Search

Nanoparticles engineered to combat cancer and other life-threatening diseases may significantly improve patient outcomes. However, inefficient nanoparticle delivery to tumors limits their use and necessitates the development of complex delivery approaches. Here, we examine this issue by harnessing the tumor-homing abilities of human mesenchymal stem cells (MSCs) to deliver a decoupled theranostic complex of rare earth-doped nanoparticles (dNPs) and photosensitizer chlorin e6 (Ce6) to tumors. We show that both bone-marrow- and skin-derived MSCs can transport the dNP-Ce6 complex inside tumor spheroids, which is challenging to accomplish by passive delivery alone. MSCs deliver the dNP-Ce6 complex across the tumor spheroid, facilitating more effective photodynamic damage and tumor destruction than passively accumulated dNP-Ce6. The dNP-Ce6 complex also provides the built-in ability to monitor the MSC migration without causing undesired phototoxicity, which is essential for maximal and side-effect-free delivery of nanoparticles. Our results demonstrate how MSCs can be used as delivery vehicles for the transportation of the dNP-Ce6 complex, addressing the limitations of passive nanoparticle delivery and providing light-based theranostics.

Ag2S nanoparticles are the staple for high-resolution preclinical imaging and sensing owing to their photochemical stability, low toxicity, and photoluminescence (PL) in the second near-infrared biological window. Unfortunately, Ag2S nanoparticles exhibit a low PL efficiency attributed to their defective surface chemistry, which curbs their translation into the clinics. To address this shortcoming, we present a simple methodology that allows to improve the PL quantum yield from 2 to 10%, which is accompanied by a PL lifetime lengthening from 0.7 to 3.8 μs. Elemental mapping and X-ray photoelectron spectroscopy indicate that the PL enhancement is related to the partial removal of sulfur atoms from the nanoparticle’s surface, reducing surface traps responsible for nonradiative de-excitation processes. This interpretation is further backed by theoretical modeling. The acquired knowledge about the nanoparticles’ surface chemistry is used to optimize the procedure to transfer the nanoparticles into aqueous media, obtaining water-dispersible Ag2S nanoparticles that maintain excellent PL properties. Finally, we compare the performance of these nanoparticles with other near-infrared luminescent probes in a set of in vitro and in vivo experiments, which demonstrates not only their cytocompatibility but also their superb optical properties when they are used in vivo, affording higher resolution images.

Lanthanide-doped nanoparticles (LNPs) are speedily colonizing several research fields, such as biological (multimodal) imaging, photodynamic therapy, volumetric encoding displays, and photovoltaics. Yet, the electronic transitions of lanthanide ions obey the Laporte rule, which dramatically hampers their light absorption capabilities. As a result, the brightness of these species is severely restricted. This intrinsic poor absorption capability is the fundamental obstacle for untapping the full potential of LNPs in several of the aforementioned fields. Among others, three of the most promising physicochemical approaches that have arisen during last two decades to face the challenges of increasing LNP absorption are plasmonic enhancement, organic-dye sensitization, and coupling with semiconductors. The fundamental basis, remarkable highlights, and comparative achievements of each of these pathways for absorption enhancement are critically discussed in this minireview, which also includes a detailed discussion of the exciting perspectives ahead.

Trivalent lanthanide ions (Ln3+) are used to prepare a plethora of coordination compounds, with metal–organic frameworks (MOFs) being among the most sought-after in recent years. The porosity of Ln-MOFs is often complemented by the luminescence imparted by the metal centers, making them attractive multifunctional materials. Here, we report a class of three-dimensional (3D) MOFs obtained from a solvothermal reaction between 2,6-naphthalenedicarboxylic acid (H2NDC) and lanthanide chlorides, yielding three types of compounds depending on the chosen lanthanide: [LnCl(NDC)(DMF)] for Ln3+= La3+, Ce3+, Pr3+, Nd3+, Sm3+(type 1), [Eu(NDC)1.5(DMF)]·0.5DMF (type 2), and [Ln2(NDC)3(DMF)2] for Ln3+= Tb3+, Dy3+, Y3+, Er3+, Yb3+(type 3). Photoluminescent properties of selected phases were explored at room temperature. The luminescence thermometry capability of Yb3+-doped Nd-MOF was fully investigated in the 15–300 K temperature range under 365 and 808 nm excitation. To describe the optical behavior of the isolated MOFs, we introduce the total energy-transfer balance model. Therein, the sum of energy-transfer rates is considered along with its dependence on the temperature—the sign, magnitude, and variation of this parameter—permitting to afford a thorough interpretation of the observed behavior of the luminescent species of all materials presented here. The combination of novel theoretical and experimental studies presented herein to describe energy-transfer processes in luminescent materials can pave the way toward the design of MOF-based chemical and physical sensors working in an optical range of interest for biomedical applications.

