Search

Quantum nuclear effects (QNEs) can significantly alter a material's crystal structure and phonon spectra, impacting properties such as thermal conductivity and superconductivity. However, predicting a priori whether these effects will enhance or suppress superconductivity, or destabilize a structure, remains a grand challenge. Herein, we address this unresolved problem by introducing a descriptor, based upon the integrated crystal orbital bonding index (iCOBI), to predict the influence of QNEs on a crystal lattice's dynamic stability, phonon spectra and superconducting properties. We find that structures with atoms in symmetric chemical bonding environments exhibit greater resilience to structural perturbations induced by QNEs, while those with atoms in asymmetric bonding environments are more susceptible to structural alterations, resulting in enhanced superconducting critical temperatures.

In recent years, orientationally disordered crystals, or plastic crystals, have transformed the field of solid-state cooling due to the significant latent heat and entropy changes associated with their temperature induced molecular order-disorder phase transition, which can produce colossal caloric effects under external field stimuli. However, the molecular mechanisms underlying these huge caloric effects remain inadequately understood, and general principles for enhancing the performance of caloric plastic crystals are lacking. Previous studies have predominantly focused on molecular rotations, overlooking other potentially critical factors, such as lattice vibrations and molecular conformations. In this study, we employ classical molecular dynamics (MD) simulations to both replicate and elucidate the microscopic origins of the experimentally observed colossal barocaloric (BC) effects -- those driven by hydrostatic pressure -- in the archetypal plastic crystal neopentyl glycol (NPG). Our MD simulations demonstrate that in NPG, the combined BC response and phase-transition entropy changes arising from lattice vibrations and molecular conformations are nearly equal to those from molecular reorientations, contributing 45% and 55%, respectively. These findings suggest that, alongside hydrogen bonding -- which directly impacts molecular rotational dynamics -- lattice vibrational and molecular structural features, often overlooked, must be integrated into the rational design and modeling of advanced caloric plastic crystals. These insights are not only of significant fundamental interest but also essential for driving the development of next-generation solid-state refrigeration technologies., Comment: 13 pages, 7 figures

Vacancy-ordered double perovskites (VODPs) are promising alternatives to three-dimensional lead halide perovskites for optoelectronic and photovoltaic applications. Mixing these materials creates a vast compositional space, allowing for highly tunable electronic and optical properties. However, the extensive chemical landscape poses significant challenges in efficiently screening candidates with target properties. In this study, we illustrate the diversity of electronic and optical characteristics as well as the nonlinear mixing effects on electronic structures within mixed VODPs. For mixed systems with limited local environment options, the information regarding atomic-site occupation in-principle determines both structural configurations and all essential properties. Building upon this concept, we have developed a model that integrates a data-augmentation scheme with a transformer-inspired graph neural network (GNN), which encodes atomic-site information from mixed systems. This approach enables us to accurately predict band gaps and formation energies for test samples, achieving Root Mean Square Errors (RMSE) of 21 meV and 3.9 meV/atom, respectively. Trained with datasets that include (up to) ternary mixed systems and supercells with less than 72 atoms, our model can be generalized to medium- and high-entropy mixed VODPs (with 4 to 6 principal mixing elements) and large supercells containing more than 200 atoms. Furthermore, our model successfully reproduces experimentally observed bandgap bowing in Sn-based mixed VODPs and reveals an unconventional mixing effect that can result in smaller band gaps compared to those found in pristine systems., Comment: 22 pages, 9 figures

We propose a non-collinear spin-constrained method that generates training data for deep-learning-based magnetic model, which provides a powerful tool for studying complex magnetic phenomena at the atomic scale. First, we propose a projection method for atomic magnetic moments by applying a radial truncation to the numerical atomic orbitals. We then implement a Lagrange multiplier method that can yield the magnetic torques of atoms by constraining the magnitude and direction of atomic magnetic moments. The method is implemented in ABACUS with both plane wave basis and numerical atomic orbital basis. We benchmark the iron (Fe) systems with the new method and analyze differences from calculations with the plane wave basis and numerical atomic orbitals basis in describing magnetic energy barriers. Based on more than 30,000 first-principles data with the information of magnetic torque, we train a deep-learning-based magnetic model DeePSPIN for the Fe system. By utilizing the model in large-scale molecular dynamics simulations, we successfully predict Curie temperatures of $\alpha$-Fe close to experimental values.

Zinc phosphorus trisulfide (ZnPS$_3$), a promising material for photocatalysis and energy storage, is shown in this study to exhibit remarkable stability under extreme conditions. We explore its optical and structural properties under high pressure and cryogenic temperatures using photoluminescence (PL) spectroscopy, Raman scattering, and density functional theory (DFT). Our results identify a pressure-induced phase transition starting at 6.75 GPa and stabilizing by 12.5 GPa, after which ZnPS$_3$ demonstrates robust stability across a broad pressure range of 15 to 100 GPa. DFT calculations predict a semiconductor-to-semimetal transition at 100 GPa, while PL measurements reveal defect-assisted emissions that quench under pressure due to enhanced non-radiative recombination. At cryogenic temperatures, PL quenching intensifies as non-radiative processes dominate, driven by a rising Gr\"uneisen parameter and reduced phonon population. Cryogenic X-ray diffraction (XRD) also reveals a high mean thermal expansion coefficient (TEC) of (4.369 $\pm$ 0.393) $\times$ 10$^{-5}$ K$^{-1}$, among the highest reported for 2D materials. This unique combination of tunable electronic properties under low pressure and high thermal sensitivity makes ZnPS$_3$ a strong candidate for sensing applications in extreme environments.

Rare earth chalcogenides provide a great platform to study exotic quantum phenomena such as superconductivity and charge density waves. Among various interesting properties, the coupling between magnetism and electronic transport has attracted significant attention. Here, we report the investigation of such coupling in {alpha}-Gd2Se3 single crystals through magnetic, calorimetric, and transport property measurements. {alpha}-Gd2Se3 is found to display an antiferromagnetic ground state below 11 K with metamagnetic spin-flop transitions. The magnetic fluctuations remain strong above the transition temperature. Transport measurements reveal an overall metallic transport behavior with a large negative magnetoresistance of ~ 65% near the magnetic transition temperature, together with positive MR near the field-induced spin-flop transitions, which can be understood in terms of the suppression of spin scattering by the magnetic field., Comment: 13 Pages, 5 figures, 1 Table

