Search

Two-dimensional semiconductors, known as Transition Metal Dichalcogenides (TMDCs), are of great interest among many materials due to their unique 2D characteristics, including exceptional electronic and optical properties. These compounds belong to the family of lamellar materials having a general formula of type $MX_2$, where M represents a transition metal belonging to one of groups IV, V, or VI of Mendeleev's periodic table, and X is a chalcogenide. These materials exhibit fundamental properties that are qualitatively different from their three-dimensional (3D) counterparts, often relating to their electronic and phononic band structure. The in-depth study of these materials has revealed remarkable phenomena, such as two-dimensional quantum phase transitions and optoelectronic phenomena related to electronic "valleys", which exploit the wavevector selectivity of the emission and the absorption of photons. Unlike graphene, materials such as MoS$_2$, MoSe$_2$, WS$_2$, and WSe$_2$ are semiconductors that have a bandgap varying from 1.2 to 1.9 electron volts (eV), depending on the number of layers. This characteristic makes them suitable for use as active elements in optoelectronic devices. Additionally, their two-dimensional nature and mechanical strength enable the realization of quantum phase transitions and electronic components on flexible substrates. It is also possible to create quantum wells based on MoS$_2$, with materials such as MoSe$_2$, WS$_2$, and WSe$_2$, depending on the band shift between the components of the quantum well. This work aims to propose a theoretical and numerical model for these materials, which will make it possible to determine the electronic band structure as well as the optical gain in an active zone composed of two-dimensional semiconductors. This research is of great importance for evaluating the performance of active zones in laser devices based on these materials., Comment: Master's thesis, 87 pages, in French

This comparative study allows to evaluate the performance of an electromagnetic jet to determine the electromagnetic response of materials, without being in usual far field conditions. In this work, the reflection coefficient of a substrate with ground plane, calculated analytically, is compared with that determined in simulation by the electromagnetic jet. The results show a satisfactory agreement after calibrating the simulated reflection coefficient at the focal point of the jet. Thus, we were able to find, by a local measurement, data consistent with a classical free space type measurement., Comment: in French language. 17{\`e}mes Journ{\'e}es de Caract{\'e}risation Microondes et Mat{\'e}riaux, Laboratoire GREMAIN; CEA Le Ripault, Apr 2023, TOURS, France

Attracted by the importance of new materials in nanotechnology area, this thesis develops this research field while deepening results. We started by introducing the more sophisticated simulation and calculation methods, such as the Monte Carlo method, the mean field theory, the effectif field theory and the transfer matrix. Subsequently, we studied the magnetic and hysteretic properties of the materials. Then we have detailed some of our contributions related to the materials based on graphene and ferrimagnetic nanomaterials with different morphologies. We discussed the effect of defects on the thermodynamic properties of these novel materials. Particular attention was paid to the physical parameters that influence the compensation behavior that is of crucial importance for technological applications such as thermo-optical recording. With all these elements, we are opened ourselves up to the latest developments in physics of new materials. Finally, we finished with the conclusion and perspectives., Comment: in French

