Search

In guided bone regeneration (GBR), a barrier membrane is applied to provide a space for bone regeneration to promote cell adhesion, cell proliferation, and bone regeneration by inducing cell migration to the surface of the bone-deficient site. We prepared a non-woven absorbable membrane for GBR comprised of a copolymer of L-lactic acid and glycolic acid (PLLGA) using the dry spinning method. A thin and dense membrane comprising unsintered hydroxyapatite (uHA) and poly-L-lactic acid (PLLA) was used for comparison. Osteoblast TMS-12 cells were seeded onto the membranes, and cell adhesion and proliferation rates were examined. Calcification levels were quantified by Alizarin Red S staining after cell culture in calcification induction medium. Osteoblastic gene expression was examined by RT-PCR. Cell adhesion and proliferation rates and calcification on PLLGA membranes were significantly higher than those on uHA/PLLA membranes. PLLGA membranes upregulated osteogenic gene expression compared to on uHA/PLLA membranes. Non-woven PLLGA membranes may be useful in GBR for promoting bone formation and maturation [ABSTRACT FROM AUTHOR]

Hydroxyapatite (HA) [Ca10 (PO4)6 (OH)2] has a high degree of chemical similarity with the mineral composition of animal bone. Hydroxyapatite fiber scaffold (HAF) is a biological material with a highly interconnected porous structure. We aimed to study the physical and biological characteristics of HAF and compare the osteogenic effects of HAF, natural osteogenic materials (NOM), and carbonate apatite (CO3Ap-DP) in the parietal defects of a rabbit’s skull. X-ray analysis and histological assessment showed that HAF followed a trend of early initial osteogenesis and bone trabecular structure formation, especially at the cortical bone portion. Compared to the other two materials, HAF was more absorptive. Results indicated that HAF had the same osteoconductive and new bone formation properties as NOM and CO3Ap-DP. These findings will provide options for future material development and novel protocols for use in surgeries, ultimately leading to better patient outcomes. [ABSTRACT FROM AUTHOR]

Bio-Oss (BO), one of the bone substitutes, is extensively used for augmentation in dental field because it is highly biocompatible and osteoconductive, which however does not stimulate bone formation. Doxycycline (DOX), a widely-used antibiotic, shows inhibitory effects on inflammation and osteoclastogenesis, and it has been reported to stimulate bone formation. The objective of this study is to investigate the vertical bone formation with DOX doped BO in guided bone regeneration on rat calvaria. Forty rats underwent calvarial vertical augmentation surgeries. Twenty rats received BO whereas the others received DOX doped BO. The calvarias were harvested and analyzed radiologically, histologically and with RT-PCR at 4 and 8 weeks postoperatively. At 4 weeks, the area of mineralized new bone statistically increased in BO+DOX compared to BO, upregulations of TGFß1, BMP2 and ß-catenin were evident in BO+DOX. The present study demonstrates that BO+DOX improve vertical bone augmentation. [ABSTRACT FROM AUTHOR]

The effectiveness of a previously developed unsintered hydroxyapatite (uHA) and poly(L-lactic acid) (PLLA) hydrophilic membrane as a resorbable barrier for guided bone regeneration (GBR) was evaluated. Critical-size 8-mm diameter bone defects were surgically generated in the parietal bones of 24 12-week-old male Wistar rats, which were then divided into three groups in which either a uHA/PLLA or a collagen membrane or no membrane (control) was placed onto the bone defect. Following sacrifice of the animals 2 or 4 weeks after surgery, bone defects were examined using microcomputed tomography and histological analysis. Bone mineral density, bone mineral content, and relative bone growth area values 2 or 4 weeks after surgery were highest in the uHA/PLLA group. Four weeks after surgery, the relative bone growth area in the uHA/PLLA group was larger than that in the collagen group. The resorbable uHA/PLLA membrane is thus potentially effective for GBR. [ABSTRACT FROM AUTHOR]

