Search

Coherent multistatic radio imaging represents a pivotal opportunity for forthcoming wireless networks, which involves distributed nodes cooperating to achieve accurate sensing resolution and robustness. This paper delves into cooperative coherent imaging for vehicular radar networks. Herein, multiple radar-equipped vehicles cooperate to improve collective sensing capabilities and address the fundamental issue of distinguishing weak targets in close proximity to strong ones, a critical challenge for vulnerable road users’ protection. We prove the significant benefits of cooperative coherent imaging in the considered automotive scenario in terms of both probability of correct detection, evaluated considering several system parameters, as well as resolution capabilities, showcased by a dedicated experimental campaign wherein the collaboration between two vehicles enables the detection of the legs of a pedestrian close to a parked car. Moreover, as coherent processing of several sensors’ data requires very tight accuracy on clock synchronization and sensor’s positioning—referred to as phase synchronization—(such that to predict sensor-target distances up to a fraction of the carrier wavelength), we present a general three-step cooperative multistatic phase synchronization procedure, detailing the required information exchange among vehicles in the specific automotive radar context and assessing its feasibility and performance by hybrid Cramér-Rao bound.

Integrated sensing and communication (ISAC) systems are recognized as one of the key ingredients of the sixth generation (6G) network. A challenging topic in ISAC is the design of a single waveform combining both communication and sensing functionalities on the same time-frequency-space resources, allowing tuning the performance of both with partial or full hardware sharing. This paper proposes a dual-domain waveform design approach that superposes onto the frequency-time (FT) domain both the legacy orthogonal frequency division multiplexing (OFDM) signal and a sensing one, purposely designed in the delay-Doppler domain. With a proper power downscaling of the sensing signal w.r.t. OFDM, it is possible to exceed regulatory bandwidth limitations proper of legacy multicarrier systems to increase the sensing performance while leaving communication substantially unaffected. Numerical and experimental results prove the effectiveness of the dual-domain waveform, notwithstanding a power abatement of at least 30 dB of the signal used for sensing compared to the one used for communication. The dual-domain ISAC waveform outperforms both OFDM and orthogonal time-frequency-space (OTFS) in terms of Cramér-Rao bound on delay estimation (up to 20 dB), thanks to its superior resolution, with a negligible penalty on the achievable rate.

Space-time modulated metasurfaces (STMMs) are a newly investigated technology for the next 6G generation wireless communication networks. An STMM augments the spatial phase function with a time-varying one across the meta-atoms, allowing for the conveyance of information that possibly modulates the impinging signal. Hence, STMM represents an evolution of reconfigurable intelligent surfaces (RIS), which only design the spatial phase pattern. STMMs convey signals without a relevant increase in the energy budget, which is convenient for applications where energy is a strong constraint. This paper proposes a mathematical model for STMM-based wireless communication, that creates the basics for two potential STMM architectures. One has excellent design flexibility, whereas the other is more cost-effective. The model describes STMM’s distinguishing features, such as space-time coupling, and their impact on system performance. The proposed STMM model addresses the design criteria of a full-duplex system architecture, in which the temporal signal originating at the STMM generates a modulation overlapped with the incident one. The presented numerical results demonstrate the efficacy of the proposed model and its potential to revolutionize wireless communication.

Target-to-user (T2U) association is a prerequisite to fully exploit the potential of the sensing function in communication-centric integrated sensing and communication (ISAC) systems, e.g., for beam and blockage management. This letter proposes to purposely mount a RIS on the roof of the vehicular user equipment (VUE), which can serve as an intentional back-reflector towards the base station. By controlling the reflection pattern over time, it is possible to transmit information to the sensing system, i.e., back-reflection as bit 1, no back-reflection as bit 0. The VUEs are configured to back-reflect a Hadamard code sequence, which enables T2U association. The numerical results confirm the validity of our proposal.

With the advent of self-driving vehicles, autonomous driving systems will have to rely on a vast number of heterogeneous sensors to perform dynamic perception of the surrounding environment. Synthetic Aperture Radar (SAR) systems increase the resolution of conventional mass-market radars by exploiting the vehicle’s ego-motion, requiring very accurate knowledge of the trajectory, usually not compatible with automotive-grade navigation systems. In this setting, radar data are typically used to refine the navigation-based trajectory estimation with so-called autofocus algorithms. Although widely used in remote sensing applications, where the timeliness of the imaging is not an issue, autofocus in automotive scenarios calls for simple yet effective processing options to enable real-time environment imaging. This paper aims at providing a comprehensive theoretical and experimental analysis of the autofocus requirements in typical automotive scenarios. We analytically derive the effects of navigation-induced trajectory estimation errors on SAR imaging, in terms of defocusing and wrong targets’ localization. Then, we propose a motion estimation and compensation workflow tailored to automotive applications, leveraging a set of stationary Ground Control Points (GCPs) in the low-resolution radar images (before SAR focusing). We theoretically discuss the impact of the GCPs position and focusing height on SAR imaging, highlighting common pitfalls and possible countermeasures. Finally, we show the effectiveness of the proposed technique employing experimental data gathered during open road campaign by a 77 GHz multiple-input multiple-output radar mounted in a forward-looking configuration.

In future 6G millimeter-wave/sub-THz vehicle-to-everything communication systems, vehicles are expected to be equipped with massive antenna arrays to compensate for the severe path loss. However, vehicle-to-vehicle (V2V) direct links are prone to blockage by surrounding vehicles. Emerging metasurface technologies enable the control of the electromagnetic wave reflection towards the desired direction to boost communication performance. Reconfigurable intelligent surfaces (RIS), and the pre-configured counterpart intelligent reflecting surfaces (IRS), are promising low-cost relaying systems for 6G. This paper proposes the usage of conformal metasurfaces (C-RIS or C-IRS) deployed on vehicles’ body to mitigate the blockage impact by creating artificial reflections, compensating for the non-flat shape of the vehicle’s body with proper phase patterns. We analytically derive the phase pattern for a cylindrical C-RIS/C-IRS, accounting for the shape of the car body, which generalizes the conventional planar ones. We propose a novel design for optimally pre-configured C-IRS proving its benefits in a V2V highway scenario. The traffic simulation results show a reduction of blockage probability by 20% for C-IRS and 70% for C-RIS as a benchmark, as well as a remarkable improvement in average signal-to-noise ratio by 10–20 dB for C-IRS and 30–40 dB for C-RIS.

This letter deals with the problem of beampointing in millimeter-wave (mmWave) vehicle-to-vehicle (V2V) communications. We analyze the impact of the road roughness and the antenna position (rooftop or bumper) by evaluating the beamforming loss with respect to an ideal system. We propose an analytical framework which integrates the model of road profile, its damping through the vehicle suspensions and the transfer to the antenna dynamics. We consider the use of a sensor-assisted and cooperative V2V beam tracking methodology at the two vehicles. Results highlight the advantages of the sensor assisted beam tracking and suggest the usage of rooftop-mounted antennas.