Search

After decades of research, superconductivity was finally found in nickel-based analogs of superconducting cuprates, with infinite-layer (IL) structure. These results are so far restricted to thin films in the case of IL-nickelates. Therefore, the nature of the interface with the substrate, and how it couples with the thin film properties is still an open question. Here, using scanning transmission electron microscopy (STEM)- electron energy loss spectroscopy (EELS) and four-dimensional (4D)-STEM, a novel chemically sharp p-type interface is observed in a series of superconducting IL-praseodymium nickelate samples, and a comparative study is carried out with the previously reported n-type interface obtained in other samples. Both interfaces have strong differences, with the p-type interface being highly polar. In combination with ab-initio calculations, we find that the influence of the interface on the electronic structure is local, and does not extend beyond 2-3 unit cells into the thin film. This decouples the direct influence of the interface in driving the superconductivity, and indicates that the IL-nickelate thin films do not have a universal interface model. Insights into the spatial hole-distribution in SC samples, provided by monochromated EELS and total reflection-hard x-ray photoemission spectroscopy, suggest that this particular distribution might be directly influencing superconductivity.

Sliding bilayers are systems that exploit the possibility of relatively translating two monolayers along a specific direction in real space, such that different stackings could be implemented in the process. This simple approach allows for manipulating the electronic properties of layered materials similarly as in twisted multilayers. In this work, the sliding of bilayers, composed of one type of monolayer with spatial symmetry described by space group P$\bar{3}1m$ is studied. Using a minimal tight-binding model along with symmetry analysis, we propose two effects that arise in a specific sliding direction. First, the sliding-induced control of the band gap magnitude, which produces a metal-insulator transition, is demonstrated. In addition, the potential to achieve a topological adiabatic charge pump for cyclic sliding is discussed. For each effect, we also present material implementations using first-principles calculations. Bilayer GaS is selected for the metal-insulator transition and bilayer transition metal dichalcogenide ZrS$_2$ is found to display the topological pump effect. Both realizations show good agreement with the predictions of the model., Comment: 9 pages, 3 figures + Supplementary information

Recent progress in the understanding of the collective behavior of electrons and ions have revealed new types of ferroic orders beyond ferroelectricity and ferromagnetism, such as the ferroaxial state. The latter retains only rotational symmetry around a single axis and reflection symmetry with respect to a single mirror plane, both of which are set by an emergent electric toroidal dipole moment. Due to this unusual symmetry-breaking pattern, it has been challenging to directly measure the ferroaxial order parameter, despite the increasing attention this state has drawn. Here, we show that off-diagonal components of the piezoresistivity tensor (i.e., the linear change in resistivity under strain) transform the same way as the ferroaxial moments, providing a direct probe of such order parameters. We identify two new proper ferroaxial materials through a materials database search, and use first-principles calculations to evaluate the piezoconductivity of the double-perovskite CaSnF$_6$, revealing its connection to ferroaxial order and to octahedral rotation modes.

Version 13 of XtalOpt, an evolutionary algorithm for crystal structure prediction, is now available for download from the CPC program library or the XtalOpt website, https://xtalopt.github.io. In the new version of the XtalOpt code, a general platform for multi-objective global optimization is implemented. This functionality is designed to facilitate the search for (meta)stable phases of functional materials through minimization of the enthalpy of a crystalline system coupled with the simultaneous optimization of any desired properties that are specified by the user. The code is also able to perform a constrained search by filtering the parent pool of structures based on a user-specified feature, while optimizing multiple objectives. Here, we present the implementation and various technical details, and we provide a brief overview of additional improvements that have been introduced in the new version of XtalOpt.

The rapid advancement in artificial intelligence and natural language processing has led to the development of large-scale datasets aimed at benchmarking the performance of machine learning models. Herein, we introduce 'RetChemQA,' a comprehensive benchmark dataset designed to evaluate the capabilities of such models in the domain of reticular chemistry. This dataset includes both single-hop and multi-hop question-answer pairs, encompassing approximately 45,000 Q&As for each type. The questions have been extracted from an extensive corpus of literature containing about 2,530 research papers from publishers including NAS, ACS, RSC, Elsevier, and Nature Publishing Group, among others. The dataset has been generated using OpenAI's GPT-4 Turbo, a cutting-edge model known for its exceptional language understanding and generation capabilities. In addition to the Q&A dataset, we also release a dataset of synthesis conditions extracted from the corpus of literature used in this study. The aim of RetChemQA is to provide a robust platform for the development and evaluation of advanced machine learning algorithms, particularly for the reticular chemistry community. The dataset is structured to reflect the complexities and nuances of real-world scientific discourse, thereby enabling nuanced performance assessments across a variety of tasks. The dataset is available at the following link: https://github.com/nakulrampal/RetChemQA

