Search

In recent years, approximately 150 low-mass white dwarfs (WDs), typically with masses below 0.4 solar masses, have been discovered. Observational evidence indicates that most of these low-mass WDs are found in binary systems, supporting binary evolution scenarios as the primary formation pathway. A few extremely low-mass (ELM) WDs in this population have also been found to be pulsationally variable. In this work, we present a comprehensive analysis aimed at identifying new variable low-mass WDs. From our candidate selection, we observed 16 objects identified within the ZZ Ceti instability strip. These objects were observed over multiple nights using high-speed photometry from the SOAR/Goodman and SMARTS-1m telescopes. Our analysis led to the discovery of three new pulsating WDs: one pulsating ELM, one low-mass WD, and one ZZ Ceti star. Additionally, we identified three objects in binary systems: two with ellipsoidal variations in their light curves, one of which is likely a pre-ELM star, and a third showing a reflection effect.

Incoherent Diffraction Imaging - IDI - is a diffraction-based imaging technique that has been recently proposed to exploit the partial coherence of incoherently scattered light to retrieve structural information from the scattering centers. Similar to the stellar intensity interferometry of Hanbury Brown and Twiss, the signal builds up on the second-order spatial correlations of the emitted light. The complex spatial distribution of the target is thereby encoded in the spatial intensity fluctuations of the scattered light. The first experimental realisations of this imaging technique have been realised using the fluorescence excited by an ultra-short X-ray pulse at Free Electron Laser (FEL) facilities. Here, we propose an alternative set-up based on a table-top Pseudo-Thermal Light Source. This set-up allows us to explore IDI under a wide range of physically relevant conditions as well as to benchmark numerical and analytical models currently used to determine the imaging capabilities of this technique.

Remote sensing observations and Mars rover missions have recorded the presence of beaches, salt lakes, and wind erosion landforms in Martian sediments. All these observations indicate that Mars was hydrated in its early history. There used to be oceans on Mars, but they have now dried up. Therefore, signs of previous life on Mars could be preserved in the evaporites formed during this process. The study of evaporite regions has thus become a priority area for Mars' life exploration. This study proposes a method for training similarity metrics from surface land image data of Earth and Mars, which can be used for recognition or validation applications. The method will be applied in simulating tasks to select Mars landing sites using a selecting small-scale area of the Mars analaogue the evaporite region of Qaidam Basin, Qinghai-Tibet Plateau. This learning process minimizes discriminative loss function, which makes the similarity measure smaller for images from the same location and larger for images from different locations. This study selected a Convolutional Neural Networks (CNN) based model, which has been trained to explain various changes in image appearance and identify different landforms in Mars. By identifying different landforms, priority landing sites on Mars can be selected., Comment: 22 page,16 figures

Coupling $N$ large rank $m$ minimal models and flowing to IR fixed points is a systematic way to build new classes of compact unitary 2d CFTs which are likely to be irrational, and potentially have a positive Virasoro twist gap above the vaccuum. In this paper, we build on the construction of [1], establishing that, for spins less than 10, additional currents transforming in non-trivial irreducible representations of the permutation symmetry $S_N$ are not conserved at the IR fixed points. Along the way, we develop a finer understanding of the spectrum of these theories, of the special properties of the $N=4$ case and of non-invertible symmetries that constrain them. We also discuss variations of the original setup of [1] some of which can exist for smaller values of the UV central charge., Comment: 30 pages + references, 3 figures, 6 tables; v2: added references, fixed typo

The aim of this paper is to introduce the logics FFDE and FN4, which are universally free versions of Belnap-Dunn's four-valued logic, also known as the logic of first-degree entailment (FDE), and Nelson's paraconsistent logic QN4 (N-). Both FDE and QN4 are suitable to be interpreted as information-based logics, that is, logics that are capable of representing the deductive behavior of possibly inconsistent and incomplete information in a database. Like QN4 and some non-free first-order extensions of FDE, FFDE and FN4 are endowed with Kripke-style variable domain semantics, which allows representing the dynamic aspect of information processing, that is, how a database receives new information over time, including information about new individuals. We argue, however, that FFDE and FN4 can better represent the development of inconsistent and incomplete information states (i.e., configurations of a database) over time than their non-free versions. First, because they allow for empty domains, which corresponds to the idea that a database may acknowledge no individual at all at an early stage of its development. Second, because they allow for empty names, which get interpreted as information about new individuals is inserted into the database. Also, both systems include an identity predicate that is interpreted along the same lines of the other logical operators, viz., in terms of independent positive and negative rules.

One goal of Artificial Intelligence is to learn meaningful representations for natural language expressions, but what this entails is not always clear. A variety of new linguistic behaviours present themselves embodied as computers, enhanced humans, and collectives with various kinds of integration and communication. But to measure and understand the behaviours generated by such systems, we must clarify the language we use to talk about them. Computational models are often confused with the phenomena they try to model and shallow metaphors are used as justifications for (or to hype) the success of computational techniques on many tasks related to natural language; thus implying their progress toward human-level machine intelligence without ever clarifying what that means. This paper discusses the challenges in the specification of "machines of meaning", machines capable of acquiring meaningful semantics from natural language in order to achieve their goals. We characterize "meaning" in a computational setting, while highlighting the need for detachment from anthropocentrism in the study of the behaviour of machines of meaning. The pressing need to analyse AI risks and ethics requires a proper measurement of its capabilities which cannot be productively studied and explained while using ambiguous language. We propose a view of "meaning" to facilitate the discourse around approaches such as neural language models and help broaden the research perspectives for technology that facilitates dialogues between humans and machines.

