Search

We have investigated a rock-scissors-paper model with long-range-directed interactions in two dimensions where every site has four outgoing links but a fraction qof the outgoing links to the nearest neighbour sites are rewired to other long-distance sites chosen randomly and the lattice structure is replaced again after a Monte Carlo step. It is found that, with qincreasing, the system changes from a three species coexistence self-organizing state to a global oscillation state and then to one of the homogeneous states. However when qexceeds a third threshold value, the system returns to a self-organizing state. When we restrict the maximum number of ingoing links of a site to four, the last self-organizing state disappears, the system stays in the homogeneous state forever after qexceeds the second threshold value. And when we restrict the maximum number of ingoing links of a site to five or six, the system exhibits a transition from the homogeneous state to a global oscillation state again and then to the last self-organizing state with qincreasing. The comparison of results on different networks suggests that the sites with zero ingoing links should play a significant role in the emergences of the later self-organizing state and the subsequent global oscillation. [ABSTRACT FROM AUTHOR]

The inability to extract spatial axis and radial multi-error coupling phenomenon exists in the process of axial profile reconstruction, which is essentially a first harmonic suppression problem as well as a multi-error decoupling problem. In this paper, a four-probe system is constructed based on an L-shaped arrangement in two adjacent planes. First, the mathematical model of the first harmonic suppression problem of the shaft system is established in the first plane, and the first harmonic component of roundness error is used as the axial reference for reconstructing the profile, and the value of the first-order harmonic component is solved by theoretical derivation, and the spatial axis of the reconstructed shaft system profile is fitted with it, which proves the correctness of the established mathematical model by the data simulation. Then, the radial mixed error detection is carried out in two adjacent planes in the axial direction, and the results measured at the two measurement positions are analyzed theoretically to obtain the tilt error decoupling formula. It breaks through the limitation that the error separation online detection cannot be performed in the standard ball measurement method. The experiment verifies that the accuracy of the spatial axis is improved by up to 0.5 μm after decoupling the tilt error, and the accuracy of the reconstructed circularity profile of a single section is improved by up to 2.657 mm. In the comparison experiment with the standard ball measurement method, the difference of the measured roundness error between the two methods does not exceed 1.2 μm, which proves that the online inspection method proposed in this paper can guarantee the accuracy of the reconstructing circularity profile. [ABSTRACT FROM AUTHOR]

In this paper, the analytical and numerical solutions of a non-steady state mathematical model are developed and analyzed. The mathematical model development of a non-steady state heat transport for a one-dimensional system is shown, and the analytical solution of the model is presented. The numerical solution of the model, using the finite element method (FEM), is compared to its analytical solution, proving its consistency. One of the advantages of using numerical tools is that more complex solutions can be obtained, even if the corresponding analytical solution does not exist or is not known, which is useful for engineering students. To demonstrate the applications and possibilities of this work, it is shown that changing the boundary conditions, geometry, or dimension in the system and the mathematical model, it can be solved through a numerical solution method. This is easier and more comprehensive for students rather than facing the complexity of the analytical solutions. The paper shows that it is possible to use the FEM in a university teaching context to complementarily explain the underlying physical phenomena of an engineering problem, here applied to a heat transfer problem in a vegetable. [ABSTRACT FROM AUTHOR]

Peak height detection is critical for blade tip clearance (BTC) measurement based on capacitive probes. However, the noise interference of the complicated working environments and instabilities of the rotation speed make high-precision peak detection a challenge. To solve this problem, a novel self-adaptive, multi-peak detection algorithm is proposed in this paper. The adaptive dual thresholds are used to identify the single peak and pre-estimate its peak parameters for the segmentation of the peak support region and the selection basis of the wavelet parameters. Then, based on the prior pre-estimation information, the wavelet matching is performed on the segmented single peak adaptively for eight times, and the derived mathematical models of the wavelet matching are fitted using the obtained matching coefficients to get precise peak parameters such as peak height and peak position. The blade tip clearance is calculated from the peak height through the calibration curve. The experiments show that the BTC measurement error of the proposed algorithm is under 15 μm, with the clearance ranging from to , and the proposed algorithm has preferable stability to comparable algorithms with the rotation speed ranging from 1000 rpm to 4000 rpm. This implies that the proposed algorithm has high anti-noise performance and good adaptability to rotation speed change. [ABSTRACT FROM AUTHOR]

The authors comments on the paper "An analytic functional form for characterization and generation of axisymmetric plasma boundaries." They mention that the proposed alternative form describe boundaries in the axisymmetric plasma between an X-point and D-shaped ones and can be used to study fusion plasmas.

In the present work, we report a stereovision system with one single camera. The configuration has only one single camera in front of which a biprism is placed. A new mathematical model based on optical geometrical optics is proposed for a single-lens biprism-based (SLBB) stereovision system in this paper. The path of each ray in three-dimensional (3D) space is tracked precisely, and the intersection of the rays is determined by an optimization method. Under the assumption of pinhole imaging, the 3D coordinate of the measuring point can be obtained through this model. Further, the model has been examined and verified by experiment. The experimental results show that the mathematical model can effectively measure the depth of the measuring points and the relative distance between measuring points. The deviation between the reconstruction results of the measuring point and the real 3D coordinate shows a certain regularity with the changing of the distance between the measuring point and the camera. [ABSTRACT FROM AUTHOR]

