Search

Graphene nanosheets (GNS) paper is widely regarded as a promising candidate for heat dissipation due to its outstanding thermal conductivity. However, the accompanied high electrical conductivity makes it unfavorable for thermal management of high power electronics since it runs a high risk of short circuits. To eliminate the risk from the high electrical conductivity and simultaneously maintain the excellent thermal performance, we introduce boron nitride nanosheets (BNNS) that possess high thermal conductivity but electrical insulation into the GNS paper. The hybrid paper has a much lower electrical conductivity but similar thermal performance compared to the pristine GNS paper. Besides, the flexible hybrid paper exhibits better thermal stability than pure GNS paper. Our results show that the ability of BNNS to change the electrical conductivity of paper without affecting its thermal conductivity is potential for the application of heat management materials with tailored electrical properties.

This work concerns studies of field electron emission (FE) from large area emitters. It discusses--and where possible corrects--several literature weaknesses related to the analysis of experimental current-voltage data and related emitter characterization, using a recent paper in Applied Surface Science to exemplify these weaknesses. One weakness, not detected in the published paper, is that current-density experiments and related theoretical predictions there differ by a large factor, in this case of order 10^(16). The work also shows that a recently introduced validity test--the "magic emitter" test--can be used, at the immediate-pre-submission or review stages, to help uncover scientific problems. More generally, in the literature of FE from large area emitters over the last 15 years or so, there appear to be many papers (perhaps hundreds of papers) with some or all of the weaknesses discussed. The scientific integrity of this research area, and of the related peer review processes, appear to be significantly broken, and attempts to correct the situation by the normal processes of science have had limited effect. There seems a growing case for independent wider investigation into research integrity issues of this general kind, and possibly for later action by Governments., Comment: 15 pages, 0 figures. Submitted for publication. v2 has typos corrected and conclusions section slightly extended

Plasmonic modes offer the potential to achieve PetaVolts per meter fields, that would transform the current paradigm in collider development in addition to non-collider searches in fundamental physics. PetaVolts per meter plasmonics relies on collective oscillations of the free electron Fermi gas inherent in the conduction band of materials that have a suitable combination of constituent atoms and ionic lattice structure. As the conduction band free electron density, at equilibrium, can be as high as $\rm 10^{24}cm^{-3}$, electromagnetic fields of the order of $\rm 0.1 \sqrt{\rm n_0(10^{24}cm^{-3})} ~ PVm^{-1}$ can be sustained by plasmonic modes. Engineered materials not only allow highly tunable material properties but quite critically make it possible to overcome disruptive instabilities that dominate the interactions in bulk media. Due to rapid shielding by the free electron Fermi gas, dielectric effects are strongly suppressed. Because the ionic lattice, the corresponding electronic energy bands and the free electron gas are governed by quantum mechanical effects, comparisons with plasmas are merely notional. Based on this framework, it is critical to address various challenges that underlie PetaVolts per meter plasmonics including stable excitation of plasmonic modes while accounting for their effects on the ionic lattice and the electronic energy band structure over femtosecond timescales. We summarize the ongoing theoretical and experimental efforts as well as map out strategies for the future. Extreme plasmonic fields can shape the future by not only bringing tens of TeV to multi-PeV center-of-mass-energies within reach but also by opening novel pathways in non-collider HEP. In view of this promise, we invite the scientific community to help realize the immense potential of PV/m plasmonics and call for significant expansion of the US and international R\&D program., Comment: contribution to Snowmass 2021

Non-Hermitian topology is a recent hot topic in condensed matters. In this paper, we propose a novel platform drawing interdisciplinary attention: rock-paper-scissors (RPS) cycles described by the evolutionary game theory. Specifically, we demonstrate the emergence of an exceptional point and a skin effect by analyzing topological properties of their payoff matrix. Furthermore, we discover striking dynamical properties in an RPS chain: the directive propagation of the population density in the bulk and the enhancement of the population density only around the right edge. Our results open new avenues of the non-Hermitian topology and the evolutionary game theory., Comment: 6+6 pages, 4+5 figures

We theoretically demonstrate the realization of a chiral edge mode in a system beyond natural science. Specifically, we elucidate that a kagome network of rock-paper-scissors (K-RPS) hosts a chiral edge mode of the population density which is protected by the non-trivial topology in the bulk. The emergence of the chiral edge mode is demonstrated by numerically solving the Lotka-Volterra (LV) equation. This numerical result can be intuitively understood in terms of cyclic motion of a single RPS cycle which is analogues to the cyclotron motion of fermions. Furthermore, we point out that a linearized LV equation is mathematically equivalent to the Schr\"odinger equation describing quantum systems. This equivalence allows us to clarify the topological origin of the chiral edge mode in the K-RPS; a non-zero Chern number of the payoff matrix induces the chiral edge mode of the population density, which exemplifies the bulk-edge correspondence in two-dimensional systems described by evolutionary game theory., Comment: 7 pages, 7 figures

Paper is the ideal substrate for the development of flexible and environmentally sustainable ubiquitous electronic systems, which, combined with two-dimensional materials, could be exploited in many Internet-of-Things applications, ranging from wearable electronics to smart packaging. Here we report high-performance MoS2 field-effect transistors on paper fabricated with a channel-array approach, combining the advantages of two large-area techniques: chemical vapor deposition and inkjet-printing.The first allows the pre-deposition of a pattern of MoS2; the second, the printing of dielectric layers, contacts, and connections to complete transistors and circuits fabrication. Average ION/IOFF of 8 x 10^3 (up to 5 x 10^4) and mobility of 5.5 cm2 V-1 s-1 (up to 26 cm2 V-1 s-1) are obtained. Fully functional integrated circuits of digital and analog building blocks, such as logic gates and current mirrors, are demonstrated, highlighting the potential of this approach for ubiquitous electronics on paper.