We report the crystal structures, magnetic and thermodynamic properties of two magnetically frustrated $A$'$A$"$M_2$F$_7$-type antiferromagnets, NaCdNi$_2$F$_7$ and NaCdMn$_2$F$_7$. While NaCdNi$_2$F$_7$ forms a stable pyrochlore structure (SG: $Fd \overline{3} m$, #227) with magnetic $S$ = 1 Ni$^{2+}$ ions on the frustrated pyrochlore 16$c$ site and fully disordered non-magnetic Na$^+$/Cd$^{2+}$ ions on the pyrochlore 16$d$ site, NaCdMn$_2$F$_7$ favors the defect-fluorite structure (SG: $Fm \overline{3} m$, #225) with magnetic $S$ = 5/2 Mn$^{2+}$ and non-magnetic Na$^+$ and Cd$^{2+}$ ions fully disordered on the fluorite 4$a$ site. This is a result of the Mn$^{2+}$ ionic radius being too close to the average Na$^+$/Cd$^{2+}$ ionic radius, hindering the cationic site ordering towards the stable pyrochlore structure. In both cases, dominant antiferromagnetic interactions $\theta_{CW,Ni}$ = -91.2(5) K and $\theta_{CW,Mn}$ = -42.4(4) K are noted, with no magnetic transition until $T_{f,Ni}$ = 3.2 K and $T_{f,Mn}$ = 2.0 K, implying substantial frustration, with frustration indices $f_{Ni}$ = 28.5 and $f_{Mn}$ = 21. AC susceptibility measurements and bifurcation of ZFC/FC low-field magnetization indicate a glassy ground-state, precipitated by the magnetic-bond-disorder stemming from the inherent structural disorder.

Accurate object detection and prediction are critical to ensure the safety and efficiency of self-driving architectures. Predicting object trajectories and occupancy enables autonomous vehicles to anticipate movements and make decisions with future information, increasing their adaptability and reducing the risk of accidents. Current State-Of-The-Art (SOTA) approaches often isolate the detection, tracking, and prediction stages, which can lead to significant prediction errors due to accumulated inaccuracies between stages. Recent advances have improved the feature representation of multi-camera perception systems through Bird's-Eye View (BEV) transformations, boosting the development of end-to-end systems capable of predicting environmental elements directly from vehicle sensor data. These systems, however, often suffer from high processing times and number of parameters, creating challenges for real-world deployment. To address these issues, this paper introduces a novel BEV instance prediction architecture based on a simplified paradigm that relies only on instance segmentation and flow prediction. The proposed system prioritizes speed, aiming at reduced parameter counts and inference times compared to existing SOTA architectures, thanks to the incorporation of an efficient transformer-based architecture. Furthermore, the implementation of the proposed architecture is optimized for performance improvements in PyTorch version 2.1. Code and trained models are available at https://github.com/miguelag99/Efficient-Instance-Prediction, Comment: The article has been presented in the 27th IEEE International Conference on Intelligent Transportation Systems (IEEE ITSC 2024) on September, 2024. Number of pages: 6, Number of figures: 4

We investigate perturbations in power-law monomial potentials within inflationary models driven by a single scalar field. By introducing a second term to the original potential, we study how this perturbation influences the slow-roll parameters and analyze the consequent changes in the spectral index, $n_s$, and the tensor-to-scalar ratio, $r$, treating the additional term as a correction to the monomial case. Comparing our numerical results with current cosmological data from the Planck satellite observations on $n_s$, $r$, and the clustering parameter, $\sigma_8$, we place significant constraints on the free parameter of our class of inflationary potentials. We found that the perturbative consistency method we analyze could be an interesting test to explore for more complex inflationary models, looking for features that better match the data that might highlight fundamental physics implications., Comment: 17 pages, 9 figures

Communication primitives play a central role in modern computing. They offer a panel of reliability and ordering guarantees for messages, enabling the implementation of complex distributed interactions. In particular, atomic broadcast is a pivotal abstraction for implementing fault-tolerant distributed services. This primitive allows disseminating messages across the system in a total order. There are two group communication primitives closely related to atomic broadcast. Atomic multicast permits targeting a subset of participants, possibly stricter than the whole system. Generic broadcast leverages the semantics of messages to order them only where necessary (that is when they conflict). In this paper, we propose to combine all these primitives into a single, more general one, called generic multicast. We formally specify the guarantees offered by generic multicast and present efficient algorithms. Compared to prior works, our solutions offer appealing properties in terms of time and space complexity. In particular, when a run is conflict-free, that is no two messages conflict, a message is delivered after at most three message delays., Comment: 12 pages, 2 figures

A cantilever beam under axial flow, confined or not, is known to develop self-sustained oscillations at sufficiently large flow velocities. In recent decades, the analysis of this archetypal system has been mostly pursued under linearized conditions, to calculate the critical boundaries separating stable from unstable behavior. However, nonlinear analysis of the self-sustained oscillations ensuing flutter instabilities are considerably rarer. Here we present a simplified one-dimensional nonlinear model describing a cantilever beam subjected to confined axial flow, for generic axial profiles of the fluid channels. In particular, we explore how the shape of the confinement walls affects the dynamics of the system. To simplify the problem, we consider symmetric channels with plane walls in either converging or diverging configurations. The beam is modeled in a modal framework, while bulk-flow equations, including singular head-loss terms, are used to model the flow-structure coupling forces. The dynamics of the system are first analyzed through linear stability analysis to assess the stabilizing/destabilizing effects of the channel walls configuration. Subsequently, we develop a systematic nonlinear analysis based on the continuation of periodic solutions. The harmonic balance method is used in conjunction with the asymptotic numerical method to calculate branches of periodic solutions. The continuation-based methods are used to investigate bifurcations with respect to both the reduced flow velocity and the channel slope parameter. From the results presented, we illustrate how continuationbased approaches and bifurcation analysis provide an efficient tool to analyze the nonlinear behavior of flow-induced vibration problems, particularly when reduced/simplified models are available., Comment: 22nd International Conference of Numerical Analysis and Applied Mathematics, Sep 2024, Heraklion, Greece

