Search

The increasing complexity of real-time control algorithms and the trend toward 2.5D technology necessitate the development of scalable controllers for managing the complex, integrated operation of chiplets within 2.5D systems-in-package. These controllers must provide real-time computing capabilities and have chiplet-compatible IO interfaces for communication with the controlled components. This work introduces ControlPULPlet, a chiplet-compatible, real-time multi-core RISC-V controller, which is available as an open-source release. It includes a 32-bit CV32RT core for efficient interrupt handling and a specialized direct memory access (DMA) engine to automate periodic sensor readouts. A tightly-coupled programmable multi-core accelerator is integrated via a dedicated AXI4 port. A flexible AXI4-compatible die-to-die (D2D) link supports inter-chiplet communication in 2.5D systems and enables high-bandwidth transfers in traditional 2D monolithic setups. We designed and fabricated ControlPULPlet as a silicon prototype called Kairos using TSMC's 65nm CMOS technology. Kairos executes predictive control algorithms at up to 290 MHz while consuming just 30 mW of power. The D2D link requires only 16.5 kGE in physical area per channel, adding just 2.9% to the total system area. It supports off-die access with an energy efficiency of 1.3 pJ/b and achieves a peak duplex transfer rate of 51 Gb/s per second at 200 MHz., Comment: 4.5 pages, 11 figures, submitted to Transactions on Circuits and Systems Part II - Express Briefs (TCAS-II)

The rapid advancement and exploration of open-hardware RISC-V platforms are driving significant changes in sectors like autonomous vehicles, smart-city infrastructure, and medical devices. OpenTitan stands out as a groundbreaking open-source RISC-V design with a comprehensive security toolkit as a standalone system-on-chip (SoC). OpenTitan includes Earl Grey, a fully implemented and silicon-proven SoC, and Darjeeling, announced but not yet fully implemented. Earl Grey targets standalone SoC implementations, while Darjeeling is for integrable implementations. The literature lacks a silicon-ready embedded implementation of an open-source Root of Trust, despite lowRISC's efforts on Darjeeling. We address the limitations of existing implementations by optimizing data transfer latency between memory and cryptographic accelerators to prevent under-utilization and ensure efficient task acceleration. Our contributions include a comprehensive methodology for integrating custom extensions and IPs into the Earl Grey architecture, architectural enhancements for system-level integration, support for varied boot modes, and improved data movement across the platform. These advancements facilitate deploying OpenTitan in broader SoCs, even without specific technology-dependent IPs, providing a deployment-ready research vehicle for the community. We integrated the extended Earl Grey architecture into a reference architecture in a 22nm FDX technology node, benchmarking the enhanced architecture's performance. The results show significant improvements in cryptographic processing speed, achieving up to 2.7x speedup for SHA-256/HMAC and 1.6x for AES accelerators compared to the baseline Earl Grey architecture.

The race towards performance increase and computing power has led to chips with heterogeneous and complex designs, integrating an ever-growing number of cores on the same monolithic chip or chiplet silicon die. Higher integration density, compounded with the slowdown of technology-driven power reduction, implies that power and thermal management become increasingly relevant. Unfortunately, existing research lacks a detailed analysis and modeling of thermal, power, and electrical coupling effects and how they have to be jointly considered to perform dynamic control of complex and heterogeneous Multi-Processor System on Chips (MPSoCs). To close the gap, in this work, we first provide a detailed thermal and power model targeting a modern High Performance Computing (HPC) MPSoC. We consider real-world coupling effects such as actuators' non-idealities and the exponential relation between the dissipated power, the temperature state, and the voltage level in a single processing element. We analyze how these factors affect the control algorithm behavior and the type of challenges that they pose. Based on the analysis, we propose a thermal capping strategy inspired by Fuzzy control theory to replace the state-of-the-art PID controller, as well as a root-finding iterative method to optimally choose the shared voltage value among cores grouped in the same voltage domain. We evaluate the proposed controller with model-in-the-loop and hardware-in-the-loop co-simulations. We show an improvement over state-of-the-art methods of up to 5x the maximum exceeded temperature while providing an average of 3.56% faster application execution runtime across all the evaluation scenarios., Comment: Paper in Review

