Search

In this paper, we illustrate the consequences and implications of the Dual Model of Liquids (DML) by applying it to heat propagation.

The industrial application of Deep Reinforcement Learning (DRL) is frequently slowed down because of the inability to generate the experience required to train the models. Collecting data often involves considerable time and economic effort that is unaffordable in most cases. Fortunately, devices like robots can be trained with synthetic experience thanks to virtual environments. With this approach, the sample efficiency problems of artificial agents are mitigated, but another issue arises: the need for efficiently transferring the synthetic experience into the real world (sim-to-real). This paper analyzes the robustness of a state-of-the-art sim-to-real technique known as progressive neural networks (PNNs) and studies how adding diversity to the synthetic experience can complement it. To better understand the drivers that lead to a lack of robustness, the robotic agent is still tested in a virtual environment to ensure total control on the divergence between the simulated and real models. The results show that a PNN-like agent exhibits a substantial decrease in its robustness at the beginning of the real training phase. Randomizing certain variables during simulation-based training significantly mitigates this issue. On average, the increase in the model's accuracy is around 25% when diversity is introduced in the training process. This improvement can be translated into a decrease in the required real experience for the same final robustness performance. Notwithstanding, adding real experience to agents should still be beneficial regardless of the quality of the virtual experience fed into the agent., Comment: This article was accepted and published in Applied Intelligence (10.1007/s10489-022-04227-3)

We classify the global dynamics of the five-parameter family of planar Kolmogorov systems \begin{equation*} \begin{split} \dot{y}&=y \left( b_0+ b_1 y z + b_2 y + b_3 z\right), \dot{z}&=z\left( c_0 + b_1 y z + b_2 y + b_3 z\right), \end{split} \end{equation*} which is obtained from the Lotka-Volterra systems of dimension three. These systems have infinitely many singular points at inifnity. We give the topological classification of their phase portraits in the Poincar\'e disc, so we can describe the dynamics of these systems near infinity. We prove that these systems have 13 topologically distinct global phase portraits.

To support the growing demand for data-intensive and low-latency IoT applications, Multi-Access Edge Computing (MEC) is emerging as an effective edge-computing approach enabling the execution of delay-sensitive processing tasks close to end-users. However, most of the existing works on resource allocation and service placement in MEC systems overlook the unique characteristics of new IoT use cases. For instance, many IoT applications require the periodic execution of computing tasks on real-time data streams that originate from devices dispersed over a wide area. Thus, users requesting IoT services are typically distant from the data producers. To fill this gap, the contribution of this work is two-fold. Firstly, we propose a MEC-compliant architectural solution to support the operation of multiple IoT service providers over a common MEC platform deployment, which enables the steering and shaping of IoT data transport within the platform. Secondly, we model the problem of service placement and data management in the proposed MEC-based solution taking into account the dependencies at the data level between IoT services and sensing resources. Our model also considers that caches can be deployed on MEC hosts, to allow the sharing of the same data between different IoT services with overlapping geographical scope, and provides support for IoT services with heterogeneous QoS requirements, such as different frequencies of periodic task execution. Due to the complexity of the optimisation problem, a heuristic algorithm is proposed using linear relaxation and rounding techniques. Extensive simulation results demonstrate the efficiency of the proposed approach, especially when traffic demands generated by the service requests are not uniform.

We investigate the effect of the microstructure on the mechanical response of lattice structures made of a defect tolerant Ti-14 Mo binary alloy fabricated by Electron Powder Bed Fusion. Some of the lattice structures were subjected to different heat treatments to compare different microstructures: a two-phase $\alpha$+$\beta$ microstructure inherited from the fabrication (as-built), a full $\beta$-metastable microstructure, and a $\beta$-metastable microstructure strengthened via nanoprecipitation of the $\omega$iso phase. We demonstrate that the macroscopic mechanical behavior of one of the most popular stretching-dominated lattice structure, namely the octet-truss, can be tailored through microstructural optimization by increasing the tolerance to plastic buckling of the constitutive struts. Defect-tolerant materials pave the way towards lattice structures fabricated by additive manufacturing with optimized energy absorption performances.

This study comprehensively analyzes Atlas's current orbit, focusing on the secular and resonant perturbations caused by Prometheus, Pandora, and Saturn's oblateness. We performed numerical integration of the exact equations of motion for a dense ensemble of Atlas clone satellites. Through spectral analysis and interpretation of these orbits on dynamical maps, we identified the domain of the 54:53 Prometheus-Atlas and 70:67 Pandora-Atlas mean-motion resonances, showing that Atlas lies on the boundary of the separatrices of each of these resonances. We also identified the domains for the multiplets $\Psi_{1}$, $\Psi_{2}$, $\Psi_{3}$ and $\Psi_{4}$ associated with 70:67 resonance. Additionally, we explored the variation in Prometheus's eccentricity, demonstrating that as eccentricity increases (or decreases) in the 54:53 resonance domain correspondingly decreases (or increases). This combined analysis, between the above mappings, revealed qualitatively the overlap between the 54:53 and 70:67 resonances, which are responsible for the chaotic behavior of Atlas's orbit. We quantified chaotic motion in frequency space and found that the vicinity of Atlas is characterized by weak to moderate chaos, rather than strong chaos. Finally, we investigated Atlas's recent past, considering Prometheus's migration under the influence of Saturn's tidal forces. This analysis reveals several resonances crossed in the past, particularly focusing on the Atlas-Prometheus pair, which exhibited a co-orbital configuration., Comment: 29 pages, 16 figures. Published in PSS