Reinforcement learning (RL) has seen significant research and application results but often requires large amounts of training data. This paper proposes two data-efficient off-policy RL methods that use parametrized Q-learning. In these methods, the Q-function is chosen to be linear in the parameters and quadratic in selected basis functions in the state and control deviations from a base policy. A cost penalizing the $\ell_1$-norm of Bellman errors is minimized. We propose two methods: Linear Matrix Inequality Q-Learning (LMI-QL) and its iterative variant (LMI-QLi), which solve the resulting episodic optimization problem through convex optimization. LMI-QL relies on a convex relaxation that yields a semidefinite programming (SDP) problem with linear matrix inequalities (LMIs). LMI-QLi entails solving sequential iterations of an SDP problem. Both methods combine convex optimization with direct Q-function learning, significantly improving learning speed. A numerical case study demonstrates their advantages over existing parametrized Q-learning methods., Comment: Accepted for Presentation at 63rd IEEE Conference on Decision and Control, CDC 2024, Milan, Italy, 2024

The Covid-19 pandemic has affected the world at multiple levels. Data sharing was pivotal for advancing research to understand the underlying causes and implement effective containment strategies. In response, many countries have promoted the availability of daily cases to support research initiatives, fostering collaboration between organisations and making such data available to the public through open data platforms. Despite the several advantages of data sharing, one of the major concerns before releasing health data is its impact on individuals' privacy. Such a sharing process should be based on state-of-the-art methods in Data Protection by Design and by Default. In this paper, we use a data set related to Covid-19 cases in the second largest hospital in Portugal to show how it is feasible to ensure data privacy while improving the quality and maintaining the utility of the data. Our goal is to demonstrate how knowledge exchange in multidisciplinary teams of healthcare practitioners, data privacy, and data science experts is crucial to co-developing strategies that ensure high utility of de-identified data., Comment: 7 figures and 8 tables

[Context] The adoption of micro-frontends architectures has gained traction as a promising approach to enhance modularity, scalability, and maintainability of web applications. [Goal] The primary aim of this research is to investigate the benefits and limitations of migrating a real-world application to a micro-frontends architecture from the perspective of the developers. [Method] Based on the action research approach, after diagnosis and planning, we applied an intervention of migrating the target web application to a micro-frontends architecture. Thereafter, the migration was evaluated in a workshop involving the remaining developers responsible for maintaining the application. During the workshop, these developers were presented with the migrated architecture, conducted a simple maintenance task, discussed benefits and limitations in a focus group to gather insights, and answered a questionnaire on the acceptance of the technology. [Results] Developers' perceptions gathered during the focus group reinforce the benefits and limitations reported in the literature. Key benefits included enhanced flexibility in technology choices, scalability of development teams, and gradual migration of technologies. However, the increased complexity of the architecture raised concerns among developers, particularly in dependency and environment management, debugging, and integration testing. [Conclusions] While micro-frontends represent a promising technology, unresolved issues still limit their broader applicability. Developers generally perceived the architecture as useful and moderately easy to use but hesitated to adopt it.

Traditional Byzantine Fault Tolerance (BFT) state machine replication protocols assume a partial synchrony model, leading to a design where a leader replica drives the protocol and is replaced after a timeout. Recently, we witnessed a surge of asynchronous BFT protocols, which use randomization to remove the need for bounds on message delivery times, making them more resilient to adverse network conditions. However, existing research proposals still fall short of gaining practical adoption, plausibly because they are not able to combine good performance with a simple design that can be readily understood and adopted. In this paper, we present Alea-BFT, a simple and highly efficient asynchronous BFT protocol, which is gaining practical adoption, namely in Ethereum distributed validators. Alea-BFT brings the key design insight from classical protocols of concentrating part of the work on a single designated replica and incorporates this principle in a simple two-stage pipelined design, with an efficient broadcast led by the designated replica, followed by an inexpensive binary agreement. The evaluation of our research prototype implementation and two real-world integrations in cryptocurrency ecosystems shows excellent performance, improving on the fastest protocol (Dumbo-NG) in terms of latency and displaying good performance under faults., Comment: arXiv admin note: substantial text overlap with arXiv:2202.02071

We present solutions corresponding to rotational configurations in the recently proposed Geometric Scalar Gravity (GSG) theory. The solutions obtained here have the important property that the associated closed time-like curves are always restricted to a compact domain of space-time. We compare this property with those of analogous solutions in General Relativity (GR).

We develop a semi-analytical model for transport in structured catalytic microreactors, where both reactant and product are compressible fluids. Making use of the lubrication and Fick-Jacobs approximations, we reduce the three-dimensional governing equations to an effective one-dimensional set of equations. Our model captures the effect of compressibility, of corrugations in the shape of the reactor, as well as of an inhomogeneous catalytic coating of the reactor walls. We show that in the weakly compressible limit (e.g., liquid-phase reactors), the distribution of catalyst does not influence the reactor yield, which we verify experimentally. Beyond this limit, we show that introducing inhomogeneities in the catalytic coating and corrugations to the reactor walls can improve the yield.

Sharing private data for learning tasks is pivotal for transparent and secure machine learning applications. Many privacy-preserving techniques have been proposed for this task aiming to transform the data while ensuring the privacy of individuals. Some of these techniques have been incorporated into tools, whereas others are accessed through various online platforms. However, such tools require manual configuration, which can be complex and time-consuming. Moreover, they require substantial expertise, potentially restricting their use to those with advanced technical knowledge. In this paper, we propose AUTOPRIV, the first automated privacy-preservation method, that eliminates the need for any manual configuration. AUTOPRIV employs meta-learning to automate the de-identification process, facilitating the secure release of data for machine learning tasks. The main goal is to anticipate the predictive performance and privacy risk of a large set of privacy configurations. We provide a ranked list of the most promising solutions, which are likely to achieve an optimal approximation within a new domain. AUTOPRIV is highly effective as it reduces computational complexity and energy consumption considerably., Comment: 12 pages, 6 figures, 3 tables

Adversarial examples, designed to trick Artificial Neural Networks (ANNs) into producing wrong outputs, highlight vulnerabilities in these models. Exploring these weaknesses is crucial for developing defenses, and so, we propose a method to assess the adversarial robustness of image-classifying ANNs. The t-distributed Stochastic Neighbor Embedding (t-SNE) technique is used for visual inspection, and a metric, which compares the clean and perturbed embeddings, helps pinpoint weak spots in the layers. Analyzing two ANNs on CIFAR-10, one designed by humans and another via NeuroEvolution, we found that differences between clean and perturbed representations emerge early on, in the feature extraction layers, affecting subsequent classification. The findings with our metric are supported by the visual analysis of the t-SNE maps.

