Search

The microwave properties of polycrystalline MgB2 thin films prepared by the so-called in-situ method are investigated. The characterization of the films at microwave frequencies was obtained by a coplanar resonator technique. The analysis of the experimental data results in the determination of penetration depth, surface impedance and complex conductivity. The aim of this work is to set the experimental results in a consistent framework, involving the two-band model in the presence of impurity scattering. The energy gaps are calculated and the contribution of intra- and inter-band scattering is considered. From the comparison between the calculated gap values and the experimental data it turns out that the temperature dependence of the penetration depth can be accounted for by an effective mean energy gap, in agreement with the predictions of Kogan et al. [Phys. Rev. B 69, 132506 (2004)]. On the other hand, the temperature dependence of the real part of the microwave conductivity and of the surface resistance is accounted for by the single smaller gap, in agreement with the work of Jin et al. [Phys. Rev. Lett. 91, 127006 (2003)]. Since these findings rely on the same calculated gap structure, the required consistency is fulfilled., Comment: 24 pages, 9 figures. Phys. Rev. B, in press

The paper reports on a high precision equipment designed to modify over 3-dimensions (3D) by means of high-energy gold ions the local properties of thin and thick films. A target-moving system aimed at creating patterns across the volume is driven by an x-y writing protocol that allows one to modify beam sensitive samples over micrometer-size regions of whatever shape. The apparatus has a mechanical resolution of 15 nm. The issue of the local fluence measurement has been particularly addressed. The setup has been checked by means of different geometries patterned on beam sensitive sheets as well as on superconducting materials. In the last case the 3D modification consists of amorphous nanostructures. The nanostructures create zones with different dissipative properties with respect to the virgin regions. The main analysis method consists of magneto-optical imaging that provides local information on the electrodynamics of the modified zones. Features typical of non-linear current flow hint at which pattern geometry is more functional to applications in the framework of nanostructures across superconducting films., Comment: 7 pages

We created local pinning modulations in YBCO films by means of confined high energy heavy ion irradiation. The high energy of the ions allows us to introduce nanometric size defects with a well defined anisotropy. The dose was chosen in such a way to reduce the local critical current of the irradiated area. We used a quantitative magneto-optical analysis to measure the magnetic field vector and the supercurrent for each point of the whole sample surface. The basic geometry of a rectangular region inside strip-shaped samples was considered in order to investigate in detail the effect of the orientation of planar boundaries with respect to the supercurrent flow direction. Here we present the two complementary orientations of the modulated region, i.e., perpendicular and parallel to the main supercurrent flow. The comparison of the magnetic field and supercurrent distributions shows deep differences between the two configurations. In particular, the enhanced vortex diffusion, observed for the perpendicular case, was not found in the parallel configuration. In a such case, unexpected vortex bundle jumps and a Meissner volume compression are clearly observed after the vortices enter the irradiated region., Comment: 19 pages including 12 figures

We present the experimental observation of magnetic field line curvature at the surface of a superconducting film by local quantitative magneto-optics. In addition to the knowledge of the full induction field at the superconductor surface yielding the quantitative observation of the flux line curvature, our analysis method allows also local value measurements of the electrical current density inside the sample. Thus, we study the interplay between the electrodynamic constraints dictated by the film geometry and the pinning properties of the superconductor. In particular, we investigate the anisotropic vortex-pinning, due to columnar defects introduced by heavy ion irradiation, as revealed in the local current density dependence on the vortex curvature during magnetic flux diffusion inside the superconducting film., Comment: 12 pages, 11 figures, to be submitted to Phys. Rev. B

An extended magneto-optical (MO) analysis of samples cut from high-density pellets of MgB2 is reported. For sake of comparison some magnetic measurements and critical values are also shown. Notwithstanding the fact that the optical and SEM images exhibit grains with different shape and size, all the samples investigated by MO analysis (three specimens of different shape and size) enter as a whole into a critical state. The current at different temperatures and fields, in a phase zone accessible to MO are calculated by means of a quantitative analysis. The analysis, based on the inversion of the Biot-Savart law, corresponds to three regimes: under-critical, critical and over-critical, respectively. A possible qualitative interpretation of the absence of magnetic granularity is given in the framework of a critical state likely reached by a network of strongly coupled Josephson Junctions., Comment: 6 pages, 7 figures