Search

Purpose: The purpose of this study was to examine the reaction and hard tissue derivation of rat pulp directly capped with experimentally developed adhesive resin systems after CO2 laser irradiation. Materials and Methods: The experimentally developed bonding agents used for direct pulp capping contained four kinds of calcium phosphate: hydroxyapatite, dicalcium phosphate dehydrate, β-tricalcium phosphate, and octacalcium phosphate, as well as Mega Bond (MB) primer (MBP) used for adhesive treatment. The intensities of irradiation of the CO2 laser were set at three stages: low, medium (standard) with LLLT action, and high. The 12 experimental groups were formed by combining the three laser groups with four kinds of experimentally developed bonding agents. MBP was applied to the control group after direct pulp capping with Dycal without laser irradiation. In all groups, the cavities were filled with Clearfil AP-X and photopolymerized. Histopathological and immunohistochemical examinations were undertaken 3, 7, and 14 days after direct pulp capping. Results: There was no significant difference in the wound healing of exposed pulp among the laser-irradiated experimental groups. However, the group irradiated with the low-intensity laser showed faster pulp healing and dentin bridge formation than the other laser groups. Conclusion: There was no significant difference in wound healing of exposed pulp between each experimental group and the control group. It was suggested that low irradiation condition of CO2 laser and direct pulp capping with experimentally developed bonding agents containing calcium phosphate were comparable to the preparation of calcium hydroxide DY. The thickness of irritative dentin formed on the pulpal wall showed a tendency to increase as the intensity of irradiation was raised. [ABSTRACT FROM AUTHOR]

Introduction The purpose of this study was to compare Biodentine and mineral trioxide aggregate (MTA) for direct pulp capping in young permanent molars by clinical and radiographic evaluation in 7- to 9-year-old children. Methods In 50 patients, 29 patients with bilateral asymptomatic first permanent molars with carious involvement were selected. According to split mouth design, these patients were then divided into 2 groups, Biodentine group (right side) and MTA group (left side). The pulp-capping procedure was performed by using Biodentine and MTA in 58 asymptomatic bilateral permanent molars with pulp exposure. At each recall (baseline, 6 and 12 months), treatment outcome was assessed clinically through pulpal sensitivity tests as well as radiographically to evaluate dentin bridge formation. Results The study reported 100% success rate with both Biodentine and MTA at baseline and 6- and 12-month follow-up on the basis of clinical and radiographic parameters. These findings were statistically non-significant ( P < .05) between both groups (Biodentine and MTA). Radiographically, dentin bridge formation was not evident with both groups at baseline, but it was evident after 6- and 12-month follow-up. These findings were statistically non-significant ( P < .05) in both Biodentine and MTA groups. Conclusions This study reported 100% success rate with both MTA and Biodentine when used as direct pulp-capping agent in first permanent molars in 7- to 9-year-old children. The major limitations of the study were smaller sample size and short follow-up period. [ABSTRACT FROM AUTHOR]

This study evaluates the biological properties of a new pulp capping material developed from Portland cement. This study was conducted on 48 teeth in 4 dogs (12 teeth/dog). The dogs were classified into two equal groups (n = 24 teeth) according to the evaluation period including: group A (3 weeks) and group B (3 months). Each group was further subdivided into three equal subgroups (n = 8 teeth) according to the capping material including: subgroup 1: mineral trioxide aggregate (MTA), subgroup2: Portland cement + 10% calcium hydroxide + 20% bismuth oxide (Port Cal) and subgroup 3: Portland cement + bismuth oxide. After general anesthesia, a class V buccal cavity was prepared coronal to the gingival margin. After pulp exposure and hemostasis,the capping materials and glass ionomer filling were placed on the exposure sites. All histopathological findings, inflammatory cell count and dentin bridge formation were recorded. Data were analyzed statistically. After 3 months, the histopathological picture of the pulp in subgroup 1 showed normal pulp, continuous odontoblastic layer and complete dentin bridge formation while subgroup 2 showed partial and complete dentin bridge over a normal and necrotic pulps. Subgroup 3 showed loss of normal architecture, areas of necrosis, complete, or incomplete dentin bridge formation, attached and detached pulp stones and fatty degeneration in group B. For group A, MTA subgroup showed the least number of inflammatory cell infiltrate followed by Port Cal subgroup. While subgroup 3 showed the highest number of inflammatory cell infiltrate. For group B, the mean inflammatory cell count increased with the three tested materials with no statistical difference. Regarding dentin bridge formation at group A, no significant differences was found between subgroups, while at group B, MTA subgroup exhibited significantly higher scores than other subgroups. In conclusion, addition of calcium hydroxide to Portland cement improves the dentin bridge formation qualitatively and quantitatively. [ABSTRACT FROM AUTHOR]

