Search

The discovery of topological semimetals with multifold band crossings has opened up a new and exciting frontier in the field of topological physics. These materials exhibit large Chern numbers, leading to long double Fermi arcs on their surfaces, which are protected by either crystal symmetries or topological order. The impact of these multifold crossings extends beyond surface science, as they are not constrained by the Poincar\'e classification of quasiparticles and only need to respect the crystal symmetry of one of the 1651 magnetic space groups. Consequently, we observe the emergence of free fermionic excitations in solid-state systems that have no high-energy counterparts, protected by non-symmorphic symmetries. In this work, we review the recent theoretical and experimental progress made in the field of multifold topological semimetals. We begin with the theoretical prediction of the so-called multifold fermions and discuss the subsequent discoveries of chiral and magnetic topological semimetals. Several experiments that have realized chiral semimetals in spectroscopic measurements are described, and we discuss the future prospects of this field. These exciting developments have the potential to deepen our understanding of the fundamental properties of quantum matter and inspire new technological applications in the future., Comment: 9 pages, 2 figures

Lattice formation of swirling textures is ubiquitous in solid-state materials, such as a magnetic skyrmion lattice in chiral magnets. In the magnetic skyrmion lattices, their moving states and dynamics under external perturbations are still unrevealed, although a detailed understanding of the dynamics is crucial to realizing spintronic applications, such as magnetic domain-wall racetrack memory. Here, we report in detail on the transient state of a moving magnetic skyrmion lattice in bulk single-crystalline MnSi under alternating current (AC) using small-angle neutron scattering. A rotation and concomitant broadening of the spot width in the azimuthal direction of the magnetic skyrmion reflections originating from the plastic deformation of the magnetic skyrmion lattice were found only at low AC frequencies, whereas above the threshold AC frequency (ft ~ 0.12 Hz) the rotation was not observed, and the spot width becomes sharper. The observed complex response of the magnetic skyrmion reflections can be explained by the change in dislocation density in the magnetic skyrmion lattice. At frequencies higher than ft, the magnetic skyrmions oscillate removing the dislocations, indicating that the dislocation density is controlled by the AC frequency., Comment: 13 pages, 10 figures

We present the development of a new algorithm which combines state-of-the-art energy-dispersive X-ray (EDX) spectroscopy theory and a suitable machine learning formulation for the hyperspectral unmixing of scanning transmission electron microscope EDX spectrum images. The algorithm is based on non-negative matrix factorization (NMF) incorporating a physics-guided factorization model. It optimizes a Poisson likelihood, under additional simplex constraint together with user-chosen sparsity-inducing and smoothing regularizations, and is based on iterative multiplicative updates. The fluorescence of X-rays is fully modeled thanks to state-of-the-art theoretical work. It is shown that the output of the algorithm can be used for a direct chemical quantification. With this approach, it is straightforward to include a priori knowledge on the specimen such as the presence or absence of certain chemical elements in some of its phases. This work is implemented within two open-source Python packages, espm and emtables, which are used here for data simulation, data analysis and quantification. Using simulated data, we demonstrate that incorporating physical modeling in the decomposition helps retrieve meaningful components from spatially and spectrally mixed phases, even when the data are very noisy. For synthetic data with a higher signal, the regularizations yield a tenfold increase in the quality of the reconstructed abundance maps compared to standard NMF. Our approach is further validated on experimental data with a known ground truth, where state-of-the art results are achieved by using prior knowledge about the sample. Our model can be generalized to any other scanning spectroscopy techniques where underlying physical modeling can be linearized., Comment: 30 pages, 4 figures

The control of electron spins in materials that are simultaneously ferromagnetic and insulating opens up a wealth of quantum phenomena in spin-based electronics. Thin films of europium oxide (EuO) are ideal for the generation and manipulation of spin-polarized states, but so far there are no experimental literature reports on the magnetic domain patterns for EuO. However, at these microscopic length scales, magnetic relaxation between the remanent and demagnetized states takes place in any spintronic device. This relaxation process involves displacements of magnetic domain walls and can therefore be strongly influenced by the film structure and thickness. Here we present an investigation of the temperature-dependent behavior of magnetic domains and hysteresis in bulk-like (25 nm) and ultrathin (3 nm) EuO films. Magneto-optical Kerr microscopy is used, a technique that is a valuable tool to explore microscopic features such as spin dynamics and magnetic domain walls. Significant Kerr rotation in EuO led to high-contrast magnetic domain images in thick films, facilitating observation of domain dynamics. The critical temperature (TC) and coercivity shows strong thickness-dependent variations. The analysis and comparison of hysteresis loops and domain imaging in EuO and EuO/Co reveal proximity effect-induced antiferromagnetic coupling of both layers. To elucidate the magnetization reversal dynamics in EuO, micromagnetic simulations using MuMax3 were performed below and above TC. This comprehensive approach aims to comprehend the impact of magnetism and magnetic proximity effect in EuO on the micromagnetic scale, potentially extending its magnetic ordering beyond TC.