In this paper we propose an independent channel precoder for orthogonal frequency division multiplexing (OFDM) systems over fading channels. The design of the precoder is based on the information redistribution of the input modulated symbols amongst the output precoded symbols. The proposed precoder decreases the variance of the instantaneous noise power at the receiver produced by the channel variability. The employment of an interleaver together with a precoding matrix whose size does not depend on the number of data carriers in an OFDM symbol allows different configurations of time-frequency diversity which can be easily adapted to the channel conditions. The precoder is evaluated with a modified Zero Forcing (ZF) equalizer whose maximum gain is constrained by means of a clipping factor. Thus, the clipping factor limits the noise power transfer in the receiver deprecoding block in low SNR conditions., Comment: 8 pages, 7 figures

This article describes a procedure for measuring and evaluating radio impulsive noise (IN) from a specific source. A good knowledge of the noise caused by different sources is essential to plan radio services and to ensure good quality of service. Moreover, it is necessary to harmonize noise measurement methods to achieve results that can be mutually compared. This article not only provides steps that should be followed to make proper measurements, but also specifies appropriate parameters to characterize the IN when it is generated by a principal source. A detailed description of parameter calculation is presented, based on the recommendations of the International Telecommunication Union (ITU). This answers the request made in an ITU-R 214-4/3 question, which suggests determining the appropriate parameters to describe the noise when it has an impulsive characteristic.

Logic gates are an indispensable part of digital circuits, and therefore such devices with fast operating speeds and simple designs are vital for all kinds of electronic applications. This paper proposes simple Y-shaped designs of all-optical AND, OR, and NOT logic gates in two dimensions that are operational in both TE and TM modes. These gates are designed using silicon slab waveguides, which makes them relatively easy to fabricate. The logic gates are designed, analyzed, and optimized at 1.55 $\mu$m using the finite difference time domain method. The truth table of the proposed all-optical logic gates is realized for every input case. The propagation delay time is determined to be of the order of femtoseconds ($10^{-15}$ s), which is very fast compared to the response time of the currently existing all-optical logic gates ($10^{-9}$ s - $10^{-12}$ s)., Comment: Accepted version | Published in Microwave and Optical Technology Letters

The interaction of body worn antennas with the human body causes a significant decrease in the antenna efficiency and a shift in the resonant frequency. A resonant slot in a small conductive box placed on the body has been shown to reduce these effects. The specific absorption rate (SAR) is less than international health standards for most wearable antennas due to the small transmitter power. This paper reports the linear relationship between the power absorbed by biological tissues at different locations on the body, and the radiation efficiency based on numerical modeling (r = 0.99). While the -10 dB bandwidth of the antenna remains constant and equal to 12.5%, the maximum frequency shift occurs when the antenna is close to the elbow (6.61%) and on the thigh (5.86%). The smallest change was found on the torso (4.21%). Participants with body-mass index (BMI) between 17 and 29 kg/m2 took part in experimental measurements, where the maximum frequency shift was 2.51%. Measurements show better agreement with simulations on the upper arm. These experimental results demonstrate that the BMI for each individual has little effect on the performance of the antenna.

We pursue to illustrate the capabilities of the Dual Model of Liquids showing that it may explain crossed effects notable in Non-Equilibrium Thermodynamics. The aim of the paper is to demonstrate that the DML may correctly model the thermodiffusion, in particular getting formal expressions for positive and negative Soret coefficient, and another unexpected mechano-thermal effect recently discovered in liquids submitted to shear strain, for which the first-ever theoretical interpretation is provided.

Detecting actions as they occur is essential for applications like video surveillance, autonomous driving, and human-robot interaction. Known as online action detection, this task requires classifying actions in streaming videos, handling background noise, and coping with incomplete actions. Transformer architectures are the current state-of-the-art, yet the potential of recent advancements in computer vision, particularly vision-language models (VLMs), remains largely untapped for this problem, partly due to high computational costs. In this paper, we introduce TOAD: a Text-driven Online Action Detection architecture that supports zero-shot and few-shot learning. TOAD leverages CLIP (Contrastive Language-Image Pretraining) textual embeddings, enabling efficient use of VLMs without significant computational overhead. Our model achieves 82.46% mAP on the THUMOS14 dataset, outperforming existing methods, and sets new baselines for zero-shot and few-shot performance on the THUMOS14 and TVSeries datasets., Comment: Published in Integrated Computer-Aided Engineering