RISC-V open-source systems are emerging in deployment scenarios where safety and security are critical. OpenTitan is an open-source silicon root-of-trust designed to be deployed in a wide range of systems, from high-end to deeply embedded secure environments. Despite the availability of various cryptographic hardware accelerators that make OpenTitan suitable for offloading cryptographic workloads from the main processor, there has been no accurate and quantitative establishment of the benefits derived from using OpenTitan as a secure accelerator. This paper addresses this gap by thoroughly analysing strengths and inefficiencies when offloading cryptographic workloads to OpenTitan. The focus is on three key IPs - HMAC, AES, and OpenTitan Big Number accelerator (OTBN) - which can accelerate four security workloads: Secure Hash Functions, Message Authentication Codes, Symmetric cryptography, and Asymmetric cryptography. For every workload, we develop a bare-metal driver for the OpenTitan accelerator and analyze its efficiency when computation is offloaded from a RISC-V application core within a System-on-Chip designed for secure Cyber-Physical Systems applications. Finally, we assess it against a software implementation on the application core. The characterization was conducted on a cycle-accurate RTL simulator of the System-on-Chip (SoC). Our study demonstrates that OpenTitan significantly outperforms software implementations, with speedups ranging from 4.3x to 12.5x. However, there is potential for even greater gains as the current OpenTitan utilizes a fraction of the accelerator bandwidths, which ranges from 16% to 61%, depending on the memory being accessed and the accelerator used. Our results open the way to the optimization of OpenTitan-based secure platforms, providing design guidelines to unlock the full potential of its accelerators in secure applications., Comment: 8 pages, 2 figures, accepted at CF'24 conference, pre camera-ready version

Modern RISC-V platforms control and monitor security-critical systems such as industrial controllers and autonomous vehicles. While these platforms feature a Root-of-Trust (RoT) to store authentication secrets and enable secure boot technologies, they often lack Control-Flow Integrity (CFI) enforcement and are vulnerable to cyber-attacks which divert the control flow of an application to trigger malicious behaviours. Recent techniques to enforce CFI in RISC-V systems include ISA modifications or custom hardware IPs, all requiring ad-hoc binary toolchains or design of CFI primitives in hardware. This paper proposes TitanCFI, a novel approach to enforce CFI in the RoT. TitanCFI modifies the commit stage of the protected core to stream control flow instructions to the RoT and it integrates the CFI enforcement policy in the RoT firmware. Our approach enables maximum reuse of the hardware resource present in the System-on-Chip (SoC), and it avoids the design of custom IPs and the modification of the compilation toolchain, while exploiting the RoT tamper-proof storage and cryptographic accelerators to secure CFI metadata. We implemented the proposed architecture on a modern RISC-V SoC along with a return address protection policy in the RoT, and benchmarked area and runtime overhead. Experimental results show that TitanCFI achieves overhead comparable to SoA hardware CFI solutions for most benchmarks, with lower area overhead, resulting in 1% of additional area occupation., Comment: 6 pages, 1 figure, accepted at DATE'24 conference, pre camera-ready version

High-Performance Computing (HPC) processors are nowadays integrated Cyber-Physical Systems demanding complex and high-bandwidth closed-loop power and thermal control strategies. To efficiently satisfy real-time multi-input multi-output (MIMO) optimal power requirements, high-end processors integrate an on-die power controller system (PCS). While traditional PCSs are based on a simple microcontroller (MCU)-class core, more scalable and flexible PCS architectures are required to support advanced MIMO control algorithms for managing the ever-increasing number of cores, power states, and process, voltage, and temperature variability. This paper presents ControlPULP, an open-source, HW/SW RISC-V parallel PCS platform consisting of a single-core MCU with fast interrupt handling coupled with a scalable multi-core programmable cluster accelerator and a specialized DMA engine for the parallel acceleration of real-time power management policies. ControlPULP relies on FreeRTOS to schedule a reactive power control firmware (PCF) application layer. We demonstrate ControlPULP in a power management use-case targeting a next-generation 72-core HPC processor. We first show that the multi-core cluster accelerates the PCF, achieving 4.9x speedup compared to single-core execution, enabling more advanced power management algorithms within the control hyper-period at a shallow area overhead, about 0.1% the area of a modern HPC CPU die. We then assess the PCS and PCF by designing an FPGA-based, closed-loop emulation framework that leverages the heterogeneous SoCs paradigm, achieving DVFS tracking with a mean deviation within 3% the plant's thermal design power (TDP) against a software-equivalent model-in-the-loop approach. Finally, we show that the proposed PCF compares favorably with an industry-grade control algorithm under computational-intensive workloads., Comment: 33 pages, 11 figures

DECICE is a Horizon Europe project that is developing an AI-enabled open and portable management framework for automatic and adaptive optimization and deployment of applications in computing continuum encompassing from IoT sensors on the Edge to large-scale Cloud / HPC computing infrastructures. In this paper, we describe the DECICE framework and architecture. Furthermore, we highlight use-cases for framework evaluation: intelligent traffic intersection, magnetic resonance imaging, and emergency response.

