Search

Irradiating a small capsule containing deuterium and tritium fuel directly with intense laser light causes it to implode, which creates a plasma hot enough to initiate fusion reactions between the fuel nuclei. Here we report on such laser direct-drive experiments and observe that the fusion reactions produce more energy than the amount of energy in the central so-called hot-spot plasma. This condition is identified as having a hot-spot fuel gain greater than unity. A hot-spot fuel gain of around four was previously accomplished at the National Ignition Facility in indirect-drive inertial confinement fusion experiments where the capsule is irradiated by X-rays. In that case, up to 1.9 MJ of laser energy was used, but in contrast, our experiments on the OMEGA laser system require as little as 28 kJ. As the hot-spot fuel gain is predicted to grow with laser energy and target size, our work establishes the direct-drive approach to inertial fusion as a promising path towards burning and ignited plasmas in the laboratory. Additionally, we report a record (direct-drive) fusion yield of 0.9 kJ on OMEGA, which we achieved with thin-ice deuterium–tritium liner targets.

Focussing laser light onto the surface of a small target filled with deuterium and tritium implodes it and leads to the creation of a hot and dense plasma, in which thermonuclear fusion reactions occur. In order for the plasma to become self-sustaining, the heating of the plasma must be dominated by the energy provided by the fusion reactions—a condition known as a burning plasma. A metric for this is the generalized Lawson parameter, where values above around 0.8 imply a burning plasma. Here, we report on hydro-equivalent scaling of experimental results on the OMEGA laser system and show that these have achieved core conditions that reach a burning plasma when the central part of the plasma, the hotspot, is scaled in size by at least a factor of 3.9 ± 0.10, which would require a driver laser energy of at least 1.7 ± 0.13 MJ. In addition, we hydro-equivalently scale the results to the 2.15 MJ of laser energy available at the National Ignition Facility and find that these implosions reach 86% of the Lawson parameter required for ignition. Our results support direct-drive inertial confinement fusion as a credible approach for achieving thermonuclear ignition and net energy in laser fusion.

The full-beam in-tank (FBIT) diagnostic has been deployed to directly measure the target-plane beam fluence profile, when operated at high energy, of the OMEGA Laser System at the University of Rochester’s Laboratory for Laser Energetics. This paper presents the results of early measurements taken with this diagnostic and discusses an improvement that has overcome performance limitations discovered during the initial testing. The diagnostic gives new insight into the ability of the OMEGA Laser System to provide uniform fluence profiles that are consistent across all 60 beams in the laser. The ultimate goal of the FBIT diagnostic is to allow accurate assessment of the fluence uniformity on a spherical target in 60-beam implosion experiments.

Focusing laser light onto a very small target can produce the conditions for laboratory-scale nuclear fusion of hydrogen isotopes. The lack of accurate predictive models, which are essential for the design of high-performance laser-fusion experiments, is a major obstacle to achieving thermonuclear ignition. Here we report a statistical approach that was used to design and quantitatively predict the results of implosions of solid deuterium–tritium targets carried out with the 30-kilojoule OMEGA laser system, leading to tripling of the fusion yield to its highest value so far for direct-drive laser fusion. When scaled to the laser energies of the National Ignition Facility (1.9 megajoules), these targets are predicted to produce a fusion energy output of about 500 kilojoules—several times larger than the fusion yields currently achieved at that facility. This approach could guide the exploration of the vast parameter space of thermonuclear ignition conditions and enhance our understanding of laser-fusion physics.

OMEGA EP (Extended Performance) is a petawatt-class addition to the existing 30-kJ, 60-beam OMEGA Laser Facility at the University of Rochester. When completed, it will consist of four beamlines, each capable of producing up to 6.5 kJ at 351 nm in a 1 to 10 ns pulse. Two of the beamlines will produce up to 2.6 kJ in a pulse-width range of 1 to 100 ps at 1053 nm using chirped-pulse amplification (CPA). This paper reviews both the OMEGA EP performance objectives and the enabling technologies required to meet these goals.

