69 results on '"Messori M"'
Search Results
2. Use of different kinds of waste in the construction of new polymer composites: review
3. Contributors
4. Surface Modification of Polymers
5. Fabrication and characterization of new eco-friendly composites obtained by the complete recycling of exhausted coffee capsules
6. UV-Cured Functional Coatings
7. Wine derived additives as poly(butylene succinate) (PBS) natural stabilizers for different degradative environments
8. Influence of atmospheric pressure plasma process parameters on the mechanical behavior of thermoplastic joints
9. Thermo-mechanical properties and creep modelling of wine lees filled Polyamide 11 (PA11) and Polybutylene succinate (PBS) bio-composites
10. Production of Maleic and Phthalic Anhydrides by Selective Vapor Phase Oxidation with Vanadium Oxide Based Catalysts
11. Effect of the wine lees wastes as cost‐advantage and natural fillers on the thermal and mechanical properties of poly(3‐hydroxybutyrate‐co‐hydroxyhexanoate) (PHBH) and poly(3‐hydroxybutyrate‐co‐hydroxyvalerate) (PHBV)
12. Thermal and UV aging of polypropylene stabilized by wine seeds wastes and their extracts
13. Verwey transition temperature distribution in magnetic nanocomposites containing polydisperse magnetite nanoparticles
14. Structure and Properties of Polyamide 11 Nanocomposites Filled with Fibrous Palygorskite Clay
15. Effect of expandable and expanded graphites on the thermo-mechanical properties of polyamide 11
16. Glucose-insulin model identified in free-living conditions for hypoglycaemia prevention
17. A comparative study of different winemaking by-products derived additives on oxidation stability, mechanical and thermal proprieties of polypropylene
18. Magnetite-epoxy nanocomposites obtained by the reactive suspension method: Microstructural, thermo-mechanical and magnetic properties
19. MPC Model Individualization in Free-Living Conditions: A Proof-of-Concept Case Study
20. Parental evaluation of a telemonitoring service for children with Type 1 Diabetes
21. Shape memory nanocomposite of poly(L-lactic acid)/graphene nanoplatelets triggered by infrared light and thermal heating
22. A scratch resistant yet healable automotive clearcoat containing hyperbranched polymer and POSS nanostructures
23. Toughened acrylic/melamine thermosetting clear coats using POSS molecules: Mechanical and morphological studies
24. A nonparametric approach for model individualization in an artificial pancreas∗∗This work was supported by ICT FP7-247138 Bringing the Artificial Pancreas at Home. (AP@home) project and the Fondo per gli Investimenti della Ricerca di Base project Artificial Pancreas:In Silico Development and In Vivo Validation of Algorithms forBlood Glucose Control funded by Italian Ministero dell'Istruzione,dell'Universit_a e della Ricerca.
25. Artificial Pancreas: from in-silico to in-vivo∗∗This work was supported by the Fondo per gli Investimenti della Ricerca di Base project Artificial Pancreas: In Silico Development and In Vivo Validation of Algorithms for Blood Glucose Control funded by Italian Ministero dell'Istruzione, dell'Universitä e della Ricerca.
26. Tribological properties and scratch healing of a typical automotive nano clearcoat modified by a polyhedral oligomeric silsesquioxane compound
27. Influence of in situ -generated silica nanoparticles on EPDM morphology, thermal, thermomechanical, and mechanical properties
28. Reinforcement of EPDM rubber with in situ generated silica particles in the presence of a coupling agent via a sol–gel route
29. Preparation and characterization of EPDM/silica composites prepared through non-hydrolytic sol-gel method in the absence and presence of a coupling agent
30. One-way and two-way shape memory behaviour of semi-crystalline networks based on sol–gel cross-linked poly(ε-caprolactone)
31. Novel toughened automotive clearcoats modified by a polyester‐amide hyperbranched polymer: structural and mechanical aspects
32. Poly(methyl methacrylate)–TiO2 nanocomposites obtained by non-hydrolytic sol–gel synthesis: the innovative tert-butyl alcohol route
33. Two-way reversible shape memory behaviour of crosslinked poly(ε-caprolactone)
34. Interrelation between preparation conditions, structure, and mechanical reinforcement in isoprene rubber filled with in situ generated silica
35. Enhancement of scratch-resistance properties of methacrylated UV-cured coatings
36. Perfluoropolyether-based organic–inorganic coatings
37. Poly(methyl methacrylate)-TiO2 nanocomposite obtained by non-hydrolytic sol–gel synthesis
38. The Problem of NIDS Evasion in Mobile Networks
39. Polycarbonate reinforced with silica nanoparticles
40. UV-cured epoxy coatings modified with perfluoropolyether-based materials
41. Improving Epoxy Adhesives with Zirconia Nanoparticles
42. Scratch resistant tough nanocomposite epoxy coatings based on hyperbranched polyesters
43. Improving the creep stability of high-density polyethylene with acicular titania nanoparticles
44. Bentonite-Based Organoclays as Innovative Flame Retardants Agents for SBS Copolymer
45. Monitoring of the Sol‐Gel Synthesis of Organic‐inorganic Hybrids by FTIR Transmission, FTIR/ATR, NIR and Raman Spectroscopy
46. Design of surface properties of PET films: Effect of fluorinated block copolymers
47. Thiodiethylene glycol based polyesters: synthesis and thermal characterization
48. Cohesive and adhesive properties of polycaprolactone/silica hybrid coatings on poly(methyl methacrylate) substrates
49. Electrical behavior of PET films coated with nanostructured organic–inorganic hybrids
50. Perfluoropolyether-based organic-inorganic hybrid coatings: Preparation and surface characterisation
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.