We present a physics-informed deep learning framework to address common limitations in Confocal Laser Scanning Microscopy (CLSM), such as diffraction limited resolution, noise, and undersampling due to low laser power conditions. The optical system's point spread function (PSF) and common CLSM image degradation mechanisms namely photon shot noise, dark current noise, motion blur, speckle noise, and undersampling were modeled and were directly included into model architecture. The model reconstructs high fidelity images from heavily noisy inputs by using convolutional and transposed convolutional layers. Following the advances in compressed sensing, our approach significantly reduces data acquisition requirements without compromising image resolution. The proposed method was extensively evaluated on simulated CLSM images of diverse structures, including lipid droplets, neuronal networks, and fibrillar systems. Comparisons with traditional deconvolution algorithms such as Richardson-Lucy (RL), non-negative least squares (NNLS), and other methods like Total Variation (TV) regularization, Wiener filtering, and Wavelet denoising demonstrate the superiority of the network in restoring fine structural details with high fidelity. Assessment metrics like Structural Similarity Index (SSIM) and Peak Signal to Noise Ratio (PSNR), underlines that the AdaptivePhysicsAutoencoder achieved robust image enhancement across diverse CLSM conditions, helping faster acquisition, reduced photodamage, and reliable performance in low light and sparse sampling scenarios holding promise for applications in live cell imaging, dynamic biological studies, and high throughput material characterization.

A comprehensive study on thermomechanical processing of pure Mg was conducted through sequential hot extrusion, hot rolling, and cold drawing operations. Three different extrusion ratios (6:1, 25:1, and 39:1) were investigated at 350{\deg}C, revealing that 39:1 ratio produced an optimal bimodal grain structure with beneficial twin morphology. Subsequently, hot rolling experiments were performed at varying linear speeds (26- and 130-mm s-1) and interpass annealing times (2.5 and 10 minutes). Results demonstrated that higher rolling speeds led to finer microstructure, while longer interpass annealing times resulted in reduced twin fraction and more inhomogeneous microstructure. The processed material was then subjected to cold drawing with approximately 12% true strain per pass. Different annealing conditions (275{\deg}C and 375{\deg}C for 2.5-10 minutes) between drawing passes were evaluated. Analysis showed that annealing at 375{\deg}C for 2.5-5 minutes provided optimal softening for subsequent deformation. Fracture analysis revealed a mixed ductile-brittle behavior, with twin-matrix interfaces serving as preferred crack propagation paths This study establishes optimal processing parameters for pure Mg wire production, highlighting the critical role of twin characteristics and restoration processes in determining material formability during multi-step thermomechanical processing., Comment: 13 International Conference on Materials engineering and Metallurgy-Karaj, Iran

Recent terahertz-pump second-harmonic-generation(SHG)-probe measurements of quantum paraelectrics observed a significant long-lived non-oscillatory SHG component following an ultrafast resonant excitation of the soft mode, which was interpreted as a signature of terahertz-induced transient ferroelectric order. Here we propose a temperature-dependent dynamic model incorporating the hot-phonon effect to simulate the soft-mode behaviors under ultrafast terahertz excitation. Its application to paraelectric KTaO3 produces quantitatively most of the features exhibited in our time-resolved SHG measurements and those in existing literature, including a long-lived non-oscillatory SHG response, SHG oscillations at twice the soft-mode frequency, SHG dampings as well as temperature and field-strength dependencies. We conclude that the observed terahertz-induced non-oscillatory SHG response in quantum paraelectrics is a consequence of the induced nonequilibrium hot-phonon effect, offering an alternative to its existing interpretation as a signature of transient ferroelectric order.

We develop Monte Carlo simulations for uniformly charged polymers and machine learning algorithm to interpret the intra-polymer structure factor of the charged polymer system, which can be obtained from small-angle scattering experiments. The polymer is modeled as a chain of fixed-length bonds, where the connected bonds are subject to bending energy, and there is also a screened Coulomb potential for charge interaction between all joints. The bending energy is determined by the intrinsic bending stiffness, and the charge interaction depends on the interaction strength and screening length. All three contribute to the stiffness of the polymer chain and lead to longer and larger polymer conformations. The screening length also introduces a second length scale for the polymer besides the bending persistence length. To obtain the inverse mapping from the structure factor to these polymer conformation and energy-related parameters, we generate a large data set of structure factors by running simulations for a wide range of polymer energy parameters. We use principal component analysis to investigate the intra-polymer structure factors and determine the feasibility of the inversion using the nearest neighbor distance. We employ Gaussian process regression to achieve the inverse mapping and extract the characteristic parameters of polymers from the structure factor with low relative error., Comment: 8 pages, 8 figures

Compared to traditional superhard materials with high electron density and strong covalent bonds, alloy materials mainly composed of metallic bonding structures typically have great toughness and lower hardness. Breaking through the limits of alloy materials is a preface and long term topic, which is of great significance and value for improving the comprehensive mechanical properties of alloy materials. Here, we report on the discovery of a cubic alloy semiconducting material Ti2Co with large Vickers of hardness Hvexp = 6.7 GPa and low fracture toughness of KICexp =1.51 MPa m0.5. Unexpectedly, the former value is nearly triple of the Hvcal = 2.66 GPa predicted by density functional theory (DFT) calculations and the latter value is about one or two orders of magnitude smaller than that of ordinary titanium alloy materials (KICexp = 30-120 MPa m0.5).These specifications place Ti2Co far from the phase space of the known alloy materials, but close to medium hardness materials such as MgO or TiO2. Upon incorporation of oxygen into structural void positions, both values were simultaneously improved for Ti4Co2O to = 9.7 GPa and 2.19 MPa m0.5, respectively. Further DFT calculations on the electron localization function of Ti4Co2X (X = B, C, N, O) vs. the interstitial elements indicate that these simultaneous improvements originate from the coexistence of Ti-Co metallic bonds, the emergence of newly oriented Ti-X covalent bonds, and the increase of electron concentration. Moreover, the large difference between Hvexp and Hvcal of Ti2Co suggests underlying mechanism concerning the absence of the O(16d) or Ti2-O bonds in the O-(Ti2)6 octahedron.Our discovery expands the phase space of alloy materials and illuminates the path of exploring superconducting materials with excellent mechanical performances., Comment: 17 pages, 4 figures

We present the low-temperature magnetic properties of two Yb$^{3+}$-based triangular lattice compounds NaSrYb(BO$_3$)$_2$ and K$_3$YbSi$_2$O$_7$ via thermodynamic measurements followed by crystal electric field (CEF) calculations. Magnetization and specific heat data as well as the CEF energy levels confirm that the ground state is characterized by the low-lying Kramers' doublet of Yb$^{3+}$ with effective spin-1/2 ($J_{\rm eff} = 1/2$). A small Curie-Weiss temperature and scaling of magnetic isotherms corroborate very weak magnetic correlations among $J_{\rm eff} = 1/2$ spins. The crystal field parameters are calculated using the point charge model and the CEF Hamiltonian is determined for both the compounds. The simulation using the eigenvalues of the CEF Hamiltonian reproduces the experimental susceptibility, magnetic isotherm, and magnetic specific heat data very well. The large separation between the ground state and first excited state doublets implies that the ground state is a Kramers' doublet with $J_{\rm eff} = 1/2$ at low temperatures, endorsing the experimental findings., Comment: 13 pages, 9 figures, 6 tables