Direct-drive inertial confinement fusion (ICF) is expected to demonstrate high gain on the National Ignition Facility (NIF) in the next decade and is a leading candidate for inertial fusion energy production. The demonstration of high areal densities in hydrodynamically scaled cryogenic DT or D2implosions with neutron yields that are a significant fraction of the “clean” 1-D predictions will validate the ignition-equivalent direct-drive target performance on the OMEGA laser at the Laboratory for Laser Energetics (LLE). This paper highlights some of the recent experimental and theoretical progress toward this validation.
The NIF will initially be configured for x-ray drive and with no beams placed at the target equator to provide a symmetric irradiation of a direct-drive capsule. LLE is developing the “polar-direct-drive” (PDD) approach that repoints beams toward the target equator. Initial 2-D simulations have shown ignition. 
LLE is currently constructing the multibeam, 2.6-kJ/beam, petawatt laser system OMEGA EP. Integrated fast-ignition experiments, combining the OMEGA EP and OMEGA laser systems, will begin in FY08.

The rise and uncertainty in energy prices in recent years has widened the solution search space by industry to understand the full impacts on operations and to develop a range of workable solutions to reduce risk. This has involved companies exploring alternative approaches to co-create solutions with different groups comprising varying intellectual capital, e.g. consultants, NGOs, and academia. This paper presents the small-scale transdisciplinary process adopted by Nestlé UK in partnership with the University of Surrey as part of an Engineering Doctorate (EngD) programme to co-develop a heat integration framework to improve the energy efficiency of a confectionery factory. The small-scale co-creation process—between industry and academia—for a heat integration framework is described and includes a set of criteria to evaluate the effectiveness of the process. The results of the evaluation process and a reflection of the key challenges and implications faced when trying to implement a small-scale transdisciplinary process are reported which covers the role of an EngD researcher as a manager, facilitator and researcher, time management, finance, communication, knowledge integration, mutual learning, and conflict. Some of the key recommendations for industrial practitioners include: actively engaging in the transdisciplinary process on a consistent basis, staying open minded to developing a solution even when there is a lack of progress, and building relationships with academics by supporting university activities, e.g. lecturing, research projects and funding proposals. For scientists, PhD students, research institutes, and private and public R&D, some of the key recommendations include: communicating expert knowledge to a few points rather than opening out into a lecture, contributing to the transdisciplinary process even if it is on a non-expert level but provides objective and critical input, and visiting industrial sites to gain exposure to industrial problems first-hand. Overall, the range of recommendations provided can help both industrial practitioners and scientists, especially doctoral students seeking to operate in the industry–academia domain on a small—practically manageable—scale.

Many manufacturing companies recognise the need to produce products that are cleaner, greener, and environmentally sustainable, yet they are only at the early stages of this transition in addressing the symptoms of unsustainability at their direct operations by reducing waste and the use of energy, water and material. The implementation of reductions in these areas can be disparate and minimal given the life cycle of a product. Bridging the gap between the rhetoric of sustainable manufacturing and reality requires a holistic, systems thinking approach to ensure the implementation of sustainability is unified and strategic. This paper presents a novel environmentally sustainable manufacturing framework that encompasses energy, water, waste, biodiversity, and people & community. It adopts a systems thinking perspective to address the factories ‘environmental life cycle impact to deliver factory and supply chain benefits. The insights from the application at a Nestlé confectionery factory are reported.

An abstract of the article "Problem structuring methods: Theorizing the benefits of deconstructing sustainable development projects," by S. Bell and S. Morse, that was published in the May 2007 issue of "Journal of the Operational Research Society" is presented.

Tensile tests have been carried out in the rolling and transverse directions of 'interstitialfree' (IF) steel cold rolled to a strain of εh= -0.18. Tests in the transverse direction showed the characteristic features of the orthogonal strain path change effect, with an initially increased flow stress- compared to tests in the rolling direction- followed by a transient regime of very low strain hardening. Tests were also carried out following recovery annealing of the prestrained sheet at 500°C and 600°C. Static recovery had a marked effect on the strain-induced anisotropy, but this was not eliminated even when the cell structure generated by prestraining haD condensed to one consisting of low-angle boundaries. This supports the view that the length scale, with respect to active slip systems, between boundary obstacles is a significant factor in the orthogonal path change effect.

In this paper, the yield increases resulting from the cultivation of Bt cotton in Maharashtra, India, are analysed. The study relies on commercial farm, rather than trial, data and is among the first of its kind to be based on real farm and market conditions. Findings show that since its commercial release in 2002, Bt cotton has had a significant positive impact on yields and on the economic performance of cotton growers in Maharashtra. This difference remains even after controlling for different soil and insecticide inputs in the production of Bt cotton. There is also significant spatial and temporal variation in this 'benefit', and much depends upon where production is taking place and on the season.