Compared to the widely investigated crystalline polymorphs of gallium oxide (Ga2O3), knowledge about its amorphous state is still limited. With the help of a machine-learning interatomic potential, we conducted large-scale atomistic simulations to investigate the glass transition and mechanical behavior of amorphous Ga2O3 (a-Ga2O3). During the quenching simulations, amorphization of gallium oxide melt is observed at ultrahigh cooling rates, including a distinct glass transition. The final densities at room temperature have up to 4% variance compared to experiments. The glass transition temperature is evaluated to range from 1234 K to 1348 K at different cooling rates. Structural analysis of the amorphous structure shows evident similarities in structural properties between a-Ga2O3 and amorphous alumina (a-Al2O3), such as radial distribution function, coordination distribution, and bond angle distribution. An amorphous gallium oxide structure that contains approximately one million atoms is prepared for the tension simulation. A highly plastic behavior is observed at room temperature in the tension simulations, comparable to amorphous alumina. With quantitative characterization methods, we show that a-Ga2O3 can possibly has a higher nucleation rate of localized plastic strain events compared to a-Al2O3, which can increase the material's resistance to shear banding formation during deformation., Comment: 15 pages, 7 figures, under review

The ability to rapidly evaluate materials properties through atomistic simulation approaches is the foundation of many new artificial intelligence-based approaches to materials identification and design. This depends on the availability of accurate descriptions of atomic bonding through various forms of interatomic potentials. We present an efficient, robust platform for calculating materials properties, i.e., APEX, the Alloy Property Explorer. APEX enables the rapid evolution of interatomic potential development and optimization, which is of particular importance in fine-tuning new classes of general AI-based foundation models to forms that are readily applicable to impacting materials development. APEX is an open-source, extendable, and cloud-native platform for material property calculations using a range of atomistic simulation methodologies that effectively manages diverse computational resources and is built upon user-friendly features including automatic results visualization, web-based platforms and NoSQL database client. It is designed for expert and non-specialist users, lowers the barrier to entry for interdisciplinary research within the "AI for Materials" framework. We describe the foundation and use of APEX, as well as provide an example of its application to properties of titanium for a wide-range of bonding descriptions.

Identification of crystal structures is a crucial stage in the exploration of novel functional materials. This procedure is usually time-consuming and can be false-positive or false-negative. This necessitates a significant level of expert proficiency in the field of crystallography and, especially, requires deep experience in perovskite - related structures of hybrid perovskites. Our work is devoted to the machine learning classification of structure types of hybrid lead halides based on available X-ray diffraction data. Here, we proposed a simple approach to quickly identify of dimensionality of inorganic substructures, types of lead halide polyhedra connectivity and structure types using common powder XRD data and ML - decision tree classification model. The average accuracy of our ML algorithm in predicting the dimensionality of inorganic substructure, type of connection of lead halide and inorganic substructure topology by theoretically calculated XRD pattern among 14 most common structure types reaches 0.86+-0.05, 0.827+-0.028 and 0.71+-0.05, respectively. The validation of our decision tree classification ML model on experimental XRD data shows the accuracies of 1.0 and 0.82 for the dimension and structure type prediction. Thus, our approach can significantly simplify and accelerate the interpretation of highly complicated XRD data for hybrid lead halides.