The problem of capillary transport in fibrous porous materials at low levels of liquid saturation has been addressed. It has been demonstrated, that the process of liquid spreading in this type of porous materials at low saturation can be described macroscopically by a similar super-fast, non-linear diffusion model as that, which had been previously identified in experiments and simulations in particulate porous media. The macroscopic diffusion model has been underpinned by simulations using a microscopic network model. The theoretical results have been qualitatively compared with available experimental observations using persistent liquids.

The realization of optoelectronic devices on paper has been an outstanding challenge due to the large surface roughness and incompatible nature of paper with optical materials. Here, we demonstrate a new class of optoelectronic devices on a piece of printing paper using graphene as an electrically reconfigurable optical medium. Our approach relies on electro-modulation of optical properties of multilayer graphene on paper via blocking the interband electronic transitions. The paper based devices yield high optical contrast in the visible spectrum with fast response speed. Pattering graphene into multiple pixels, folding paper into 3-dimensional shapes or printing coloured ink on paper substrates enable us to demonstrate novel optoelectronic devices which cannot be realized with wafer-based techniques., Comment: Work has been published in ACS Photonics. For supplementary information please follow the link http://pubs.acs.org/doi/abs/10.1021/acsphotonics.6b00017

A physical model for the simulation ink/paper interaction at the mesoscopic scale is developed. It is based on the modified Ising model, and is generalized to consider the restriction of the finite-volume of ink and also its dynamic seepage. This allows the model to obtain the ink distribution within the paper volume. At the mesoscopic scale, the paper is modeled using a discretized fiber structure. The ink distribution is obtained by solving its equivalent optimization problem, which is solved using a modified genetic algorithm, along with a new boundary condition and the quasi-linear technique. The model is able to simulate the finite-volume distribution of ink., Comment: 26 pages, 12 figures

Graphene-based papers attract particular interests recently owing to their outstanding properties, the key of which is their layer-by-layer hierarchical structures similar to the biomaterials such as bone, teeth and nacre, combining intralayer strong sp2 bonds and interlayer crosslinks for efficient load transfer. Here we firstly study the mechanical properties of various interlayer and intralayer crosslinks via first-principles calculations and then perform continuum model analysis for the overall mechanical properties of graphene-based papers. We find that there is a characteristic length scale l_{0}, defined as \Sqrt{Dh_{0}/4G}, where D is the stiffness of the graphene sheet, h_{0} and G are the height of interlayer crosslink and shear modulus respectively. When the size of the graphene sheets exceeds 3l_{0}, the tension-shear (TS) chain model that are widely used for nanocomposites fails to predict the overall mechanical properties of the graphene-based papers. Instead we proposed here a deformable tension-shear (DTS) model by considering the elastic deformation of the graphene sheets, also the interlayer and intralayer crosslinks. The DTS is then applied to predict the mechanics of graphene-based paper materials under tensile loading. According to the results we thus obtain, optimal design strategies are provided for designing graphene papers with ultrahigh stiffness, strength and toughness., Comment: 23 pages, 6 figures

The normal paper used in any printer is among the cheapest flexible organic materials that exist. We demonstrate that we can print on paper high-frequency circuits tunable with an applied dc voltage. This is possible with the help of an ink containing functionalized carbon nanotubes and water. After the water is evaporated from the paper, the nanotubes remain steadily imprinted on paper, showing a semiconducting behaviour and tunable electrical properties.

Here we give detailed derivations and provide additional examples to the main paper: arXiv:0706.0212. In particular, we discuss the scaling behavior of observables like correlation functions and density of excitations. We also analyze effects of nonintegrability of the Bose-Hubbard model on the long-time dynamics of the correlation functions. In addition we explicitly consider several interacting models, where we are able to analyze slow dynamics and classify it according to the regimes suggested in the main paper., Comment: 11 pages, 6 figures. The current version of the main paper arXiv:0706.0212 is not up to date according to the Nature Physics editorial policy

We introduce an effect of metallization of dielectric nanofilms by strong, adiabatically varying electric fields. The metallization causes optical properties of a dielectric film to become similar to those of a plasmonic metal (strong absorption and negative permittivity at low optical frequencies). The is a quantum effect, which is exponentially size-dependent, occurring at fields on the order of 0.1 V/A and pulse durations ranging from ~ 1 fs to ~ 10 ns for film thickness 3 to 10 nm., Comment: This is the Supplemental Material for Paper "Metallization of Nanofilms in Strong Adiabatic Electric Fields" arXiv:1007.2171v1 [cond-mat.mes-hall]

In this communication we present our response to the recent comment of A. Engel regarding our paper on FIB- fabricated Nb nanowires (see Vol. 20 (2009) Pag. 465302). After further analysis and additional experimental evidence, we conclude that our interpretation of the experimental results in light of QPS theory is still valid when compared with the alternative proximity-based model as proposed by A. Engel., Comment: 3 pages, 1 figure, accepted by Nanotechnology

As a particular application of the earlier proposed model of graphene as a macromolecule, we found the exact analytical expression of dispersion relation for the band of edge states in graphene zigzag ribbons. This band is often referred to as "dispersionless band" or "zero mode". The obtained result contrasts description of edge states given in the referenced paper, showing that the earlier given explanation is valid only for a very narrow region of values of the electron/hole wave vector, but for the rest, it is not correct., Comment: Editing