This paper presents a thermal characterization of salt mixtures applying the T-History Method and the Differential Scanning Calorimetry DSC techniques. By using water as a standard substance, the original T-History method was developed to analyze materials with melting points under 100 Celsius. This is the first research that proposes to replace water by glycerin to characterize medium melting temperature PCMs from 140 to 220 Celsius. Moreover, the DSC technique was used to validate and compare the results obtained with the T-history method for each mixture. For instance, the system compound of 40 KNO$_3$ to 60 NaNO$_3$ was studied, and the enthalpy of fusion determined by THM and DSC differs by 2.1% between each method. The results given by the two methods for all mixtures showed that both techniques are complementary and present satisfactory agreement with the specialized literature., Comment: 11 pages, 5 figures, 2 tables, research article

This paper presents a novel approach for similarity search with complex filtering capabilities on billion-scale datasets, optimized for CPU inference. Our method extends the classical IVF-Flat index structure to integrate multi-dimensional filters. The proposed algorithm combines dense embeddings with discrete filtering attributes, enabling fast retrieval in high-dimensional spaces. Designed specifically for CPU-based systems, our disk-based approach offers a cost-effective solution for large-scale similarity search. We demonstrate the effectiveness of our method through a case study, showcasing its potential for various practical uses., Comment: 14 pages, 3 figures, published in Cybernetics and Information Technologies

In this work, we explore a method for obtaining site-controlled InAs quantum dots (QDs) on large areas of GaAs (0 0 1) pre-patterned surface. The patterning of the substrate is obtained by using a monolithically integrated nano-channel alumina (NCA) mask and transferring its self-ordering to the underlying GaAs substrate by continuing the anodization process once the GaAs surface is reached. After patterning, the GaAs substrate follows a low temperature process for surface preparation before epitaxial growth for QD formation. As a final result, we observe that the nanoholes act as preferential nucleation sites for InAs QD formation, with a filling factor close to unity, while the QD formation on the surface region between the pattern holes is completely suppressed., Comment: 8 pages, 6 figures

This study delves into the thermoelectric properties of armchair black phosphorene nanoribbons while considering the presence of line edge roughness. Employing the tight-binding method in conjunction with non-equilibrium Green's function techniques and Landauer formulas, we explore the impact of various parameters on thermoelectric performance. Our findings reveal that the electrical conductivity and, consequently, the power factor exhibit an increasing trend with expanding ribbon length and width. This behavior can be attributed to heightened collision rates, particularly in narrow ribbons, induced by line edge roughness as length increases. Remarkably, the Seebeck coefficient at the Fermi energy corresponding to the maximum power factor remains nearly constant across different widths, lengths, temperatures and transport regimes. Furthermore, the thermoelectric figure of merit demonstrates a positive correlation with both ribbon length and width. In narrow widths and lengths around 1000 nm, the power factor and figure of merit exhibit an upward trend with ribbon width. However, with further increases in ribbon width, the influence of line edge roughness on thermal conductivity diminishes. Consequently, the figure of merit decreases due to the rise in thermal conductivity. Notably, the thermoelectric figure of merit is higher for short and narrow ribbons and long and wider ribbons.

In this paper, we calculate the radiative correction to the Casimir energy for both massive and massless Lorentz-violating scalar fields confined between two membranes with rough surfaces in a 3+1 dimensional spacetime. The computations are performed for four types of boundary conditions: Dirichlet, Neumann, Periodic, and Mixed. A crucial element of our approach involves the use of position-dependent counterterms to incorporate the influence of boundaries within the renormalization program. To manage the divergences that emerge in the Casimir energy calculations, we apply the Box Subtraction Scheme (BSS) along with the cutoff regularization technique. We present and discuss results for various degrees of membrane roughness, emphasizing the consistency of our findings with theoretical expectations., Comment: 14 pages, 8 figures, Accepted for publication on IJGMMP

Kelp forests, as foundation species, are vital to marine ecosystems, providing essential food and habitat for numerous organisms. This study explores the integration of crowdsourced labels with advanced artificial intelligence models to develop a fast and accurate kelp canopy detection pipeline using Landsat images. Building on the success of a machine learning competition, where this approach ranked third and performed consistently well on both local validation and public and private leaderboards, the research highlights the effectiveness of combining Mixed Vision Transformers (MIT) with ConvNeXt models. Training these models on various image sizes significantly enhanced the accuracy of the ensemble results. U-Net emerged as the best segmentation architecture, with UpperNet also contributing to the final ensemble. Key Landsat bands, such as ShortWave InfraRed (SWIR1) and Near-InfraRed (NIR), were crucial while altitude data was used in postprocessing to eliminate false positives on land. The methodology achieved a high detection rate, accurately identifying about three out of four pixels containing kelp canopy while keeping false positives low. Despite the medium resolution of Landsat satellites, their extensive historical coverage makes them effective for studying kelp forests. This work also underscores the potential of combining machine learning models with crowdsourced data for effective and scalable environmental monitoring. All running code for training all models and inference can be found at https://github.com/IoannisNasios/Kelp_Forests.