The Boson peak is a universal phenomenon in amorphous solids. It can be observed as an anomalous contribution to the low-temperature heat capacity over the Debye model. Amorphous phase-change materials (PCMs) such as Ge-Sb-Te are a family of poor glass formers with fast crystallization kinetics, being of interest for phase-change memory applications. So far, whether Boson peaks exist in PCMs is unknown and, if they do, their relevance to PCM properties is unclear. Here, we investigate the thermodynamic properties of the pseudo-binary compositions on the tie-line between Ge15Te85 and Ge15Sb85 from a few Kelvins to the liquidus temperatures. Our results demonstrate the evidence of the pronounced Boson peaks in heat capacity below 10 K in the amorphous phase of all compositions. By fitting the data using the Debye model combined with the Einstein model, we can extract the characteristic parameters of the Boson peaks and attribute their origin to the excess vibrational modes of dynamic defects in the amorphous solids. We find that these parameters correlate almost linearly with the Sb-content of the alloys, despite the nonmonotonic behaviors in glass forming abilities. A larger contribution of excess vibrational modes correlates with a larger width of enthalpy relaxation below the glass transition temperature Tg. In a broader context, we show that the correlations of the characteristic parameters of the Boson peaks with Tg and kinetic fragility, vary according to the type of bonding. Specifically, metallic glasses and conventional covalent glasses exhibit distinct patterns of dependence, whereas PCMs manifest characteristics that lie in between. A deeper understanding of the Boson peaks in PCMs holds the promise to enable predictions of material properties at higher temperatures based on features observed in low-temperature heat capacity.

In recent years, a type of topological semimetals (TSMs) that can host new fermions with high-fold degeneracy has attracted considerable interest. Among them, ones with chiral structrue particularly catch our attention. Such chiral high-fold degenerate semimetals always have a larger topological charge and longer Fermi arcs which bringing about some special properties. In this work, we found 147 chiral materials with exotic fermions near Fermi level by high-throughput calculation and screening. We selected some typical examples to analyse its topological properties such as topological surface states (TSSs) and Berry curvature. Our results are helpful to provide a promising platform for exploring the physical properties of chiral fermions and application of chiral TSMs.

A recently discovered kagome antiferromagnet $\rm{Y}_3\rm{Cu}_9(\rm{OH})_{19}\rm{Cl}_8$ has attracted significant interest due to its unique kagome lattice structure and magnetic properties. Two separate studies have proposed distinct sets of exchange interaction parameters for this compound. In this study, we investigate the ground state of the spin-1/2 Heisenberg kagome model with three types of nearest-neighbor exchange interactions under a magnetic field by exact diagonalization using the Lanczos method. We reveal that clear magnetization plateaus at $M/M_{\rm sat}$=1/3, 5/9, and 7/9 are present under both parameter sets, which are identified as magnon crystal states based on their spin structures. Our findings suggest that these plateaus could potentially be experimentally confirmed with magnetization measurements on $\rm{Y}_3\rm{Cu}_9(\rm{OH})_{19}\rm{Cl}_8$ under a magnetic field of approximately 300 T. Due to the uncertainty in the exchange interactions of $\rm{Y}_3\rm{Cu}_9(\rm{OH})_{19}\rm{Cl}_8$, we perform additional calculations by varying these interactions. Consequently, we discover additional plateau phases at $M/M_{\rm sat}$=1/3, 5/9, and 7/9, each distinctly different from the magnon crystal states.

We introduce a universal methodology for generating and manipulating altermagnetism in two-dimensional (2D) magnetic van der Waals (MvdW) materials through twisting. We find that a key in-plane 2-fold rotational operation can be achieved in a twisted bilayer of any 2D MvdW material, which takes one of all five 2D Bravais lattices, thereby inducing altermagnetism. By choosing the constituent MvdW monolayer with specific symmetry, our approach can tailor altermagnetism of any type, such as $d$-wave, $g$-wave, and $i$-wave. Furthermore, the properties of our twisted altermagnetic materials can be easily engineered. Taking a transition-metal oxyhalide VOBr as an example, we find that by tuning the twist angle and Fermi level a giant spin Hall angle can be obtained, much larger than the experimentally reported. This approach establishes a general, robust, and adjustable platform to explore altermagnetism, and provides a new efficient way to generate and manipulate the spin current.

Transition-metal dichalcogenides (TMDs) show unique physical, optical, and electronic properties. The known phases of TMDs are 2H and 3R in bulk form, 1T and associated reconstructions, and 1H in monolayer form. This paper reports a hypothetical phase, 9R, that may exist in TMDs (Mo, W)(S, Se, Te)$_2$, meeting both dynamical stability and elastic stability criteria. 9R phase has the same space group as 3R, $i.e.$ rhombohedral $R3m$ without inversion symmetry, and has 9 layers in a conventional unit cell. We find that 9R has an energy within 1 meV per formula unit of 3R and can be energetically favored by a particular strain condition. We further calculate the electronic, elastic, piezoelectric, Raman, and second-harmonic generation signatures of 9R TMDs and compare them with the corresponding 2H and 3R phases. 9R has similar properties to 3R but shows distinctive Raman peaks in the low-frequency regime, improved piezoelectric properties, and unique band splitting arising from layer coupling at the conduction band minimum. These distinct properties make 9R an attractive candidate for applications in piezotronics and valleytronics., Comment: 28 pages, 12 figures, 7 tables