Recently von Delft (cond-mat/0510563v1)(JvD) has successfully re-derived our influence functional for interacting electrons and claimed that within our approach he was able to obtain the electron decoherence rate that vanishes at T=0. In this Comment we demonstrate that this JvD's claim is in error, as it is based on ambiguous and uncontrolled manipulations violating basic principles of quantum theory, such as energy-time uncertainty relation, causality, fluctuation-dissipation theorem, detailed balance and the like. We also briefly address insufficient approximations employed by Marquardt {\it et al.} (cond-mat/0510556v1) and by von Delft {\it et al.} (cond-mat/0510557v1) and demonstrate that the results of all three papers in the limit T=0 are inconsistent with simple rules of algebra., Comment: 7 pages, 1 figure

The fractions of constant conductivity, i, where the conductivity is ie^2/h are interpretted to arise from the summation of two frequencies, \omega_1+ \omega_2, type of processes so that the quantum Hall effect becomes a problem of spectroscopic energy levels. We describe the conversion of resistivity to the frequency spectrum. An effort is made to look at the recent articles from the Phys. Rev. Lett. 1998-2001, to see if there are any data which does not agree with our theory. It is found that all of the data agrees with our theory, The papers which claim to provide the theoretical base are found to be irrelevant to the experimental data., Comment: TeX pages, 2 jpg figures, 201 refs

Laughlin has found "exactly" the wave function which is ascribed to an excitation of fractional charge, such as e/3. We find that the exactness of the wave function is not destroyed by changing the charge to some other quantity such as the magnetic field. Thus e/3 and H can be replaced by e and H/3. Therefore, the wave function need not belong to quasiparticles of charge e/3., Comment: 8 pages TeX

In this paper, we present a reconfigurable multiplex (MUX) setup that increases the throughput of electrical characterisation at cryogenic temperature. The setup separates the MUX circuitry from quantum device under test (qDUT), allowing qDUT chips to be exchanged easily and MUX chips to be reused. To interface with different types of qDUTs, board-level designs are incorporated to allow interconnects flexibly routed into different topology. MUXs are built based on a multiple level selective gating (MLSG) scheme, where the number of multiplexed output channels (interconnects) is exponentially dependent on the number of control lines. In the prototype setup presented in this paper, with 14 out of 44 existing wires from room temperature, 4 MUXs at cryogenic temperature can supply in total 128 interconnects to interface with qDUTs. We validate the MUX setup operation and assess the various limits existed by measuring k$\Omega$ resistors made of $\mu$m-size graphene ribbons. We further demonstrate the setup by performing charge transport measurement on 128 nm-size graphene quantum devices in a single cooling down.

This paper is devoted to the construction of efficient (simple to implement) explicit semiclassical asymptotic eigenfunctions of the Dirac operator for high-energy bound states in graphene in magnetic field. When considering excited states in graphene, a distortion called trigonal warping begins to play an~important role, see [7], [12]. We are dealing with a~trigonal warping correction, considering it to be small. While the standard semiclassical methods allow one to solve the eigenequations for operators if and only if quantization conditions are met, we, based on article [1], develop approaches that can be used in case these conditions are violated. The complete symbol turns out to be only close to integrable, which brings its own difficulties. The present paper relies heavily on the results from [3]., Comment: 10 pages, 4 figures

The paper aims to reveal the relationship between the geometrical features and linear and nonlinear optical properties of InAs quantum dots (QDs). This problem is justified by the extreme variety offered by the recent advances in growth techniques tailored to the attainment of QDs and nanostructures with virtually any shape. To that end, the Finite Element Method in conjunction with the Effective Mass Approximation and Envelope Function Approximation was employed to solve the one-particle eigenproblems in domains with any complex geometries. The paper explores nanoplatelets, spherical QDs, nanocones, nanorods, nanotadpoles, and nanostars. It has been found that there is a clear correlation between the complexity and symmetry of the QDs and their linear and nonlinear absorption spectra for transitions between the electronic ground state and the first three excited states.

In this paper a thorough theoretical study of a new class of collective excitations, dubbed hyperbolic surface phonon plasmon polaritons, is performed. This new type of light-matter excitations are shown to have unique properties that allows to explore them both as the basis of ultra-sensitive devices to the dielectric nature of its surroundings. The system is a van der Waals heterostructure -- a layered metamaterial, composed of different 2D materials in direct contact one with another, namely graphene ribbons and hexagonal boron nitride slabs of nanometric size. In the paper we discuss the spectrum of these new class of excitations, the associated electromagnetic fields, the sensitivity to the dielectric function of its surroundings, and the absorption spectrum. All this is accomplished using an analytical model that considerably diminishes the computational burden, as well as elucidates the underling physical mechanism of the excitations supported by the device., Comment: 19 pages, 9 figures

Decades ago, Gurzhi proposed that if momentum-conserving collisions prevail among heat-carrying phonons in insulators and charge-carrying electrons in metals, hydrodynamic features will become detectable. In this paper, we will review the experimental evidence emerging in the last few years supporting this viewpoint and raising new questions. The focus of the paper will be bulk crystals without (or with a very dilute concentration) of mobile electrons and steady-state thermal transport. We will also discuss the possible link between this field of investigation and other phenomena, such as the hybridization of phonon modes and the phonon thermal Hall effect., Comment: A contribution to the special issue of Fizika Nizkikh Temperatur commemorating Radii Gurzhi; 10 pages, 6 figures