Multiple synthetic data generation models have emerged, among which deep learning models have become the vanguard due to their ability to capture the underlying characteristics of the original data. However, the resemblance of the synthetic to the original data raises important questions on the protection of individuals' privacy. As synthetic data is perceived as a means to fully protect personal information, most current related work disregards the impact of re-identification risk. In particular, limited attention has been given to exploring outliers, despite their privacy relevance. In this work, we analyze the privacy of synthetic data w.r.t the outliers. Our main findings suggest that outliers re-identification via linkage attack is feasible and easily achieved. Furthermore, additional safeguards such as differential privacy can prevent re-identification, albeit at the expense of the data utility.

The main science aim of the BlackGEM array is to detect optical counterparts to gravitational wave mergers. Additionally, the array will perform a set of synoptic surveys to detect Local Universe transients and short time-scale variability in stars and binaries, as well as a six-filter all-sky survey down to ~22nd mag. The BlackGEM Phase-I array consists of three optical wide-field unit telescopes. Each unit uses an f/5.5 modified Dall-Kirkham (Harmer-Wynne) design with a triplet corrector lens, and a 65cm primary mirror, coupled with a 110Mpix CCD detector, that provides an instantaneous field-of-view of 2.7~square degrees, sampled at 0.564\arcsec/pixel. The total field-of-view for the array is 8.2 square degrees. Each telescope is equipped with a six-slot filter wheel containing an optimised Sloan set (BG-u, BG-g, BG-r, BG-i, BG-z) and a wider-band 440-720 nm (BG-q) filter. Each unit telescope is independent from the others. Cloud-based data processing is done in real time, and includes a transient-detection routine as well as a full-source optimal-photometry module. BlackGEM has been installed at the ESO La Silla observatory as of October 2019. After a prolonged COVID-19 hiatus, science operations started on April 1, 2023 and will run for five years. Aside from its core scientific program, BlackGEM will give rise to a multitude of additional science cases in multi-colour time-domain astronomy, to the benefit of a variety of topics in astrophysics, such as infant supernovae, luminous red novae, asteroseismology of post-main-sequence objects, (ultracompact) binary stars, and the relation between gravitational wave counterparts and other classes of transients, Comment: Published in PASP

We prove that local stable/unstable sets of homeomorphisms of an infinite compact metric space satisfying the gluing-orbit property always contain compact and perfect subsets of the space. As a consequence, we prove that if a positively countably expansive homeomorphism satisfies the gluing-orbit property, then the space is a single periodic orbit. We also prove that there are homeomorphisms with gluing-orbit such that its induced homeomorphism on the hyperspace of compact subsets does not have gluing-orbit, contrasting with the case of the shadowing and specification properties, proving that if the induced map has gluing-orbit, then the base map has gluing-orbit and is topologically mixing., Comment: 13 pages, 1 figure

Event-triggered control is often argued to lower the average triggering rate compared to time-triggered control while still achieving a desired control goal, e.g., the same performance level. However, this property, often called consistency, cannot be taken for granted and can be hard to analyze in many settings. In particular, although numerous decentralized event-triggered control schemes have been proposed in the past years, their performance properties with respect to time-triggered control remain mostly unexplored. In this paper, we therefore examine the performance properties of event-triggered control (relative to time-triggered control) for a single-integrator consensus problem with a level-triggering rule. We consider the long-term average quadratic deviation from consensus as a performance measure. For this setting, we show that enriching the information the local controllers use improves the performance of the consensus algorithm but renders a previously consistent event-triggered control scheme inconsistent. In addition, we do so while deploying optimal control inputs which we derive for both information cases and all triggering schemes. With this insight, we can furthermore explain the relationship between two contrasting consistency results from the literature on decentralized event-triggered control. We support our theoretical findings with simulation results.

Scientific articles are long text documents organized into sections, each describing aspects of the research. Analyzing scientific production has become progressively challenging due to the increase in the number of available articles. Within this scenario, our approach consisted of fine-tuning transformer language models to generate sentence-level embeddings from scientific articles, considering the following labels: background, objective, methods, results, and conclusion. We trained our models on three datasets with contrastive learning. Two datasets are from the article's abstracts in the computer science and medical domains. Also, we introduce PMC-Sents-FULL, a novel dataset of sentences extracted from the full texts of medical articles. We compare the fine-tuned and baseline models in clustering and classification tasks to evaluate our approach. On average, clustering agreement measures values were five times higher. For the classification measures, in the best-case scenario, we had an average improvement in F1-micro of 30.73\%. Results show that fine-tuning sentence transformers with contrastive learning and using the generated embeddings in downstream tasks is a feasible approach to sentence classification in scientific articles. Our experiment codes are available on GitHub.

Motivated by relativistic materials, we develop a numerical scheme to support existing or state new conjectures in the spectral optimisation of eigenvalues of the Dirac operator, subject to infinite-mass boundary conditions. We study the optimality of the regular polygon (respectively, disk) among all polygons of a given number of sides (respectively, arbitrary sets), subject to area or perimeter constraints. We consider the three lowest positive eigenvalues and their ratios. Roughly, we find results analogous to known or expected for the Dirichlet Laplacian, except for the third eigenvalue which does not need to be minimised by the regular polygon (respectively, the disk) for all masses. In addition to the numerical results, a new, mass-dependent upper bound to the lowest eigenvalue in rectangles is proved and its extension to arbitrary quadrilaterals is conjectured., Comment: 19 pages, 26 figures

Regularization of control policies using entropy can be instrumental in adjusting predictability of real-world systems. Applications benefiting from such approaches range from, e.g., cybersecurity, which aims at maximal unpredictability, to human-robot interaction, where predictable behavior is highly desirable. In this paper, we consider entropy regularization for interval Markov decision processes (IMDPs). IMDPs are uncertain MDPs, where transition probabilities are only known to belong to intervals. Lately, IMDPs have gained significant popularity in the context of abstracting stochastic systems for control design. In this work, we address robust minimization of the linear combination of entropy and a standard cumulative cost in IMDPs, thereby establishing a trade-off between optimality and predictability. We show that optimal deterministic policies exist, and devise a value-iteration algorithm to compute them. The algorithm solves a number of convex programs at each step. Finally, through an illustrative example we show the benefits of penalizing entropy in IMDPs.

