the first experimental realisation of this scheme, showing its capability to reach a larger signal to noise ratio (SNR) with respect to classical imaging methods. This work represents the starting point of this quantum technology that can have relevant applications, especially whenever there is a need of a low photon flux illumination (e.g. as with certain biological samples).

Generation of two-photon wavepackets, produced by spontaneous parametric down conversion in crystals with linearly chirped quasi-phase matching grating, is analyzed. Although being spectrally broad, two-photon wavepackets produced this way are not Fourier transform limited. In the paper we discuss the temporal compression of the wavepackets, exploiting the insertion of a standard optical fiber in the path of one of the two photons. The effect is analyzed by means of full numerical calculation and the exact dispersion dependencies in both the crystal and the fiber are considered. The study opens the way to the practical realization of this idea., Comment: 10 pages, 16 figures

A novel operational method for estimating the efficiency of quantum state tomography protocols is suggested. It is based on a-priori estimation of the quality of an arbitrary protocol by means of universal asymptotic fidelity distribution and condition number, which takes minimal value for better protocol. We prove the adequacy of the method both with numerical modeling and through the experimental realization of several practically important protocols of quantum state tomography.

We test two-dimensional TPSA of biphoton light emitted via ultrafast spontaneous parametric down-conversion (SPDC) using the effect of group-velocity dispersion in optical fibres. Further, we apply this technique to demonstrate the engineering of biphoton spectral properties by acting on the pump pulse shape.

With the purpose to introduce a useful tool for researches concerning foundations of quantum mechanics and applications to quantum technologies, here we study three quantumness quantifiers for bipartite optical systems: one based on sub-shot-noise correlations, one related to antibunching and one springing from entanglement determination. The specific cases of parametric down conversion seeded by thermal, coherent and squeezed states are discussed in detail.

We verified operational approach based on direct measurement of entanglement degree for bipartite systems. In particular spectral distributions of single counts and coincidence for pure biphoton states generated by train of short pump pulses have been measured and entanglement quantifier calculated. The approach gives upper bound of entanglement stored in total biphoton states, which can reach extremely high value up to $10^{4}-10^{5}$.

We demonstrate a state reconstruction technique which provides either the Wigner function or the density matrix of a field mode and requires only avalanche photodetectors, without any phase or amplitude discrimination power. It represents an alternative, of simpler implementation, to quantum homodyne tomography., Comment: 6 pages, 4 figures, revised and enlarged version

The knowledge of the density matrix of a quantum state plays a fundamental role in several fields ranging from quantum information processing to experiments on foundations of quantum mechanics and quantum optics. Recently, a method has been suggested and implemented in order to obtain the reconstruction of the diagonal elements of the density matrix exploiting the information achievable with realistic on/off detectors, e.g. silicon avalanche photo-diodes, only able to discriminate the presence or the absence of light. The purpose of this paper is to provide an overview of the theoretical and experimental developments of the on/off method, including its extension to the reconstruction of the whole density matrix., Comment: revised version, 11 pages, 6 figures, to appear as a review paper on Adv. Science Lett

Speckle structure of parametric down conversion light has recently received a large attention due to relevance in view of applications to quantum imaging The possibility of tailoring the speckle size by acting on the pump properties is an interesting tool for the applications to quantum imaging and in particular to the detection of weak object under shot-noise limit. Here we present a systematic detailed experimental study of the speckle structure produced in type II PDC with particular attention to its variation with pump beam properties.

In a recent paper [R. Alicki and N. Van Ryn, J. Phys. A: Math. Theor., 41, 062001 (2008)] a test of nonclassicality for a single qubit was proposed. Here, we discuss the class of local realistic theories to which this test applies and present an experimental realization.

Sub shot noise imaging of weak object by exploiting Parametric Down Converted light represents a very interesting technological development. A precise characterization of PDC speckle structure in dependence of pump beam parameters is a fundamental tool for this application. In this paper we present a first set of data addressed to this purpose.

We address the reconstruction of the full photon distribution of multimode fields generated by seeded parametric down-conversion (PDC). Our scheme is based on on/off avalanche photodetection assisted by maximum-likelihood (MaxLik) estimation and does not involve photon counting. We present a novel constrained MaxLik method that incorporates the request of finite energy to improve the rate of convergence and, in turn, the overall accuracy of the reconstruction.

Spontaneous parametric down conversion has been largely exploited as a tool for absolute calibration of photon counting detectors, photomultiplier tubes or avalanche photodiodes working in Geiger regime. In this work we investigate the extension of this technique from very low photon flux of photon counting regime to the absolute calibration of analog photodetectors at higher photon flux. Moving toward higher photon rate, i.e. at high gain regime, with the spontaneous parametric down conversion shows intrinsic limitations of the method, while the stimulated parametric down conversion process, where a seed beam properly injected into the crystal in order to increase the photon generation rate in the conjugate arm, allows us to work around this problem. A preliminary uncertainty budget is discussed.

In this paper, the authors compare the security bounds for different quantum communication protocols with the numerically evaluated losses in the transmission channel, due to the interaction between the atmosphere and the photon, which is the information carrier. The analysis is carried out using a free-source library, which can solve the radiative transfer equation for a parallel-plane atmosphere.

We study the frequency-angular lineshape for a phase-matched nonlinear process producing entangled states and show that there is a continuous variety of maximally-entangled states generated for different mismatch values within the natural bandwidth. Detailed considerations are made for two specific methods of polarization entanglement preparation, based on type-II spontaneous parametric down-conversion (SPDC) and on SPDC in two subsequent type-I crystals producing orthogonally polarized photon pairs. It turns out that different Bell states are produced at the center of the SPDC line and on its slopes, corresponding to about half-maximum intensity level. These Bell states can be filtered out by either frequency selection or angular selection, or both. Our theoretical calculations are confirmed by a series of experiments, performed for the two above-mentioned schemes of producing polarization-entangled photon pairs and with two kinds of measurements: frequency-selective and angular-selective., Comment: submitted for publication

In this paper we present some recent work performed at "Carlo Novero" lab on Quantum Information and Foundations of Quantum Mechanics., Comment: Contribution to III international workshop "Recent advances in Foundations of Quantum Mechanics and Quantum Information. In memory of Carlo Novero"

Following the theoretical suggestion of Ref. [1,2], we present experimental results addressed to test restricted families of local realistic models, but without relying on the fair sampling assumption.

It is shown, theoretically and experimentally, that at any type-II spontaneous parametric down-conversion (SPDC) phase matching, the decoherence-free singlet Bell state is always present within the natural bandwidth and can be filtered out by a proper spectral selection. Instead of the frequency selection, one can perform time selection of the two-photon time amplitude at the output of a dispersive fibre. Applications to quantum communication are outlined., Comment: submitted for publication