In this paper, the yield increases resulting from the cultivation of Bt cotton in Maharashtra, India, are analysed. The study relies on commercial farm, rather than trial, data and is among the first of its kind to be based on real farm and market conditions. Findings show that since its commercial release in 2002, Bt cotton has had a significant positive impact on yields and on the economic performance of cotton growers in Maharashtra. This difference remains even after controlling for different soil and insecticide inputs in the production of Bt cotton. There is also significant spatial and temporal variation in this‘benefit’, and much depends upon where production is taking place and on the season.

OMEGA EP (Extended Performance) is a petawatt-class addition to the existing 30-kJ, 60-beam OMEGA Laser Facility at the University of Rochester. When completed, it will consist of four beamlines, each capable of producing up to 6.5?kJ at 351?nm in a 1 to 10?ns pulse. Two of the beamlines will produce up to 2.6?kJ in a pulse-width range of 1 to 100?ps at 1053?nm using chirped-pulse amplification (CPA). This paper reviews both the OMEGA EP performance objectives and the enabling technologies required to meet these goals.

Direct-drive inertial confinement fusion (ICF) is expected to demonstrate high gain on the National Ignition Facility (NIF) in the next decade and is a leading candidate for inertial fusion energy production. The demonstration of high areal densities in hydrodynamically scaled cryogenic DT or D2 implosions with neutron yields that are a significant fraction of the ?clean? 1-D predictions will validate the ignition-equivalent direct-drive target performance on the OMEGA laser at the Laboratory for Laser Energetics (LLE). This paper highlights some of the recent experimental and theoretical progress toward this validation.?The NIF will initially be configured for x-ray drive and with no beams placed at the target equator to provide a symmetric irradiation of a direct-drive capsule. LLE is developing the ?polar-direct-drive? (PDD) approach that repoints beams toward the target equator. Initial 2-D simulations have shown ignition. ?LLE is currently constructing the multibeam, 2.6-kJ/beam, petawatt laser system OMEGA EP. Integrated fast-ignition experiments, combining the OMEGA EP and OMEGA laser systems, will begin in FY08.

AbstractA high-energy petawatt laser, OMEGA EP, is currently under construction at the University of Rochester's Laboratory for Laser Energetics. Integrated into the existing OMEGA laser, it will support three major areas of research: (a) backlighting of high-energy-density plasmas, (b) integrated fast ignition experiments, and (c) high-intensity physics. The laser will provide two beams combined collinearly and coaxially with short pulses (~1 to 100 ps) and high energy (2.6 kJ at 10 ps). Cone-in-shell fuel-assembly experiments and simulations of short-pulse heated cryogenic targets are being performed in preparation for cryogenic integrated fast ignitor experiments on OMEGA EP.

Catastrophic disasters create surge capacity needs for health care systems. This is especially true in the urban setting because the high population density and reliance on complex urban infrastructures (e.g., mass transit systems and high rise buildings) could adversely affect the ability to meet surge capacity needs. To better understand responsiveness in this setting, we conducted a survey of health care workers (HCWs) (N=6,428) from 47 health care facilities in New York City and the surrounding metropolitan region to determine their ability and willingnessto report to work during various catastrophic events. A range of facility types and sizes were represented in the sample. Results indicate that HCWs were most ableto report to work for a mass casualty incident (MCI) (83%), environmental disaster (81%), and chemical event (71%) and least ableto report during a smallpox epidemic (69%), radiological event (64%), sudden acute respiratory distress syndrome (SARS) outbreak (64%), or severe snow storm (49%). In terms of willingness, HCWs were most willingto report during a snow storm (80%), MCI (86%), and environmental disaster (84%) and least willingduring a SARS outbreak (48%), radiological event (57%), smallpox epidemic (61%), and chemical event (68%). Barriers to ability included transportation problems, child care, eldercare, and pet care obligations. Barriers to willingness included fear and concern for family and self and personal health problems. The findings were consistent for all types of facilities. Importantly, many of the barriers identified are amenable to interventions.