Decentralised Machine Learning (DML) enables collaborative machine learning without centralised input data. Federated Learning (FL) and Edge Inference are examples of DML. While tools for DML (especially FL) are starting to flourish, many are not flexible and portable enough to experiment with novel processors (e.g., RISC-V), non-fully connected network topologies, and asynchronous collaboration schemes. We overcome these limitations via a domain-specific language allowing us to map DML schemes to an underlying middleware, i.e. the FastFlow parallel programming library. We experiment with it by generating different working DML schemes on x86-64 and ARM platforms and an emerging RISC-V one. We characterise the performance and energy efficiency of the presented schemes and systems. As a byproduct, we introduce a RISC-V porting of the PyTorch framework, the first publicly available to our knowledge., Comment: This paper is the accepted version of ACM copyrighted material presented at the CF'23 conference in Bologna, Italy

The increasing complexity of modern high-performance computing (HPC) systems necessitates the introduction of automated and data-driven methodologies to support system administrators' effort toward increasing the system's availability. Anomaly detection is an integral part of improving the availability as it eases the system administrator's burden and reduces the time between an anomaly and its resolution. However, current state-of-the-art (SoA) approaches to anomaly detection are supervised and semi-supervised, so they require a human-labelled dataset with anomalies - this is often impractical to collect in production HPC systems. Unsupervised anomaly detection approaches based on clustering, aimed at alleviating the need for accurate anomaly data, have so far shown poor performance. In this work, we overcome these limitations by proposing RUAD, a novel Recurrent Unsupervised Anomaly Detection model. RUAD achieves better results than the current semi-supervised and unsupervised SoA approaches. This is achieved by considering temporal dependencies in the data and including long-short term memory cells in the model architecture. The proposed approach is assessed on a complete ten-month history of a Tier-0 system (Marconi100 from CINECA with 980 nodes). RUAD achieves an area under the curve (AUC) of 0.763 in semi-supervised training and an AUC of 0.767 in unsupervised training, which improves upon the SoA approach that achieves an AUC of 0.747 in semi-supervised training and an AUC of 0.734 in unsupervised training. It also vastly outperforms the current SoA unsupervised anomaly detection approach based on clustering, achieving the AUC of 0.548.

The new open and royalty-free RISC-V ISA is attracting interest across the whole computing continuum, from microcontrollers to supercomputers. High-performance RISC-V processors and accelerators have been announced, but RISC-V-based HPC systems will need a holistic co-design effort, spanning memory, storage hierarchy interconnects and full software stack. In this paper, we describe Monte Cimone, a fully-operational multi-blade computer prototype and hardware-software test-bed based on U740, a double-precision capable multi-core, 64-bit RISC-V SoC. Monte Cimone does not aim to achieve strong floating-point performance, but it was built with the purpose of "priming the pipe" and exploring the challenges of integrating a multi-node RISC-V cluster capable of providing an HPC production stack including interconnect, storage and power monitoring infrastructure on RISC-V hardware. We present the results of our hardware/software integration effort, which demonstrate a remarkable level of software and hardware readiness and maturity - showing that the first generation of RISC-V HPC machines may not be so far in the future.

The analysis of source code through machine learning techniques is an increasingly explored research topic aiming at increasing smartness in the software toolchain to exploit modern architectures in the best possible way. In the case of low-power, parallel embedded architectures, this means finding the configuration, for instance in terms of the number of cores, leading to minimum energy consumption. Depending on the kernel to be executed, the energy optimal scaling configuration is not trivial. While recent work has focused on general-purpose systems to learn and predict the best execution target in terms of the execution time of a snippet of code or kernel (e.g. offload OpenCL kernel on multicore CPU or GPU), in this work we focus on static compile-time features to assess if they can be successfully used to predict the minimum energy configuration on PULP, an ultra-low-power architecture featuring an on-chip cluster of RISC-V processors. Experiments show that using machine learning models on the source code to select the best energy scaling configuration automatically is viable and has the potential to be used in the context of automatic system configuration for energy minimisation.