This study is about the properties of the sets of objects associated in a structure resulting from multiple-processes involving chance as are materials whose texture is unordered and random. Being a paper scientist the author refers to the sheet of paper which is a stochastic fibrous set whose porous texture can be considered as an archetype for many natural or artificial human structures. The paper properties are correlated with its texture by taking account the effect of chance occurring during its manufacturing process. The theoretical developments, the formalism and the application methods presented in this study have a general significance beyond the only paper material.A specific property of sets of objects randomly unorderly distributed in space is their interfaces orientation distribution. This distribution is usually obtained by the analysis of images sampled in the object sets. The density of orientation probability of the fibers or of the texture interfaces, weighted by their length or by their area, can be interpreted as the radius of curvature of an outline or of a warped surface which characterizes, from a global and statistical point of view, the texture geometry in two or three dimensions. This figure named by the author the "equivalent pore", is with its elliptical shape similar to the one of the mean pore defined by the mean directional chord between the interfaces in the texture. Different methods of "equivalent pore" establishing are analyzed : by conformal map of the fiber network or of the texture interfaces, by images stereometric analysis of texture tomographical cuts, by scattering and diffraction of a laser light beam impacting the fibrous texture or the material surface replica, by hard X-ray absorption and phase contrast at the European Synchrotron Radiation Facilities(ESRF), in Grenoble. The "equivalent pore" concept allows us to study random unordered sets behavior in strength fields while simplifying this analysis. Thus a phenomenon occurring in a plane set, in two dimensions, can be analyzed on its "equivalent pore" linear outline, and a phenomenon which occurs in volume in a three dimensional set can be analyzed on its "equivalent pore" warped surface. This concept has been applied for physical, mechanical, optical and ionic conduction properties of materials like papers, boards, felts, nonwoven textiles, polymer foams, metallic alloys with grain joints, geological grounds, and for the surface mapping of natural relief and of materials with different gloss, worn or roughness levels.The ellipse and the ellipso\"id, as well as multi-modes compositions of it, are the most appropriate figures to represent the "equivalent pore" of materials with a random unordered texture. The fact that a law, which defines the curvature of an elliptic deterministic geometrical configuration, is essential to represent interface orientation allocation of elements whose spatial distribution is probabilistic is a noteworthy fact that makes us wonder. This assertion is corroborated by fluid flow analysis through porous media. The global dissipated energy for fluid flow is distributed along the motion (translation and rotation) and fluid deformation components on the "equivalent pore" whose surface is conformal to the texture interfaces tangential space. The porous media being homogenous and the fluid particles indistinguishable each ones from the others, due to permanent stochastic exchanges from one fluid volume element into another, we conclude that their motion quantification is invariant on each point of the "equivalent pore" surface. This quantification can be represented by a group of elliptical cylinders.The "equivalent pore" and cylinders group surface intersections define the fluid particle probabilistic paths in the porous media. One singular geometrical configuration of the elliptic cylinders group union with the ellipsoidal "equivalent pore" fulfills the minimal energy dissipation requirements in the stress field applied to the fluid. The resulting paths are ellipso\"ido-cylindrical curves carpeting the ellipso\"id by a beam of isoperim\'etric lacets, in close or open loops depending on the possible pairing off the curves in their nodals and isoclinal tangency points. The flow laminarity and unrotationality are globally established in the porous media at the macroscopic scale, for Reynold's number small values, in agreement with the results found moreover. The so defined ellipso\"ido-cylindrical curve is a stationary curve at the average least action meaning, for a punctual mobile or a deformable volume element moving on the surface of the ellipsoid from a nodal spot to the other in an antipodal position. This curve establishes a gauge which characterizes, from a global point of view, the physical space embraced by the fluid during its flow, in dynamical balance conditions compatible with the stress field. The ellipso\"ido-cylindrical curve allows to carpet the ellipso\"id as a function of one cyclic angular variable, which is a new construction for the ellipso\"id. When the set of the objects is isotropic the curve is sphero-cylindrical whose plan mapping permit to decipher the tai-chi figure of the Tao\"ist Buddhism philosophy.This study of random unordered object sets, and more specially of fibrous porous media, allows to establish a structural link between their small scale texture stochastic disorder and the harmonious order that emerges from these sets at a larger scale. The largest chance possible, compatible with the stress field which put a strain on these sets, is the necessary and sufficient variable which allows to best globally adjust their behaviors according to the probabilistic and deterministic laws governing their evolution.The vocabulary used in this study is issued from the common language, most of the time adapted to the material class, it is transposable in other fields of interest. The text is completed by notes and a bibliography which refer to the works done following the presented concepts or in relation to this field of studies., Comment: Derni\`ere version, in French