Mechanical forces control the function of organisms and mediate the interaction between biological systems and their environments. Knowledge of these forces will increase the understanding of biological processes and can support the development of novel diagnostic and therapeutic procedures. Although techniques like atomic force microscopy and droplet insertion method allow measuring forces over a broad range of values, they are invasive and lack versatility. A promising way to overcome these hurdles is luminescent nanomanometry. Quantum dots (QDs) specifically have optical properties that depend on their size because of the quantum confinement, which makes them responsive to applied forces. Yet, a fine understanding of how fundamental parameters affect the response to applied stress is required before a QD family can be credibly proposed as luminescent nanomanometers. Here, a thorough study is conducted on how size and stoichiometry affect the nanomanometry performance of CuInS2QDs. The studied QDs feature pressure‐dependent photoluminescence in the red/near‐infrared range, which can enable the measurement of mechanical forces in the range of physiological relevance in a remote and minimally invasive way. It is shown that tuning size and stoichiometry can simultaneously enhance the CuInS2QDs’ brightness and response to applied pressure, thus providing guidelines for better luminescent nanomanometers. The performance of CuInS2quantum dots as luminescent nanomanometers can be tuned by finely adjusting their size and stoichiometry. Control over these two parameters allows to maximize simultaneously sensitivity to mechanical pressure and brightness of the quantum dots. These observations provide indications for the design of CuInS2‐based nanomanometers with improved sensing performance.

The development and integration of Single-Molecule Magnets (SMMs) into molecular electronic devices continue to be an exciting challenge. In such potential devices, heat generation due to the electric current is a critical issue that has to be considered upon device fabrication. To read out accurately the temperature at the submicrometer spatial range, new multifunctional SMMs need to be developed. Herein, we present the first self-calibrated molecular thermometer with SMM properties, which provides an elegant avenue to address these issues. The employment of 2,2′-bipyrimidine and 1,1,1-trifluoroacetylacetonate ligands results in a dinuclear compound, [Dy2(bpm)(tfaa)6], which exhibits slow relaxation of the magnetization along with remarkable photoluminescent properties. This combination allows the gaining of fundamental insight in the electronic properties of the compound and investigation of optomagnetic cross-effects (Zeeman effect). Importantly, spectral variations stemming from two distinct thermal-dependent mechanisms taking place at the molecular level are used to perform luminescence thermometry over the 5–398 K temperature range. Overall, these properties make the proposed system a unique molecular luminescent thermometer bearing SMM properties, which preserves its temperature self-monitoring capability even under applied magnetic fields.

Growing attention toward optically active materials has prompted the development of novel synthesis methods for a more reliable and efficient access to these systems. In this regard, microwave-assisted approaches provide unique advantages over traditional solvothermal methods reliant on convectional heating: namely, significantly shorter reaction durations, more rigid reaction conditions, and thus a higher degree of reproducibility. Reported herein for the first time is a rapid synthesis of rare-earth (RE3+)-doped LiYF4upconverting and downshifting microparticles with well-defined bipyramidal morphology and good size dispersion via a microwave-assisted solvothermal process. The suggested material growth mechanism identifies a suitable Li+to RE3+ion ratio, an abundance of pH-sensitive acetate surface-capping ligands, and an appropriate reaction temperature/time profile as crucial for enabling a phase transformation of an intermediary yttrium ammonium fluoride phase into LiYF4and subsequent particle ripening. The versatility of the reported method is highlighted by its extension toward the synthesis of other state of the art M(RE)F4(M = alkali metal) optical materials: RE3+-doped LiYbF4microparticles and β-NaGdF4and α-NaYF4nanoparticles. All of the obtained Yb3+/Er3+- and Yb3+/Tm3+-codoped M(RE)F4materials exhibited characteristic upconversion emission, while downshifting capabilities were induced through Ce3+/Tb3+codoping of LiYF4. Further attention was devoted to single-particle optical characterization via hyperspectral imaging of Yb3+/Er3+- and Yb3+/Tm3+-codoped LiYF4microparticles to explore the spatial variability of upconversion emission within individual particles.