Efficiently utilizing procured power and optimizing performance of scientific applications under power and energy constraints are challenging. The HPC PowerStack defines a software stack to manage power and energy of high-performance computing systems and standardizes the interfaces between different components of the stack. This survey paper presents the findings of a working group focused on the end-to-end tuning of the PowerStack. First, we provide a background on the PowerStack layer-specific tuning efforts in terms of their high-level objectives, the constraints and optimization goals, layer-specific telemetry, and control parameters, and we list the existing software solutions that address those challenges. Second, we propose the PowerStack end-to-end auto-tuning framework, identify the opportunities in co-tuning different layers in the PowerStack, and present specific use cases and solutions. Third, we discuss the research opportunities and challenges for collective auto-tuning of two or more management layers (or domains) in the PowerStack. This paper takes the first steps in identifying and aggregating the important R&D challenges in streamlining the optimization efforts across the layers of the PowerStack., Comment: to be published in Energy Efficient HPC State of Practice 2020

As High-Performance Computing (HPC) systems strive towards the exascale goal, failure rates both at the hardware and software levels will increase significantly. Thus, detecting and classifying faults in HPC systems as they occur and initiating corrective actions before they can transform into failures becomes essential for continued operation. Central to this objective is fault injection, which is the deliberate triggering of faults in a system so as to observe their behavior in a controlled environment. In this paper, we propose a fault classification method for HPC systems based on machine learning. The novelty of our approach rests with the fact that it can be operated on streamed data in an online manner, thus opening the possibility to devise and enact control actions on the target system in real-time. We introduce a high-level, easy-to-use fault injection tool called FINJ, with a focus on the management of complex experiments. In order to train and evaluate our machine learning classifiers, we inject faults to an in-house experimental HPC system using FINJ, and generate a fault dataset which we describe extensively. Both FINJ and the dataset are publicly available to facilitate resiliency research in the HPC systems field. Experimental results demonstrate that our approach allows almost perfect classification accuracy to be reached for different fault types with low computational overhead and minimal delay., Comment: arXiv admin note: text overlap with arXiv:1807.10056, arXiv:1810.11208

The increasing use of Internet-of-Things (IoT) devices for monitoring a wide spectrum of applications, along with the challenges of "big data" streaming support they often require for data analysis, is nowadays pushing for an increased attention to the emerging edge computing paradigm. In particular, smart approaches to manage and analyze data directly on the network edge, are more and more investigated, and Artificial Intelligence (AI) powered edge computing is envisaged to be a promising direction. In this paper, we focus on Data Centers (DCs) and Supercomputers (SCs), where a new generation of high-resolution monitoring systems is being deployed, opening new opportunities for analysis like anomaly detection and security, but introducing new challenges for handling the vast amount of data it produces. In detail, we report on a novel lightweight and scalable approach to increase the security of DCs/SCs, that involves AI-powered edge computing on high-resolution power consumption. The method -- called pAElla -- targets real-time Malware Detection (MD), it runs on an out-of-band IoT-based monitoring system for DCs/SCs, and involves Power Spectral Density of power measurements, along with AutoEncoders. Results are promising, with an F1-score close to 1, and a False Alarm and Malware Miss rate close to 0%. We compare our method with State-of-the-Art MD techniques and show that, in the context of DCs/SCs, pAElla can cover a wider range of malware, significantly outperforming SoA approaches in terms of accuracy. Moreover, we propose a methodology for online training suitable for DCs/SCs in production, and release open dataset and code.

The power consumption of supercomputers is a major challenge for system owners, users, and society. It limits the capacity of system installations, it requires large cooling infrastructures, and it is the cause of a large carbon footprint. Reducing power during application execution without changing the application source code or increasing time-to-completion is highly desirable in real-life high-performance computing scenarios. The power management run-time frameworks proposed in the last decade are based on the assumption that the duration of communication and application phases in an MPI application can be predicted and used at run-time to trade-off communication slack with power consumption. In this manuscript, we first show that this assumption is too general and leads to mispredictions, slowing down applications, thereby jeopardizing the claimed benefits. We then propose a new approach based on (i) the separation of communication phases and slack during MPI calls and (ii) a timeout algorithm to cope with the hardware power management latency, which jointly makes it possible to achieve performance-neutral power saving in MPI applications without requiring labor-intensive and risky application source code modifications. We validate our approach in a tier-1 production environment with widely adopted scientific applications. Our approach has a time-to-completion overhead lower than 1%, while it successfully exploits slack in communication phases to achieve an average energy saving of 10%. If we focus on a large-scale application runs, the proposed approach achieves 22% energy saving with an overhead of only 0.4%. With respect to state-of-the-art approaches, COUNTDOWN Slack is the only that always leads to an energy saving with negligible overhead (<3%)., Comment: 13 pages, 4 figures, 3 tables