Objective. Measuring the respiratory signal from a video based on body motion has been proposed and recently matured in products for contactless health monitoring. The core algorithm for this application is the measurement of tiny chest/abdominal motions induced by respiration (i.e. capturing sub-pixel displacement caused by subtle motion between subsequent video frames), and the fundamental challenge is motion sensitivity. Though prior art reported on the validation with real human subjects, there is no thorough or rigorous benchmark to quantify the sensitivities and boundary conditions of motion-based core respiratory algorithms. Approach. A set-up was designed with a fully-controllable physical phantom to investigate the essence of core algorithms, together with a mathematical model incorporating two motion estimation strategies and three spatial representations, leading to six algorithmic combinations for respiratory signal extraction. Their promises and limitations are discussed and clarified through the phantom benchmark. Main results. With the variation of phantom motion intensity between 0.5 mm and 8 mm, the recommended approach obtains an average precision, recall, coverage and MAE of 88.1%, 91.8%, 95.5% and 2.1 bpm in the day-light condition, and 81.7%, 90.0%, 93.9% and 4.4 bpm in the night condition. Significance. The insights gained in this paper are intended to improve the understanding and applications of camera-based respiration measurement in health monitoring. The limitations of this study stem from the used physical phantom that does not consider human factors like body shape, sleeping posture, respiratory diseases, etc., and the investigated scenario is focused on sleep monitoring, not including scenarios with a sitting or standing patient like in clinical ward and triage. [ABSTRACT FROM AUTHOR]

A physico-mathematical model of open systems proposed in a previous paper (Delle Site and Klein 2020 J. Math. Phys. 61 083102) can represent a guiding reference in designing an accurate simulation scheme for an open molecular system embedded in a reservoir of energy and particles. The derived equations and the corresponding boundary conditions are obtained without assuming the action of an external source of heat that assures thermodynamic consistency of the open system with respect to a state of reference. However, in numerical schemes the temperature in the reservoir must be controlled by an external heat bath otherwise thermodynamic consistency cannot be achieved. In this perspective, the question to address is whether the explicit addition of an external heat bath in the theoretical model modifies the equations of the open system and its boundary conditions. In this work we consider this aspect and explicitly describe the evolution of the reservoir employing the Bergmannâ€"Lebowitz statistical model of thermostat. It is shown that the resulting equations for the open system itself are not affected by this change and an example of numerical application is reviewed where the current result shows its conceptual relevance. Finally, a list of pending mathematical and modelling problems is discussed the solution of which would strengthen the mathematical rigour of the model and offer new perspectives for the further development of a new multiscale simulation scheme. [ABSTRACT FROM AUTHOR]

A looping pendulum is a setup that consists of two loads connected by a light string, which in turn is put over a fixed rod, with the lighter load being held by a person, and the heavier close to the rod. When the lighter load is released, experience shows there is an instant when the heavier load stops falling, and the lighter winds around the rod, bringing the system to rest. This setup is used in science demonstrations to prevent a fragile object, such as a ceramic mug, from falling to the ground, using washers as the lighter load. In this paper we propose a mathematical model for this demonstration, which we use to analyze the main parameters that influence the effectiveness of the setup. We find its equations of motion analytically, and use numerical methods to relate relevant parameters (such as falling distance and trajectory) to the initial configuration, determine the conditions that allow the phenomenon to happen, and display results as plots and parameter spaces. Lastly, through careful experimentation we found strong evidence for the validity of our theoretical predictions. We found the looping pendulum to be an extremely useful problem for introductory college physics courses interested in strengthening analytical and computational physics skills, as its construction is easy, inexpensive, and its analysis encompasses various mechanics concepts, solving differential equations numerically, and data collection through video software. [ABSTRACT FROM AUTHOR]

Highly sensitive detection of biological analytes by plasmonic sensors is based on analyte adsorption, which modifies the effective refractive index (RI) at the medium-sensor interface. The main issue with such sensors is the non-ideal sensor selectivity (manifested in multiple analyte adsorption), while sample depletion (significant at low analyte concentrations) also causes a deviation of the sensor response from the expected time dependence. Mathematical modelling of sensor response, presented in this work, simultaneously tackles these two issues that may cause erroneous interpretation of measurement results. Two mathematical models that address the problem of limited selectivity are utilized to analyse the sensor response: the linear (pseudo-first order) model, commonly used for interpretation of measurements, and the nonlinear (second order) model that takes into account analyte depletion in the sensor chamber. While the nonlinear model has a virtue of generality, the advantages of the linear model are its simplicity and a well-established procedure for the analysis of experimental results. However, the linear model can exhibit large errors in the case of significant analyte depletion. Until now, the influence of analyte depletion on the linear model fidelity has not been studied for multianalyte adsorption. In this paper, we quantify the difference between the RI changes predicted by the two models of two-analyte competitive adsorption, and establish the conditions that justify the use of the linear model. The validity of these conditions is confirmed by numerically solving the exact nonlinear model equations. The conditions enable making an objective decision whether it is safe to use the linear model for detection of ultralow analyte concentrations, or the nonlinear model must be used in order to avoid false-positive/false-negative detection results and analyte quantification errors. The results are applicable in adsorption-based chemical/biological sensing in complex samples, as well as for the new generation single-element multianalyte plasmonic sensors. [ABSTRACT FROM AUTHOR]

