49 results on '"Mizera, Jarosław"'
Search Results
2. Microstructural, corrosion and mechanical properties of a WE43 alloy: conventional extrusion versus SPD
3. Impact of an Aluminization Process on the Microstructure and Texture of Samples of Haynes 282 Nickel Alloy Produced Using the Direct Metal Laser Sintering (DMLS) Technique
4. A comparison of the microstructure-dependent corrosion of dual-structured Mg-Li alloys fabricated by powder consolidation methods: Laser powder bed fusion vs pulse plasma sintering
5. Analysis of Residual Stresses and Dislocation Density of AA6082 Butt Welds Produced by Friction Sir Welding
6. The Impact of Plastic Deformation on the Microstructure and Tensile Strength of Haynes 282 Nickel Superalloy Produced by DMLS and Casting
7. Corrosion degradation of archaeological lead: A review and case study
8. Effect of annealing on the microstructure and properties of IN 625 specimens manufactured by selective laser melting
9. Increasing the Mechanical Strength and Corrosion Resistance of Aluminum Alloy 7075 via Hydrostatic Extrusion and Aging
10. Evolution of microstructure dependent corrosion properties of ultrafine AZ31 under conditions of extrusion with a forward backward oscillating die
11. The Effect of Extrusion Ratio on the Corrosion Resistance of Ultrafine-Grained Mg-4Li-3Al-Zn Alloy Deformed Using Extrusion with a Forward-Backward Oscillating Die
12. Corrosion behavior of fine-grained Mg-7.5Li-3Al-1Zn fabricated by extrusion with a forward-backward rotating die (KoBo)
13. The Impact of Retained Austenite on the Mechanical Properties of Bainitic and Dual Phase Steels
14. Corrosion Degradation of Archaeological Lead: A Review and Case Study
15. Investigations of Model Multilayer Ceramic Casting Molds in a Raw State by Nondestructive Methods
16. Microstructure and corrosion resistance characteristics of Ti–AlN composite produced by selective laser melting
17. Ni-based alloy 713C manufactured by a selective laser melting method: characteristics of the microstructure
18. Studies of Bainitic Steel for Rail Applications Based on Carbide-Free, Low-Alloy Steel
19. Analysis of direct metal laser sintering ‒ DMLS and heat treatment influence on the Inconel 713C nickel alloy structure
20. Influence of bimodal grain size distribution on the corrosion resistance of Mg–4Li–3Al–1Zn (LAZ431)
21. Influence of Hydrostatic Extrusion on the Mechanical Properties of the Model Al-Mg Alloys
22. Microstructure and corrosion resistance of a duplex structured Mg–7.5Li–3Al–1Zn
23. Corrosion Behavior of Cold-Formed AA5754 Alloy Sheets
24. The Influence of Microstructure on Corrosion Resistance of Mg-3Al-1Zn-15Li (LAZ1531) Alloy
25. Composite Layer with a Ti3P External Zone Produced on Titanium Alloy for Bone Applications
26. Texture Development in a Model Al-Li Alloy Subjected to Severe Plastic Deformation
27. Influence of Severe Plastic Deformation on the PLC Effect and Mechanical Properties in Al 5XXX Alloy
28. Microstructure and Mechanical Properties of Binary Al-Li Alloys Processed by ECAE
29. Effects of Heat Treatment Parameters on the Microstructure and Properties of Bainitic Steel
30. The impact of different volume fractions of crystalline structures on the electrochemical behaviour of Mg67Zn29Ca4alloys for biomedical applications
31. The influence of volume fraction of amorphous phase on corrosion resistance of Mg 67 Zn 29 Ca 4 alloy
32. Low-cycle fatigue behaviour and microstructural evolution of pearlitic and bainitic steels
33. Comparison of single and consecutive dual frequency induction surface hardening of gear wheels
34. The influence of sintering time on the microstructural properties of chromium-rhenium matrix composites
35. The influence of the complex deformation on the microstructure and mechanical properties of the model Al-Li alloys
36. Experimental ceramic proppants characterization in the process of shale gas extraction
37. Characterization and evaluation properties of ceramic proppants used in the extraction of the unconventional hydrocarbons
38. Rheological studies of ceramic slurries used for the preparation of the proppants
39. Influence of chemical composition of Ti/TiC/a-C:H coatings deposited on 7075 aluminum alloy on their selected mechanical properties
40. Corrosion resistance of model ultrafine-grained Al–Li alloys produced by severe plastic deformation
41. Microstructures in the 6060 aluminium alloy after various severe plastic deformation treatments
42. Ultra-Fine Grain Structures Of Model Al-Mg-Si Alloys Produced By Hydrostatic Extrusion
43. Microstructural stability and creep properties of die casting Mg–4Al–4RE magnesium alloy
44. Digital Image Correlation investigation of Portevin–Le Chatelier effect in an aluminium alloy
45. Quantitative description of the morphologic texture in an Al–Li alloy
46. Anisotropy of grain growth in polycrystals of α-Fe
47. Microtexture analysis of a hot deformed Al-2.3wt.%Li-0.1wt.%Zr alloy
48. Studies of the relationship between the microstructure and anisotropy of the plastic properties of industrial aluminum-lithium alloys
49. Description of the kinetics of normal and abnormal grain growth in austenitic stainless steel
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.