Reliability is a cumbersome problem in High Performance Computing Systems and Data Centers evolution. During operation, several types of fault conditions or anomalies can arise, ranging from malfunctioning hardware to improper configurations or imperfect software. Currently, system administrator and final users have to discover it manually. Clearly this approach does not scale to large scale supercomputers and facilities: automated methods to detect faults and unhealthy conditions is needed. Our method uses a type of neural network called autoncoder trained to learn the normal behavior of a real, in-production HPC system and it is deployed on the edge of each computing node. We obtain a very good accuracy (values ranging between 90% and 95%) and we also demonstrate that the approach can be deployed on the supercomputer nodes without negatively affecting the computing units performance., Comment: Preprint of paper submitted and accepted AICAS2019 Conference (1st IEEE International Conference on Artificial Intelligence Circuits and Systems)

High-performance computing installations, which are at the basis of web and cloud servers as well as supercomputers, are constrained by two main conflicting requirements: IT power consumption generated by the computing nodes and the heat that must be removed to avoid thermal hazards. In the worst cases, up to 60% of the energy consumed in a data center is used for cooling, often related to an over-designed cooling system. We propose a low-cost and battery-supplied wireless sensor network (WSN) for fine-grained, flexible and long-term data center temperature monitoring. The WSN has been operational collecting more than six million data points, with no losses, for six months without battery recharges. Our work reaches a 300x better energy efficiency than the previously reported WSNs for similar scenarios and on a 7x wider area. The data collected by the network can be used to optimize cooling effort while avoiding dangerous hot spots., Comment: 9 pages

The ANTAREX project relies on a Domain Specific Language (DSL) based on Aspect Oriented Programming (AOP) concepts to allow applications to enforce extra functional properties such as energy-efficiency and performance and to optimize Quality of Service (QoS) in an adaptive way. The DSL approach allows the definition of energy-efficiency, performance, and adaptivity strategies as well as their enforcement at runtime through application autotuning and resource and power management. In this paper, we present an overview of the key outcome of the project, the ANTAREX DSL, and some of its capabilities through a number of examples, including how the DSL is applied in the context of the project use cases.

Anomaly detection in supercomputers is a very difficult problem due to the big scale of the systems and the high number of components. The current state of the art for automated anomaly detection employs Machine Learning methods or statistical regression models in a supervised fashion, meaning that the detection tool is trained to distinguish among a fixed set of behaviour classes (healthy and unhealthy states). We propose a novel approach for anomaly detection in High Performance Computing systems based on a Machine (Deep) Learning technique, namely a type of neural network called autoencoder. The key idea is to train a set of autoencoders to learn the normal (healthy) behaviour of the supercomputer nodes and, after training, use them to identify abnormal conditions. This is different from previous approaches which where based on learning the abnormal condition, for which there are much smaller datasets (since it is very hard to identify them to begin with). We test our approach on a real supercomputer equipped with a fine-grained, scalable monitoring infrastructure that can provide large amount of data to characterize the system behaviour. The results are extremely promising: after the training phase to learn the normal system behaviour, our method is capable of detecting anomalies that have never been seen before with a very good accuracy (values ranging between 88% and 96%)., Comment: 9 pages, 3 figures

As High-Performance Computing (HPC) systems strive towards the exascale goal, studies suggest that they will experience excessive failure rates. For this reason, detecting and classifying faults in HPC systems as they occur and initiating corrective actions before they can transform into failures will be essential for continued operation. In this paper, we propose a fault classification method for HPC systems based on machine learning that has been designed specifically to operate with live streamed data. We cast the problem and its solution within realistic operating constraints of online use. Our results show that almost perfect classification accuracy can be reached for different fault types with low computational overhead and minimal delay. We have based our study on a local dataset, which we make publicly available, that was acquired by injecting faults to an in-house experimental HPC system., Comment: Accepted for publication at the Euro-Par 2019 conference