This paper investigates the calibration and measurement uncertainty related to the use of different camera models in optical systems that include refractive surfaces. A refractive surface is an interface between media with different optical properties which introduces distortions in the imaging process due to the refraction of the lines-of-sight. This is an issue common to all the investigations of fluids flowing around or inside transparent solid geometries and is of relevance for a strong curvature of the solid/fluid interface. Appropriate modelling of the refractive effects is possible by integrating the pinhole camera model with a ray-tracing method, as demonstrated in a previous work (Paolillo and Astarita 2020 IEEE Trans. Pattern Anal. Mach. Intell.). On the other side, analytical camera models with a pure mathematical foundation, like those based on polynomials or rational functions, are classically used in the PIV/PTV community. Due to the non-linear nature of the involved distortions, the accuracy of these models in representing the imaging process in presence of refractive geometries depends strongly on the polynomial order and noise of the data used for the calibration. The current work provides a numerical estimate of the uncertainty inherent to the analytical camera models by using data generated via a reference refractive camera model. The present results show that high accuracy requires high orders, which implies a large number of calibration parameters and high demand for computational resources. In particular, the rational mapping functions exhibit superior performance compared to the polynomials, although their calibration is found to be sensitive to image noise and they might yield large extrapolation errors. An experimental verification is also reported, which shows that for the estimation of the velocity statistics a 7th order polynomial model offers results comparable to those of a refractive camera model. [ABSTRACT FROM AUTHOR]

Repeater optimization is the key for SOC (System on Chip) interconnect delay design. This paper proposes a novel optimal model for minimizing power and area overhead of repeaters while meeting the target performance of on-chip interconnect lines. It also presents Lagrangian function to find the number of repeaters and their sizes required for minimizing area and power overhead with target delay constraint. Based on the 65 nanometre CMOS technology, the computed results of the intermediate and global lines show that the proposed model can significantly reduce area and power of interconnected lines, and the better performance will be achieved with the longer line. The results compared with the reference paper demonstrate the validity of this model. It can be integrated into repeater design methodology and CAD (computer aided design) tool for interconnect planning in nanometre SOC. [ABSTRACT FROM AUTHOR]

Aiming to develop a more effective circularity evaluation method that satisfies the definition of a particular reference circle criterion, this paper proposes a strategy to determine the minimum circumscribed circle (MCC) and maximum inscribed circle (MIC) using the subzone division approach. The whole circumference zone space that encloses all the sampling data points is divided into different subzones to determine the target candidate feature points, which are used for constructing the MCC or MIC. The first feature point of the MCC/MIC is evaluated according to the farthest/nearest distance from the center of the least squares circle (LSC) within the whole circumference subzone. Subzone with a 120° central angle is designated in the direction of the first feature point that is mapped about the center of the LSC. The second candidate feature point is constrained and determined within this subzone. The third subzone, which contains the third feature point, is formed in the direction of the first and second feature points that are mapped about the center of the LSC. The mathematical model of the MCC or MIC is then constructed using these three feature points. Experimental examples (using five different datasets) and a comparison with previous studies demonstrate that the proposed method yields the exact solution for the MIC and MCC in only 1–2 iterations. [ABSTRACT FROM AUTHOR]

We consider the Sasa–Satsuma (SS) and nonlinear Schrödinger (NLS) equations posed along the line, in 1 + 1 dimensions. Both equations are canonical integrable U(1) models, with solitons, multi-solitons and breather solutions Yang (2010 SIAM Mathematical Modeling and Computation). For these two equations, we recognize four distinct localized breather modes: the Sasa–Satsuma for SS, and for NLS the Satsuma–Yajima, Kuznetsov–Ma and Peregrine breathers. Very little is known about the stability of these solutions, mainly because of their complex structure, which does not fit into the classical soliton behavior Grillakis et al (1987 J. Funct. Anal. 74 160–97). In this paper we find the natural H2 variational characterization for each of them. This seems to be the first known variational characterization for these solutions; in particular, the first one obtained for the famous Peregrine breather. We also prove that Sasa–Satsuma breathers are H2 nonlinearly stable, improving the linear stability property previously proved by Pelinovsky and Yang (2005 Chaos 15 037115). Moreover, in the SS case, we provide an alternative understanding of the SS solution as a breather, and not only as an embedded soliton. The method of proof is based in the use of a H2 based Lyapunov functional, in the spirit of Alejo and Muńoz (2013 Commun. Math. Phys. 324 233–62), extended this time to the vector-valued case. We also provide another rigorous justification of the instability of the remaining three nonlinear modes (Satsuma–Yajima, Peregrine and Kuznetsov–Ma), based in the study of their corresponding linear variational structure (as critical points of a suitable Lyapunov functional), and complementing the instability results recently proved e.g. in Muńoz (2017 Proyecciones (Antofagasta) 36 653–83). [ABSTRACT FROM AUTHOR]

In this paper we introduce a mathematical model of the image saturation phenomenon occurring in a charged coupled device (CCD), and we propose a novel computational method for restoring saturated images acquired by the atmospheric imaging assembly (AIA) telescope. The mathematical model takes into account both primary saturation, when the photon-induced charge reaches the CCD full well capacity, and the blooming effect, when the excess charge flows into adjacent pixels. The restoration of AIA saturated images is then formulated as an inverse problem with a forward operator encoding the standard diffraction of light rays by a convolution, the primary saturation by an upper limit to the number of photons and the blooming effect by the conservation of the photon-induced charge spilled over adjacent pixels. As a result of this theoretical formulation we propose an adaptive ℓ1 regularized inversion method improving the desaturation capabilities of the existing SE-DESAT method [Guastavino S et al 2019 Astrophys. J. 882 109]. We prove that this method has the consistency estimation property also in the case that a fixed unknown background is considered. We test the adaptive method both in the case of synthetic and real data, comparing the performance with the one of the SE-DESAT method, showing that the proposed method avoids edge effects and artifacts in reconstructions even when the background solar activity is particularly intense. [ABSTRACT FROM AUTHOR]