Recently, the Ruddlesden-Popper bilayer nickelate La3Ni2O7 has been discovered as a high temperature superconductor with Tc near 80 K above 14 GPa.[1-3] The search for nickelate superconductors with higher Tc, the preparation of high-quality single crystals, and the removal of high-pressure conditions including single crystal growth under high gas pressure and achievement of high Tc superconductivity under high pressure, are the most challenging tasks. Here, we present ambient pressure flux growth of high-quality bilayer nickelate single crystals with superconductivity up to 91 K under high pressure. Single crystals of bilayer La3-xRxNi2O7-y with dimensions up to 220 um on the edge were successfully grown using flux method at atmosphere conditions. Single crystal X-ray diffraction, nuclear quadrupole resonance, energy dispersion spectroscopy and scanning transmission electron microscopy measurements evidenced high quality of bilayer La2SmNi2O7-y single crystals in average structure and local structure. Superconductivity has been observed in high pressure resistivity measurements of annealed La2SmNi2O7-y single crystals with Tc onset up to 91 K, which is the highest among the known superconducting nickelates. Our results not only demonstrate a new and easy-to-access method for synthesizing high-quality bilayer nickelate single crystals, but also providing a direction for discovering superconducting nickelates with higher Tc., Comment: 4 figures and 1 table

Nickelates have attracted enormous attention since the discovery of high-temperature superconductivity in La3Ni2O7 under high pressure. However, whether superconducting nickelate single crystals can be prepared at ambient pressure remains elusive. Here we report signature of superconductivity in pressurized La4Ni3O10-x single crystals grown from potassium carbonate flux at ambient pressure. Single crystal X-ray diffraction and scanning transmission electron microscopy investigations re-vealed high-quality single crystals with perfect stacking of trilayers. Resistivity measurements indicate that the metal-to-metal transition observed at ambient pressure was suppressed under high pressure, and a sharp drop occurred at ~30 K at 77.9 GPa, consistent with superconductivity in pressurized La4Ni3O10 single crystals grown by the floating zone method at an oxygen pressure of >18 bar. Our results not only provide an important path to prepare high-quality nickelate single crystals but also support superconductivity in nickelates under high pressure, promoting more systematic and in-depth research in this compelling field., Comment: 3 figures

The increasing threat of uranium contamination to environmental and human health due to its radiotoxicity demands the development of novel and efficient adsorbents for remediation. In this study, we investigated the potential of poly(amidoamine) (PAMAM) dendrimers of generations 1 to 4 (G1 - G4) functionalized with graphene and carbon nanotubes (CNTs) as adsorbents for uranyl ion removal from aqueous solutions. By combining atomistic molecular dynamics (MD) simulations with experimental validation, we examined the influence of pH, uranyl ion concentration, and dendrimer generation on adsorption behavior. Our study revealed that uranyl ion adsorption is greater when PAMAM is grafted onto graphene/CNT than pristine PAMAM. However, PAMAM-grafted CNTs exhibit superior adsorption capacity at specific uranyl concentrations due to their curvature and abundant accessible binding sites. Higher-generation PAMAM dendrimers grafted onto graphene/CNTs exhibit greater adsorption capacity due to the increased availability of binding sites, which is consistent with experimental observations. The adsorption capability of uranyl ions in all four generations of the PAMAM dendrimer increased as the concentration of uranyl ions increased. Adsorption capacity increases with increasing uranyl ion concentration, and adsorption occurs on both PAMAM and graphene/CNT surfaces, with saturation observed at higher concentrations. This study provides insights into the adsorption mechanisms and highlights the potential of PAMAM-based nanocomposites for efficient uranyl ion extraction and environmental remediation.

This paper presents a thermal characterization of salt mixtures applying the T-History Method and the Differential Scanning Calorimetry DSC techniques. By using water as a standard substance, the original T-History method was developed to analyze materials with melting points under 100 Celsius. This is the first research that proposes to replace water by glycerin to characterize medium melting temperature PCMs from 140 to 220 Celsius. Moreover, the DSC technique was used to validate and compare the results obtained with the T-history method for each mixture. For instance, the system compound of 40 KNO$_3$ to 60 NaNO$_3$ was studied, and the enthalpy of fusion determined by THM and DSC differs by 2.1% between each method. The results given by the two methods for all mixtures showed that both techniques are complementary and present satisfactory agreement with the specialized literature., Comment: 11 pages, 5 figures, 2 tables, research article

The realization of two-dimensional multiferroics offers significant potential for nanoscale device functionality. However, type-I two-dimensional multiferroics with strong magnetoelectric coupling, enabling electric field control of spin, remain scarce. In this study, using density functional theory and Monte Carlo simulations, we predict that the niobium phthalocyanine covalent organic framework (NbPc COF) monolayer exhibits type-I multiferroic behavior, with a ferroelectric transition occurring above room temperature. Remarkably, the strong magnetoelectric coupling in NbPc COF monolayer arises from the same origin of magnetism and ferroelectricity. Our findings offer flexible pathways for the design and development of organic nanoscale multiferroic devices with broad applications., Comment: 12 pages, 5 figures

External pressure suppresses the ferromagnetism of localized Cr 3d electron moments in the van der Waals insulator CrBr3, which cannot be explained without considering a dramatic pressure-induced crystal or electronic structure change. We addressed this issue by conducting a parallel experimental investigation of single crystals magnetic and structural properties using magnetization, X-ray diffraction, and Raman spectroscopy measurements. Ab initio DFT calculations of electronic structure and atomistic simulations of finite-temperature magnetism supported the analysis and interpretation of experimental results. The magnetization measurements at high pressures provided the first direct experimental evidence of the pressure-induced suppression of ferromagnetism. We observed a gradual decrease of the bulk magnetic moment and Curie temperature with increasing pressure, which accelerates at pressures above 3 GPa, leading to loss of ferromagnetism at 6.5 GPa. By increasing pressure, the ambient pressure phase gradually breaks down and is accompanied by the generation of layer stacking that favor the antiferromagnetic coupling of Cr moments. As a result, the appearing antiparallel pairs of moments disturb the ferromagnetic structure and reduce the bulk magnetic moment and Curie temperature. This scenario, which is well corroborated by the results of our theoretical calculations, suggests an antiferromagnetic phase emerging with increasing pressure beyond the critical value when the new single trigonal P-3m1 phase becomes stable, characterized by the "antiferromagnetic" A-A layer stacking, becomes stable. The weak coupling between adjacent magnetic layers in van der Waals materials allows variations in layering due to sufficient external forces. We hope our comprehensive study's results can help other researchers resolve frequently appearing issues of similar origin in this class of materials.