The effect of dental pulp capping materials on hard-tissue barrier formation. Didilescu AC, Cristache CM, Andrei M, Voicu G, Perlea P. J Am Dent Assoc 2018; 149 (10):903 – 17. None. Systematic review and meta-analysis of data. [ABSTRACT FROM AUTHOR]

Introduction Direct pulp capping is an important therapeutic method that has goal to provide formation of dentin bridge and healing process of the pulp. The aim of this study was to investigate the effects of new nanostructural materials based on calcium silicate systems and hydroxyapatite on exposed dental pulp in Vietnamese pigs. Material and Methods The study was conducted on 30 teeth of two Vietnamese pigs ( Sus scrofa verus). On buccal surfaces of incisors, canines and first premolars, class V cavities were prepared with a small round bur and pulp horn was exposed. In the first experimental group (10 teeth) the perforation was covered with new nanostructural material based on calcium silicate systems (CS). In the second experimental group, the perforation was covered with compound of calcium silicate systems and hydroxyapatite (HA-CS) (10 teeth). In the control group, exposed pulp was covered with Pro Root MTA® (Dentsply Tulsa Dental, Johnson City, TN, USA) (10 teeth). All cavities were restored with glass ionomer cement (GC Fuji VIII, GC Corporation, Tokyo, Japan). Observation period was 28 days. After sacrificing the animals, histological preparations were done to analyze the presence of dentin bridge, inflammatory reaction of the pulp, pulp tissue reorganization and the presence of bacteria. Results Dentin bridge was observed in all teeth (experimental and control groups). Inflammation of the pulp was mild to moderate in all groups. Neoangiogenesis and many odontoblast like cells responsible for dentin bridge formation were detected. Necrosis was not observed in any case, neither the presence of Gram-positive bacteria in the pulp. Conclusion Histological analysis indicated favorable therapeutic effects of new nanostructural materials based on calcium silicate systems and hydroxyapatite for direct pulp capping in teeth of Vietnamese pigs. [ABSTRACT FROM AUTHOR]

Introduction: This clinical trial was conducted to evaluate the response of human dental pulp to direct capping with betamethasone/gentamicin (BG) cream and mineral trioxide aggregate (MTA). We hypothesized that the results of direct pulp capping with a topical BG combination would be similar to or better than those with MTA. Methods: Thirty-six human first premolar teeth scheduled for orthodontic extraction were randomly divided into 4 groups: BG1 group (n = 9), BG cream with 2-week follow-up; BG2 group (n = 10), BG cream with 8-week follow-up; MTA1 group (n = 8), MTA with 2-week follow-up; and MTA2 group (n = 9), MTA with 8-week follow-up. Teeth were extracted and evaluated at respective time intervals. Micro-computed tomography scanning and histologic analyses were performed for all specimens. Pulp pathology (inflammation, pulp abscesses, and pulp necrosis) and reparative reaction (formation of dentin bridges) were recorded. Results: Both BG cream and MTA resulted in significantly better pulpal responses at 8 weeks than at 2 weeks. Dentin bridge formation was significantly thicker in the MTA group at 8 weeks than in any other group (P < .05). Inflammation was of the acute type in all groups; no statistically significant differences in the distribution of inflammatory cells were found among the groups. Pulpal abscesses and/or necrosis were observed more often in teeth capped with BG than with MTA. Conclusions: Direct pulp capping with both BG cream and MTA was associated with dentin bridge formation. MTA resulted in a significantly better pulpal response, with less inflammation and a thicker dentin bridge at 8 weeks. [ABSTRACT FROM AUTHOR]