We present the first volume-limited sample of spectroscopically confirmed hot subluminous stars out to 500 pc, defined using the accurate parallax measurements from the {\em Gaia} space mission data release 3 (DR3). The sample comprises a total of 397 members, with 305 ($\sim 77\%$) identified as hot subdwarf stars, including 83 newly discovered systems. Of these, we observe that 178 ($\sim58\%$) are hydrogen-rich sdBs, 65 are sdOBs ($\sim 21\%$), 32 are sdOs ($\sim 11\%$), and 30 are He-sdO/Bs ($\sim 10\%$). Among them, 48 ($\sim 16\%$) exhibit an infrared excess in their spectral energy distribution fits, suggesting a composite binary system. The hot subdwarf population is estimated to be 90\% complete, assuming that most missing systems are these composite binaries located within the main sequence (MS) in the \emph{Gaia} colour-magnitude diagram (CMD). The remaining sources in the sample include cataclysmic variables (CVs), blue horizontal branch stars (BHBs), hot white dwarfs (WDs), and MS stars. We derived the mid-plane density $\rho_{0}$ and scale height $\mathrm{h}_{z}$ for the non-composite hot subdwarf star population using a hyperbolic sechant profile (sech$^2$). The best-fit values are $\rho_{0}\,=\,5.17\pm 0.33 \times10^{-7}$ stars/pc$^{3}$ and $\mathrm{h}_{z} = 281 \pm 62$ pc. When accounting for the composite-colour hot subdwarfs and their estimated completeness, the mid-plane density increases to $\rho_{0}\,=\,6.15^ {+1.16}_{-0.53} \times10^{-7}$ stars/pc$^{3}$. This corrected space density is an order of magnitude lower than predicted by population synthesis studies, supporting previous observational estimates., Comment: Accepted for publication with A&A (permission has been granted by A&A to share this article on arXiv), 30 pages, 16 figures, 7 tables (4 + 3 appendices). The full table will be available in electronic form at the CDS

Since 2018, when the Transformer architecture was introduced, Natural Language Processing has gained significant momentum with pre-trained Transformer-based models that can be fine-tuned for various tasks. Most models are pre-trained on large English corpora, making them less applicable to other languages, such as Brazilian Portuguese. In our research, we identified two models pre-trained in Brazilian Portuguese (BERTimbau and PTT5) and two multilingual models (mBERT and mT5). BERTimbau and mBERT use only the Encoder module, while PTT5 and mT5 use both the Encoder and Decoder. Our study aimed to evaluate their performance on a financial Named Entity Recognition (NER) task and determine the computational requirements for fine-tuning and inference. To this end, we developed the Brazilian Financial NER (BraFiNER) dataset, comprising sentences from Brazilian banks' earnings calls transcripts annotated using a weakly supervised approach. Additionally, we introduced a novel approach that reframes the token classification task as a text generation problem. After fine-tuning the models, we evaluated them using performance and error metrics. Our findings reveal that BERT-based models consistently outperform T5-based models. While the multilingual models exhibit comparable macro F1-scores, BERTimbau demonstrates superior performance over PTT5. In terms of error metrics, BERTimbau outperforms the other models. We also observed that PTT5 and mT5 generated sentences with changes in monetary and percentage values, highlighting the importance of accuracy and consistency in the financial domain. Our findings provide insights into the differing performance of BERT- and T5-based models for the NER task.

Approximately 150 low-mass white dwarfs, with masses below 0.4Msun, have been discovered. The majority of these low-mass WDs are observed in binary systems as they cannot be formed through single-star evolution within the Hubble time. In this study, we present a comprehensive analysis of the double low-mass WD eclipsing binary system J2102-4145. Our investigation involved an extensive observational campaign, resulting in the acquisition of approximately 28 hours of high-speed photometric data across multiple nights using NTT/ULTRACAM, SOAR/Goodman, and SMARTS-1m telescopes. These observations have provided critical insights into the orbital characteristics of this system, including parameters such as inclination and orbital period. To disentangle the binary components of J2102-4145, we employed the XT GRID spectral fitting method with GMOS/Gemini-South and X-Shooter data. Additionally, we used the PHOEBE package for light curve analysis on NTT/ULTRACAM high-speed time-series photometry data to constrain the binary star properties. Our analysis reveals remarkable similarities between the two components of this binary system. For the primary star, we determined Teff1 = 13688 +- 65 K, log g1 = 7.36 +- 0.01, R1 = 0.0211 +- 0.0002 Rsun, and M1 = 0.375 +- 0.003 Msun, while the secondary star is characterized by Teff2 = 12952 +- 53 K, log g2 = 7.32 +- 0.01, R2 = 0.0203 +- 0.0002 Rsun, and M2 = 0.31 +- 0.003 Msun. Furthermore, we observe a notable discrepancy between Teff and R of the less massive WD compared to evolutionary sequences for WDs from the literature, which has significant implications for our understanding of WD evolution. We discuss a potential formation scenario for this system that might explain this discrepancy and explore its future evolution. We predict that this system will merge in about 800 Myr, evolving into a helium-rich hot subdwarf star and later into a hybrid He/CO WD.

Reproducibility is widely acknowledged as a fundamental principle in scientific research. Currently, the scientific community grapples with numerous challenges associated with reproducibility, often referred to as the ''reproducibility crisis.'' This crisis permeated numerous scientific disciplines. In this study, we examined the factors in scientific practices that might contribute to this lack of reproducibility. Significant focus is placed on the prevalent integration of computation in research, which can sometimes function as a black box in published papers. Our study primarily focuses on highperformance computing (HPC), which presents unique reproducibility challenges. This paper provides a comprehensive review of these concerns and potential solutions. Furthermore, we discuss the critical role of reproducible research in advancing science and identifying persisting issues within the field of HPC.