Power and thermal management are critical components of High-Performance-Computing (HPC) systems, due to their high power density and large total power consumption. The assessment of thermal dissipation by means of compact models directly from the thermal response of the final device enables more robust and precise thermal control strategies as well as automated diagnosis. However, when dealing with large scale systems "in production", the accuracy of learned thermal models depends on the dynamics of the power excitation, which depends also on the executed workload, and measurement nonidealities, such as quantization. In this paper we show that, using an advanced system identification algorithm, we are able to generate very accurate thermal models (average error lower than our sensors quantization step of 1{\deg}C) for a large scale HPC system on real workloads for very long time periods. However, we also show that: 1) not all real workloads allow for the identification of a good model; 2) starting from the theory of system identification it is very difficult to evaluate if a trace of data leads to a good estimated model. We then propose and validate a set of techniques based on machine learning and deep learning algorithms for the choice of data traces to be used for model identification. We also show that deep learning techniques are absolutely necessary to correctly choose such traces up to 96% of the times.

We present FINJ, a high-level fault injection tool for High-Performance Computing (HPC) systems, with a focus on the management of complex experiments. FINJ provides support for custom workloads and allows generation of anomalous conditions through the use of fault-triggering executable programs. FINJ can also be integrated seamlessly with most other lower-level fault injection tools, allowing users to create and monitor a variety of highly-complex and diverse fault conditions in HPC systems that would be difficult to recreate in practice. FINJ is suitable for experiments involving many, potentially interacting nodes, making it a very versatile design and evaluation tool., Comment: To be presented at the 11th Resilience Workshop in the 2018 Euro-Par conference

Power and energy consumption is becoming key challenges to deploy the first exascale supercomputer successfully. Large-scale HPC applications waste a significant amount of power in communication and synchronization-related idle times. However, due to the time scale at which communication happens, transitioning in low power states during communication's idle times may introduce unacceptable overhead in applications' execution time. In this paper, we present COUNTDOWN, a runtime library, supported by a methodology and analysis tool for identifying and automatically reducing the power consumption of the computing elements during communication and synchronization. COUNTDOWN saves energy without imposing significant time-to-completion increase by lowering CPUs power consumption only during idle times for which power state transition overhead are negligible. This is done transparently to the user, without requiring labor-intensive and error-prone application code modifications, nor requiring recompilation of the application. We test our methodology in a production Tier-0 system. For the NAS benchmarks, COUNTDOWN saves between 6% and 50% energy, with a time-to-solution penalty lower than 5%. In a complete production --- Quantum ESPRESSO --- for a 3.5K cores run, COUNTDOWN saves 22.36% energy, with a performance penalty below 3%. Energy saving increases to 37% with a performance penalty of 6.38%, if the application is executed without communication tuning., Comment: 14 pages, 11 figures

Energy efficiency is of paramount importance for the sustainability of HPC systems. Energy consumption limits the peak performance of supercomputers and accounts for a large share of total cost of ownership. Consequently, system owners and final users have started exploring mechanisms to trade off performance for power consumption, for example through frequency and voltage scaling. However, only a limited number of studies have been devoted to explore the economic viability of performance scaling solutions and to devise pricing mechanisms fostering a more energy-conscious usage of resources, without adversely impacting return-of-investment on the HPC facility. We present a parametrized model to analyze the impact of frequency scaling on energy and to assess the potential total cost benefits for the HPC facility and the user. We evaluate four pricing schemes, considering both facility manager and the user perspectives. We then perform a design space exploration considering current and near-future HPC systems and technologies.

Data centers are increasing in size and complexity, and we need scalable approaches to support their automated analysis and control. Performance counters and power consumption are their key "vital signs". State-of-the-Art (SoA) monitoring systems provide built-in tools to collect performance measurements, and custom solutions to get insight on their power consumption. However, with the increase in measurement resolution (in time and space) and the ensuing huge amount of measurement data to handle, new challenges arise, such as bottlenecks on the network bandwidth, storage and software overhead on the monitoring units. To face these challenges we propose a novel monitoring platform for data centers, which enables real-time high-resolution profiling (i.e., all available performance counters and the entire signal bandwidth of the power consumption at the plug - sampling up to 20us - with an error below 1%) and analytics, both at the edge (node-level analysis) and on a centralized unit (cluster-level analysis). The monitoring infrastructure is completely out-of-band, scalable, technology agnostic and low cost, and it is already installed in a SoA high-performance compute cluster (i.e., D.A.V.I.D.E. - 18th in Green500 November 2017).