Uncovering pathways to optically drive magnetic order-disorder transitions on ultrashort timescales can lead to the realization of novel out-of-equilibrium quantum phenomena. A long-sought pathway is to directly excite a highly non-thermal energy-momentum distribution of magnons, bypassing both charge and lattice degrees of freedom. However, this remains elusive owing to the weak coupling and large momentum mismatch between photons and magnons. Here we demonstrate strong parametric excitation of magnons across the entire Brillouin zone of the antiferromagnetic insulator Sr$_2$Cu$_3$O$_4$Cl$_2$ by periodically modulating the superexchange interaction with the electric field of light. The excitation efficiency is greatly enhanced by tuning to the van Hove singularity in the magnon spectrum, sufficient to transiently collapse the antiferromagnetic state using a pulsed laser field of 10$^9$ V/m. The order parameter recovery timescale increases by over 1000 times as a function of excitation density, reflecting a crossover from high- to low-energy magnon dominated decay dynamics. This electric-field induced parametric magnon pumping mechanism is applicable to a broad range of magnetic insulators and opens up the possibility of dynamically engineering magnon distributions by design., Comment: The submitter did not obtain approval from all authors to post this paper. Jun-Yi Shan does not approve of posting this paper

The paper analyzes theoretically the influence of fullerenes on the characteristics of $\mathrm{Al/C}_{60}$ composites. The molecular dynamics method is used to study the dependences of density and stiffness constants on the concentration of inclusions, and to calculate the values of the bulk and shear moduli for isotropic polycrystalline nanocomposites. The analysis shows that interfacial interaction significantly affects the properties of nanocomposites. This effect can be taken into account within the framework of the theory of heterogeneous media using the interphase layer model. The properties of the interphase layer are determined by interfacial interaction and can be calculated by approximating the results of molecular dynamics calculations. Using assumptions about the simplified form of the two-particle distribution function allows the interfacial interaction energy to be calculated and the interphase layer properties to be assessed analytically. The paper compares numerical results and analytical estimates, and discusses the validity of the approximations used. The analysis performed on the example of an $\mathrm{Al/C}_{60}$ composite material demonstrates the feasibility of using the analytical model of the interphase layer to estimate the effective density and elastic moduli of heterogeneous media with nano-inhomogeneities., Comment: 12 pages, 4 figures, 2 tables

This paper delves into the origins and specificity of the unique stable spin textures (360{\deg} closed loop domain walls and skyrmions) observed in exchange-biased systems, with either in-plane or out-of-plane magnetic anisotropy. In the case of skyrmions, which are nanometer-sized bubbles consisting of closed-loop 180{\deg} walls in perpendicularly-magnetized media, the stability of these spin textures arises from the existence of Dzyaloshinskii-Moriya Interactions (DMI). These interactions induce chirality of the domain walls, yielding to some extent a so-called topological protection. More complex structures such as skyrmoniums have been observed, consisting of closed loop 360{\deg} walls. Recently, skyrmions formed in the absence of an applied external magnetic field have been stabilized in exchange biased out-of-plane magnetized systems. About two decades ago, another type of stable spin-textures were observed in exchange biased systems, with in-plane magnetization, in particular in the pinned reference layer of spin-valves. These textures consist of 360{\deg}-domain-wall rings, the stability of which arises from the easy-plane shape anisotropy of these layers. In this paper, we compare these spin-textures and highlight the similarities and differences in their formation, structure and origin of their stability.

In this theoretical study, we focus on the high-frequency response of the electrothermal NbO2-Mott threshold switch, a real-world electronic device, which has been proved to be relevant in several applications and is classified as a volatile memristor. Memristors of this kind, have been shown to exhibit distinctive non-linear behaviors crucial for cutting-edge neuromorphic circuits. In accordance with well-established models for these devices, their resistances depend on their body temperatures, which evolve over time following Newton's Law of Cooling. Here, we demonstrate that HP's NbO2-Mott memristor can manifest up to three distinct steady-state oscillatory behaviors under a suitable high-frequency periodic voltage input, showcasing increased versatility despite its volatile nature. Additionally, when subjected to a high-frequency periodic voltage signal, the device body temperature oscillates with a negligible peak-to-peak amplitude. Since, the temperature remains almost constant over an input cycle, the devices under study behave as linear resistors during each input cycle. Based on these insights, this paper presents analytical equations characterizing the response of the NbO2-Mott memristor to high-frequency voltage inputs, demarcating regions in the state space where distinct initial conditions lead to various asymptotic oscillatory behaviors. Importantly, the mathematical methods introduced in this manuscript are applicable to any volatile electrothermal resistive switch. Additionally, this paper presents analytical equations that accurately reproduce the temperature time-waveform of the studied device during both its transient and steady-state phases when subjected to a zero-mean sinusoidal voltage input oscillating in the high-frequency limit.

This paper reviews the new highly interdisciplinary research field studying the behavior of condensed matter systems exposed to radiation. The paper highlights several relevant examples of recent advances in the field and provides a roadmap for the development of the field in the next decade. Condensed matter systems exposed to radiation may have very different natures, being inorganic, organic or biological, finite or infinite, be composed of many different molecular species or materials, existing in different phases (solid, liquid, gaseous or plasma) and operating under different thermodynamic conditions. The essential and novel element of this research is that, despite the vast diversity of such systems, many of the key phenomena related to the behavior of irradiated systems (such as radiation-induced damage, mechanisms of damage repair and control, radiation protection, etc.) are very similar and can be understood based on the same fundamental theoretical principles and computational approaches. One of the essential features of the aforementioned phenomena concerns their multiscale nature as the manifestation of the radiation-induced effects occurring at different spatial and temporal scales ranging from the atomic to the macroscopic. The multiscale nature of the effects and similarity of their manifestation in systems of different origins necessarily brings together different disciplines, such as physics, chemistry, biology, materials and nano-science, and biomedical research, demonstrating numerous interlinks and commonalities between them. This research field is highly relevant to many novel and emerging technologies and medical applications., Comment: Roadmap paper; 376 pages, 32 figures. Submitted to Chemical Reviews