This paper explores some of the issues involved in the Genetic Modification (GM) debate by focusing on one crop that has been modified for pest resistance, cotton (Gossypium hirsutum), and commercially released to small-scale farmers in the Makhathini Flats, KwaZulu Natal, the Republic of South Africa. This was the first commercial release of a GM variety (Bt-cotton) in Sub-Saharan Africa, and thus provides valuable and timely insights into some of the potential advantages and disadvantages of the technology for small-scale farmers in Africa. Even though there are wider concerns regarding the vulnerability of small-scale farmers in the area, the survey results suggest that Bt-cotton generated higher yields and gross margins than non-Bt-cotton. In addition, Bt-cotton significantly reduced the use of pesticide with consequent potential benefits to human health and the environment.

This paper presents the results of: (a) On-farm trials (eight) over a two-year period designed to test the effectiveness of leguminous cover crops in terms of increasing maize yields in Igalaland, Nigeria. (b) A survey designed to monitor the extent of, and reasons behind, adoption of the leguminous cover crop technology in subsequent years by farmers involved, to varying degrees, in the trial programme. Particular emphasis was placed on comparing adoption of leguminous cover crops with that of new crop varieties released by a non-governmental organization in the same area since the mid 1980s. While the leguminous cover crop technology boosted maize grain yields by 127 to 136% above an untreated control yield of between 141 and 171 kg ha−1, the adoption rate (number of farmers adopting) was only 18%. By way of contrast, new crop varieties had a highly variable benefit in terms of yield advantage over local varieties, with the best average increase of around 20%. Adoption rates for new crop varieties, assessed as both the number of farmers growing the varieties and the number of plots planted to the varieties, were 40% on average. The paper discusses some key factors influencing adoption of the leguminous cover crop technology, including seed availability. Implications of these results for a local non-governmental organization, the Diocesan Development Services, concerned with promoting the leguminous cover crop technology are also discussed.

This paper presents the results of extensive experience in the development and promotion of tobacco-based insecticides for the control of field crop pests in Igalaland, Nigeria. A non-governmental organization (NGO), the Diocesan Development Services (DDS), became involved in the development of tobacco-based insecticides in the early 1990s, and facilitated a series of ‘on-farm’ trials between 1997 and 2000 designed to test the effectiveness of such insecticides for two crops that are particularly vulnerable to pest attack in Igalaland: cowpea (Vigna unguiculata) and maize (Zea mays). The results suggest that even crude tobacco formulations had a significant benefit on cowpea and maize yields relative to the absence of pest control, although commercial insecticides were more effective. However, while having advantages of cost and availability over commercial insecticides, tobacco-based products appear to have serious internal and external disadvantages that limit their widespread use, and some of these are discussed. It is concluded that while technical efficacy of botanicals is an important element, there are others such as the logistics of production and preparation that need to be considered. A better understanding of the balance between these factors and how context-specific they may be is required in order to maximize their adoption by farmers under ‘resource-poor’ conditions.

The 67 k calcimedin is a Ca2+-binding protein present in both muscle cells and peritoneal macrophages. Many tissues, including lymphoid tissues, liver and lymphocytes, have been shown to contain Ca2+-binding proteins of similar molecular size, such as the p67(67 kDa) calelectrin or the 68 kDa lymphocyte protein. We have tested affinity-purified antibodies raised to the smooth-muscle 67 k calcimedin in these several tissues and here report that the 67 k calcimedin is not detectable in liver, thymus, spleen or thymic lymphocytes. These findings support recent biochemical evidence, discussed here, suggesting that the 67 k calcimedin is a protein different from calelectrin and the 68 kDa lymphocyte protein. The more limited tissue distribution of the 67 k calcimedin, which includes muscle and macrophages, suggests that the 67 k calcimedin may function in Ca2+-mediated events special to these cell types. The affinity-purified antibodies to the 67 k calcimedin will be useful in obtaining information concerning the special roles of this Ca2+-binding protein in these cells.

AbstractThe finger structures described earlier by Brown and later by Butcher, Young & Faithfull involve dissolution of troctolite during crystallization of olivine, followed by crystallization of pyroxene around olivine grains in the fingers. However, the ingestion of troctolite takes the liquid away from pyroxene saturation rather than toward it. The pyroxene field can be encountered metastably, and pyroxene caused to crystallize, by supercooling the olivine-rich liquid against the troctolite. The melt corrosion represented by the fingers, and other field relations, suggest that the mafic layers were emplaced as sills of mafic magma into nearly solid troctolites. Melting at the base of mafic liquid layers was impeded by a bed of olivine crystals releasing light solute upward, causing compositional convention and rapid heat transfer to the top of the layer, where melting demonstrably occurred. Recognition of this process introduces the novel concept of a magmatic heat pump driven by compositional convection. The crystallization path ol?px?pl(?sp) is also found next to xenoliths in the Kiglapait Intrusion where the magma was normally saturated only in ol+pl, directly demonstrating the effect of supercooling on the crystallization sequence.