If rock beats scissors and scissors beat paper, one might assume that rock beats paper too. But this is not the case for intransitive relationships that make up the famous rock-paper-scissors game. However, the sole presence of paper might prevent rock from beating scissors, simply because paper beats rock. This is the blueprint for the rock-paper-scissors game with protection spillovers, which has recently been introduced as a new paradigm for biodiversity in well-mixed microbial populations. Here we study the game in structured populations, demonstrating that protection spillovers give rise to spatial patterns that are impossible to observe in the classical rock-paper-scissors game. We show that the spatiotemporal dynamics of the system is determined by the density of stable vortices, which may ultimately transform to frozen states, to propagating waves, or to target waves with reversed propagation direction, depending further on the degree and type of randomness in the interactions among the species. If vortices are rare, the fixation to waves and complex oscillatory solutions is likelier. Moreover, annealed randomness in interactions favors the emergence of target waves, while quenched randomness favors collective synchronization. Our results demonstrate that protection spillovers may fundamentally change the dynamics of cyclic dominance in structured populations, and they outline the possibility of programming pattern formation in microbial populations. [ABSTRACT FROM AUTHOR]

The location and frequency of events that heat the million-degree corona are still a matter of debate. One potential heating scenario is that the energy release is effectively steady and highly localized at the footpoints of coronal structures. Such an energy deposition drives thermal non-equilibrium solutions in the hydrodynamic equations in longer loops. This heating scenario was considered and discarded by Klimchuk et al. on the basis of their onedimensional simulations as incapable of reproducing observational characteristics of loops. In this paper, we use three-dimensional simulations to generate synthetic emission images, from which we select and analyze six loops. The main differences between our model and that of Klimchuk et al. concern (1) dimensionality, (2) resolution, (3) geometrical properties of the loops, (4) heating function, and (5) radiative function. We find evidence, in this small set of simulated loops, that the evolution of the light curves, the variation of temperature along the loops, the density profile, and the absence of small-scale structures are compatible with the characteristics of observed loops. We conclude that quasi-steady footpoint heating that drives thermal non-equilibrium solutions cannot yet be ruled out as a viable heating scenario for EUV loops. [ABSTRACT FROM AUTHOR]

This paper presents a 90 min tutorial intervention which permits the use of the Tutorials in Introductory Physics curriculum in a conventional physics course. In addition, the paper describes the impact of the intervention on students' understanding of the ray model of light in the context of geometrical images. In 2011 and 2012 a total of 79 introductory students participated in the intervention, where they worked with the Light and Shadow tutorial after having received lecture-based instruction in a conventional physics course. The impact of the intervention on the students' learning was assessed by means of paper-and-pencil test questions at the beginning and end of the intervention. The results showed that the proportion of correct or nearly correct answers increased by 17 percentage points during the intervention. Thus, it can be claimed that the intervention was a useful supplement to a conventional physics course by helping students to improve their understanding of the ray model of light. In addition, the intervention may serve as an intermediate step towards adopting the tutorials, since it permits the curriculum of a conventional physics course to be tested without large changes being made to the course. This type of information is needed in support of institutional changes towards more research-based instructional practices. [ABSTRACT FROM AUTHOR]

A mathematical model of an ultrahigh sensitivity piezoresistive chip of a pressure sensor with a range from −0.5 to 0.5 kPa has been developed. The optimum geometrical dimensions of a specific silicon membrane with a combination of rigid islands to ensure a trade-off relationship between sensitivity (Ssamples = 34.5 mV kPa−1 V−1) and nonlinearity (2KNL samples = 0.81%FS) have been determined. The paper also studies the range of the membrane deflection and makes recommendations on position of stops limiting diaphragm deflection in both directions; the stops allow for increasing burst pressure Pburst up to 450 kPa. The simulated data has been related to that of experimental samples and their comparative analysis showed the relevance of the mathematical model (estimated sensitivity and nonlinearity errors calculated on the basis of average values are 1.5% and 19%, respectively). [ABSTRACT FROM AUTHOR]

The development of a global navigation satellite system (GNSS) brings the benefit of positioning, navigation and timing (PNT) services with three or even more available frequency signals. This paper developed five-system multi-frequency precise point positioning (PPP) models based on mathematical and stochastic models. Static positioning performances were evaluated and analyzed with multi-GNSS experiment (MGEX) network datasets and a vehicle-borne kinematic experiment was conducted to verify the kinematic PPP performances. In addition, the receiver clock, zenith tropospheric delay (ZTD), inter-frequency bias (IFB) and differential code bias (DCB) estimates were discussed. Results show that the triple-frequency PPP performances perform slightly better than the dual-frequency solutions, apart from the GPS-related PPP models based on a single ionosphere-free (IF) combined measurement. By introducing the external ionospheric products, the mean convergence time is reduced. For instance, the mean convergence time of ionosphere-constrained (IC) multi-frequency PPP is reduced by 7.4% from 35.7 to 33.1 min and by 19.0% from 7.8 to 6.3 min, for Galileo-only and five-constellation solutions, respectively, compared with dual-frequency IF PPP models. Similarly, the kinematic PPP can also achieve improved performances with more frequency signals and multi-GNSS observations. [ABSTRACT FROM AUTHOR]

I approach the problem of time and other foundations of quantum (QM) cosmology using a combined histories, timeless and semiclassical approach. This approach is along the lines pursued by Halliwell. It involves the timeless probabilities for dynamical trajectories entering regions of configuration space, which are computed within the semiclassical regime. Moreover, the objects that Halliwell uses in this approach commute with the Hamiltonian constraint, H. This approach has not hitherto been considered for models that also possess nontrivial linear constraints, Lin. This paper carries this out for some concrete relational particle mechanics (RPMs). If there is also commutation with Lin--the Kuchař observables condition--the constructed objects are Dirac observables. Moreover, this paper shows that the problem of Kuchař observables is explicitly resolved for 1D and 2D RPMs. Then as a first route to Halliwell's approach for nontrivial linear constraints that is also a construction of Dirac observables, I consider theories for which Kucha?r observables are formally known, giving the relational triangle as an example. As a second route, I apply an indirect method that generalizes both group averaging and Barbour's best matching. For conceptual clarity, my study involves the simpler case of Halliwell 2003 sharp-edged window function. I leave the elsewiseimproved softened case of Halliwell 2009 for a subsequent paper II. Finally, I provide comments on Halliwell's approach and how well it fares as regards the various facets of the problem of time and as an implementation of QM propositions. [ABSTRACT FROM AUTHOR]