The electronic structure and interactions of kagome materials such as 1:1 (FeGe class) and 1:6:6 (MgFe$_6$Ge$_6$ class) are complicated and involve many orbitals and bands at the Fermi level. Current theoretical models treat the systems in an $s$-orbital kagome representation, unsuited and incorrect both quantitatively and qualitatively to the material realities. In this work, we lay the basis of a faithful framework of the electronic model for this large class of materials. We show that the complicated ``spaghetti" of electronic bands near the Fermi level can be decomposed into three groups of $d$-Fe orbitals coupled to specific Ge orbitals. Such decomposition allows for a clear analytical understanding (leading to different results than the simple $s$-orbital kagome models) of the flat bands in the system based on the $S$-matrix formalism of generalized bipartite lattices. Our three minimal Hamiltonians can reproduce the quasi-flat bands, van Hove singularities, topology, and Dirac points close to the Fermi level, which we prove by extensive ab initio studies. We also obtain the interacting Hamiltonian of $d$ orbitals in FeGe using the constraint random phase approximation (cRPA) method. We then use this as a fundamental ``LEGO"-like building block for a large family of 1:6:6 kagome materials, which can be obtained by doubling and perturbing the FeGe Hamiltonian. We applied the model to its kagome siblings FeSn and CoSn, and also MgFe$_6$Ge$_6$. Our work serves as the first complete framework for the study of the interacting phase diagram of kagome compounds., Comment: 5+50 pages, 3+16 figures, previously submitted. This is the second paper of a series on kagome materials. See also the first paper: arXiv:2305.15469

Recent experiments performed the nonreciprocal magneotransport in ZrTe$_5$ and obtained a giant magnetochiral anisotropy (MCA) coefficient $\gamma'$. The existing theoretical analysis was based on the semiclassical Boltzmann equation. In this paper, we develop a full quantum theory to calculate $\gamma'$ and further explore the underlying physics. We reveal that the $xz$-mirror symmetry breaking term also breaks the parity symmetry of the system and leads to mixed selection rules and nonvanishing second-order conductivity $\sigma_{xxx}$. The calculations show that $\gamma'$ decreases with the magnetic field, survives only to weak impurity scatterings, and exhibits a nonmonotonous dependence on the strength of the $xz$-mirror symmetry breaking. Our paper can provide a deeper insight into the intrinsic nonreciprocal magnetotransport phenomena in the topological semimetal material., Comment: 8 pages, 4 figures

We observe significant, 6.5 - 12%, differences between skyrmion and antiskyrmion Hall angles in existing experimental data. To account for them, the Thiele equation is generalized with the transverse velocity component in the collective coordinate of magnetization vector. The corresponding generalized Hall angle is formulated, and its consequences are compared to the data. A plausible physical origin is provided for explaining the Hall angle differences., Comment: 2 pages, 3 figures

Beyond the extensively studied microcavity polaritons, which are coupled modes of semiconductor excitons and microcavity photons, nearly 2D semiconductors placed in a suitable environment can support spatially localized exciton-polariton modes. We demonstrate theoretically that two distinct types of such modes can exist in a photonic crystal with an embedded transition metal dichalcogenide (TMD) monolayer and derive an equation that determines their dispersion relations. The localized modes of two types occur in the zeroth- and first-order stop-bands of the crystal, respectively, and have substantially different properties. The latter type of the localized modes, which appear inside the light cone, can be described as a result of coupling of the TMD exciton and an optical Tamm state of the TMD-intercalated photonic crystal. We suggest an experiment for detecting these modes and simulate it numerically., Comment: 2021 Optica Publishing Group. One print or electronic copy may be made for personal use only. Systematic reproduction and distribution, duplication of any material in this paper for a fee or for commercial purposes, or modifications of the content of this paper are prohibited

The generation, manipulation, storage, and detection of single photons play a central role in emerging photonic quantum information technology. Individual photons serve as flying qubits and transmit the quantum information at high speed and with low losses, for example between individual nodes of quantum networks. Due to the laws of quantum mechanics, quantum communication is fundamentally tap-proof, which explains the enormous interest in this modern information technology. On the other hand, stationary qubits or photonic states in quantum computers can potentially lead to enormous increases in performance through parallel data processing, to outperform classical computers in specific tasks when quantum advantage is achieved. Here, we discuss in depth the great potential of quantum dots (QDs) in photonic quantum information technology. In this context, QDs form a key resource for the implementation of quantum communication networks and photonic quantum computers because they can generate single photons on-demand. Moreover, QDs are compatible with the mature semiconductor technology, so that they can be integrated comparatively easily into nanophotonic structures, which form the basis for quantum light sources and integrated photonic quantum circuits. After a thematic introduction, we present modern numerical methods and theoretical approaches to device design and the physical description of quantum dot devices. We then present modern methods and technical solutions for the epitaxial growth and for the deterministic nanoprocessing of quantum devices based on QDs. Furthermore, we present the most promising concepts for quantum light sources and photonic quantum circuits that include single QDs as active elements and discuss applications of these novel devices in photonic quantum information technology. We close with an overview of open issues and an outlook on future developments., Comment: Copyright 2023 Optica Publishing Group. One print or electronic copy may be made for personal use only. Systematic reproduction and distribution, duplication of any material in this paper for a fee or for commercial purposes, or modifications of the content of this paper are prohibited