This work presents a selective ultraviolet (UV)-ozone oxidation-chemical etching process that has been used, in combination with laser interference lithography (LIL), for the preparation of GaAs patterned substrates. Further molecular beam epitaxy (MBE) growth of InAs results in ordered InAs/GaAs quantum dot (QD) arrays with high optical quality from the first layer of QDs formed on the patterned substrate. The main result is the development of a patterning technology that allows the engineering of customized geometrical displays of QDs with the same optical quality as those formed spontaneously on flat non-patterned substrates., Comment: 7 pages, 4 figures

We present experimental evidence of Sb incorporation inside InAs/GaA(001) quantum dots exposed to an antimony flux immediately before capping with GaAs. The Sb composition profile inside the nanostructures as measured by cross-sectional scanning tunneling and electron transmission microscopies show two differentiated regions within the quantum dots, with an Sb rich alloy at the tip of the quantum dots. Atomic force microscopy and transmission electron microscopy micrographs show increased quantum-dot height with Sb flux exposure. The evolution of the reflection high-energy electron-diffraction pattern suggests that the increased height is due to changes in the quantum-dot capping process related to the presence of segregated Sb atoms. These structural and compositional changes result in a shift of the room-temperature photoluminescence emission from 1.26 to 1.36 microns accompanied by an order of magnitude increase in the room-temperature quantum-dot luminescence intensity., Comment: 16 pages, 11 figures

In this work, we explore a method for obtaining site-controlled InAs quantum dots (QDs) on large areas of GaAs (0 0 1) pre-patterned surface. The patterning of the substrate is obtained by using a monolithically integrated nano-channel alumina (NCA) mask and transferring its self-ordering to the underlying GaAs substrate by continuing the anodization process once the GaAs surface is reached. After patterning, the GaAs substrate follows a low temperature process for surface preparation before epitaxial growth for QD formation. As a final result, we observe that the nanoholes act as preferential nucleation sites for InAs QD formation, with a filling factor close to unity, while the QD formation on the surface region between the pattern holes is completely suppressed., Comment: 8 pages, 6 figures

Disordered fibrous matrices, formed by the random assembly of fibers, provide the structural framework for many biological systems and biomaterials. Applied deformation modifies the alignment and stress states of constituent fibers, tuning the nonlinear elastic response of these materials. While it is generally presumed that fibers return to their original configurations after deformation is released, except when neighboring fibers coalesce or individual fibers yield, this reversal process remains largely unexplored. The intricate geometry of these matrices leaves an incomplete understanding of whether releasing deformation fully restores the matrix or introduces new microstructural deformation mechanisms. To address this gap, we investigated the evolution of matrix microstructures during the release of an applied deformation. Numerical simulations were performed on quasi-two-dimensional matrices of random fibers under localized tension, with fibers modeled as beams in finite element analysis. After tension release, the matrix exhibited permanent mechanical remodeling, with greater remodeling occurring at higher magnitudes of applied tension, indicative of the matrix preserving its loading history as mechanical memory. This response was surprising; it occurred despite the absence of explicit plasticity mechanisms, such as activation of inter-fiber cohesion or fiber yielding. We attributed the observed remodeling to the gradient in fiber alignment that developed within the matrix microstructure under applied tension, driving the subsequent changes in matrix properties during the release of applied tension. Therefore, random fibrous matrices tend to retain mechanical memory due to their intricate geometry.

Linear magnon-phonon coupling hybridizes magnon and phonon bands at the same energy and momentum, resulting in an anticrossing signature.This hybrid quasiparticle benefits from a long phonon lifetime and efficient magnon transport, showing great potential for spintronics and quantum information science applications.In this paper, we present an efficient and accurate first-principles approach for calculating linear magnon-phonon couplings.We first calculate the magnon spectra from linear spin wave theory with spin Hamiltonian and first-principles exchange constants, which compared well with time-dependent density-functional theory.We then obtain the magnon-phonon coupling from the derivative of off-diagonal exchange constants in real space, calculated from the Hellmann-Feynman forces of the spin-constrained configurations, avoiding the use of cumbersome finite-difference methods.Our implementation allows calculating coupling coefficients at an arbitrary wave vector in the Brillouin zone in a single step, through Fourier interpolation of real-space supercell calculations. We verify our implementation through two-dimensional magnetic systems, monolayer $\mathrm{CrI_3}$, in agreement with experiments, and extend its application to monolayer $\mathrm{CrTe_2}$. We emphasize the role of nonmagnetic atoms in superexchange interactions and magnon-phonon coupling, which have been overlooked previously. We suggest effective tuning of magnon-phonon coupling through strain, doping, and terahertz excitations, for spintronics and quantum magnonics applications.

Controlling/storing information carriers, such as electron charge and spin, is key for modern information society, and significant efforts have been paid made to establish novel technologies at the nanoscale. The rise of Si-based semiconductor technology and magnetism-based technology has been motivated by the aforementioned demands. However, both technologies have been individually developed, with little effort in fusing them. Hence, establishing a technology to bridge semiconductor and magnetism-based technologies that would allow realization of a novel information device is strongly awaited. In line with this research strategy, the creation of a magnetic device using semiconductors would enable fundamental innovation. Here, we show that a mother material for modern electronics, Si, gives rise to a giant room-temperature orbital Hall effect (OHE), enabling the creation of novel energy-efficient magnetic memory via efficient torque generation. The orbital torque efficiency largely exceeds that of the archetypal metallic materials used in the OHE. Our achievement overtures the conventional understanding that nonmagnetic semiconductors cannot play a pivotal role in magnetic devices and paves a new avenue for creating novel information devices through the fusion of semiconductor and magnetism-based technologies., Comment: 24 pages, 5 figures