Quantitative analysis of microstructural features on the nanoscale, including precipitates, local chemical orderings (LCOs) or structural defects (e.g. stacking faults) plays a pivotal role in understanding the mechanical and physical responses of engineering materials. Atom probe tomography (APT), known for its exceptional combination of chemical sensitivity and sub-nanometer resolution, primarily identifies microstructures through compositional segregations. However, this fails when there is no significant segregation, as can be the case for LCOs and stacking faults. Here, we introduce a 3D deep learning approach, AtomNet, designed to process APT point cloud data at the single-atom level for nanoscale microstructure extraction, simultaneously considering compositional and structural information. AtomNet is showcased in segmenting L12-type nanoprecipitates from the matrix in an AlLiMg alloy, irrespective of crystallographic orientations, which outperforms previous methods. AtomNet also allows for 3D imaging of L10-type LCOs in an AuCu alloy, a challenging task for conventional analysis due to their small size and subtle compositional differences. Finally, we demonstrate the use of AtomNet for revealing 2D stacking faults in a Co-based superalloy, without any defected training data, expanding the capabilities of APT for automated exploration of hidden microstructures. AtomNet pushes the boundaries of APT analysis, and holds promise in establishing precise quantitative microstructure-property relationships across a diverse range of metallic materials.

Recently, MnTe was established as an altermagnetic material that hosts spin-polarized electronic bands as well as anomalous transport effects like the anomalous Hall effect. In addition to these effects arising from altermagnetism, MnTe also hosts other magnetoresistance effects. Here, we study the manipulation of the magnetic order by an applied magnetic field and its impact on the electrical resistivity. In particular, we establish which components of anisotropic magnetoresistance are present when the magnetic order is rotated within the hexagonal basal plane. Our experimental results, which are in agreement with our symmetry analysis of the magnetotransport components, showcase the existence of an anisotropic magnetoresistance linked to both the relative orientation of current and magnetic order, as well as crystal and magnetic order.

Antiperovskite nitrides are potential candidates for applications harvesting solar light. With a comprehensive state-of-the-art approach combining hybrid density-functional theory, many-body perturbation theory, the Wannier-Mott model, density-functional perturbation theory, and the Feynman polaron model, we explore excitonic and polaronic effects in X$_3$NA (X: Mg, Ca, Sr, Ba, A = Sb, As). For all of them, we uncover a significant influence of the ionic dielectric screening on the static dielectric constant. Small exciton binding energies, weak electron-phonon coupling, and high charge-carrier mobilities facilitate enhanced charge transport in Mg$_3$NSb, Sr$_3$NSb, and Ba$_3$NSb. Our results highlight the potential of these nitrides as optimal candidates for efficient photovoltaic absorbers.

Liquid metal catalysts (LMCats), primarily molten copper, have demonstrated their efficiency in the chemical vapour deposition (CVD) approach for synthesising high-quality, large-area graphene. However, their high melting temperatures limit broader applications. Reducing the temperature of graphene production on LMCats would lead to a more efficient and cost-effective process. Here, we investigated the effects of alloying copper with a low-melting temperature metal on graphene growth in real-time. We examined a set of liquid copper-gallium alloy systems using two complementary in situ techniques: radiation-mode optical microscopy and synchrotron X-ray reflectivity (XRR). Microscopy observations revealed reduced catalytic activity and graphene quality degradation in compositions with gallium domination. The XRR confirmed the formation of single-layer graphene on alloys with up to 60 wt% of gallium. Additionally, we detected a systematic increase in adsorption height on the alloys' surface, suggesting a weaker graphene adhesion on gallium. These findings propose a trade-off between layer quality and production cost reduction is feasible. Our results offer insights into the CVD synthesis of graphene on bimetallic liquid surfaces and underscore the potential of gallium-copper alloys for enabling the direct transfer of graphene from a liquid substrate, thereby addressing the limitations imposed by high melting temperatures of conventional LMCats.