A numerical model based on a lumped circuit element approximation for a bi-superconducting quantum interference device (bi-SQUID) operating in the presence of an external magnetic field is presented in this paper. Included in the model is the novel ability to capture the resultant behaviour of the device when a strong electric field is applied to its Josephson junctions by utilising gate electrodes. The model is used to simulate an all-metallic SNS (Al-Cu-Al) bi-SQUID, where good agreement is observed between the simulated results and the experimental data. The results discussed in this work suggest that the primary consequences of the superconducting field effect induced by the gating of the Josephson junctions are accounted for in our minimal model; namely, the suppression of the junctions super-current. Although based on a simplified semi-empirical model, our results may guide the search for a microscopic origin of this effect by providing a means to model the voltage response of gated SQUIDs. Also, the possible applications of this effect regarding the operation of SQUIDs as ultra-high precision sensors, where the performance of such devices can be improved via careful tuning of the applied gate voltages, are discussed at the end of the paper., Comment: 8 pages, 4 figures

In scenarios coined Maxwell's demon, information on microscopic degrees of freedom is used to seemingly violate the second law of thermodynamics. This has been studied in the classical as well as the quantum domain. In this paper, we study an implementation of Maxwell's demon that can operate in both domains. In particular, we investigate information-to-work conversion over the quantum-to-classical transition. The demon continuously measures the charge state of a double quantum dot, and uses this information to guide electrons against a voltage bias by tuning the on-site energies of the dots. Coherent tunneling between the dots allows for the buildup of quantum coherence in the system. Under strong measurements, the coherence is suppressed, and the system is well-described by a classical model. As the measurement strength is further increased, the Zeno effect prohibits interdot tunneling. A Zeno-like effect is also observed for weak measurements, where measurement errors lead to fluctuations in the on-site energies, dephasing the system. We anticipate similar behaviors in other quantum systems under continuous measurement and feedback control, making our results relevant for implementations in quantum technology and quantum control.

Indium selenide, In2Se3, has recently attracted growing interest due to its novel properties, including room temperature ferroelectricity, outstanding photoresponsivity, and exotic in-plane ferroelectricity, which open up new regimes for next generation electronics. In2Se3 also provides the important advantage of tuning the electrical properties of ultra-thin layers with an external electrical and magnetic field, making it a potential platform to study novel two-dimensional physics. Yet, In2Se3 has many different polymorphs, and it has been challenging to synthesize single-phase material, especially using scalable growth methods, as needed for technological applications. In this paper, we use aberration-corrected scanning transmission electron microscopy to characterize the microstructure of twin-free single-phase ultra-thin layers of beta-In2Se3, prepared by a unique molecular beam epitaxy approach. We emphasize features of the In2Se3 layer and In2Se3/InP interface which provide evidence for understanding the growth mechanism of the single-phase In2Se3. This novel approach for forming high-quality twin-free single phase two-dimensional crystals on InP substrates is likely to be applicable to other technologically important substrates., Comment: 19 pages, 4 figures

Superconducting circuits based on hybrid InAs Josephson Junctions (JJs) play a starring role in the design of fast and ultra-low power consumption solid-state quantum electronics and exploring novel physical phenomena. Conventionally, 3D substrates, 2D quantum wells (QWs), and 1D nanowires (NWs) made of InAs are employed to create superconductive circuits with hybrid JJs. Each platform has its advantages and disadvantages. Here, we proposed the InAs-on-insulator (InAsOI) as a groundbreaking platform for developing superconducting electronics. An epilayer of semiconductive InAs with different electron densities was grown onto an InAlAs metamorphic buffer layer, efficiently used as a cryogenic insulator to decouple adjacent devices electrically. JJs with various lengths and widths were fabricated employing Al as a superconductor and InAs with different electron densities. We achieved a switching current density of 7.3 uA/um, a critical voltage of 50-to-80 uV, and a critical temperature equal to that of the superconductor used. For all the JJs, the switching current follows a characteristic Fraunhofer pattern with an out-of-plane magnetic field. These achievements enable the use of InAsOI to design and fabricate surface-exposed Josephson Field Effect Transistors with high critical current densities and superior gating properties., Comment: 19 pages, 4 figures, supporting information at the end of the paper

In this paper, we study the intrinsic contribution of nonlinear magnon thermal Hall Effect. We derive the intrinsic second order thermal Hall conductivity of magnon by the thermal scalar potential (TSP) method and the thermal vector potential (TVP) method. We find that the intrinsic second order magnon thermal Hall conductivity is related to the thermal Berry-connection polarizability (TBCP). We apply our theory to the monolayer ferromagnetic Hexagonal lattice, and we find that the second order magnon thermal Hall conductivity can be controlled by changing Dzyaloshinskii-Moriya strength and applying strain., Comment: 15 pages, 5 figures

Magnetic skyrmions, as scalable and non-volatile spin textures, can dynamically interact with fields and currents, making them promising for unconventional computing. This paper presents a neuromorphic device based on skyrmion manipulation chambers to implement spike-timing-dependent plasticity (STDP), a mechanism for unsupervised learning in brain-inspired computing. STDP adjusts synaptic weights based on the timing of pre- and post-synaptic spikes. The proposed three-chamber design encodes synaptic weight in the number of skyrmions in the center chamber, with left and right chambers for pre-synaptic and post-synaptic spikes. Micromagnetic simulations demonstrate that the timing between applied currents across the chambers controls the final skyrmion count (weight). The device exhibits adaptability and learning capabilities by manipulating chamber parameters, mimicking Hebbian and dendritic location-based plasticity. The device's ability to maintain state post-write highlights its potential for advancing adaptable neuromorphic devices.