The extent and causes of yam (Dioscorea rotundata) tuber rots were investigated in Igalaland, Nigeria. Rots were found to be associated with prior physical damage in almost all cases. Numerous fungal species were isolated from the infected lesions of which Fusariumspp. predominated, not Botrydiplodia theobromaeas previously reported in other studies. None of the fungi was able to infect undamaged yams in laboratory experiments. The damage was caused by both biotic and abiotic factors of which the yam beetle (Heteroligus meles) was the largest single cause. There were significant differences in the frequency with which different varieties of yam were attacked by H. melesand found to be infected with Fusariumspp. In an independent survey of farmers’ experience of yam rots, varieties that scored well correlated with apparent resistance to the beetle and Fusariumspp. These studies highlight the importance of yam beetle infestation and the need to have independent methods for varietal authentication.

Haemophilus ducreyi is the causative agent of chancroid, one of the genital ulcerative diseases. H. ducreyi is the major cause of genital ulcer disease in Africa and Southeast Asia and is of increasing concern in the United States. Definitive diagnosis of chancroid requires the isolation and identification of H. ducreyi, but isolation of this organism is difficult and the available medium is not optimal for all strains. Fluorescent antibody and serologic tests are of limited value. In general, our knowledge of this organism is rather limited, and indeed, recent studies have questioned the placement of H. ducreyi in the genus Haemophilus. H. ducreyi has relatively few biochemical activities, and epidemiologic studies are limited because there are limited phenotypic markers available for strain typing. Specific virulence factors of H. ducreyi have yet to be identified. Antimicrobial resistance in H. ducreyi is of special concern, as this organism has acquired both gram-negative and gram-positive resistance determinants. In addition, some of these determinants can be mobilized and transferred to other Haemophilus species or to Neisseria gonorrhoeae.

Strains of Neisseria gonorrhoeae were treated with pyocin 611 131 (pyocin 103) from Pseudomonas aeruginosa PA103, and isogenic resistant variants were isolated. The interaction of pyocin-sensitive and isogenic pyocin-resistant strains with wheat germ agglutinin (WGA) agglutinated all pyocin-sensitive, but not pyocin-resistant, strains. Binding of WGA to three pyocin-sensitive strains and their isogenic pyocin-resistant variants was examined quantitatively by using fluorescein-conjugated lectin. Pyocin-resistant strains maximally bound one-third to one-eighth the quantity of WGA bound by isogenic-sensitive strains. Linear Scatchard plots revealed homogeneous WGA-binding sites on three pyocin-sensitive and one pyocin-resistant strains. Biphasic Scatchard plots, obtained with two pyocin-resistant strains, show that WGA-binding sites in these strains are heterogeneous. The number of WGA-binding sites for pyocin-sensitive organisms ranged from 8 x 10(5) to 1 x 10(6) sites per coccus and from 1 x 10(5) to 3 x 10(5) sites per coccus for pyocin-resistant strains. The apparent association constant for WGA binding to pyocin-sensitive strains ranged from 3 x 10(6) to 6 x 10(6) liters/mol and from 6 x 10(6) to 1 x 10(7) liters/mol for pyocin-resistant strains. Gonococcal lipopolysaccharide was shown to serve as the pyocin 103 receptor by inhibition of pyocin activity. Lipopolysaccharide from a pyocin 103-resistant strain was not able to inhibit pyocin 103 activity. Pyocin 103 resistance was correlated with a structural alteration involving N-acetylglucosamine residues in gonococcal lipopolysaccharide. Based on interactions with wheat germ, soybean, and ricin lectins, a model of lipopolysaccharide structure in N. gonorrhoeae is presented.

The arrangement of proteins in the outer membrane of Neisseria gonorrhoeae was investigated through the use of cleavable chemical cross-linking reagents and two-dimensional sodium dodecyl sulfate-polyacrylamide gel electrophoresis. Cross-linking of isolated outer membranes yielded dimers and trimers of the major outer membrane protein. In addition, data were obtained suggesting that a stable interaction exists between the major protein I and protein II, the second most prevalent protein in the gonococcal outer membrane.