The pressure-induced high-temperature superconductivity(Tc) in nickelates La3Ni2O7-x has sparked significant interest to explore its superconductivity at ambient pressure.Lan+1NinO3n+1(n=2,3)adopts an orthorhombic structure with tilted NiO6 octahedra and undergoes a spin-density-wave(SDW) transition at ambient pressure, while the octahedral tilting and the SDW are suppressed by pressure, and high pressure induces a structural transition from orthorhombic to tetragonal, and the high-Tc superconductivity is achieved in the tetragonal structure. This tetragonal structure is widely believed to be crucial for the pressure-induced superconductivity. Whether the pressure-stabilized tetragonal structure is a prerequisite for achieving nickelate superconductivity at ambient pressure is under hot debate. Here, by post-annealing of the orthorhombic La3Ni2O7-x as grown microcrystals with noticeable oxygen defects in high oxygen pressure environment, tetragonal La3Ni2O6.96 single crystals are successfully obtained at ambient pressure. In contrast to the orthorhombic La3Ni2O7-x, the tetragonal La3Ni2O7-x exhibits metallic behavior without a SDW transition at ambient pressure. Moreover, no superconductivity is observed at high pressure up to ~ 70 GPa. On the other hand, by utilizing Helium as the pressure medium, we have revisited the superconducting structure in pressurized orthorhombic La3Ni2O6.93. Our results indicate that the orthorhombic structure is quite robust against pressure, and no structural transition from orthorhombic to tetragonal happens, and the superconductivity under high pressure is achieved in orthorhombic structure rather than tetragonal structure claimed previously. All these results suggest that tetragonal structure is not prerequisite for achieving superconductivity in La3Ni2O7-x., Comment: 20 pages, 4 figures

Mg$_3$Sb$_2$ is a promising thermoelectric material that consists of nontoxic and earth-abundant elements. We investigate metallic-atom diffusion in Mg$_3$Sb$_2$ by calculating the defect formation energy and the diffusion energy barrier for several kinds of metallic-atom impurities. We find that early transition metals, including $4d$ elements, with a large atomic radius have a high defect formation energy, whereas Mg and late transition metals such as Ni, Cu, and Zn have relatively low formation energies as interstitial impurities. Interstitial Ni, which is found to have a very low defect formation energy, might diffuse in the $ab$ plane at high temperatures with the energy barrier of 0.7 eV, while it seems difficult to diffuse in the $c$ direction. Interstitial Cu has a higher defect formation energy than Ni but has a low energy barrier of $\sim$0.4 eV for diffusion in the $ab$ plane. This study will offer important knowledge for developing a thermoelectric device of Mg$_3$Sb$_2$., Comment: 7 pages, 5 figures

Spin-orbit torque (SOT) has been extensively studied as a key mechanism in spintronics applications. However, conventional SOT materials limit the spin polarization direction to the in-plane orientation, which is suboptimal for efficient magnetization switching. Recently, spins currents with spin polarization along multiple directions have been observed in low-symmetry materials, offering a promising energy-efficient strategy for the field-free switching of magnetic materials with perpendicular magnetic anisotropy. However, the efficiency of this mechanism is highly dependent on the crystallographic texture of the SOT materials, a critical factor that, to date, has not been quantitatively investigated. In this study, we present the first comprehensive numerical investigation into the impact of both in-plane and out-of-plane crystallographic textures of SOT materials on the unconventional SOT generated by Dresselhaus-like and out-of-plane spin polarizations. By employing a theoretical orientation distribution function, we calculate the effective unconventional SOT values for SOT materials with tunable crystallographic texture. This analysis provides a framework for the synthesis and optimization of future low-symmetry SOT materials for the first time, which can enhance operational efficiency for spintronics applications in magnetoresistive random-access memory and spin logic devices., Comment: This work has been submitted to the IEEE for possible publication

Atomically thin, single-crystalline transition metal dichalcogenides (TMDCs) grown via chemical vapor deposition (CVD) on sapphire substrates exhibit exceptional mechanical and electrical properties, positioning them as excellent channel materials for flexible electronics. However, conventional wet-transfer processes for integrating these materials onto flexible substrates often introduce surface contamination, significantly degrading device performance. Here, we present a wafer-scale dry-transfer technique using a high-dielectric oxide as the transfer medium, enabling the integration of 4-inch single-crystalline MoS$_2$ onto flexible substrates. This method eliminates contact with polymers or solvents, thus preserving the intrinsic electronic properties of MoS$_2$. As a result, the fabricated flexible field-effect transistor (FET) arrays exhibit remarkable performance, with a mobility of 117 cm$^2$/Vs, a subthreshold swing of 68.8 mV dec$^{-1}$, and an ultra-high current on/off ratio of $10^{12}$-values comparable to those achieved on rigid substrates. Leveraging the outstanding electrical characteristics, we demonstrated MoS$_2$-based flexible inverters operating in the subthreshold regime, achieving both a high gain of 218 and ultra-low power consumption of 1.4 pW/$\mu$m. Additionally, we integrated a flexible tactile sensing system driven by active-matrix MoS$_2$ FET arrays onto a robotic gripper, enabling real-time object identification. These findings demonstrate the simultaneous achievement of high electrical performance and flexibility, highlighting the immense potential of single-crystalline TMDC-based flexible electronics for real-world applications.

Graphene Oxide (GO) remains a perennial chemical enigma despite its utility in preparing graphene and its functionalization. Epoxides and tertiary alcohols are construed as primary functional groups, but the structural motifs, spectra, and physicochemical properties remain largely inexplicable. Our graph theoretic perturbational analysis of introducing defects (sp3 carbons) on graphene shows the induction of sextets that topologically force 1, 4-quinoidal channels. Edge defects minimize these, whose propagation is halted by vertex anti-defects. Molecular models show that epoxidation creates a diradical centered on two cove-end carbons due to close-lying frontier orbitals. This drives the cascade addition of hydroxides, yielding the 1:2 ratio of epoxides and hydroxides. This nanostructure accounts for the cation exchange, acidity, anionic nature of GO, and topological conditions that break its sigma framework. The simulated spectra of a 2D sheet with this nanostructure correlate pleasantly with experiments, emphasizing the dominant role of sextet topology on the surface chemistry of graphene., Comment: 14 pages, 7 figures

We establish, as $\rho\to 0$, an asymptotic expansion for the minimal Dirichlet energy of $\mathbb S^2$-valued maps outside a finite number of three-dimensional particles of size $\rho$ with fixed centers $x_j\in\mathbb{R}^3$, under general anchoring conditions at the particle boundaries. Up to a scaling factor, this expansion is of the form \begin{align*} E_\rho = \sum_j \mu_j -4\pi\rho \sum_{i\neq j} \frac{\langle v_i,v_j\rangle}{|x_i-x_j|} +o(\rho)\,, \end{align*} where $\mu_j$ is the minimal energy after zooming in at scale $\rho$ around each particle, and $v_j\in\mathbb{R}^3$ is a torque determined by the far-field behavior of the corresponding single-particle minimizer. The above expansion highlights Coulomb-like interactions between the particle centers. This agrees with the \textit{electrostatics analogy} commonly used in the physics literature for colloid interactions in nematic liquid crystal. That analogy was pioneered by Brochard and de Gennes in 1970, based on a formal linearization argument. We obtain here for the first time a precise estimate of the energy error introduced by this linearization procedure., Comment: 46 pages, 2 figures

As the atomistic simulations of materials science move from traditional potentials to machine learning interatomic potential (MLIP), the field is entering the second phase focused on discovering and explaining new material phenomena. While MLIP development relies on curated data and flexible datasets from ab-initio simulations, transitioning seamlessly between ab-initio workflows and MLIP frameworks remains challenging. A global survey was conducted to understand the current standing (progress and bottleneck) of the machine learning-guided materials science research. The survey responses have been implemented to design an open-source software to reduce the access barriers of MLIP models for the global scientific community. Here, we present AtomProNet, an open-source Python package that automates obtaining atomic structures, prepares and submits ab-initio jobs, and efficiently collects batch-processed data for streamlined neural network (NN) training. Finally, we compared empirical and start-of-the-art machine learning potential, showing the practicality of using MLIPs based on computational time and resources.

