Search

Low Energy Ion Scattering (LEIS) was employed to study the surface composition of thin films of Ru on B, C and B4C films at different stages of growth. Effects of surface segregation of C were observed. Previously unknown matrix effects were observed in these samples, expressed in the decrease of LEIS signals of Ru, B and C at low Ru concentrations. The effect disappears for Ru-rich surfaces. Measurements with different He+ ion energies prove that the characteristic velocities of the elements involved change with surface composition. We suggest that these matrix effects appear due to the changes in neutralization efficiency in quasiresonant neutralization from the valence band (VB-qRN). This neutralization channel is present in elemental C and B due to a wide valence band with energy states as low as -20 eV, which are in a (quasi-)resonance with the He 1s level. This mechanism was earlier reported for graphitic carbon. We suggest that it can be applied to a much wider range of materials, leading to potential matrix effects in LEIS from a variety of surfaces, containing B, C and potentially O and N atoms, e.g. borides, carbides, oxides and nitrides, as well as alloys with B and C. This hypothesis is supported by additional LEIS measurements on oxidized Ru which show matrix effect in Ru-O LEIS signals as well. We argue that it is possible to avoid the matrix effects from compounded surfaces within certain ranges of composition by a proper choice of reference samples, while for other compositions knowledge of characteristic velocities is required for reliable quantification.

Renewed interest has been witnessed in utilizing the piezoelectric response of $PbZr_{0.52}Ti_{0.48}O_{3}$ (PZT) films on glass substrates for applications such as data storage and adaptive optics. Accordingly, new methodologies are being explored to grow well-oriented PZT thin films to harvest a large piezoelectric response. However, thin film piezoelectric response is significantly reduced compared to intrinsic response due to substrate induced clamping, even when films are well-oriented. Here, a novel method is presented to grow preferentially (100)-oriented PZT films on glass substrates by utilizing crystalline nanosheets as seed layers. Furthermore, increasing the repetition frequency up to 20 Hz during pulsed laser deposition helps to tune the film microstructure to hierarchically ordered columns that leads to reduced clamping and enhanced piezoelectric response evidenced by transmission electron microscopy and analytical calculations. A large piezoelectric response of 280 pm/V is observed in optimally tuned structure which almost triples the highest reported piezoelectric response on glass. To confirm that the clamping compromises the piezoelectric response, denser films are deposited using a lower repetition frequency and a $BiFeO_{3}$ buffer layer resulting in significantly reduced piezoelectric responses. This paper demonstrates a novel method for PZT integration on glass substrates without compromising the large piezoelectric response., Comment: 26 pages, 6 figures

We show that, under the right conditions, one can make highly accurate polarization-based measurements without knowing the absolute polarization state of the probing light field. It is shown that light, passed through a randomly varying birefringent material has a well-defined orbit on the Poincare sphere, which we term a generalized polarization state, that is preserved. Changes to the generalized polarization state can then be used in place of the absolute polarization states that make up the generalized state, to measure the change in polarization due to a sample under investigation. We illustrate the usefulness of this analysis approach by demonstrating fiber-based ellipsometry, where the polarization state of the probe light is unknown, and, yet, the ellipsometric angles of the investigated sample ($\Psi$ and $\Delta$) are obtained with an accuracy comparable to that of conventional ellipsometry instruments by measuring changes to the generalized polarization state., Comment: 6 pages, 4 figures, 1 table