The measurement of plutonium isotopes, 239Pu and 240Pu, at 670 kV on the compact accelerator mass spectrometry (AMS) system at the Centro Nacional de Aceleradores (CNA) in Seville, Spain, is now a reality. In this work, we present first Pu AMS results for environmental samples: a sediment core collected in a submarine canyon in the Mediterranean coast of the Spanish region of Palomares, affected by a nuclear accident in 1966. From the study of the 240Pu/239Pu atomic ratio profile, showing on average levels lower than 11%, we confirm that the weapon-grade plutonium released on land during the accident, with a characteristic 240Pu/239Pu atomic ratio of 5.8%, has found its way into the marine environment. A two-plutonium sources mixture model (Palomares and fallout) is used to elucidate the percentage of the plutonium coming from the accident. As a validation exercise of the Pu AMS measuring technique and in order to obtain the 238Pu/(239+240)Pu activity ratios, samples were also studied by alpha-spectrometry (AS). The obtained AS 239+240Pu activity concentration results fit in with the AMS ones in a wide dynamic range, thus validating the AMS technique., Comment: 12 pages, 1 table, 3 figures

A radiochemical method for the isolation of plutonium isotopes from environmental samples, based on the use of specific chromatography resins for actinides (TEVA, Eichrom Industries), has been set up in our laboratory and optimised for their posterior determination by alpha spectrometry (AS) or accelerator mass spectrometry (AMS). The proposed radiochemical method has replaced in our lab a well established one based on the use of a relatively un-specific anion-exchange resin (AG1X8, Biorad), because it is clearly less time consuming, reduces the amounts and molarities of acid wastes produced, and reproducibly gives high radiochemical yields. In order to check the reliability of the proposed radiochemical method for the determination of plutonium isotopes in different environmental matrixes, twin aliquots of a set of samples were prepared with TEVA and with AG 1X8 resins and measured by AS. Some samples prepared with TEVA resins were measured as well by AMS. As it is shown in the text, there is a comfortable agreement between AS and AMS, which adequately validates the method., Comment: 21 pages, 4 figures, 4 Tables

One of the main operational challenges faced by the operators of one-way car-sharing systems is to ensure vehicle availability across the regions of the service areas with uneven patterns of rental requests. Fleet balancing strategies are required to maximise the demand served while minimising the relocation costs. However, the design of optimal relocation policies is a complex problem, and global optimisation solutions are often limited to very small network sizes for computational reasons. In this work, we propose a multi-stage decision support system for vehicle relocation that decomposes the general relocation problem into three independent decision stages to allow scalable solutions. Furthermore, we adopt a rolling horizon control strategy to cope with demand uncertainty. Our approach is highly modular and flexible, and we leverage it to design user-based, operator-based and robotic relocation schemes. Besides, we formulate the relocation problem considering both conventional cars and a new class of compact stackable vehicles that can be driven in a road train. We compare the proposed relocation schemes with two recognised benchmarks using a large data set of taxi trips in New York. Our results show that our approach is scalable and outperforms the benchmark schemes in terms of quality of service, vehicle utilisation and relocation efficiency. Furthermore, we find that stackable vehicles can achieve a relocation performance close to that of autonomous cars, even with a small workforce of relocators.

Learning Objects represent a widespread approach to structuring instructional materials in a large variety of educational contexts. The main aim of this work consists of analyzing from a qualitative point of view the process of generating reusable learning objects (RLOs) followed by Clavy, a tool that can be used to retrieve data from multiple medical knowledge sources and reconfigure such sources in diverse multimedia-based structures and organizations. From these organizations, Clavy is able to generate learning objects which can be adapted to various instructional healthcare scenarios with several types of user profiles and distinct learning requirements. Moreover, Clavy provides the capability of exporting these learning objects through educational standard specifications, which improves their reusability features. The analysis insights highlight the importance of having a tool able to transfer knowledge from the available digital medical collections to learning objects that can be easily accessed by medical students and healthcare practitioners through the most popular e-learning platforms., Comment: first submited

This paper investigates deteriorations in knee and ankle dynamics during running. Changes in lower limb accelerations are analyzed by a wearable musculo-skeletal monitoring system. The system employs a machine learning technique to classify joint stiffness. A maximum-entropyrate method is developed to select the most relevant features. Experimental results demonstrate that distance travelled and energy expended can be estimated from observed changes in knee and ankle motions during 5 km runs.

We classify the global dynamics of a family of Kolmogorov systems depending on three parameters which has ecological meaning as it modelizes a predator-prey system. We obtain all their topologically distinct global phase portraits in the positive quadrant of the Poincar\'e disc, so we provide all the possible distinct dynamics of these systems.

We record and analyze the movement patterns of the marsupial {\it Didelphis aurita} at different temporal scales. Animals trajectories are collected at a daily scale by using spool-and-line techniques, and with the help of radio-tracking devices animals traveled distances are estimated at intervals of weeks. Small-scale movements are well described by truncated L\'evy flight, while large-scale movements produce a distribution of distances which is compatible with a Brownian motion. A model of the movement behavior of these animals, based on a truncated L\'evy flight calibrated on the small scale data, converges towards a Brownian behavior after a short time interval of the order of one week. These results show that whether L\'evy flight or Brownian motion behaviors apply, will depend on the scale of aggregation of the animals paths. In this specific case, as the effect of the rude truncation present in the daily data generates a fast convergence towards Brownian behaviors, L\'evy flights become of scarce interest for describing the local dispersion properties of these animals, which result well approximated by a normal diffusion process and not a fast, anomalous one. Interestingly, we are able to describe two movement phases as the consequence of a statistical effect generated by aggregation, without the necessity of introducing ecological constraints or mechanisms operating at different spatio-temporal scales. This result is of general interest, as it can be a key element for describing movement phenomenology at distinct spatio-temporal scales across different taxa and in a variety of systems., Comment: 22 pages, 5 figures