The role of grain size in determining fracture toughness in metals is incompletely understood with apparently contradictory experimental observations. We study this grain-size dependence computationally by building a model that combines the phase-field formulation of fracture mechanics with dislocation density-based crystal plasticity. We apply the model to cleavage fracture of body-centered cubic materials in plane strain conditions, and find non-monotonic grain-size dependence of plastic-brittle transgranular fracture. We find two mechanisms at play. The first is the nucleation of failure due to cross-slip in critically located grains within transgranular band of localized deformation, and this follows the classical Hall-Petch law that predicts a higher failure stress for smaller grains. The second is the resistance to the propagation of a mode I crack, where grain boundaries can potentially pin a crack, and this follows an inverse Hall-Petch law with higher toughness for larger grains. The result of the competition between the two mechanisms gives rise to non-monotonic behavior and reconciles the apparently contradictory experimental observations.

Accurately predicting electronic band gaps in halide perovskites using ab initio density functional theory (DFT) is essential for their application in optoelectronic devices. Standard hybrid functionals such as HSE and PBE0 can overcome the limitations of DFT with reasonable computational cost but are known to underestimate the measured band gaps for layered halide perovskites. In this study, we assess the performance of the doubly screened dielectric-dependent hybrid (DSH) functional for predicting band gaps in three-dimensional (3D) and layered hybrid perovskites. We show that the DSH functional, which employs material-dependent mixing parameters derived from macroscopic dielectric constants, provides accurate band gap predictions for 3D halide perovskites when structural local disorder is considered. For layered hybrid perovskites, DSH functional based on average dielectric constants overestimates the band gaps. To improve the predictions and stay in a parameter-free ab initio workflow, we propose to use the calculated dielectric constant of the respective 3D perovskites. We find that the DSH functionals using the dielectric constants of the 3D perovskite accurately predict experimental gaps, with the lowest mean absolute errors compared to HSE and PBE0 for layered perovskites with various organic spacers, as well as for multilayered $BA_2MA_{n-1}Pb_{n}I_{3n-1}$ with n = 2, 3. Notably, the HSE functional systematically underestimates the band gaps in layered perovskites. We attribute the root of this failure to the absence of non-local long-range dielectric screening, a critical factor for halide perovskites. The computational framework introduced here provides an efficient parameter-free ab initio methodology for predicting the electronic properties of 3D and layered halide perovskites and their heterostructures, aiding in developing advanced optoelectronic devices.

Magnetic measurements under high-pressure conditions are pivotal for the study of superconductivity and magnetic materials but remain challenging due to the micrometer-sized sample in diamond anvil cells (DAC). In this study, we propose a quantum sensing approach utilizing negatively charged boron-vacancy (V$_B^-$) spin defects in two-dimensional hexagonal boron nitride for high resolution magnetic measurements under pressure. The optical and spin properties of VB$^-$ defects were systematically studied under high-pressure conditions, revealing a significant pressure-induced shift in zero-field splitting (ZFS), approximately three times larger than that of nitrogen-vacancy (NV) center. Furthermore, we demonstrate the pressure-dependent magnetic transition and variations in the Curie temperature of van der Waals ferromagnet Fe$_3$GeTe$_2$ flake using V$_B^-$ defects under pressures. Notably, the maximum operational pressure for V$_B^-$ defects was determined to be approximately 11 GPa, attributed to a structural phase transition in hexagonal boron nitride (hBN). This work establishes the way for two-dimensional quantum sensing technologies under high-pressure environments.

To lessen the quick depletion of fossil fuels and the resulting environmental harm, it is necessary to investigate effective and eco-friendly materials that can convert lost energy into electricity. The structural, optical, electronic, thermo-electric, and thermodynamic properties of the novel half-Heusler (HH) material NaVTe were examined in the current work using density functional theory (DFT). The Birch-Murnaghan equations of states were used to confirm the structural stability of the NaVTe HH alloy under investigation. These equations show that the compound in question has structural stability because its ground-state energy levels are negative. For spin-down configurations, NaVTe possesses an energy band gap of 3.2 eV, according to band structure and total density of state analysis. NaVTe is a material that is desirable for optoelectronic applications due to its optical features, which include maximum conductivity and absorption of electromagnetic radiation. The figure of merit and other thermodynamic and thermoelectric parameters are calculated. According to these predicted outcomes, the NaVTe HH alloy would be the ideal option for thermo-electric and renewable energy applications., Comment: arXiv admin note: text overlap with arXiv:2409.09735

Indium Arsenide is a III-V semiconductor with low electron effective mass, a small band gap, strong spin-orbit coupling, and a large g-factor. These properties and its surface Fermi level pinned in the conduction band make InAs a good candidate for developing superconducting solid-state quantum devices. Here, we report the epitaxial growth of very thin InAs layers with thicknesses ranging from 12.5 nm to 500 nm grown by Molecular Beam Epitaxy on InxAl1-xAs metamorphic buffers. Differently than InAs substrates, these buffers have the advantage of being insulating at cryogenic temperatures, which allows for multiple device operations on the same wafer and thus making the approach scalable. The structural properties of the InAs layers were investigated by high-resolution X-ray diffraction, demonstrating the high crystal quality of the InAs layers. Furthermore, their transport properties, such as total and sheet carrier concentration, sheet resistance, and carrier mobility, were measured in the van der Pauw configuration at room temperature. A simple conduction model was employed to quantify the surface, bulk, and interface contributions to the overall carrier concentration and mobility.