This report describes a method to purify the major iron-regulated protein (MIRP) expressed by N. gonorrhoeae and N. meningitidis. This purification procedure involves maximal expression of the MIRP by growing the organisms on iron-limited media; cellular disruption by sonication followed by centrifugal fractionation; selective solubilization of the MIRP with the cationic detergent hexadecyltrimethylammonium bromide; cation-exchange chromatography in the presence of this detergent; and gel filtration chromatography. The MIRP purified by this technique migrates as a single band when analyzed by SDS-PAGE. The purified MIRP displayed an unusually basic isoelectric point, this value being greater than 9.35. Further biochemical analysis revealed the highly conserved nature of this protein isolated from the two pathogenic species of the genus Neisseria. For example, the amino acid composition of the meningococcal and gonococcal MIRPs were nearly identical and amino terminal sequence analysis showed that both shared the identical primary sequence through residue 48. Surprisingly, the first five NH2-terminal residues of the MIRPs exhibited homology with the first five residues of the gonococcal porin, protein I. Purified preparations of the MIRP exhibited a characteristic pink color reminiscent of the basic iron-binding protein lactoferrin. This observation coupled with the property of iron-regulation prompted us to analyze purified MIRP for iron-content. Approximately 0.5 mol iron per 1 mol of MIRP was detected. This study is the first to show that iron is associated with the MIRP, a property that may implicate this protein as playing a direct role in neisserial iron assimilation. While the precise function of the MIRP is not known, the availability of this protein in pure and biologically relevant quantities will allow further studies to elucidate its pathobiologic function.

The utilization of amino acids and other compounds as carbon and energy sources by Legionella pneumophila was examined. Based on the stimulation of oxygen consumption in washed-cell suspensions, glutamate, serine, threonine, and tyrosine were the only amino acids which were utilized as energy sources. Other stimulators of oxygen uptake were lactate, pyruvate, acetate, fumarate, and succinate. Citrate was a good stimulator only when the bacteria were grown in the presence of the substrate. Radiolabeling studies showed that [14C]glutamate was rapidly metabolized, with the label distributed evenly in all cell fractions. [14C]pyruvate and [14C]acetate were incorporated into the lipid-containing cell fraction, whereas glucose and glycerol were found in both the lipid- and polysaccharide-containing cell fractions. Radiorespirometry of differentially labeled [14C]glucose indicated that this compound was metabolized primarily by the pentose phosphate and Entner-Doudoroff pathways rather than by the glycolytic pathway.

DIMBOA glucoside (2-O-/gb-D-glucopyranosyl-4-hydroxy-7-meth-oxy-1,4-benzoxazin-3-one), the main hydroxamic acid (Hx) in intact wheat plants, was detected in the honey dew ofRhopalosiphum padi feeding on seedlings of six wheat cultivars that differed in their concentration of Hx, suggesting that the chemical circulates in the phloem. Neither the aglucone (DIMBOA) nor its main breakdown product were found in any of the honeydew samples. Honey dew production by aphids caged on seedlings of the wheat cultivars and DIMBOA glucoside concentrations in the honeydew followed biphasic curves when plotted against Hx concentration, suggesting passive ingestion of the chemical from the phloem at low Hx concentrations and limited ingestion due to feeding deterrency by Hx in mesophyll cells at high Hx concentrations. The presence of plant toxins such as Hx glucosides in the phloem sap, the main ingesta of aphids, and in the mesophyll cells, has major implications for plant defense, through a feeding deterrent effect during stylet penetration, and deterrency (antixenosis) along with antibiosis during feeding.

The experiment examined how nitrogen applied to a maize crop was partitioned when the maize was intercropped with beans. Treatments consisted of 2, 4 and 6 rows of beans at within-row spacings of 20 or 10 cm sown between ‘maize' rows in which maize was either present or absent. Nitrogen was applied at 0, 30, 60, 90 or 120 kg ha⁻¹. Maize showed a large response to nitrogen and this was little affected by beans. All bean rows in all positions showed some response to nitrogen. The largest response was from the rows closest to the maize, but this response was similar whether these rows were 20, 40 or 60 cm from the maize. Beans gave a much greater response in the absence of maize, indicating that the main factor determining the partitioning of the nitrogen between the two crops was the superior competitive ability of the maize. It is suggested that the approach could be suitable for examining nitrogen partitioning in other non-legume/legume situations.