This paper deals with the construction of numerical stable solutions of random mean square Fisher-KPP models with advection. The construction of the numerical scheme is performed in two stages. Firstly, a semidiscretization technique transforms the original continuous problem into a nonlinear unhomogeneous system of random differential equations. Then, by extending to the random framework the ideas of the exponential time differencing method, a full vector discretization of the problem addresses to a random vector difference scheme. A sample approach of the random vector difference scheme, the use of properties of Metzler matrices and the logarithmic norm allow the proof of stability of the numerical solutions in the mean square sense. In spite of the computational complexity the results are illustrated by comparing the results with a test problem where the exact solution is known., Comment: 19 pages, 6 figures, article

These notes contain -- apart from some physics -- scattered reminiscences of everyday life at the Institute for Theoretical Physics in G\"oteborg in the early eighties. The text has been in the making for many years. Some of it was written inspired by the Lars Brink 70-fest at The Solvay Institute in Brussels in 2014, but was never finished or published. Parts of the old text has now been replaced by a review of the quite unexpected recent renaissance for light-front higher spin theory. Lars sadly did not live to experience more than the very beginnings of this quite remarkable development. The text was finalized in the spring of 2023., Comment: Contribution to a memorial volume for Lars Brink, to be published by World Scientific

Two algorithms are introduced for the computation of discrete integral transforms with a multiscale approach operating in discrete three-dimensional (3D) volumes while considering its real-time implementation. The first algorithm, referred to as 3D discrete Radon transform (DRT) of planes, will compute the summation set of values lying in discrete planes in a cube that imitates, in discrete data, the integrals on two-dimensional planes in a 3D volume similar to the continuous Radon transform. The normals of these planes, equispaced in ascents, cover a quadrilateralized hemisphere and comprise 12 dodecants. The second proposed algorithm, referred to as the 3D discrete John transform (DJT) of lines, will sum elements lying on discrete 3D lines while imitating the behavior of the John or X-ray continuous transform on 3D volumes. These discrete integral transforms do not perform interpolation on input or intermediate data, and they can be computed using only integer arithmetics with linearithmic complexity; thus, outperforming the methods based on the Fourier slice-projection theorem for real-time applications. We briefly prove that these transforms have fast inversion algorithms that are exact for discrete inputs.

Turbo codes are well known to be one of the error correction techniques which achieve closer results to the Shannon limit. Nevertheless, the specific performance of the code highly depends on the particular decoding algorithm used at the receiver. In this sense, the election of the decoding algorithm involves a trade off between the gain introduced by the code and the complexity of the decoding process. In this work we perform a thorough analysis of the different iterative decoding techniques and analyze their suitability for being implemented in the user terminals of new cellular and broadcast systems which are based on orthogonal frequency division multiplexing (OFDM). The analyzed iterative decoding algorithms are the Max-Log-MAP and the soft output Viterbi algorithm (SOVA), since both of them have a relative low computational complexity, simplifying their implementation in cost efficient terminals. Simulation results have been obtained for different encoder structures, block sizes and considering realistic channel conditions (an OFDM transmission over a wireless channel)., Comment: 7 pages, 11 figures

In this work we propose a novel decoding algorithm for tailbiting convolutional codes and evaluate its performance over different channels. The proposed method consists on a fixed two-step Viterbi decoding of the received data. In the first step, an estimation of the most likely state is performed based on a SOVA decoding. The second step consists of a conventional Viterbi decoding that employs the state estimated in the previous step as the initial and final states of the trellis. Simulations results show a performance close to that of maximum-likelihood decoding., Comment: 3 pages, 3 figures

We give the first example of a nontrivial twisted Hilbert space that satisfies the Johnson-Lindenstrauss lemma. This space has no unconditional basis. We also show that such a space gives a partial answer to a question of Mascioni.

Bayesian optimization (BO) is well known to be sample-efficient for solving black-box problems. However, the BO algorithms can sometimes get stuck in suboptimal solutions even with plenty of samples. Intrinsically, such suboptimal problem of BO can attribute to the poor surrogate accuracy of the trained Gaussian process (GP), particularly that in the regions where the optimal solutions locate. Hence, we propose to build multiple GP models instead of a single GP surrogate to complement each other and thus resolving the suboptimal problem of BO. Nevertheless, according to the bias-variance tradeoff equation, the individual prediction errors can increase when increasing the diversity of models, which may lead to even worse overall surrogate accuracy. On the other hand, based on the theory of Rademacher complexity, it has been proved that exploiting the agreement of models on unlabeled information can help to reduce the complexity of the hypothesis space, and therefore achieving the required surrogate accuracy with fewer samples. Such value of model agreement has been extensively demonstrated for co-training style algorithms to boost model accuracy with a small portion of samples. Inspired by the above, we propose a novel BO algorithm labeled as co-learning BO (CLBO), which exploits both model diversity and agreement on unlabeled information to improve the overall surrogate accuracy with limited samples, and therefore achieving more efficient global optimization. Through tests on five numerical toy problems and three engineering benchmarks, the effectiveness of proposed CLBO has been well demonstrated.