Altermagnetism has attracted considerable attention for its remarkable combination of spin-polarized band structures and zero net magnetization, making it a promising candidate for spintronics applications. We demonstrate that this magnetic phase represents a case of ``unconventional magnetism," first proposed nearly two decades ago by one of the present authors as part of a broader framework for understanding Landau-Pomeranchuk instabilities in the spin channel, driven by many-body interactions. By systematically analyzing the altermagnetism in RuO$_2$ with first-principles calculations, we reconcile conflicting experimental and theoretical reports by attributing it to RuO$_2$'s proximity to a quantum phase transition. We emphasize the critical role of tuning parameters, such as the Hubbard $U$, hole doping, and epitaxial strain, in modulating quasiparticle interactions near the Fermi surface. This work provides fresh insights into the origin and tunability of altermagnetism in RuO$_2$, highlighting its potential as a platform for investigating quantum phase transitions and the broader realm of unconventional magnetism., Comment: 6 pages, 3 fugures

Topologically nontrivial electronic states can give rise to novel anomalous Hall effects. The potential appearance of these effects at room temperature holds promise for their application in magnetic sensing, spintronics, and energy harvesting technology. The anomalous in-plane Hall effect (IPHE) is predicted to arise in topological magnetic materials when an external magnetic field is applied within the sample plane. Because of stringent symmetry requirements, the conclusive detection of the anomalous IPHE induced by topological electronic states remains challenging, and the study of anomalous Hall effects is often confined to cryogenic conditions. Combining molecular beam epitaxy of the kagome metal Fe$_3$Sn with measurements of the electric Hall effect and theoretical calculations, we propose and experimentally demonstrate that the interplay of the kagome lattice motif with spin-orbit coupling and canted ferromagnetism with large exchange interactions gives rise to the anomalous IPHE at room temperature that is induced by topological Weyl points in the electronic band structure. Synthesizing a topological heterostructure including layers of Fe$_3$Sn and ferromagnetic CoFeB, we further show the enhancement of the anomalous IPHE through the magnetic stray field of the CoFeB layer. Our work establishes a design paradigm for topological magnets and heterostructures to discover and control novel anomalous Hall effects toward their use in technological applications.

We investigate the spin Hall conductivity (SHC) of a composition series of a Ta-Re bcc solid solution. At approximately 60 at.% Ta the Ta-Re alloy features an SHC similar to bcc-W, while both endpoints of the compositional series have rather moderate SHC. The intermediate stoichiometries exhibit a substantial enhancement due to Fermi level tuning through the same band structure feature which gives bcc-W and $\beta$-W its large SHC. We provide experimental evidence for the enhancement of the SHC in the alloy via THz emission upon ultrafast laser excitation of Ta-Re/CoFeB bilayers. We demonstrate that a rigid band model derived from bcc-W and Fermi level tuning describes the experimental data with a similar accuracy as coherent potential approximation alloy calculations of the SHC., Comment: 8 pages, 5 figures

We report the results of $^{139}$La NMR measurements in the non-centrosymmetric superconductor LaRhGe$_3$. This material crystallizes in a tetragonal structure without inversion symmetry and exhibits type-I superconductivity below 385 mK. We observed remarkably sharp NMR signals, indicating that the magnetic and electronic properties of the sample are extremely uniform in LaRhGe$_3$ despite the complex crystal structure. Our NMR results indicate that LaRhGe$_3$ is a weakly correlated semimetal in the normal state., Comment: 2 pages, 2 figures

Ultra-thin two-dimensional (2D) materials have gained significant attention for making next-generation optoelectronic devices. Here, we report a large-area heterojunction photodetector fabricated using a liquid metal-printed 2D $\text{SnO}_2$ layer transferred onto CdTe thin films. The resulting device demonstrates efficient broadband light sensing from visible to near-infrared wavelengths, with enhanced detectivity and faster photo response than bare CdTe photodetectors. Significantly, the device shows a nearly $10^5$-fold increase in current than the dark current level when illuminated with a 780 nm laser and achieves a specific detectivity of around $10^{12} \, \text{Jones}$, nearly two orders of magnitude higher than a device with pure CdTe thin film. Additionally, temperature-dependent optoelectronic testing shows that the device maintains a stable response up to $140^\circ \text{C}$ and generates distinctive photocurrent at temperatures up to $80^\circ \text{C}$, demonstrating its thermal stability. Using band structure analysis, density functional theory (DFT) calculations, and photocurrent mapping, the formation of a $p$-$n$ junction is indicated, contributing to the enhanced photo response attributed to the efficient carrier separation by the built-in potential in the hetero-junction and the superior electron mobility of 2D $\text{SnO}_2$. Our results highlight the effectiveness of integrating liquid metal-exfoliated 2D materials for enhanced photodetector performance.

VSe$_2$ is a highly promising van der Waals (vdW) material for applications in electronics, spintronics, and optoelectronics. Here, we report single crystal growth of 1T-VSe$_2$ by flux method using eutectic of NaCl/KCl molten salt. The typical size of as-grown VSe$_2$ single crystals is 5 $\times$ 4 $\times$ 0.1~mm$^3$. The elemental composition and homogeneity of the crystals were examined by energy dispersive x-ray spectroscopy, which is consistent with the stoichiometric ratio of VSe$_2$. The crystallographic [001] direction has been determined by x-ray diffraction. Raman measurement confirms that the 1T phase of VSe$_2$ has been formed. Temperature-dependent resistivity measurement exhibits a transition around 104 K due to the formation of the charge density wave phase., Comment: 4 pages, 5 figures

Single-atom catalysts have attracted significant attention due to their exceptional atomic utilization and high efficiency in a range of catalytic reactions. However, these systems often face thermodynamic instability, leading to agglomeration under operational conditions. In this study, we investigate the interactions of twelve types of catalytic atoms (Fe, Co, Ni, Cu, Ru, Rh, Pd, Ag, Ir, Pt, Au, and Bi) on three crystalline phases (1T, 1T', and 2H) of six transition metal dichalcogenide layers (MoS2, MoSe2, MoTe2, WS2, WSe2, and WTe2) based on first-principles calculations. We ultimately identify 82 stable single-atom systems that thermodynamically prevent the formation of metal clusters on these substrates. Notably, our findings reveal that the metastable 1T and 1T' phases significantly enhance the binding strength with single atoms and promote their thermodynamic stability. This research offers valuable insights into the design of stable single-atom systems and paves the way for discovering innovative catalysts in the future.