In this paper we continue our earlier studies (Diao et al 2011 J. Phys. A: Math. Theor. 44 405202, Diao et al J. Phys. A: Math. Theor. 45 275203) on the generation methods of random equilateral polygons confined in a sphere. The first half of this paper is concerned with the generation of confined equilateral random walks.We show that if the selection of a vertex is uniform subject to the position of its previous vertex and the confining condition, then the distributions of the vertices are not uniform, although there exists a distribution such that if the initial vertex is selected following this distribution, then all vertices of the random walk follow this same distribution. Thus in order to generate a confined equilateral random walk, the selection of a vertex cannot be uniform subject to the position of its previous vertex and the confining condition. We provide a simple algorithm capable of generating confined equilateral random walks whose vertex distribution is almost uniform in the confinement sphere. In the second half of this paper we show that any process generating confined equilateral random walks can be turned into a process generating confined equilateral random polygons with the property that the vertex distribution of the polygons approaches the vertex distribution of the walks as the polygons get longer and longer. In our earlier studies, the starting point of the confined polygon is fixed at the center of the sphere. The new approach here allows us to move the starting point of the confined polygon off the center of the sphere. [ABSTRACT FROM AUTHOR]

In a recent paper (Bhullar and Watchman 2012 Phys. Med. Biol. 57 273-86), the authors comment on data concerning the effective depth of cylindrical ionization chambers in water for clinical proton beams calculated in a previous paper (Palmans 2006 Phys. Med. Biol. 51 3483-501) and propose different results. They present a closed-format expression for an integral in the analytical model and claim that the series expansion I used in the older paper does not converge to the correct solution. They also claim that this is the reason for the resulting values of the shift of the effective depth with respect to the chamber centre to be different in both papers. Both claims are, however, incorrect as I show in this comment. The values they present are most likely based on a mistake in the scaling coefficients to account for the nonwater equivalence of wall, sleeve and central electrode materials. The better agreement which they observe between their values and the recommendation of IAEA TRS-398 is thus a coincidence. My conclusion is that the best available data for the effective depth of cylindrical ionization chambers inwater in clinical proton beams are at present the values I published before (Palmans 2006 Phys. Med. Biol. 51 3483-501) and which are supported by Monte Carlo simulations and experimental evidence. [ABSTRACT FROM AUTHOR]

In this paper, an analogue model of a memristor using a light-dependent resistor (LDR) is presented. This model can be simplified into two parts: a control circuit and a variable resistor. It can be used to easily verify theoretical presumptions about the switching properties of memristors. This LDR-based memristor model can also be used in both simulations and experiments for future research into memristor applications. The paper includes mathematical models, simulations, and experimental results. [ABSTRACT FROM AUTHOR]

Recent advances in dynamic elastography and biorheology have revealed that the complex shear modulus, G*, of various biological soft tissues obeys a frequency-dependent powerlaw. This viscoelastic powerlaw behavior implies that mechanical properties are communicated in tissue across the continuum of scales from microscopic to macroscopic. For deriving constitutive constants from the dispersion of G* in a biological tissue, a hierarchical fractal model is introduced that accounts for multiscale networks. Effective-media powerlaw constants are derived by a constitutive law based on cross-linked viscoelastic clusters embedded in a rigid environment. The spatial variation of G* is considered at each level of hierarchy by an iterative coarse-graining procedure. The establishment of cross-links in this model network is associated with an increasing fractal dimension and an increasing viscoelastic powerlawexponent. This fundamental relationship between shear modulus dynamics and fractal dimension of the mechanical network in tissue is experimentally reproduced in phantoms by applying shear oscillatory rheometry to layers of tangled paper strips embedded in agarose gel. Both model and experiments demonstrate the sensitivity of G* to the density of the mechanical network in tissue, corroborating disease-related alterations of the viscoelastic powerlaw exponent in human parenchyma demonstrated by in vivo elastography. [ABSTRACT FROM AUTHOR]

Localized surface plasmons (LSPs) have a wide range of applications in enhancing the performance of optoelectronic devices. For those applications, LSPs are often located on the surfaces or interfaces between dielectric mediums. Hence, it is necessary to investigate interaction between LSPs and interface. In this paper, we investigate the far-field and near-field LSP behaviors of silver nanocube arrays on a dielectric substrate. Finite-difference time-domain simulation results demonstrate that, when light is incident normally from the vacuum, a much deeper dip between the two peaks corresponding to bonding and anti-bonding modes of the LSPs generated in the metal nanocubes on dielectric mediums, comparing to the case that incident light is from the substrate. The charge distribution diagram shows that these behaviors can be described as a dipole-like mode and a quadrupole-like mode. A model based on the Fano interferences using modified Fresnel equations is employed to explain the physical mechanism of these behaviors. It reveals that this phenomenon is caused by the phase difference between the superimposed dipolar modes generated on the upper and lower interfaces of nanocube. A simplified mathematical model has been built to illustrate that symmetric dips can arise from the Fano interference between two discrete states and one continuum state. [ABSTRACT FROM AUTHOR]