In this paper we establish hierarchic control for the wave equation in a non cylindrical domain $\widehat{Q}$ of $\mathbb{R}^{n + 1}$. We assume that we can act in the dynamic of the system by a hierarchy of controls. According to the formulation given by H. Von Stackelberg \cite{S}, there are local controls, called followers and global controls, called leaders. In fact, one considers situations where there are two cost (objective) functions. One possible way is to cut the control into two parts, one being thought of as "the leader" and the other one as "the follower". This situation is studied in the paper, with one of the cost functions being of the controllability type. Existence and uniqueness is proven. The optimality system is given in the paper., Comment: 9 pages. arXiv admin note: text overlap with arXiv:2501.06672

Human Action Recognition (HAR) is a challenging domain in computer vision, involving recognizing complex patterns by analyzing the spatiotemporal dynamics of individuals' movements in videos. These patterns arise in sequential data, such as video frames, which are often essential to accurately distinguish actions that would be ambiguous in a single image. HAR has garnered considerable interest due to its broad applicability, ranging from robotics and surveillance systems to sports motion analysis, healthcare, and the burgeoning field of autonomous vehicles. While several taxonomies have been proposed to categorize HAR approaches in surveys, they often overlook hybrid methodologies and fail to demonstrate how different models incorporate various architectures and modalities. In this comprehensive survey, we present the novel SMART-Vision taxonomy, which illustrates how innovations in deep learning for HAR complement one another, leading to hybrid approaches beyond traditional categories. Our survey provides a clear roadmap from foundational HAR works to current state-of-the-art systems, highlighting emerging research directions and addressing unresolved challenges in discussion sections for architectures within the HAR domain. We provide details of the research datasets that various approaches used to measure and compare goodness HAR approaches. We also explore the rapidly emerging field of Open-HAR systems, which challenges HAR systems by presenting samples from unknown, novel classes during test time.

An extension to triangular domains of the univariate q-Bernstein basis functions is introduced and analyzed. Some recurrence relations and properties such as partition of unity and degree elevation are proved for them. It is also proved that they form a basis for the space of polynomials of total degree less than or equal to n on a triangle. In addition, it is presented a de Casteljau type evaluation algorithm whose steps are all linear convex combinations.

Punctuation is the main factor introducing correlations in natural language written texts and it crucially impacts their overall effectiveness, expressiveness, and readability. Punctuation marks at the end of sentences are of particular importance as their distribution can determine various complexity features of written natural language. Here, the sentence length variability (SLV) time series representing "Hopscotch" by Julio Cortazar are subjected to quantitative analysis with an attempt to identify their distribution type, long-memory effects, and potential multiscale patterns. The analyzed novel is an important and innovative piece of literature whose essential property is freedom of movement between its building blocks given to a reader by the author. The statistical consequences of this freedom are closely investigated in both the original, Spanish version of the novel, and its translations into English and Polish. Clear evidence of rich multifractality in the SLV dynamics, with a left-sided asymmetry, however, is observed in all three language versions as well as in the versions with differently ordered chapters.

Information and communications technology and technology-enhanced learning have unquestionably transformed traditional teaching-learning processes and are positioned as key factors to promote quality education, one of the basic sustainable development goals of the 2030 agenda. Document annotation, which was traditionally carried out with pencil and paper and currently benefits from digital document annotation tools, is a representative example of this transformation. Using document annotation tools, students can enrich the documents with annotations that highlight the most relevant aspects of these documents. As the conceptual complexity of the learning domain increases, the annotation of the documents may require comprehensive domain knowledge and an expert analysis capability that students usually lack. Consequently, a proliferation of irrelevant, incorrect, and/or poorly decontextualized annotations may appear, while other relevant aspects are completely ignored by the students. The main hypothesis proposed by this paper is that the use of a guiding annotation ontology in the annotation activities is a keystone aspect to alleviate these shortcomings. Consequently, comprehension is improved, exhaustive content analysis is promoted, and meta-reflective thinking is developed. To test this hypothesis, we describe our own annotation tool, \@note, which fully implements this ontology-enhanced annotation paradigm, and we provide experimental evidence about how \@note can improve academic performance via a pilot study concerning critical literary annotation.

In this paper, we describe an approach to transforming the huge amount of medical knowledge available in existing online medical collections into standardized learning packages ready to be integrated into the most popular e-learning platforms. The core of our approach is a tool called Clavy, which makes it possible to retrieve pieces of content in medical collections, to transform this content into meaningful learning units, and to export it in the form of standardized learning packages. In addition to describing the approach, we demonstrate its feasibility by applying it to the generation of IMS content packages from MedPix, a popular online database of medical cases in the domain of radiology.