Direct access to transition state energies at low computational cost unlocks the possibility of accelerating catalyst discovery. We show that the top performing graph neural network potential trained on the OC20 dataset, a related but different task, is able to find transition states energetically similar (within 0.1 eV) to density functional theory (DFT) 91% of the time with a 28x speedup. This speaks to the generalizability of the models, having never been explicitly trained on reactions, the machine learned potential approximates the potential energy surface well enough to be performant for this auxiliary task. We introduce the Open Catalyst 2020 Nudged Elastic Band (OC20NEB) dataset, which is made of 932 DFT nudged elastic band calculations, to benchmark machine learned model performance on transition state energies. To demonstrate the efficacy of this approach, we replicated a well-known, large reaction network with 61 intermediates and 174 dissociation reactions at DFT resolution (40 meV). In this case of dense NEB enumeration, we realize even more computational cost savings and used just 12 GPU days of compute, where DFT would have taken 52 GPU years, a 1500x speedup. Similar searches for complete reaction networks could become routine using the approach presented here. Finally, we replicated an ammonia synthesis activity volcano and systematically found lower energy configurations of the transition states and intermediates on six stepped unary surfaces. This scalable approach offers a more complete treatment of configurational space to improve and accelerate catalyst discovery., Comment: 50 pages, 15 figures, submitted to Nature Catalysis

Fragile topology, akin to twisted bilayer graphene and the exotic phases therein, is a notable topological class with intriguing properties. However, due to its unique nature and the lack of bulk-edge correspondence, the experimental signature of fragile topology has been under debated since its birth. Here, we demonstrate experimentally that fragile topological phases with filling anomaly can be probed via screw dislocations, despite that they do not support gapless edge states. Using a designer hexagonal phononic crystal with a fragile topological band gap, we find that 1D gapless bound modes can emerge at a screw dislocation due to the bulk fragile topology. We then establish a connection between our system and the twisted boundary condition via the gauge invariance principle and illustrate that such an emergent phenomenon is an intrinsic property of fragile topological phases with filling anomaly. We observe experimentally the 1D topological bound states using the pump-probe measurements of their dispersion and wavefunctions, which unveils a novel bulk-defect correspondence of fragile topology and a powerful tool for probing fragile topological phases and materials., Comment: Submitted to Science Bulletin

Cu$_x$Al$_{1-x}$ thin films with $0.2 \le x \le 0.7$ have been studied as potential alternatives for the metallization of advanced interconnects. First-principles simulations were used to obtain the Cu$_x$Al$_{1-x}$ electronic structure and cohesive energy to benchmark different intermetallics and their prospects for interconnect metallization. Next, thin Cu$_x$Al$_{1-x}$ films were deposited by PVD with thicknesses in the range between 3 and 28 nm. The lowest resistivities of 9.5 $\mu\Omega$cm were obtained for 28 nm thick stochiometric CuAl and CuAl$_2$ after 400$^\circ$C post-deposition annealing. Based on the experimental results, we discuss the main challenges for the studied aluminides from an interconnect point of view, namely the control of the film stoichiometry, the phase separation observed for off-stoichiometric CuAl and CuAl$_2$, as well as the presence of a nonstoichiometric surface oxide., Comment: 24 pages, 7 figures

Materials that transition between metal and insulator, the two opposing states that distinguish all solids, are fascinating because they underlie many mysteries in the physics of the solid state. In 1T-TaS$_{2}$, the metal-insulator transition is linked to a series of metastable states of a chiral charge density wave whose basic nature is still an open question. In this work, we show that pulses of current through these materials create current-carrying boundary channels that distinguish the metallic and insulating states. We demonstrate electrical control of these channels' properties, suggesting their formation could be due to the complex interplay of the formation of domain walls and the viscous flow of electrons. Our findings show that physical boundaries play a key role in the properties of the metastable states of the metal-insulator transition, highlighting new possibilities for in-situ electrical design and active manipulation of electrical components.

A new method for dark field imaging is introduced which uses scanned electron diffraction (or 4DSTEM - 4-dimensional scanning transmission electron microscopy datasets) as its input. Instead of working on simple summation of intensity, it works on a sparse representation of the diffraction patterns in terms of a list of their diffraction peaks. This is tested on a thin perovskite film containing structural ordering resulting in additional superlattice spots that reveal details of domain structures, and is shown to give much better selectivity and contrast than conventional virtual dark field imaging. It is also shown to work well in polycrystalline aggregates of CuO nanoparticles. In view of the higher contrast and selectivity, and the complete exclusion of diffuse scattering from the image formation, it is expected to be of significant benefit for characterisation of a wide variety of crystalline materials.