Pseudo-Random Number Generators (PRNGs) have become ubiquitous in machine learning technologies because they are interesting for numerous methods. The field of machine learning holds the potential for substantial advancements across various domains, as exemplified by recent breakthroughs in Large Language Models (LLMs). However, despite the growing interest, persistent concerns include issues related to reproducibility and energy consumption. Reproducibility is crucial for robust scientific inquiry and explainability, while energy efficiency underscores the imperative to conserve finite global resources. This study delves into the investigation of whether the leading Pseudo-Random Number Generators (PRNGs) employed in machine learning languages, libraries, and frameworks uphold statistical quality and numerical reproducibility when compared to the original C implementation of the respective PRNG algorithms. Additionally, we aim to evaluate the time efficiency and energy consumption of various implementations. Our experiments encompass Python, NumPy, TensorFlow, and PyTorch, utilizing the Mersenne Twister, PCG, and Philox algorithms. Remarkably, we verified that the temporal performance of machine learning technologies closely aligns with that of C-based implementations, with instances of achieving even superior performances. On the other hand, it is noteworthy that ML technologies consumed only 10% more energy than their C-implementation counterparts. However, while statistical quality was found to be comparable, achieving numerical reproducibility across different platforms for identical seeds and algorithms was not achieved., Comment: 20 pages, 10 tables, 1 figure

The Mersenne Twister (MT) is a pseudo-random number generator (PRNG) widely used in High Performance Computing for parallel stochastic simulations. We aim to assess the quality of common parallelization techniques used to generate large streams of MT pseudo-random numbers. We compare three techniques: sequence splitting, random spacing and MT indexed sequence. The TestU01 Big Crush battery is used to evaluate the quality of 4096 streams for each technique on three different hardware configurations. Surprisingly, all techniques exhibited almost 30% of defects with no technique showing better quality than the others. While all 106 Big Crush tests showed failures, the failure rate was limited to a small number of tests (maximum of 6 tests failed per stream, resulting in over 94% success rate). Thanks to 33 CPU years, high-quality streams identified are given. They can be used for sensitive parallel simulations such as nuclear medicine and precise high-energy physics applications., Comment: 14 pages, 3 tables, 2 figures. To be published in Winter Simulation Conference 2023. (Accepted paper, already presented at conf) Publication by ACM/IEEE should happen soon. We revised the layout

For QFTs in AdS the boundary correlation functions remain conformal even if the bulk theory has a scale. This allows one to constrain RG flows with numerical conformal bootstrap methods. We apply this idea to flows between two-dimensional CFTs, focusing on deformations of the tricritical and ordinary Ising model. We provide non-perturbative constraints for the boundary correlation functions of these flows and compare them with conformal perturbation theory in the vicinity of the fixed points. We also reproduce a completely general constraint on the sign of the $T\bar T$ deformation in two dimensions., Comment: 43+37 pages, 22 figures+1 anteater, 1 ancillary notebook. v2: published version

This comprehensive study delves into the intricate interplay between protons and organic polymers, offering insights into proton therapy in cancer treatment. Focusing on the influence of the spatial electron density distribution on stopping power estimates, we employed time-dependent density functional theory (TDDFT), coupled with the Penn method. Surprisingly, the assumption of electron density homogeneity in polymers is fundamentally flawed, resulting in an overestimation of stopping power values at energies below 2 MeV, approximately. Moreover, Bragg's rule application in specific compounds exhibited significant deviations from experimental data in the Bragg peak region, challenging established norms., Comment: 8 pages, 7 figures, research article

In this work we initiate a positive semi-definite numerical bootstrap program for multi-point correlators. Considering six-point functions of operators on a line we reformulate the crossing symmetry equation for a pair of comb-channel expansions as a semi-definite programming problem. We provide two alternative formulations of this problem. At least one of them turns out to be amenable to numerical implementation. Through a combination of analytical and numerical techniques we obtain rigorous bounds on CFT data in the triple-twist channel for several examples., Comment: 45 pages + appendices, 13 figures; v2: added references, minor clarifications and details on numerical implementation, matches JHEP version

In this article, we provide an overview of the latest intelligent techniques used for processing business rules. We have conducted a comprehensive survey of the relevant literature on robot process automation, with a specific focus on machine learning and other intelligent approaches. Additionally, we have examined the top vendors in the market and their leading solutions to tackle this issue., Comment: 6 pages, 3 figures

AM CVn-type systems are ultracompact, helium-accreting binary systems which are evolutionarily linked to the progenitors of thermonuclear supernovae and are expected to be strong Galactic sources of gravitational waves detectable to upcoming space-based interferometers. AM CVn binaries with orbital periods $\lesssim$ 20--23 min exist in a constant high state with a permanently ionised accretion disc. We present the discovery of TIC 378898110, a bright ($G=14.3$ mag), nearby ($309.3 \pm 1.8$ pc), high-state AM CVn binary discovered in TESS two-minute-cadence photometry. At optical wavelengths this is the third-brightest AM CVn binary known. The photometry of the system shows a 23.07172(6) min periodicity, which is likely to be the `superhump' period and implies an orbital period in the range 22--23 min. There is no detectable spectroscopic variability. The system underwent an unusual, year-long brightening event during which the dominant photometric period changed to a shorter period (constrained to $20.5 \pm 2.0$ min), which we suggest may be evidence for the onset of disc-edge eclipses. The estimated mass transfer rate, $\log (\dot{M} / \mathrm{M_\odot} \mathrm{yr}^{-1}) = -6.8 \pm 1.0$, is unusually high and may suggest a high-mass or thermally inflated donor. The binary is detected as an X-ray source, with a flux of $9.2 ^{+4.2}_{-1.8} \times 10^{-13}$ erg cm$^{-2}$ s$^{-1}$ in the 0.3--10 keV range. TIC 378898110 is the shortest-period binary system discovered with TESS, and its large predicted gravitational-wave amplitude makes it a compelling verification binary for future space-based gravitational wave detectors., Comment: 15 pages, 14 figures. Accepted to MNRAS

We consider a standard discrete-time event-triggered control setting by which a scheduler collocated with the plant's sensors decides when to transmit sensor data to a remote controller collocated with the plant's actuators. When the scheduler transmits periodically with period larger than or equal to one, the $h_\infty$ optimal controller guarantees an optimal attenuation bound ($\ell_2$ gain) from any square-summable disturbance input to a plant's output. We show that, under mild assumptions, there does not exist a controller and scheduler pair that strictly improves the optimal attenuation bound of periodic control with a smaller average transmission rate. Equivalently, given any controller and scheduler pair, there exists a square-summable disturbance such that either the attenuation bound or the average transmission rate are larger than or equal to those of optimal periodic control.