Big data present new opportunities for modern society while posing challenges for data scientists. Recent advancements in sensor networks and the widespread adoption of IoT have led to the collection of physical-sensor data on an enormous scale. However, significant challenges arise in high-quality big data analytics. To uncover big data challenges and enhance data quality, it is essential to quantitatively unveil data characteristics. Furthermore, the existing studies lack analysis of the specific time-related characteristics. Enhancing the efficiency and precision of data analytics through the big data lifecycle requires a comprehensive understanding of data characteristics to address the hidden big data challenges. To fill in the research gap, this paper proposes a systematic data characteristic framework based on a 6Vs model. The framework aims to unveil the data characteristics in terms of data volume, variety, velocity, veracity, value, and variability through a set of statistical indicators. This model improves the objectivity of data characteristic understanding by relying solely on data-driven indicators. The indicators related to time-related characteristics in physical-sensor data are also included. Furthermore, the big data challenges are linked to each dimension of the 6Vs model to gain a quantitative understanding of the data challenges. Finally, a pipeline is developed to implement the proposed framework, and two case studies are conducted to illustrate the process of understanding the physical-sensor data characteristics and making recommendations for data preprocessing to address the big data challenges. The proposed framework is able to analyze the characteristics of all physical-sensor data, therefore, identifying potential challenges in subsequent analytics, and providing recommendations for data preprocessing.

We construct a weak Hilbert space that is a twisted Hilbert space.

The glow-to-arc transition is a critical phenomenon in plasma discharges, commonly leading to detrimental effects. The physical mechanisms triggering this transition remain poorly understood. The advent of a discharge called Hyper-Power Impulse Magnetron has opened possibilities. Hyper-Power Impulse Magnetron allows the glow mode to be maintained over long periods (1 ms) and at high-current densities (> 5 A/cm$^2$), which has unveiled certain features in the glow-to-arc transition. This work focuses on a graphite target that transits easily in the arc regime. The high-speed video-camera analysis revealed specific properties of graphite in ExB discharges, and the statistical study of the arc transition revealed differences from other refractory target materials. The early stage of cathodic spot formation, observed as bright dots, will be presented and analyzed within the known "ecton" and "vaporization" models for spot formation. This experimental study highlights the role of luminous spot formation prior to arc transition, with possible optimization on the stability of magnetron discharges.

Brain imaging plays a crucial role in the diagnosis and treatment of various neurological disorders, providing valuable insights into the structure and function of the brain. Techniques such as magnetic resonance imaging (MRI) and computed tomography (CT) enable non-invasive visualization of the brain, aiding in the understanding of brain anatomy, abnormalities, and functional connectivity. However, cost and radiation dose may limit the acquisition of specific image modalities, so medical image synthesis can be used to generate required medical images without actual addition. In the medical domain, where obtaining labeled medical images is labor-intensive and expensive, addressing data scarcity is a major challenge. Recent studies propose using transfer learning to overcome this issue. This involves adapting pre-trained CycleGAN models, initially trained on non-medical data, to generate realistic medical images. In this work, transfer learning was applied to the task of MR-CT image translation and vice versa using 18 pre-trained non-medical models, and the models were fine-tuned to have the best result. The models' performance was evaluated using four widely used image quality metrics: Peak-signal-to-noise-ratio, Structural Similarity Index, Universal Quality Index, and Visual Information Fidelity. Quantitative evaluation and qualitative perceptual analysis by radiologists demonstrate the potential of transfer learning in medical imaging and the effectiveness of the generic pre-trained model. The results provide compelling evidence of the model's exceptional performance, which can be attributed to the high quality and similarity of the training images to actual human brain images. These results underscore the significance of carefully selecting appropriate and representative training images to optimize performance in brain image analysis tasks., Comment: 19 pages, 9 figures, 6 tables

The effect of platinum (Pt) bottom electrode texture on the tetragonality, dielectric, ferroelectric, and polarization switching response of pulsed laser deposited Ba0.8Sr0.2TiO3 (BST) thin films has been studied. The x-ray diffraction and Raman analysis revealed the higher tetragonality of BST films when they were grown on higher (111) textured Pt layer. The properties like dielectric permittivity, polarization, switching time, and leakage currents were found to be correlated to tetragonality and orientation of the BST films. The polarization current was observed to be higher in BST films on Pt epitaxial layer and it exhibits exponential dependence on the electric field. The voltage-current measurements displayed Ohmic behavior of leakage current irrespective of Pt texture for low voltages (up to 1 V), whereas at higher voltages the conduction mechanism was found to be dependent on texture selection of bottom Pt electrode., Comment: 23 pages, 14 figures

Vehicular communication networks represent both an opportunity and a challenge for providing smart mobility services by using a hybrid solution that relies on cellular connectivity and short range communications. The evaluation of this kind of network is overwhelmingly carried out in the present literature with simulations. However, the degree of realism of the results obtained is limited because simulations simplify real world interactions too much in many cases. In this article, we define an outdoor testbed to evaluate the performance of short range vehicular communications by using real world personal portable devices (smartphones, tablets, and laptops), two different PHY standards (IEEE 802.11g and IEEE 802.11a), and vehicles. Our test results on the 2.4 GHz band show that smartphones can be used to communicate vehicles within a range up to 75 m, while tablets can attain up to 125 m in mobility conditions. Moreover, we observe that vehicles equipped with laptops exchange multimedia information with nodes located further than 150 m. The communications on the 5 GHz band achieved an effective transmission range of up to 100 m. This, together with the optimization of the protocols used, could take our commodity lightweight devices to a new realm of use in the next generation of ad hoc mobility communications for moving through the city.