Trapped materials at the interfaces of two-dimensional heterostructures (HS) lead to reduced coupling between the layers, resulting in degraded optoelectronic performance and device variability. Further, nanobubbles can form at the interface during transfer or after annealing. The question of what is inside a nanobubble, i.e. the trapped material, remains unanswered, limiting the studies and applications of these nanobubble systems. In this work, we report two key advances. Firstly, we quantify the interface quality using RAW-format optical imaging, and distinguish between ideal and non-ideal interfaces. The HS-substrate ratio value is calculated using a transfer matrix model, and is able to detect the presence of trapped layers. The second key advance is identification of water as the trapped material inside a nanobubble. To the best of our knowledge, this is the first study to show that optical imaging alone can quantify interface quality, and find the type of trapped material inside spontaneously formed nanobubbles. We also define a quality index parameter to quantify the interface quality of HS. Quantitative measurement of the interface will help answer the question whether annealing is necessary during HS preparation, and will enable creation of complex HS with small twist angles. Identification of the trapped materials will pave the way towards using nanobubbles for novel optical and engineering applications.

Nosocomial infections (NIs) are prevalent in intensive care units due to antibiotic overuse. Metal oxide nanoparticles (NPs), like ZnO, offer potential solutions, yet understanding how NPs size impacts their antibacterial efficacy are lacking. This study focuses on the effect of nanoparticle size on kinetics of bacterial strains growth. NPs were synthesized using a sol-gel process with monoethanolamine (MEA) and water, characterized using X-ray diffraction (XRD), transmission electron microscopy (TEM), and Raman spectroscopy, confirming crystallization and size variations. ZnO NPs with mean size of 22, 35 and 66 nm were used against the most common nosocomial bacteria strains Escherichia coli (Gram-negative), Pseudomonas aeruginosa (Gram-negative), and Staphylococcus aureus (Gram-positive). The evaluation of NPs minimal inhibitory concentration (MIC) and bactericidal concentration (MBC) revealed superior antibacterial activity in smaller NPs. The bacterial population was monitored via optical absorbance, showing reduced specific growth rate, prolonged latency period, and increased inhibition percentage with smaller NPs, indicating a substantial deceleration in the growth of microorganisms. Pseudomonas aeruginosa exhibited the smallest sensitivity to ZnO NPs, attributed to its environmental stress resistance. Furthermore, the antibacterial efficacy of paint containing 1 wt% of 22 nm ZnO NPs was assessed and displayed activity against E. coli and S. aureus.

One-dimensional (1D) interacting electrons are often described as a Luttinger liquid1-4 having properties that are intrinsically different from Fermi liquids in higher dimensions5,6. 1D electrons in materials systems exhibit exotic quantum phenomena that can be tuned by both intra- and inter-1D-chain electronic interactions, but their experimental characterization can be challenging. Here we demonstrate that layer-stacking domain walls (DWs) in van der Waals heterostructures form a broadly tunable Luttinger liquid system including both isolated and coupled arrays. We have imaged the evolution of DW Luttinger liquids under different interaction regimes tuned by electron density using a novel scanning tunneling microscopy (STM) technique. Single DWs at low carrier density are highly susceptible to Wigner crystallization consistent with a spin-incoherent Luttinger liquid, while at intermediate densities dimerized Wigner crystals form due to an enhanced magneto-elastic coupling. Periodic arrays of DWs exhibit an interplay between intra- and inter-chain interactions that gives rise to new quantum phases. At low electron densities inter-chain interactions are dominant and induce a 2D electron crystal composed of phased-locked 1D Wigner crystal in a staggered configuration. Increased electron density causes intra-chain fluctuation potentials to dominate, leading to an electronic smectic liquid crystal phase where electrons are ordered with algebraical correlation decay along the chain direction but disordered between chains. Our work shows that layer-stacking DWs in 2D heterostructures offers new opportunities to explore Luttinger liquid physics.

Here we report on an elastic and inelastic neutron scattering study addressing the effect of electric fields on quantum paraelectric SrTiO3. Our elastic scattering results find small changes as a function of field in a superlattice reflection that sample the octahedral rotations, which is indicative of only weak coupling of octahedral rotation and electric polarization. By collecting not only the change in gap, but also of the dispersion, we can better quantify the changes in the lattice dynamics. The findings are put in context to recent field DFT calculations predicting the E-field effect on the atomic motions of the lowest lying transverse optical (soft) mode. We find hints of non-linear coupling to the acoustic mode and to the phonon with polarization perpendicular to the E-field, which shows the non-linearity in the chemical potential that is also relevant when strongly driving SrTiO3 with E-field (THz) pulses.