We consider a discrete-time linear system for which the control input is updated at every sampling time, but the state is measured at a slower rate. We allow the state to be sampled according to a periodic schedule, which dictates when the state should be sampled along a period. Given a desired average sampling interval, our goal is to determine sampling schedules that are optimal in the sense that they minimize the $h_2$ or the $h_\infty$ closed-loop norm, under an optimal state-feedback control law. Our results show that, when the desired average sampling interval is an integer, the optimal state sampling turns out to be evenly spaced. This result indicates that, for the $h_2$ and $h_\infty$ performance metrics, there is relatively little benefit to go beyond constant-period sampling.

The direction of individual $^8$B solar neutrinos has been reconstructed using the SNO+ liquid scintillator detector. Prompt, directional Cherenkov light was separated from the slower, isotropic scintillation light using time information, and a maximum likelihood method was used to reconstruct the direction of individual scattered electrons. A clear directional signal was observed, correlated with the solar angle. The observation was aided by a period of low primary fluor concentration that resulted in a slower scintillator decay time. This is the first time that event-by-event direction reconstruction in high light-yield liquid scintillator has been demonstrated in a large-scale detector., Comment: 6 pages, 6 figures. Accepted manuscript by PRD

Mobile devices have widespread to become the most used piece of technology. Due to their characteristics, they have become major targets for botnet-related malware. FluBot is one example of botnet malware that infects mobile devices. In particular, FluBot is a DNS-based botnet that uses Domain Generation Algorithms (DGA) to establish communication with the Command and Control Server (C2). MONDEO is a multistage mechanism with a flexible design to detect DNS-based botnet malware. MONDEO is lightweight and can be deployed without requiring the deployment of software, agents, or configuration in mobile devices, allowing easy integration in core networks. MONDEO comprises four detection stages: Blacklisting/Whitelisting, Query rate analysis, DGA analysis, and Machine learning evaluation. It was created with the goal of processing streams of packets to identify attacks with high efficiency, in the distinct phases. MONDEO was tested against several datasets to measure its efficiency and performance, being able to achieve high performance with RandomForest classifiers. The implementation is available at github.

This paper revisits the Neonatal Convolutional Neural Network (N-CNN) by optimizing its hyperparameters and evaluating how they affect its classification metrics, explainability and reliability, discussing their potential impact in clinical practice. We have chosen hyperparameters that do not modify the original N-CNN architecture, but mainly modify its learning rate and training regularization. The optimization was done by evaluating the improvement in F1 Score for each hyperparameter individually, and the best hyperparameters were chosen to create a Tuned N-CNN. We also applied soft labels derived from the Neonatal Facial Coding System, proposing a novel approach for training facial expression classification models for neonatal pain assessment. Interestingly, while the Tuned N-CNN results point towards improvements in classification metrics and explainability, these improvements did not directly translate to calibration performance. We believe that such insights might have the potential to contribute to the development of more reliable pain evaluation tools for newborns, aiding healthcare professionals in delivering appropriate interventions and improving patient outcomes., Comment: AICAI 2023 in conjuction with MICCAI

The use of Air traffic management (ATM) simulators for planing and operations can be challenging due to their modelling complexity. This paper presents XALM (eXplainable Active Learning Metamodel), a three-step framework integrating active learning and SHAP (SHapley Additive exPlanations) values into simulation metamodels for supporting ATM decision-making. XALM efficiently uncovers hidden relationships among input and output variables in ATM simulators, those usually of interest in policy analysis. Our experiments show XALM's predictive performance comparable to the XGBoost metamodel with fewer simulations. Additionally, XALM exhibits superior explanatory capabilities compared to non-active learning metamodels. Using the `Mercury' (flight and passenger) ATM simulator, XALM is applied to a real-world scenario in Paris Charles de Gaulle airport, extending an arrival manager's range and scope by analysing six variables. This case study illustrates XALM's effectiveness in enhancing simulation interpretability and understanding variable interactions. By addressing computational challenges and improving explainability, XALM complements traditional simulation-based analyses. Lastly, we discuss two practical approaches for reducing the computational burden of the metamodelling further: we introduce a stopping criterion for active learning based on the inherent uncertainty of the metamodel, and we show how the simulations used for the metamodel can be reused across key performance indicators, thus decreasing the overall number of simulations needed.

Brain age prediction using neuroimaging data has shown great potential as an indicator of overall brain health and successful aging, as well as a disease biomarker. Deep learning models have been established as reliable and efficient brain age estimators, being trained to predict the chronological age of healthy subjects. In this paper, we investigate the impact of a pre-training step on deep learning models for brain age prediction. More precisely, instead of the common approach of pre-training on natural imaging classification, we propose pre-training the models on brain-related tasks, which led to state-of-the-art results in our experiments on ADNI data. Furthermore, we validate the resulting brain age biomarker on images of patients with mild cognitive impairment and Alzheimer's disease. Interestingly, our results indicate that better-performing deep learning models in terms of brain age prediction on healthy patients do not result in more reliable biomarkers., Comment: Accepted at BRACIS 2023