Biased bilayer graphene (BBG) is an important system for studies of excitonic effects in graphene--based systems, with its easily tunable bandgap. This bandgap is governed by an external gate voltage, allowing one to tune the optical response of the system. In this paper, we study the excitonic linear and nonlinear optical response of Bernal stacked BBG as a function of the gate voltage, both for in--plane (IP) and out--of--plane (OOP) directions. Based on a semi-analytical model of the electronic structure of BBG describing the influence of gate voltage on excitonic binding energies, we focus our discussion on both the IP and OOP excitonic response. Both linear and second harmonic generation (SHG) nonlinear responses are shown to be very sensitive to the gate voltage, as both the interband momentum matrix elements and the bandgap of the system will vary greatly with bias potential., Comment: 18 pages, 8 figures

We study the effect of periodic hopping modulation on a Su-Schrieffer-Heeger (SSH) chain that exhibits non-Hermiticity in presence of an onsite staggered imaginary potential. This dissipative, non-Hermitian (NH) extension amply modifies the features of the topological trivial phase (TTP) and the topological nontrivial phase (TNP) of the SSH chain. Though a weak potential can respect the parity-time ($\mathcal{PT}$) symmetry keeping the energy eigenvalues real, a strong potential breaks $\mathcal{PT}$ conservation leading to imaginary end state and complex bulk state energies in the system. Furthermore for large commensurate periodicity of the hopping, in-gap states appear that take either purely real or purely imaginary eigenvalues depending on the strenth of both NH potential and hopping modulation. In particular, this paper is engaged with hopping periodicities of 2, 4 and 8 lattice spacings. The localization of end states and in-gap states at the boundaries are investigated for those hopping periodicities. Though we find that topology and $\mathcal{PT}$ symmetry are not very directly connected, distinguishing distribution of $\mathcal{PT}$ broken and unbroken phases are clearly observed within TNP and TTP in our systems., Comment: First Draft

Ultralow dimensionality of 2D layers magnifies their sensitivity to adjacent charges enabling even postprocessing electric control of multifunctional structures. However, functionalizing 2D layers remains an important challenge for on-demand device property exploitation. Here we report that an electrical and even fully optical way to control and write modifications to the magnetoresistive response of CVD-deposited graphene is achievable through the electrostatics of the photoferroelectric substrate. For electrical control, the ferroelectric polarization switch modifies graphene magnetoresistance by 67% due to a Fermi level shift with related modification in charge mobility. A similar function is also attained entirely by the bandgap light due to the substrate photovoltaic effect. Moreover, an all-optical way to imprint and recover graphene magnetoresistance by light is reported as well as magnetic control of graphene transconductance. These findings extend photoferroelectric control in 2D structures to new a magnetic dimension and advance wireless operation for sensors and field-effect transistors., Comment: 7 pages, 6 figures, journal paper

Symmetry in mixed quantum states can manifest in two distinct forms: strong symmetry, where each individual pure state in the quantum ensemble is symmetric with the same charge, and weak symmetry, which applies only to the entire ensemble. This paper explores a novel type of spontaneous symmetry breaking (SSB) where a strong symmetry is broken to a weak one. While the SSB of a weak symmetry is measured by the long-ranged two-point correlation function $\mathrm{Tr}(O_xO^{\dagger}_y\rho)$, the strong-to-weak SSB (SW-SSB) is measured by the fidelity $F(\rho, O_xO^{\dagger}_y\rho O_yO^{\dagger}_x)$, dubbed the fidelity correlator. We prove that SW-SSB is a universal property of mixed-state quantum phases, in the sense that the phenomenon of SW-SSB is robust against symmetric low-depth local quantum channels. We argue that a thermal state at a nonzero temperature in the canonical ensemble (with fixed symmetry charge) should have spontaneously broken strong symmetry. Additionally, we study non-thermal scenarios where decoherence induces SW-SSB, leading to phase transitions described by classical statistical models with bond randomness. In particular, the SW-SSB transition of a decohered Ising model can be viewed as the "ungauged" version of the celebrated toric code decodability transition. We confirm that, in the decohered Ising model, the SW-SSB transition defined by the fidelity correlator is the only physical transition in terms of channel recoverability. We also comment on other (inequivalent) definitions of SW-SSB, through correlation functions with higher R\'enyi indices., Comment: 15+5 pages, 4 figures

Many-body electron-hole complexes in a semiconductor are important both from a fundamental physics point of view and for practical device applications. A three-body system of electrons (e) and holes (h) (2e1h, or 1e2h) in a two-band semiconductor is commonly believed to be associated with two spectral peaks for the exciton and trion (or charged exciton), respectively. But both the validity of this understanding and the physical meaning of a trion or charged exciton have not been thoroughly examined. From the physics point of view, there are two different configurations, (e)(eh) or (eeh), which could be considered charged exciton and trion, respectively. Here (...) represents an irreducible cluster with respect to Coulomb interactions. In this paper, we consider these issues related to the 2e1h three-body problem theoretically and experimentally using monolayer MoTe2 as an example. Our theoretical tools involve the three-body Bethe-Salpeter Equation (BSE) and the cluster expansion technique, especially their correspondence. Experimentally, we measure the photoluminescence spectrum on a gate-controlled monolayer MoTe2. We found two spectral peaks that are 21 and 4 meV, respectively, below the exciton peak, in contrast to the single "trion" peak from the conventional understanding. We show that, while the three-body BSE in a two-band model can reproduce all spectral features, the cluster-expansion technique shows that the two peaks correspond to the charged exciton (e)(eh) and trion (eeh), respectively. In other words, there is a spectral splitting due to the two different many-body configurations. Furthermore, we find that the trion only exists in the intervalley case, while the charged exciton exists both for the intervalley and intravalley cases.