Beta-phase gallium oxide (beta-Ga2O3) is prone to the spontaneous formation of donor defects but poses a formidable challenge in achieving high-quality p-type doping, mainly due to its exceptionally low valence band maximum (VBM). In this study, we utilize first-principles computations to investigate the origin of spontaneous donor defects in beta-Ga2O3 grown by three typical techniques: molecular beam epitaxy (MBE), metal organic chemical vapor deposition (MOCVD), and halide vapor phase epitaxy (HVPE). Our findings elucidate that the primary donor defects vary with the growth techniques, specifically Gai3+ for MBE, Hi+ and CGa+ for MOCVD, and (2VGa+Gai+2VO)+ and ClO+ for HVPE under unintentionally doped conditions. Employing a theoretically proposed voltage-assisted doping method, we computationally demonstrate that the dominant spontaneous donors can be significantly reduced accompanied by a noticeable increase in acceptors, leading to a stepwise reduction of Fermi level to 0.52, 0.88, and 2.10 eV above VBM for the MOCVD, HVPE, and MBE methods, and a hole concentration of 8.5*10^17, 8.7*10^11, and 2.7*10^-9 cm-3, respectively, at room temperature without the use of external dopants. By introducing Mg doping, we further reduce the Fermi level for both the MBE and HVPE experiments.

Sodium chloride (NaCl), a ubiquitous and chemically stable compound, has been considered inert under ambient conditions. Its typical B1 structure is highly isotropic without preferential direction, favoring the growth of a three-dimensional network of strong Na-Cl ionic bonds. Here, we employ first-principles structural searching and synchrotron X-ray diffraction to unravel an unexpected chemical reaction between NaCl and N2 to produce a hybrid salt-NaCl(N2)2, where N2 molecules break the isotropic NaCl structure into two-dimensional layers upon synthesis at 50 GPa. In contrast to the insulating properties of pristine NaCl, the electronic bandgap of the N2-stuffed NaCl narrowed to 1.8 eV, becoming an indirect bandgap semiconductor. Further compression to 130 GPa induced the polymerization of N atoms into zigzag N-chains. Our findings not only demonstrate the possibility of unusual N-chemistry under extreme conditions, but also suggest a feasible approach for the design of layered NaCl frameworks to modulate the polymerization of nitrogen., Comment: 9 pages, 3 figures

Excitonic effects in the optical absorption spectra of solids can be described with time-dependent density-functional theory (TDDFT) in the linear-response regime, using a simple class of approximate, long-range corrected (LRC) exchange-correlation functionals. It was recently demonstrated that the LRC approximation can also be employed in real-time TDDFT to describe exciton dynamics. Here, we investigate the numerical stability of the time-dependent LRC approach using a two-dimensional model solid. It is found that the time-dependent Kohn-Sham equation with an LRC vector potential becomes more and more prone to instabilities for increasing exciton binding energies. The origin of these instabilities is traced back to time-averaged violations of the zero-force theorem, which leads to a simple and robust numerical stabilization scheme. This explains and justifies a recently proposed method by Dewhurst et al., arXiv:2401.16140., Comment: 16 pages, 11 figures

Realizing ferromagnetic semiconductors with room Curie temperature $T\rm_C$ remains a challenge in spintronics. Inspired by the recent experimental progress on the nanotubes based on 2D van der Waals non-magnetic transition-metal dichalcogenides, magnetic nanotubes based on monolayer ferromagnetic materials are highly possible. Here, we proposed a way how to obtain high $T\rm_C$ ferromagnetic semiconductor nanotubes. Some high $T\rm_C$ ferromagnetic semiconductors are predicted in the MX$_2$ nanotubes (M = V, Cr, Mn, Fe, Co, Ni; X = S, Se, Te), including CrS$_2$ and CrTe$_2$ zigzag nanotubes with the diameter of 18 unit cells showing $T\rm_C$ above 300 K. In addition, due to the strain gradient in walls of nanotubes, an electrical polarization at level of $0.1$ eV/\AA~inward of the radial direction is obtained. Our results not only present novel ferromagnetic semiconductor nanotubes with room Curie temperature but also be indicative of how to obtain such nanotubes based on experimentally obtained 2D high $T\rm_C$ ferromagnetic metals.

On the kagome lattice, electrons benefit from the simultaneous presence of band topology, flat electronic bands, and van Hove singularities, forming competing or cooperating orders. Understanding the interrelation between these distinct order parameters remains a significant challenge, leaving much of the associated physics unexplored. In the kagome superconductor KV3Sb5, which exhibits a charge density wave (CDW) state below T = 78 K, we uncover an unpredicted field-induced phase transition below 6 K. The observed transition is marked by a hysteretic anomaly in the resistivity, nonlinear electrical transport, and a change in the symmetry of the electronic response as probed via the angular dependence of the magnetoresistivity. These observations surprisingly suggest the emergence of an unanticipated broken symmetry state coexisting with the original CDW. To understand this experimental observation, we developed a theoretical minimal model for the normal state inside the high-temperature parent CDW phase where an incommensurate CDW order emerges as an instability sub-leading to superconductivity. The incommensurate CDW emerges when superconducting fluctuations become fully suppressed by large magnetic fields. Our results suggest that, in kagome superconductors, quantum states can either coexist or are nearly degenerate in energy, indicating that these are rich platforms to expose new correlated phenomena.

This study explores the transformative potential of nanocatalysts, emphasizing their pivotal role in catalysis and material science. Key synthesis techniques, including chemical reduction and hybrid methods, are highlighted for their ability to control particle size and enhance stability. Applications in environmental remediation, fuel quality improvement, and renewable energy showcase the broad impact of nanocatalysts. Despite challenges in scalability and stabilization, advancements in bimetallic configurations and electro-steric approaches demonstrate significant progress. This research underscores nanocatalysts' promise for sustainable industrial processes and global challenges., Comment: 9 pages

Thin-film solid-state metal dealloying (thin-film SSMD) is a promising method for fabricating nanostructures with controlled morphology and efficiency, offering advantages over conventional bulk materials processing methods for integration into practical applications. Although machine learning (ML) has facilitated the design of dealloying systems, the selection of key thermal treatment parameters for nanostructure formation remains largely unknown and dependent on experimental trial and error. To overcome this challenge, a workflow enabling high-throughput characterization of thermal treatment parameters while probing local nanostructures of thin-film samples is needed. In this work, a laser-based thermal treatment is demonstrated to create temperature gradients on single thin-film samples of Nb-Al/Sc and Nb-Al/Cu. This continuous thermal space enables observation of dealloying transitions and the resulting nanostructures of interest. Through synchrotron X-ray multimodal and high-throughput characterization, critical transitions and nanostructures can be rapidly captured and subsequently verified using electron microscopy. The key temperatures driving chemical reactions and morphological evolutions are clearly identified within this framework. While the oxidation process may contribute to nanostructure formation during thin-film treatment, the dealloying process at the dealloying front involves interactions solely between the dealloying elements, highlighting the availability and viability of the selected systems. This approach enables efficient exploration of the dealloying process and validation of ML predictions, thereby accelerating the discovery of thin-film SSMD systems with targeted nanostructures., Comment: The main content contains 6 figures within 25 pages. The supporting information includes 5 figures within 5 pages