Propagation of light through a medium with a complex refractive index in which gain and loss are engineered to be PT symmetric has many remarkable features. In particular the usual unitarity relations are not satisfied, so that the reflection coefficients can be greater than 1, and in general are not the same for left or right incidence. Within the class of optical potentials of the form v(x) = v1 cos(2βx) + iv2 sin(2βx) the case v2 = v1 is of particular interest, as it lies on the boundary of PT-symmetry breaking. It has been shown in a recent paper by Lin et al that in this case one has the property of 'unidirectional invisibility', while for propagation in the other direction there is a greatly enhanced reflection coefficient proportional to L2, where L is the length of the medium in the direction of propagation. For this potential we show how analytic expressions can be obtained for the various transmission and reflection coefficients, which are expressed in a very succinct form in terms of modified Bessel functions.While our numerical results agree very well with those of Lin et al we find that the invisibility is not quite exact, in amplitude or phase. As a test of our formulas we show that they identically satisfy a modified version of unitarity appropriate for PT-symmetric potentials. We also examine how the enhanced transmission comes about for a wave packet, as opposed to a plane wave, finding that the enhancement now arises through an increase, of O(L), in the pulse length, rather than the amplitude. [ABSTRACT FROM AUTHOR]

In a classical paper, Cahn derived expressions for the kinetics of transformations nucleated on random planes and lines. He used those as a model for nucleation on the boundaries, edges and vertices of a polycrystal consisting of equiaxed grains. In this paper it is demonstrated that Cahn's expression for random planes may be used in situations beyond the scope envisaged in Cahn's original paper. For instance, we derived an expression for the kinetics of transformations nucleated on random parallel planes that is identical to that formerly obtained by Cahn considering random planes. Computer simulation of transformations nucleated on random parallel planes is carried out. It is shown that there is excellent agreement between simulated results and analytical solutions. Such an agreement is to be expected if both the simulation and the analytical solution are correct. [ABSTRACT FROM AUTHOR]

A close parallelism between the notions of nonlinear pseudobosons and those of an apparent non-Hermiticity of observables as shown in part I (2011 J. Phys. A: Math. Theor. 44 415305) is demonstrated to survive the transition to the quantum models using an unbounded metric in the so-called standard Hilbert space of states. [ABSTRACT FROM AUTHOR]

A brane picture in type IIA superstring for the Yang monopole is reconsidered. It makes use of D2 and D4-branes wrapped on cycles in the K3 surface. When the model was first presented, some problems concerning the charges of the monopoles arose. In this paper, they are shown to be cured by the model itself. Surprisingly, the incompatibility between the multi-charge configuration and the spherical symmetry of the Yang monopole is seen in the brane description as the emergence of the enhanc,on shell and the fuzzy geometry. This consistency is deep and surprising, and is the point that triggered this work. It nontrivially relates a purely geometrical problem in ordinary spacetime with the emergence of noncommutative geometries. Besides, this paper includes an extended model for SO(4)-monopoles and a T-dual model in type IIB superstring. [ABSTRACT FROM AUTHOR]

Dynamic angular velocity modeling and error compensation of VG095M in the whole temperature range, based on a radial basis function (RBF) neural network, is presented in this paper. With gyro output voltage and environmental temperature as the input and angular velocity as the output, an RBF neural network model is established. The model is trained and validated by the experiment data. The fitting error of the model is 4.3818 × 10-6 deg s-1, which shows that the model has high precision. The experiment data except the data used for modeling were processed with this model. The results show that the maximum, minimum and mean square error of the angular velocity were reduced to 4.6%, 4.3% and 4.7% respectively after compensation. [ABSTRACT FROM AUTHOR]

This paper studies the topological properties of knotted solitons in the (3 + 1)-dimensional Aratyn-Ferreira-Zimerman (AFZ) model. Topologically, these solitons are characterized by the Hopf invariant I, which is an integral class in the homotopy group p3(S3) = Z. By making use of the decomposition of U(1) gauge potential theory and Duan's topological current theory, it is shown that the invariant is just the total sum of all the self-linking and linking numbers of the knot family while only linking numbers are considered in other papers. Furthermore, it is pointed out that this invariant is preserved in the branch processes (splitting, merging and intersection) of these knot vortex lines. [ABSTRACT FROM AUTHOR]

This paper reports the experimental results on electromagnetically induced absorption (EIA) spectra observed in the system which does not satisfy completely the conditions given by Lezama et al [1999 Phys. Rev. A 59 4732]. EIA signals on the transitions in the Cs D2 line are able to be observed, where Fg - Fe = Fg -- 1 as open systems. Theoretical model of Lezama et al is good for the case Fg - Fe = Fg + 1, considering spontaneous transfer of atomic coherences or populations this model is not able to explain our experimental results obtained in the case Fg - Fe = Fg -- 1. This paper offers a theoretical model which is able to well explain the case Fg - Fe = Fg -- 1. It also uses this theoretical model to explain the split and shift of EIA peaks, which have been obtained in experiments. [ABSTRACT FROM AUTHOR]

We study a new class of Radon transforms defined on circular cones called the conical Radon transform. In it maps a function to its surface integrals over circular cones, and in it maps a function to its integrals along two rays with a common vertex. Such transforms appear in various mathematical models arising in medical imaging, nuclear industry and homeland security. This paper contains new results about inversion of conical Radon transform with fixed opening angle and vertical central axis in and . New simple explicit inversion formulae are presented in these cases. Numerical simulations were performed to demonstrate the efficiency of the suggested algorithm in 2D. [ABSTRACT FROM AUTHOR]