The paper describes a new method for the identification of the flow stress curves of anisotropic sheet metals using a hydraulic bulge tests through circular and elliptical dies. This method is based on analytical model using the membrane equilibrium equation and experimental data involving the measurement of only polar deflection and applied hydraulic pressure. Four hydraulic bulge tests are used for the identification of flow stress parameters and anisotropy coefficients of Hill48 yield criterion. A sensitivity analysis of material parameters is carried out by FEA of hydraulic bulge tests. This identification procedure is applied on low carbon steel DC04 used for sheet metal forming. The obtained results are used for numerical simulation of plane tensile test to validation the proposed method. It is shown a good agreement between predicted and experimental results. -- Le papier pr\'esente une nouvelle m\'ethode pour l'identification des lois de comportement des t\^oles minces anisotropes \`a partir des essais de gonflement hydraulique en utilisant les essais \`a matrices circulaires et elliptiques. Cette m\'ethode est bas\'ee sur un mod\`ele analytique utilisant la th\'eorie des membranes et des mesures exp\'erimentales correspondants \`a la hauteur au p\^ole en fonction de la pression hydraulique appliqu\'ee. Quatre essais de gonflement hydraulique sont utilis\'es pour l'identification de la courbe d'\'ecrouissage et les coefficients d'anisotropie du crit\`ere de Hill48. Une \'etude de sensibilit\'e des param\`etres mat\'eriels sur les r\'eponses des essais de gonflement hydraulique (pression, hauteur et \'epaisseur au pole) pour les quatre essais est men\'ee par simulation num\'erique par \'el\'ements finis. Cette m\'ethodologie d'identification est appliqu\'ee \`a un acier doux DC04 destin\'e \`a l'emboutissage. Les r\'esultats de l'identification obtenus sont utilis\'es pour simuler l'essai de traction plane. Il est d\'emontr\'e que les r\'esultats trouv\'es sont en bon accord avec les r\'eponses exp\'erimentales., Comment: in French

Development of the new nanomaterial - the mesoporous Ge - by bipolar electrochemical etching (BEE) and analysis of its physico-chemical properties is the subject of this thesis. Formation of mesoporous Ge by electrochemical etching was previously reported in the literature. However, up to now, realization of thick (above 500 nm) mesoporous Ge layers with perfectly controlled morphology has been an issue. Indeed, the physico-chemical characterization of thin layers is much more complicated and the number of possible applications is very limited. We have developed an electrochemical model that describes the principal mechanisms of the pore formation which allowed us to produce the thick (up to 10 um) mesoporous Ge structures with the porosity adjustable in the range of 15% to 60% In addition, the formation of porous nanostructures with well-controlled variable morphologies has now become possible. Finally, the mastery of these parameters has opened the extremely promising path towards realization of porous multilayer structures based on Ge for many innovative and multidisciplinary applications. In particular, in the context of this thesis, the mesoporous layers of Ge were optimized for performing a layer transfer process of a triple-junction solar cell via a sacrificial layer of porous Ge. Keywords: mesoporous Germanium, bipolar electrochemical etching, electrochemistry of semiconductors, layer transfer process, solar cells., Comment: PhD thesis, in French, 150 pages, 89 figures. University of Sherbrooke, Sherbrooke (Canada), 13 September 2013

My scientific activities aim at understand and predict the mechanical behaviour of steels, from fundamental mechanisms to macroscopic deformation. This manuscript is dedicated to the TWIP effect (TWinning Induced Plasticity) of high manganese austenitic steels and DP effect (Dual-Phase) in more conventional Ferrite-Martensite steels., Comment: Habilitation Thesis, french, 172 pages

Ferritic steels possibly strengthened by oxide dispersion are candidates as structural materials for generation IV and fusion nuclear reactors. Their use is limited by incomplete knowledge of the iron-chromium phase diagram at low temperatures and of the phenomena inducing preferential segregation of one element at grain boundaries or at surfaces. In this context, this work contributes to the multi-scale study of the model iron-chromium alloy and their free surfaces by numerical simulations. This study begins with ab initio calculations of properties related to the mixture of atoms of iron and chromium. We highlight complex dependency of the magnetic moments of the chromium atoms on their local chemical environment. Surface properties are also proving sensitive to magnetism. This is the case of impurity segregation of chromium in iron and of their interactions near the surface. In a second step, we construct a simple energy model for high numerical efficiency. It is based on pair interactions on a rigid lattice to which are given local chemical environment and temperature dependencies. With this model, we reproduce the ab initio results at zero temperature and experimental results at high temperature. We also deduce the solubility limits at all intermediate temperatures with mean field approximations that we compare to Monte Carlo simulations. The last step of our work is to introduce free surfaces in our model. We then study the effect of ab initio calculated bulk and surface properties on surface segregation. Finally, we calculate segregation isotherms. We therefore propose an evolution model of surface composition of iron-chromium alloys as a function of bulk composition., Comment: Ph. D. thesis, 194 pages, in French, defended in Nov. 2010