Surface diffusion and surface electromigration may lead to a morphological instability of thin solid films and nanowires. In this paper two nonlinear analyzes of a morphological instability are developed for a single-crystal cylindrical nanowire that is subjected to the axial current. These treatments extend the conventional linear stability analyzes without surface electromigration, that manifest a Rayleigh-Plateau instability. A weakly nonlinear analysis is done slightly above the Rayleigh-Plateau (longwave) instability threshold. It results in a one-dimensional Sivashinsky amplitude equation that describes a blow-up of a surface perturbation amplitude in a finite time. This is a signature of a formation of an axisymmetric spike singularity of a cylinder radius, which leads to a wire pinch-off and separation into a disjoint segments. The scaling analysis of the amplitude spike singularity is performed, and the time-and-electric field-dependent dimensions of the spike are characterized. A weakly nonlinear multi-scale analysis is done at the arbitrary distance above a longwave or a shortwave instability threshold. The time-and-electric field-dependent Fourier amplitudes of the major instability modes are derived and characterized.

In this paper we study the topology of the bands of a polaritonic crystal composed of graphene and of a metallic grating. We first derive a Kronig--Penney type of equation for the polaritonic bands as function of the Bloch wavevector and discuss the propagation of the surface plasmon polaritons on the polaritonic crystal using a transfer-matrix approach. Secondly, we reformulate the problem as a tight-binding model that resembles the Su--Schrieffer-Heeger (SSH) Hamiltonian, one difference being that the hopping amplitudes are, in this case, energy dependent. In possession of the tight-binding equations it is a simple task to determine the topology of the bands. Similarly to the SSH model, we show that there is a tunable parameter that induces topological phase transitions from trivial to non-trivial. In our case, it is the distance $d$ between the graphene sheet and the metallic grating. We note that $d$ is a parameter that can be easily tuned experimentally simply by controlling the thickness of the spacer between the grating and the graphene sheet. It is then experimentally feasible to engineer devices with the required topological properties., Comment: 14 pages

A remarkable feature of topological superconductors is the emergence of Majorana fermions in electron systems. Whereas the emergent Majorana fermions share the self-anti-particle property with Majorana fermions in particle physics, they may have essentially different electromagnetic properties. In this paper, we argue the electromagnetic response of spinful Majorana fermions in topological superconductors. We present a general theory of the electromagnetic response of spinful Majorana fermions in topological superconductors and clarify how the pairing symmetry is encoded in the electromagnetic response. As an application, we predict the sublattice-dependent dipole (Ising)-type magnetic response of corner Majorana fermions in iron-based superconductors., Comment: 22 pages, 4 figures

Recent theoretical investigations have revealed unconventional transport mechanisms within high Brilliouin zones of two-dimensional superlattices. Electrons can navigate along channels we call superwires, gently guided without brute force confinement. Such dynamical confinement is caused by weak superlattice deflections, markedly different from the static or energetic confinement observed in traditional wave guides or one-dimensional electron wires. The quantum properties of superwires give rise to elastic dynamical tunneling, linking disjoint regions of the corresponding classical phase space, and enabling the emergence of several parallel channels. This paper provides the underlying theory and mechanisms that facilitate dynamical tunneling assisted by chaos in periodic lattices. Moreover, we show that the mechanism of dynamical tunneling can be effectively conceptualized through the lens of a paraxial approximation. Our results further reveal that superwires predominantly exist within flat bands, emerging from eigenstates that represent linear combinations of conventional degenerate Bloch states. Finally, we quantify tunneling rates across various lattice configurations, and demonstrate the tunneling can be suppressed in a controlled fashion, illustrating potential implications in future nanodevices., Comment: 12 pages, 6 Figures

The luminescent mechanism of nano-sized materials with indirect bandgap and parity-forbidden transition has always been a critical issue in breaking through bottlenecks in traditional luminescent materials. The lack of understanding has resulted in great disputes regarding the origin of fluorescence in weak-transition nanocrystals (NCs). This paper proposes a new physical luminescence model, named as localized state-induced enhanced emission (LIEE), i.e., localized processes induced by size-limitation or partial doping, to explain the anomalous luminescence from non-luminescent state to luminescent state in various perovskite nanocrystals with indirect/direct bandgap or parity-forbidden transition. These findings provide a theoretical viewpoint to design efficient lead-free perovskite NCs and promote the development of fast optical transitions in luminescent materials.

Transition-metal dichalcogenides (TMDs) show unique physical, optical, and electronic properties. The known phases of TMDs are 2H and 3R in bulk form, 1T and associated reconstructions, and 1H in monolayer form. This paper reports a hypothetical phase, 9R, that may exist in TMDs (Mo, W)(S, Se, Te)$_2$, meeting both dynamical stability and elastic stability criteria. 9R phase has the same space group as 3R, $i.e.$ rhombohedral $R3m$ without inversion symmetry, and has 9 layers in a conventional unit cell. We find that 9R has an energy within 1 meV per formula unit of 3R and can be energetically favored by a particular strain condition. We further calculate the electronic, elastic, piezoelectric, Raman, and second-harmonic generation signatures of 9R TMDs and compare them with the corresponding 2H and 3R phases. 9R has similar properties to 3R but shows distinctive Raman peaks in the low-frequency regime, improved piezoelectric properties, and unique band splitting arising from layer coupling at the conduction band minimum. These distinct properties make 9R an attractive candidate for applications in piezotronics and valleytronics., Comment: 28 pages, 12 figures, 7 tables