In this paper, we further analyze our cellular automaton (CA) traffic flow model. By changing some parameters, the characteristics of our model can be significantly varied, ranging from the features of phase transitions to the number of traffic phases. We also review the other CA models based on Kerner's three-phase traffic theory. By comparisons, we find that the core concepts for modeling the synchronized flow in these models are similar. Our model can be a good candidate for modeling the synchronized flow, since there is enough flexibility in our framework. [ABSTRACT FROM AUTHOR]

In this paper, a new model is constructed for the causation analysis of railway accident based on the complex network theory. In the model, the nodes are defined as various manifest or latent accident causal factors. By employing the complex network theory, especially its statistical indicators, the railway accident as well as its key causations can be analyzed from the overall perspective. As a case, the “7.23” China—Yongwen railway accident is illustrated based on this model. The results show that the inspection of signals and the checking of line conditions before trains run played an important role in this railway accident. In conclusion, the constructed model gives a theoretical clue for railway accident prediction and, hence, greatly reduces the occurrence of railway accidents. [ABSTRACT FROM AUTHOR]

Classical and semiclassical schemes are presented that are timeless at the primary level and recover time from Mach’s ‘time is to be abstracted from change’ principle at the emergent secondary level. The semiclassical scheme is a Machian variant of the semiclassical approach to the problem of time in quantum gravity. The classical scheme is Barbour’s, cast here explicitly as the classical precursor of the semiclassical approach. Thus the two schemes have been married up, as equally-Machian and necessarily distinct, since the latter’s timestandard is abstracted in part from quantum change. I provide perturbative schemes for these in which the timefunction is to be determined rather than assumed. This paper is useful modelling as regards the Halliwell–Hawking arena for the quantum origin of the inhomogeneous cosmological fluctuations. [ABSTRACT FROM AUTHOR]

The sharp point of a cone is known to accumulate charges, thus representing a singularity for the electric field. However, a real pointed object has a finite radius of curvature at the apex. Thus, we investigate in this paper how the ‘roundness’ affects the behaviour of fields and charges at the tip of a cone. Two cases are considered: a double cone being the asymptote of a two-sided hyperboloid of two sheets and a one-sided cone being the asymptote of a similar one-sided hyperboloid. Our analysis employs the prolate spheroidal system of coordinates and uses Legendre functions of the first kind of non-integer degree. The behaviour of the surface charge density is illustrated graphically in terms of the distance to the apex. Simple approximate formulas for the charge density valid near the apex are given. [ABSTRACT FROM AUTHOR]

The Casimir force—at first, a rather unexpected consequence of quantum electrodynamics—was discovered by Hendrik Casimir in Eindhoven in 1948. It predicts that two uncharged metal plates experience an attractive force because of the zero-point fluctuations of the electromagnetic field. The idea was tested experimentally in the 1950s and 1960s, but the results were not so accurate that one could make a definite conclusion regarding the existence of the effect. Evgeny Lifshitz expanded the theory in 1955 so as to deal with general dielectric media. Much experimental work was later done to test the theory’s predictions, especially with regards to the temperature dependence of the effect. The existence of the effect itself was verified beyond doubt by Sabisky and Anderson in 1973. Another quarter century had to pass before Lamoreaux and collaborators were able to confirm—or at least make plausible—the temperature dependence predicted by Lifshitz formula in combination with reasonable input data for the material’s dispersive properties. The situation is not yet clear-cut, however, there are recent experiments indicating results in disagreement with those of Lamoreaux. In this paper, a brief review is given of the status of this research field. [ABSTRACT FROM AUTHOR]

This paper describes a way to measure the radii of curvature of electrons following a curved path in a magnetic field and the radii of the concentric rings resulting from the interference of the electrons inside an evacuated diffraction tube. High-resolution imaging dramatically increases the precision of measurements of physical distances, if they are along circular arcs. Digital photographs were taken and the free software ImageJ that comes with a multitude of image-processing routines and is widely used in life sciences research was employed for measurement and analysis. [ABSTRACT FROM AUTHOR]

We consider the free-boundary problem for the plasma–vacuum interface in ideal compressible magnetohydrodynamics (MHD). In the plasma region the flow is governed by the usual compressible MHD equations, while in the vacuum region we consider the pre-Maxwell dynamics for the magnetic field. At the free interface, driven by the plasma velocity, the total pressure is continuous and the magnetic field on both sides is tangent to the boundary. The plasma–vacuum system is not isolated from the outside world, because of a given surface current on the fixed boundary that forces oscillations.Under a suitable stability condition satisfied at each point of the initial interface, stating that the magnetic fields on either side of the interface are not collinear, we show the existence and uniqueness of the solution to the nonlinear plasma–vacuum interface problem in suitable anisotropic Sobolev spaces. The proof is based on the results proved in the companion paper (Secchi and Trakhinin 2013 Interfaces Free Boundaries15 323–57), about the well-posedness of the homogeneous linearized problem and the proof of a basic a priori energy estimate. The proof of the resolution of the nonlinear problem given in the present paper follows from the analysis of the elliptic system for the vacuum magnetic field, a suitable tame estimate in Sobolev spaces for the full linearized equations, and a Nash–Moser iteration. [ABSTRACT FROM AUTHOR]

In this paper we discuss the connections between a Vlasov–Fokker–Planck equation and an underlying microscopic particle system, and we interpret those connections in the context of the GENERIC framework (Öttinger 2005 Beyond Equilibrium Thermodynamics (New York: Wiley-Interscience)). This interpretation provides (a) a variational formulation for GENERIC systems, (b) insight into the origin of this variational formulation, and (c) an explanation of the origins of the conditions that GENERIC places on its constitutive elements, notably the so-called degeneracy or non-interaction conditions. This work shows how the general connection between large-deviation principles on one hand and gradient-flow structures on the other hand extends to non-reversible particle systems. [ABSTRACT FROM AUTHOR]

