80 results on '"Park, Youn-sik"'
Search Results
2. 23.1 A 7.5Gb/s/pin LPDDR5 SDRAM With WCK Clocking and Non-Target ODT for High Speed and With DVFS, Internal Data Copy, and Deep-Sleep Mode for Low Power
3. Dual-loop 2-step ZQ calibration for dedicated power supply voltage in LPDDR4 SDRAM
4. 23.2 A 5Gb/s/pin 8Gb LPDDR4X SDRAM with power-isolated LVSTL and split-die architecture with 2-die ZQ calibration scheme
5. Three-dimensional Sound Source Localization Using Inter-channel Time Difference Trajectory
6. Fusion Filter for Orientation Estimation of Biped Robot
7. A Study on Reducing Vibration of Washing Machine Using Gyroscope System
8. An improved procedure for updating finite element model based on an interactive multiobjective programming
9. Active Noise Control for Target Point Inside Bore Using Property of MRI Noise
10. 1C12 Tracking Control of Mobile Harbor Crane to Moving Container Ship(The 12th International Conference on Motion and Vibration Control)
11. Sweet Spot Analysis of Linear Array System with a Large Number of Loudspeakers by Geometrical Approach Method
12. Impact of Hilly Road Profile on Optimal Energy Management Strategy for FCHEV with Various Battery Sizes
13. Terminal tracking control of mobile harbor crane subject to actuator saturation
14. A Study on Stability of Limit Cycle Walking Model with Feet: Parameter Study
15. Robust $H_{\infty} $ Sliding Mode Descriptor Observer for Fault and Output Disturbance Estimation of Uncertain Systems
16. Design Observable Model of Direct Drive Motor for Air Gap Estimation when Input Disturbance is Impulse signal
17. A novel updating method of equivalent factor in ECMS for prolonging the lifetime of battery in fuel cell hybrid electric vehicle
18. Adaptive regenerative braking control in severe cornering for guaranteeing the vehicle stability of fuel cell hybrid electric vehicle
19. Vector Base Amplitude Panning Based Noise Control Method for Improving the Amenity in Building Environment
20. Attitude Estimation for the Biped Robot with Vision and Gyro Sensor Fusion
21. Sound direction estimation using an artificial ear for robots
22. Acoustic focusing headphone based on delay-and-sum beamforming
23. Cleansed PHAT GCC based sound source localization
24. Analysis of the GCC-PHAT technique for multiple sources
25. Calibration of measured head-related transfer function database
26. Spatially Mapped GCC Function Analysis for Multiple Source and Source Localization Method
27. Customization of Spatially Continuous Head-Related Impulse Responses in the Median Plane
28. Newly Designed HRTF Measurement System and its Analysis
29. 1C14 Development of an auto-positioning spreader for Mobile Harbor
30. 2C14 Varying Horizon LQ Control for Vehicle Attitude Control in Rear-end Collisions
31. The response and the lift force analysis of a cylinder oscillating in still water
32. The response and the lift force analysis of a cylinder oscillating in still water
33. Analysis on perceptual sensitivity to head-related impulse responses in the median plane
34. A probabilistic method for analysis of sound localization performance
35. Look-ahead preview control application to the high-mobility tracked vehicle model with trailing arms
36. New approximations of external acoustic–structural interactions: Derivation and evaluation
37. Modeling and Customization of Head-Related Impulse Responses Based on General Basis Functions in Time Domain
38. Modeling and customization of head-related transfer functions using principal component analysis
39. Sound source localization for robot auditory system using the summed GCC method
40. Optimization of spherical and spheroidal head model for Head Related Transfer Function customization: Magnitude comparison
41. An automated parameter selection procedure for finite-element model updating and its applications
42. Raising natural frequencies of a structure via surface-grooving technique
43. Robust Saturation Controller for the Stable LTI System with Structured Real Parameter Uncertainties
44. The tracking control of uni-axial servo-hydraulic shaking table system using time delay control
45. A study of insertion depth of buchanan plugger after shaping using NI-TI rotary files in simulated resin root canals
46. Identification of damage on a substructure with measured frequency response functions
47. Structural dynamics modification via reorientation of modification elements
48. A geometry constraint handling technique for stiffener layout optimization problem
49. An improved updating parameter selection method and finite element model update using multiobjective optimisation technique
50. DAMAGE DETECTION USING SPATIALLY INCOMPLETE FREQUENCY RESPONSE FUNCTIONS
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.