The generation of plausible crystal structures is often the first step in predicting the structure and properties of a material from its chemical composition. Quickly generating and predicting inorganic crystal structures is important for the discovery of new materials, which can target applications such as energy or electronic devices. However, most current methods for crystal structure prediction are computationally expensive, slowing the pace of innovation. Seeding structure prediction algorithms with quality generated candidates can overcome a major bottleneck. Here, we introduce CrystaLLM, a methodology for the versatile generation of crystal structures, based on the autoregressive large language modeling (LLM) of the Crystallographic Information File (CIF) format. Trained on millions of CIF files, CrystaLLM focuses on modeling crystal structures through text. CrystaLLM can produce plausible crystal structures for a wide range of inorganic compounds unseen in training, as demonstrated by ab initio simulations. The integration with predictors of formation energy permits the use of a Monte Carlo Tree Search algorithm to improve the generation of meaningful structures. Our approach challenges conventional representations of crystals, and demonstrates the potential of LLMs for learning effective 'world models' of crystal chemistry, which will lead to accelerated discovery and innovation in materials science., Comment: Added new results and supplementary information

The CYGNO experiment aims at the development of a large gaseous TPC with GEM-based amplification and an optical readout by means of PMTs and scientific CMOS cameras for 3D tracking down to O(keV) energies, for the directional detection of rare events such as low mass Dark Matter and solar neutrino interactions. The largest prototype built so far towards the realisation of the CYGNO experiment demonstrator is the 50 L active volume LIME, with 4 PMTs and a single sCMOS imaging a 33$\times$33 cm\textsuperscript{2} area for 50 cm drift, that has been installed in underground Laboratori Nazionali del Gran Sasso in February 2022. We will illustrate LIME performances as evaluated overground in Laboratori Nazionali di Frascati by means of radioactive X-ray sources, and in particular the detector stability, energy response and energy resolution. We will discuss the MC simulation developed to reproduce the detector response and show the comparison with actual data. We will furthermore examine the background simulation worked out for LIME underground data taking and illustrate the foreseen expected measurement and results in terms of natural and materials intrinsic radioactivity characterisation and measurement of the LNGS underground natural neutron flux. The results that will be obtained by underground LIME installation will be paramount in the optimisation of the CYGNO demonstrator, since this is foreseen to be composed by multiple modules with the same LIME dimensions and characteristics.

As the frontier of machine learning applications moves further into human interaction, multiple concerns arise regarding automated decision-making. Two of the most critical issues are fairness and data privacy. On the one hand, one must guarantee that automated decisions are not biased against certain groups, especially those unprotected or marginalized. On the other hand, one must ensure that the use of personal information fully abides by privacy regulations and that user identities are kept safe. The balance between privacy, fairness, and predictive performance is complex. However, despite their potential societal impact, we still demonstrate a poor understanding of the dynamics between these optimization vectors. In this paper, we study this three-way tension and how the optimization of each vector impacts others, aiming to inform the future development of safe applications. In light of claims that predictive performance and fairness can be jointly optimized, we find this is only possible at the expense of data privacy. Overall, experimental results show that one of the vectors will be penalized regardless of which of the three we optimize. Nonetheless, we find promising avenues for future work in joint optimization solutions, where smaller trade-offs are observed between the three vectors., Comment: 12, 6 figures and 2 tables

Twisted heterostructures of two-dimensional crystals can create a moir\'{e} landscape, which can change the properties of it's parent crystals. However, the reproducibility of manual stacking is far from perfect. Here, the alternated stacking of post-transition metal monochalcogenides and transition metal dichalcogenides in misfit layer compound crystals is used as a moir\'{e} generator. Using X-ray diffraction, the presence of twins with a well-defined small twist angle between them is shown. Due to the twist, the surface electrical potential from the induced ferroelectricity is observed using scanning probe microscopy and electron microscopy.

The biphenylene network (BPN) is a notable achievement in recent fabrication endeavors for conceiving new 2D materials. The stability of its boron nitride counterpart, BN-BPN, has been confirmed through numerical investigations. In this study, we conducted a density functional theory (DFT) analysis to examine the mechanical, electronic, thermodynamic, and optical properties of two other group-III counterparts of BPN: gallium nitride (BPN-GaN) and aluminum nitride (BPN-AlN). Our findings reveal that the band gap values for BPN-GaN and BPN-AlN are 2.3 eV and 3.2 eV, respectively, at the HSE06 level. At the GGA/PBE level, we found band gap values of 1.8 eV and 2.3 eV for BPN-GaN and BPN-AlN, respectively. Phonon calculations and ab initio molecular dynamics (AIMD) simulations suggest that BPN-AlN has good structural and dynamic stabilities. On the other hand, BPN-GaN displayed negative phonon frequencies, suggesting potential instability. Nevertheless, results from AIMD simulations point to its structural integrity with no bond reconstructions at 1000 K. These materials exhibit noteworthy UV activity, presenting promising prospects as UV collectors. The thermodynamic properties reveal that the heat capacity of both BPN-AlN and BPN-GaN increases with temperature, eventually reaching the Dulong-Petit limit at around 800 K. We also performed calculations to determine the elastic stiffness constants, Young's modulus, and Poisson ratio for both BPN-GaN and BPN-AlN, providing valuable insights into their mechanical properties., Comment: Materials Today Communications, 37, 107183, 2023

We develop a semi-analytical model of self-diffusioosmotic transport in active pores, which includes advective transport and the inverse chemical reaction which consumes solute. In previous work (Phys. Rev. Lett. 129, 188003, 2022), we have demonstrated the existence of a spontaneous symmetry breaking in fore-aft symmetric pores that enables them to function as a micropump. We now show that this pumping transition is controlled by three timescales. Two timescales characterize advective and diffusive transport. The third timescale corresponds to how long a solute molecule resides in the pore before being consumed. Introducing asymmetry to the pore (either via the shape or the catalytic coating) reveals a second type of advection-enabled transitions. In asymmetric pores, the flow rate exhibits discontinuous jumps and hysteresis loops upon tuning the parameters that control the asymmetry. This work demonstrates the interconnected roles of shape and catalytic patterning in the dynamics of active pores, and shows how to design a pump for optimum performance.