Random network generators such as Erd˝os–R´enyi, Watts–Strogatz and Barab´asi–Albert models are used as models to study real-world networks. Let G1(V, E1) and G2(V, E2) be two such networks on the same vertex set V. This paper studies the degree distribution and clustering coefficient of the resultant networks, G(V, E1 ∪ E2). [ABSTRACT FROM AUTHOR]

Nonlinearity exerts a profound influence on the displacement performance of actuators within electro-hydraulic servo systems, particularly in the context of hysteresis. This article analyses a specific hysteresis responsible for control instability, a consequence of the concave-hysteresis loop, giving rise to a notable peak phenomenon in displacement. The behavior of the concave-hysteresis loop is studied in the step load experiment of a triaxial apparatus. Subsequently, an accurately formulated mathematical model utilizing a mathematical function is derived. Notably, the article introduces an efficacious model-based compensation algorithm that integrates nonlinear iteration and fuzzy control. This strategic approach effectively addresses the issue associated with calculating the inverse model when the sensor is located in a nonlinear, hook-shaped domain. Simulation and experimentation verified the concave-hysteresis loop model and the compensation algorithm. The experiment demonstrated the elimination of peak phenomena and a decrease in sensor error from 3.7 mm to below 0.5 mm. [ABSTRACT FROM AUTHOR]

The paper introduces the concept of spatial modulation of light intensity in the context of vision-based quality control, with the aim to improve image quality, measurable by indices such as image contrast and Tenengrad, so as to enhance the level of confidence of the diagnosis performed by image processing. The proposed technique is based on the projection of spatially modulated light intensity distribution by a digital light projector that allows an arbitrary light distribution to be projected on the target. The projected spatial distribution of light is determined by implementing an algorithm based on image inversion: the image acquired by the camera under uniform illumination is inverted and it is then used to modulate the light spatial distribution for projection. The process is repeated iteratively with the purpose to enhance image quality until convergence. The technique proves particularly valuable to avoid saturation from reflecting surfaces, which are often found in industrial practice. The procedure is tested and validated both by a numerical model and by an experimental validation, referring to a significant problem for the washing machine manufacturing industry. The use of image quality estimators confirms the effectiveness of the method. [ABSTRACT FROM AUTHOR]

This paper provides a novel method to synchronize uncertain fractional-order chaotic systems with external disturbance via fractional terminal sliding mode control. Based on Lyapunov stability theory, a new fractional-order switching manifold is proposed, and in order to ensure the occurrence of sliding motion in finite time, a corresponding sliding mode control law is designed. The proposed control scheme is applied to synchronize the fractional-order Lorenz chaotic system and fractional-order Chen chaotic system with uncertainty and external disturbance parameters. The simulation results show the applicability and efficiency of the proposed scheme. [ABSTRACT FROM AUTHOR]

Flexible fluidic actuators recently attracted the interest of the microsystem community, especially for soft robotic applications including minimally invasive surgery. These actuators, based on a well-known actuator design where a void is surrounded by an asymmetric elastic structure, can achieve large bending strokes when pressurized. Miniaturized versions of these actuators typically fail due to poor bonding of constituting components, and further, there is little theoretical understanding of these devices. This paper presents a new actuator design which does not require any bonding and provides new insights into the modeling of these actuators. The newly developed production process of the actuators is based on out-of-plane high aspect ratio micromolding, which enables high-throughput bonding-free fabrication. Furthermore, a mathematical model based on Euler-Bernoulli's beam equation with a deformable cross section is developed that shows good agreement with validation experiments on prototypes. These theoretical insights greatly facilitate the design and optimization of flexible bending actuators. [ABSTRACT FROM AUTHOR]

The calculation of the trajectories in the Sun-Earth-Mars system is performed using two different models, both in the framework of Newtonian mechanics. The first model is the well-known Copernican system, which assumes that the Sun is at rest and that all the planets orbit around it. The second is a less wellknown model, developed by Tycho Brahe (1546-1601), according to which the Earth stands still, the Sun orbits around the Earth, and the other planets orbit around the Sun. The term 'neo-Tychonian system' refers to the assumption that orbits of distant masses around the Earth are synchronized with the Sun's orbit. It is the aim of this paper to show the kinematical and dynamical equivalence of these systems, under the assumption of Mach's principle. [ABSTRACT FROM AUTHOR]

Nowadays, close-range photogrammetry and a laser scanner are the two most popular techniques in reconstruction of three-dimensional objects. This paper develops a methodology based on videogrammetry to reconstruct 3D objects more quickly than conventional photogrammetric techniques and more cheaply than a laser scanner. Videogrammetry allows the capture of thousands of points in a very short space of time (like a laser scanner) and the object's geometry and texture (frames are photographic images as stereo pairs). A system composed of a video camera and a turntable support with a double platform over it has been developed. This paper shows the design, construction and calibration of the system to model 3D objects contained on the support with pinpoint accuracy. [ABSTRACT FROM AUTHOR]

In this paper, a kind of discrete delay food-limited model obtained by the Euler method is investigated, where the discrete delay t is regarded as a parameter. By analyzing the associated characteristic equation, the linear stability of this model is studied. It is shown that Neimark-Sacker bifurcation occurs when t crosses certain critical values. The explicit formulae which determine the stability, direction, and other properties of bifurcating periodic solution are derived by means of the theory of center manifold and normal form. Finally, numerical simulations are performed to verify the analytical results. [ABSTRACT FROM AUTHOR]