We examined the outer membrane proteins which appear during the growth of Neisseria gonorrhoeae F62 in complex medium supplemented with 25 microM Desferal mesylate, a potent iron chelator. Outer membranes were prepared by Sarkosyl extraction and analyzed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. Several higher-molecular-weight (74,000 to greater than 94,000) proteins increased under iron-limiting conditions. In addition we observed the appearance of an iron-regulated protein with an apparent molecular weight of 37,000. This protein comigrated with the gonococcal protein I under normal Laemmli gel conditions. By increasing the ionic strength of the lower gel buffer, separation of protein I and the 37,000-dalton iron-regulated protein occurred. The 37,000-dalton protein stained poorly with Coomassie blue. However, when a silver stain was used, the protein appeared as a major component of the gonococcal outer membrane. Production of this 37,000-dalton protein was suppressed by the addition of iron to the medium. An iron-regulated protein with a similar molecular weight was observed in four clinical isolates and in an additional laboratory strain. Peptide mapping indicated that the 37,000-dalton protein was distinct from protein I and was identical between strains of the WI and WII serogroups.

Genetic studies were carried out on seedling and agronomic characters amongst 50 sesame genotypes to estimate the genetic variation, determine the relationships amongst the characters and identify rapidly growing genotypes with vigorous seedling growth. The contribution of genetic variance was highest for the two mature characters, days to first flower (95.6) and number of nodes to first flower (95.2), and was mediumhigh (50-75) for most of the seedling characters. Strong positive genetic correlations were obtained between various cotyledon and early leaf characteristics measured at 20 days after sowing. Based on these results several genotypes were identified as having rapid seedling growth and these could form an initial gene pool to provide material for screening for tolerance to sesame flea beetle.

We recently found that the 16.4-kb conjugative transposon Tn916 could be introduced into Neisseria meningitidis by transformation and that it appeared to transpose to many different sites in the chromosome of recipient meningococci. In order to identify transposon-induced alterations of specific meningococcal virulence determinants, a library of meningococcal Tetr transformants containing Tn916 was made and screened for those altered in the production of group B capsular polysaccharide. A capsule-defective mutant, M7, was identified by using monoclonal and polyclonal antisera to group B polysaccharide in immunoblot and agar antiserum procedures. Growth of M7 was similar to that of the parent strain. M7 produced no group B capsular polysaccharide by rocket immunoelectrophoresis, and the mutation was stable during laboratory passage. The capsule-defective phenotype was linked to Tetr, as demonstrated by immunoblot and Southern blot analysis of progeny Tetr transformants (transformants of the parent strain obtained with DNA from M7). A capsule-deficient mutant, O8, was identified by using a similar approach. Analysis of the Tn916 insertions in M7 and O8 indicated that a significant portion of the transposon on either side of the tetM determinant had been lost. The ability of Tn916 to generate defined, stable mutations in meningococcal virulence determinants is demonstrated by our study.

The addition of 10 microgram of penicillin G per ml to log-phase cultures of Neisseria gonorrhoeae JW-31 (minimum inhibitory concentration for penicillin G, less than 0.007 microgram/ml) resulted in cellular lysis after a lag of 30 min. Penicillin markedly decreased the rate of peptidoglycan synthesis and enhanced the rate of hydrolysis of existing peptidoglycan. Hydrolysis was initiated immediately after addition of penicillin; cellular lysis did not occur until a considerable percentage of the peptidoglycan had been degraded. Cellular lysis was not due to penicillin per se but resulted from inhibition of cell wall synthesis. When cells were grown in media buffered with N-2-hydroxyethyl piperazine-N'-2-ethanesulfonic acid at pH 6, penicillin did not cause lysis; however, at this pH, peptidoglycan hydrolysis occurred and cells lost viability at the same rate as in the control (pH 7.2). We suggest that the stability of gonococci grown at pH 6 is related to increased stability of the outer membrane. The penicillin-enhanced rate of peptidoglycan hydrolysis decreased approximately 50% at pH 6.0. Penicillin-enhanced lysis, peptidoglycan hydrolysis, and loss of viability were also markedly reduced in cells grown at 28 degrees C.