In the context of elastic wave propagation in damaged solids, an analytical approach for scattering of antiplane waves by two-dimensional periodic arrays of cracks is developed. Before considering the study of arrays of cracks, the scattering of an antiplane wave by a flat crack is first studied. Then, using the representation formula for the scattered displacement by a flat and by considering the periodicity condition of the crack-spacing, a boundary integral equation is obtained for the crack face displacement of the reference crack. Numerical results for the reflection and transmission coefficients are presented as functions of the crack-spacing, the frequency of excitation, and the angle of incidence. Finally, the propagation of antiplane waves by two-dimensional periodic arrays of cracks is studied. Despite the use of a finite number of linear arrays, one recognizes the effects of band-pass filtering or band rejection characteristics of the transmission spectra of a periodic medium. Effects due to a disorder in the periodicity are also analysed., Comment: 21 pages (including 9 figures), in French

Disordered assemblies with maximum packing fraction are studied by discrete element numerical simulation for monodisperse or bidisperse spherical particles, the diameter ratio being set at three. A maximum packing fraction value corresponds to an equilibrium state under isotropic loading of rigid frictionless particles. A statistical study of size effects enables one to evaluate, in the limit of large systems, the maximum packing fractions of both monodisperse assemblies, for which the conventional value 0.639 is retrieved, and bidisperse ones, for two distinct values of the coarse particle volume fraction. An enduring initial assembling step in which agitated grains interact through collisions induces an increase in the final packing fraction due to crystalline order nucleation for a monodisperse system or to a gradual segregation for a binary mixture. Albeit slow and moderate in a number of practical situations, this effect leads to a definition of the random close packing state, as the one obtained with frictionless rigid grains under an isotropic pressure in the limit of fast assembling processes. A few potential extensions to this preliminary study are suggested., Comment: 15 pages, 3 figures. Article in French. A free English translation is available on the web site of the journal : http://www.lcpc.fr/en/sources/blpc/index.php

This chapter aims at identifying what is specific to femtosecond laser ablation. It reviews the essential basic processes which contribute to femtosecond laser ablation of various materials : energy absorption by the material's electrons, electronic relaxation processes involving either electron-electron or electron-lattice interactions. A number of widely used models are briefly discussed, as well as some pending questions., Comment: In French - Acte Ecole th\'{e}matique "Femto2004", Porquerolles, Sept. 2004

The studies of interaction of the UV photons with bulk and nanocristalline silicon by time-of-flight (TOF) mass-spectrometry allowed to reveal two populations of Si ion monomers. The first rapid population ejected even at low laser fluences is attributed to Colombian repulsion between the surface charges which are induced by emission of the photoelectrons. When the laser fluence increases, the second slow ion population appears. This population originates from the thermal processes in the irradiated material. The original result of this work is the observation of the non-thermal ion population which represents a considerable part of the laser-induced plume., Comment: In French

The spin glasses are disordered and frustrated magnetic systems. They show aging phenomena which are also a characteristic feature of structural glasses, polymers, dielectrics, colloids, etc. Under a strong enough magnetic field variation, spin glasses can be "rejuvenated", in the same way as glasses under a high enough stress. But spin glasses also display non-trivial "rejuvenation and memory" effects when they are submitted to temperature variations. Comparable phenomena have recently been identified in some polymers and gels, although less sharply pronounced. We propose to describe aging phenomena in disordered systems in terms of a combination of such "temperature-selective" effects with the more usual "temperature-cumulative" processes related to strong cooling rate effects., Comment: Paper in french, to appear in the Proceedings of the conference "Materiaux 2002", Tours (France) October 2002. 1 pdf file, 4 pages