The article provides a brief description of the software package DECH for processing and analysis of astronomical spectra. DECH supports all stages of processing and analysis of spectral data, including image preprocessing, spectra extraction (including those with a variable tilted slit), wavelength calibration by a two-dimensional polynomial, continuum normalization (manual or automatic), measurement of equivalent widths and radial velocities in various ways, cross-correlation analysis, etc. The DECH software package is actively used by astronomers from different countries and continues to be improved. In particular, utilities for processing and analysis of data from the high-resolution fiber-feed echelle spectrograph installed at 6-m telescope of Special Astrophysical Observatory of Russian Academy of Sciences were added in the latest version. Software provides high-precision measurements of radial velocities, including those for detection of extraterrestrial planets., Comment: 15 pages, 9 figures

A microscopic vision is presented of a Dual Model of Liquids from a solid picture. Among the novelties of this model is that it provides quantitative expressions of various extensive thermophysical properties. The introduction of the statistical number of excited degrees of freedom (DoF) allows bypassing the problem of other dual models which are sometimes unable to correctly reproduce the expressions for those thermophysical quantities showing deviations due to the activation or deactivation of internal DoF. The interpretation of the relaxation times is given, their Order of Magnitude calculated and the way in which these times are involved in the different phases of the collective dynamics of liquids is discussed. A comparison is provided with results obtained in the frame of another phononic model of liquids, as well as with the predictions for the viscoelastic transition regions and with systems exhibiting kgap. In the last part of the paper, theoretical insights and experiments are suggested as potential directions for future research and development.

This paper provides an accurate method to obtain the bidiagonal factorization of many generalized Pascal matrices, which in turn can be used to compute with high relative accuracy the eigenvalues, singular values and inverses of these matrices. Numerical examples are included.

Hydrogenated amorphous carbon thin films (a:C-H) are very promising materials for numerous applications. The growing of relevance of a:C-H is mainly due to the long-term stability of their outstanding properties. For improving their performances, a full understanding of their local chemistry is highly required. Fifteen years ago, electron energy-loss spectroscopy (EELS), developed in a transmission electron microscope (TEM), was the technique of choice to extract such kind of quantitative information on these materials. Other optical techniques, as Raman spectroscopy, are now clearly favored by the scientific community. However, they still lack of the spatial resolution offered by TEM-EELS. In addition, nowadays, the complexity of the physics phenomena behind EELS is better known. Here, a:C-H thin films have been isothermally annealed and the evolution of their physical and chemical parameters have been monitored at the local and macroscopic scales. In particular, chemical in-depth inhomogeneities and their origins are highlighted. Furthermore, a novel procedure to extract properly and reliably quantitative chemical information from EEL spectra is presented. Finally, the pertinence of empirical models used by the Raman community is discussed. These works demonstrate the pertinence of the combination of local and macroscopic analyses for a proper study of such complex materials.

High frequency applications of superconductors in a dc magnetic field rely on the estimate of the characteristic crossover frequency $\nu_c$ between low and high losses. Customarily, high sensitivity resonant techniques, intrinsically operating at discrete frequencies, are used to estimate $\nu_c$. We exploit here a method based on a dual frequency resonator. We show that single-frequency evaluations of $\nu_c$ lead to heavy underestimations of the superconductor surface resistance. We describe a combined analytical and experimental approach that gives more accurate estimates for $\nu_c$, and additionally allows to test the underlying physical model., Comment: 13 pages, 9 figures, published on Measurement

Concise and meaningful method names are crucial for program comprehension and maintenance. However, method names may become inconsistent with their corresponding implementations, causing confusion and errors. Several deep learning (DL)-based approaches have been proposed to identify such inconsistencies, with initial evaluations showing promising results. However, these evaluations typically use a balanced dataset, where the number of inconsistent and consistent names are equal. This setup, along with flawed dataset construction, leads to false positives, making reported performance less reliable in real-world scenarios, where most method names are consistent. In this paper, we present an empirical study that evaluates state-of-the-art DL-based methods for identifying inconsistent method names. We create a new benchmark by combining automatic identification from commit histories and manual developer inspections, reducing false positives. We evaluate five representative DL approaches (one retrieval-based and four generation-based) on this benchmark. Our results show that performance drops substantially when moving from the balanced dataset to the new benchmark. We further conduct quantitative and qualitative analyses to understand the strengths and weaknesses of the approaches. Retrieval-based methods perform well on simple methods and those with popular name sub-tokens but fail due to inefficient representation techniques. Generation-based methods struggle with inaccurate similarity calculations and immature name generation. Based on these findings, we propose improvements using contrastive learning and large language models (LLMs). Our study suggests that significant improvements are needed before these DL approaches can be effectively applied to real-world software systems.