Neisseria gonorrhoeae readily underwent autolysis when suspended in N-2-hydroxyethylpiperazine-N'-2-ethanesulfonic acid (HEPES) buffer at alkaline pH values. Autolysis was inhibited by the addition of Mg2+ or other divalent cations. Autolysis was also suppressed at acid pH (pH 6.0). Suspension of cells in buffer was accompanied by the hydrolysis of peptidoglycan. The rate of peptidoglycan hydrolysis in HEPES buffer was maximal at pH 8.5 and was similar in the presence or absence of Mg2+. Therefore, divalent cation stabilization against autolysis is not mediated by inhibition of peptidoglycan hydrolysis. Peptidoglycan hydrolysis occurred in HEPES buffer (pH 6.0), but at a rate that was 50% of the maximum. Incubation of cells with chloramphenicol or rifampin before suspension in HEPES buffer (pH 8.5) partially prevented autolysis; under these conditions, peptidoglycan hydrolysis still occurred, but at a reduced rate. Old and new peptidoglycans were hydrolyzed at similar rates. Peptidoglycan hydrolysis results in solubilization of both the peptide and glycan moieties.

In humans, gonococcal infection occurs in environments limited with respect to free iron. Neisseria gonorrhoeae produces increased quantities of iron-regulated membrane proteins when grown under in vitro conditions which restrict the availability of free iron. Using sodium dodecyl sulfate-polyacrylamide gel electrophoresis and Western blot (immunoblot) techniques, we studied the reactivity of specific antibodies to the 37-kilodalton (kDa) major iron-regulated protein (MIRP) of gonococci grown under iron-limiting conditions. Antibodies reactive with the 37-kDa MIRP were distinguished from those reactive with protein I by using purified 37-kDa MIRP or gonococcal protein preparations. Acute-phase sera from patients with disseminated gonococcal infection (DGI) reacted strongly to both the 37-kDa MIRP and protein I. Acute sera from nine patients with uncomplicated gonorrhea did not exhibit strong reactivity with the 37-kDa MIRP and were indistinguishable from five control sera. When compared with acute-phase sera, convalescent-phase sera from patients with DGI failed to demonstrate increased reactivity, whereas convalescent-phase sera from one of nine patients with uncomplicated gonorrhea developed reactivity to the 37-kDa MIRP. These data indicate that (i) the 37-kDa MIRP is expressed and antigenic in vivo and (ii) humans with DGI consistently develop a systemic antibody response to the 37-kDa MIRP.

Growth of Neisseria gonorrhoeae strain FA171 in continuous culture under glucose-limiting conditions resulted in a growth-rate-dependent change in the lipopolysaccharide (LPS). The evidence for this change is an alteration in the mobility of purified alkali-treated LPS on sodium dodecyl sulfate-polyacrylamide gels and a quantitative difference in the amount of the LPS serotype antigen. The LPS from cells grown at a low dilution rate (0.12 h-1) contained ca. eightfold less serotype antigen than the LPS from cells grown at a high dilution rate (0.56 h-1). The decrease in LPS serotype antigen was associated with an increase in sensitivity to the bactericidal activity of normal human serum and an increase in cell surface hydrophobicity. An increase in the amount of serotype antigen was associated with a reduction in the accessibility of a monoclonal antibody to a core LPS determinant, an increase in resistance to normal human serum, and a decrease in cell surface hydrophobicity. The microheterogeneity of gonococcal LPS with respect to the content of serotype antigen may result from an alteration in the metabolism of glucose.

Beige mice, which are a homolog of the Chediak-Higashi syndrome, and mice treated with 89Sr to destroy the bone marrow provide animal models of defects in mononuclear phagocyte and natural killer cell functions. The innate resistance of these mice to viruses such as herpes simplex and encephalomyocarditis viruses, however, is normal. Moreover, treatment of the mice with immunomodulators such as Propionibacterium acnes (formerly designated Corynebacterium parvum) and pyran produced a significant increase in resistance to encephalomyocarditis virus. The antiviral effect of P. acnes in 89Sr-treated mice was exhibited during marked monocytopenia and without evidence for an inflammatory influx of macrophages into the peritoneal cavity. Treatment with P. acnes was also effective in increasing the resistance of beige mice to infection with Listeria monocytogenes. Thus, immunomodulators can be effective in mice that exhibit impaired macrophage and natural killer cell functions.