226 results on '"Ahn, Kyung Hyun"'
Search Results
2. The Effect of Molecular Weight of Carboxymethyl Cellulose on the Dispersion of Silicon Suspensions Investigated by the Ultrasonic Degradation Method
3. Highly Efficient Nitrogen‐Fixing Microbial Hydrogel Device for Sustainable Solar Hydrogen Production (Adv. Mater. 52/2023)
4. Toward a zero-waste microalgal biorefinery: Complete utilization of defatted Chlorella biomass as a sole heterotrophic substrate for Chlorella sp. HS2 and an improved composite filler
5. Rheological analysis of peroxide radical-induced modification of microalgae-based polymer composite
6. Highly Efficient Nitrogen‐Fixing Microbial Hydrogel Device for Sustainable Solar Hydrogen Production
7. Data-driven methods in Rheology
8. CO2-derived Microalgae as a Biomass Filler to Fabricate Green Composite
9. Evaporation-driven solutal-Marangoni instability in a saline solution: Theoretical and numerical studies
10. Data-driven constitutive model of complex fluids using recurrent neural networks
11. Effects of sodium carboxymethyl cellulose and poly (acrylic acid) on the agglomeration behavior of aqueous silicon suspensions
12. Mechanical degradation of poly(ethylene terephthalate) and its structural modification by chain extender
13. Tuning the microstructure and rheological properties of MXene-polymer composite ink by interaction control
14. Role of carboxymethyl cellulose binder and its effect on the preparation process of anode slurries for Li-ion batteries
15. Floatable photocatalytic hydrogel nanocomposites for large-scale solar hydrogen production
16. Dispersion of unfractionated microalgae in various polymers and its influence on rheological and mechanical properties
17. Visualization of styrene-butadiene rubber (SBR) latex and large-scale analysis of the microstructure of lithium-ion battery (LIB) anodes
18. A Novel High-Speed Li-Ion Battery Manufacturing Process Applying the Dewatering Concept
19. Toward a Zero-Waste Microalgal Biorefinery: Complete Utilization of Defatted Chlorella Biomass as a Sole Heterotrophic Substrate for Chlorella Sp. Hs2 and an Improved Composite Filler
20. Yielding behavior of concentrated lithium-ion battery anode slurry
21. Rheological and mechanical behavior of non‐spherical poly(lactic acid) particles embedded poly(butylene adipate‐co‐terephthalate) blend
22. Dispersion of unfractionated CO2-derived protein-rich microalgae (Chlorella sp. HS2) for ecofriendly polymer composite fabrication
23. Sedimentation and Rheological Study of Microalgal Cell (Chlorella sp. HS2) Suspension
24. Variation of the Electrical Conductivity of PLA‐Based Composites with a Hybrid of Graphene and Carbon Black During 3D Printing
25. Effect of Colloidal Interactions and Hydrodynamic Stress on Particle Deposition in a Single Micropore
26. Mechanically enhanced poly(lactic acid)/polyurethane blend with interfacial‐localized clay particles
27. A coarse-grained particle simulation on the capillary suspension and its rheological properties under the simple shear flow
28. Secondary polymer-induced particle aggregation and its rheological, electrical, and mechanical effects on PLA-based ternary composites
29. Interconnected network of Ag and Cu in bioplastics for ultrahigh electromagnetic interference shielding efficiency with high thermal conductivity
30. Significant Agglomeration of Conductive Materials and the Dispersion State Change of the Ni-Rich NMC-Based Cathode Slurry during Storage
31. Stratification Mechanism in the Bidisperse Colloidal Film Drying Process: Evolution and Decomposition of Normal Stress Correlated with Microstructure
32. Interplay between particulate fouling and its flow disturbance: Numerical and experimental studies
33. Drying mechanism of monodisperse colloidal film: Evolution of normal stress and its correlation with microstructure
34. Brownian dynamics simulation on orthogonal superposition rheology: Time–shear rate superposition of colloidal gel
35. Effect of Operating Conditions on the Sessile Drop Oscillation of PEO Solutions in the Capillary Thinning Process
36. Controlling Drying Stress and Mechanical Properties of Battery Electrodes Using a Capillary Force-Induced Suspension System
37. Effect of Melt-Compounding Protocol on Self-Aggregation and Percolation in a Ternary Composite
38. Synergistic toughening effect of hybrid clay particles on poly(lactic acid)/natural rubber blend
39. Flow and mixing characteristics of a groove-embedded partitioned pipe mixer
40. Role of PVDF in Rheology and Microstructure of NCM Cathode Slurries for Lithium-Ion Battery
41. Injectable hydrogels with improved mechanical property based on electrostatic associations
42. Application of a Flow-Type Electrochemical Lithium Recovery System with λ-MnO2/LiMn2O4: Experiment and Simulation
43. Reduced graphene-oxide filter system for removing filterable and condensable particulate matter from source
44. Particle dynamics at fluid interfaces studied by the color gradient lattice Boltzmann method coupled with the smoothed profile method
45. Viscosity Measurement of Whole Blood with Parallel Plate Rheometers
46. Toughening Effect of Clay Particles on Poly(Lactic Acid)/Natural Rubber Blend
47. Change of rheological/mechanical properties of poly(caprolactone)/CaCO3 composite with particle surface modification
48. The first normal stress difference of non-Brownian hard-sphere suspensions in the oscillatory shear flow near the liquid and crystal coexistence region
49. Design Optimization for a Microfluidic Crossflow Filtration System Incorporating a Micromixer
50. The 30th Anniversary Symposium of the Korean Society Rheology (KSR30)
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.