Copyright of Implant Dentistry is the property of Lippincott Williams & Wilkins and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Implant Dentistry is the property of Lippincott Williams & Wilkins and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Strontium (Sr) ions were added to calcium- and phosphate-containing porous titanium oxide layers formed by micro-arc oxidation (MAO) of titanium (Ti) substrates to improve their osseointegration. An MC3T3-E1 preosteoblast was used to evaluate the effect of the incorporated Sr species on cell calcification. Similar surface microporous morphologies of the oxide layers were observed for all specimens produced by MAO, while the contents of the incorporated Sr ions increased with increasing Sr concentrations in MAO electrolytes. The calcium- and phosphate-containing porous layers promoted the cell alkaline phosphatase (ALP) activity, while cell calcification was promoted by the Sr addition. In particular, the ALP activity significantly increased after 10 days of culture, and larger areas of calcified deposits were observed for the specimens treated with MAO electrolytes containing 0.15 mol L−1 of Sr species. The effect of Sr addition on the calcification of the MAO-treated Ti oxide layers was established in this study. [ABSTRACT FROM AUTHOR]

Purpose: The aim of this study was to compare the effect of ligatureinduced periimplantitis on dental implants with and without hydroxyapatite (HA) coat. Methods: Thirty-two dental implants (3.3 mm wide, 13 mm long) with 4 surface treatments (8 implant/group) (M: machined, SA: sandblasted acid etched, S: sputter HA coat and P: plasma-sprayed HA coat) were inserted into canine mandibles. After 12 weeks, oral hygiene procedures were stopped and silk ligatures were placed around the implant abutments to allow plaque accumulation for the following 16 weeks. Implants with the surrounding tissues were retrieved and prepared for histological examination. Bone-toimplant contact (BIC) and implant surfaces were examined using scanning electron microscopy and energy dispersive x-ray spectroscopy. Results: Histological observation revealed marginal bone loss and large inflammatory cell infiltrates in the periimplant soft tissue. Sputter HA implants showed the largest BIC (98.1%) and machined implant showed the smallest values (70.4%). After 28 weeks, thin sputter HA coat was almost completely dissolved, whereas plasma-sprayed HA coat showed complete thickness preservation. Conclusion: Thin sputter HAcoated implants showed more bone implant contact and less marginal bone loss than thick HA-coated implants under periimplantitis condition. [ABSTRACT FROM AUTHOR]

Copyright of Implant Dentistry is the property of Lippincott Williams & Wilkins and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Purpose: This study evaluated the mechanism of an abutment fracture by means of a case-based finite element (FE) stress analysis. Materials and Methods: A patient presented with a complaint of fracture of an implant-retained single posterior restoration that had been in place for 6 years. The retrieved restoration was examined on the original working cast and subjected to microscopic observation for fracture surface analysis. A case- based FE analysis was conducted to detect the location and magnitude of stress concentration in the implant structures. Results: The fracture occurred at the concave neck of the abutment, with an evidence of fatigue fracture on the titanium surface. Ratchet marks were shown at the distal lingual edge, indicating that the crack proceeded from distolingual to mesial direction. The highest maximum tensile stress at the distolingual concave neck of the abutment was shown when the load was directed on the internal and external surfaces of the mesial buccal cusp. Conclusions: It is suggested that an offset loading because of the cantilever structure caused a high tensile stress on the distolingual edge, resulting in the fatigue fracture of the abutment. [ABSTRACT FROM AUTHOR]

A novel coating technique of thin ceramic layer resembling teeth color on titanium (Ti) surface was developed by combination of sputter deposition of metal zirconium (Zr) and subsequent micro-arc oxidation (MAO) treatment. The oxide layer grown by MAO treatment had a porous structure with a thickness of approximately 6 micrometers and was mainly composed of zirconium dioxide (ZrO2) with both tetragonal and monoclinic crystal structures. The surface of the specimen was hardened by this technique, and the hardness of the specimen was significantly larger than that of untreated Ti and MAO-treated Ti without Zr layer. The bonding strength test revealed that fracture occurred inside the oxide layer, indicating that adhesion between the oxide layer and the Ti substrate was sufficiently strong. From these results, this technique has an advantage for the development of novel dental materials with excellent mechanical and aesthetic properties. [ABSTRACT FROM AUTHOR]

Copyright of Implant Dentistry is the property of Lippincott Williams & Wilkins and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Implant Dentistry is the property of Lippincott Williams & Wilkins and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Implant Dentistry is the property of Lippincott Williams & Wilkins and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)