Introduction Mineral trioxide aggregate (MTA) is a biocompatible material for direct pulp capping. This study was designed to compare the clinical outcomes of pulp-exposed teeth treated with either poly(ε-caprolactone) fiber mesh (PCL-FM) as a barrier for MTA (so-called PCL-FM/MTA) or MTA direct pulp capping. Methods Sixty human vital teeth were evenly divided into 4 groups ( n = 15 in each group). Teeth in groups 1 and 3 had pulp exposure <1 mm in diameter, whereas teeth in groups 2 and 4 had pulp exposure of 1–1.5 mm in diameter. Teeth in groups 1 and 2 were treated with PCL-FM/MTA direct pulp capping, and those in groups 3 and 4 were treated with MTA direct pulp capping. Results Teeth treated with PCL-FM/MTA direct pulp capping needed a significantly shorter mean duration for dentin bridge formation than teeth treated with MTA direct pulp capping. Moreover, teeth with pulp exposure <1.0 mm in diameter needed a significantly shorter mean duration for dentin bridge formation than teeth with pulp exposure of 1–1.5 mm in diameter after either PCL-FM/MTA or MTA direct pulp capping treatment. In addition, teeth treated with PCL-FM/MTA direct pulp capping formed an approximately 3-fold thicker dentin bridge than teeth treated with MTA direct pulp capping 8 weeks or 3 months later. Furthermore, none of the teeth treated with PCL-FM/MTA direct pulp capping showed tooth discoloration after treatment for 3 months. Conclusions PCL-FM/MTA is a better combination material than MTA alone for direct pulp capping of human permanent teeth. [ABSTRACT FROM AUTHOR]

Copyright of Serbian Dental Journal / Stomatološki Glasnik Srbije is the property of National Library of Serbia and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Abstract: This study was conducted to evaluate the pulpal response to direct capping with either mineral trioxide aggregate (MTA) or calcium hydroxide (CH) cement in humans, with a focus on dentin bridge formation and dentin sialoprotein (DSP) and heme oxygenase-1 (HO-1) expression. Direct pulp capping was performed in 20 cases of caries-free human third molars. The pulps were exposed and capped with either MTA or hard-setting CH. After 2 months, the teeth were extracted, and the specimens were prepared for histologic and immunohistochemical evaluations. Histologically, 100% of the MTA group and 60% of the CH group developed dentin bridges. The mean thickness of the dentin bridges observed in the MTA group was statistically greater than that of CH group. In addition, DSP and HO-1 were expressed in the odontoblast-like cells and pulp fibroblasts beneath the dentin bridge; furthermore, significantly greater immunostaining was observed in the MTA group than in the CH group. Collectively, these results indicate that MTA is superior to CH in terms of inducing the dentinogenic process in human pulp capping. [Copyright &y& Elsevier]

Recent advances in biotechnology and translational research have made it possible to provide treatment modalities that protect the vital pulp, allow manipulation of reactionary and reparative dentinogenesis, and, more recently, permit revascularization of an infected root canal space. These approaches are referred to as regenerative procedures. The method currently used to determine the origin of the tissue secreted during the repair/regeneration process is largely based on the identification of cellular markers (usually proteins) left by cells that were responsible for this tissue production. The presence of these proteins in conjunction with other indicators of cellular behavior (especially biomineralization) and analysis of the structure of the newly generated tissue allow conclusions to be made of how it was formed. Thus far, it has not been possible to truly establish the biological mechanism controlling tertiary dentinogenesis. This article considers current therapeutic techniques to treat the dentin-pulp complex and contextualize them in terms of reparative and regenerative processes. Although it may be considered a semantic argument rather than a biological one, the definitions of regeneration and repair are explored to clarify our position in this era of regenerative endodontics. [ABSTRACT FROM AUTHOR]