In the context of light-mediated tumor treatment, the application of ultraviolet (UV) radiation can initiate drug release and photodynamic therapy. However, its limited penetration depth in tissues impedes the subcutaneous applicability of such radiation. On the contrary, near-infrared (NIR) light is not energetic enough to initiate secondary photochemical processes, but can pierce tissues at a significantly greater depth. Upconverting nanoparticles (UCNPs) unify the advantages of both extremes of the optical spectrum, they can be excited by NIR irradiation and emit UV light through the process of upconversion, effective NIR-to-UV generation being attained with UCNPs as large as 100 nm. However, in anticipation of biomedical applications, the size of UCNPs must be greatly minimized to favor their cellular internalization; yet straightforward size reduction negatively affects the NIR-to-UV upconversion efficiency. Herein, we propose a two-step strategy to obtain small yet bright lithium-based UCNPs. First, we synthesized UCNPs as small as 5 nm by controlling the relative amount of coordinating ligands, namely oleylamine (OM) and oleic acid (OA). Although these UCNPs were chemically unstable, particle coarsening via an annealing process in the presence of fresh OA yielded structurally stable and highly monodisperse sub-10 nm crystals. Second, we grew a shell with controlled thickness on these stabilized cores of UCNPs, improving the NIR-to-UV upconversion by orders of magnitude. Particularly in the case of LiYbF4:Tm3+/LiYF4UCNPs, their NIR-to-UV upconversion surpassed the gold standard 90 nm-sized LiYF4:Tm3+, Yb3+UCNPs. All in all, these UCNPs show great potential within the biomedical framework as they successfully combine the requirements of small size, deep tissue NIR penetration and bright UV emission.

Rare-earth doped nanoparticles (RENPs) are attracting increasing interest in materials science due to their optical, magnetic, and chemical properties. RENPs can emit and absorb radiation in the second biological window (NIR-II, 1000–1400 nm) making them ideal optical probes for photoluminescence (PL) in vivo imaging. Their narrow emission bands and long PL lifetimes enable autofluorescence-free multiplexed imaging. Furthermore, the strong temperature dependence of the PL properties of some of these RENPs makes remote thermal imaging possible. This is the case of neodymium and ytterbium co-doped NPs that have been used as thermal reporters for in vivo diagnosis of, for instance, inflammatory processes. However, the lack of knowledge about how the chemical composition and architecture of these NPs influence their thermal sensitivity impedes further optimization. To shed light on this, we have systematically studied their emission intensity, PL decay time curves, absolute PL quantum yield, and thermal sensitivity as a function of the core chemical composition and size, active-shell, and outer-inert-shell thicknesses. The results revealed the crucial contribution of each of these factors in optimizing the NP thermal sensitivity. An optimal active shell thickness of around 2 nm and an outer inert shell of 3.5 nm maximize the PL lifetime and the thermal response of the NPs due to the competition between the temperature-dependent back energy transfer, the surface quenching effects, and the confinement of active ions in a thin layer. These findings pave the way for a rational design of RENPs with optimal thermal sensitivity.

A new synthesised triphenylamine-based dye having a branched structure with one OH-ending branch able to interact with the surface hydroxyl moieties of mesoporous TiO2is reported. Optical properties of the dye-titania hybrid material are presented and the higher efficiency of the dye on pure anatase TiO2compared to the commercial Degussa P25, which contains a rutile phase component, is confirmed. The optical and chemical properties of the dye make it a promising candidate as a metal-free dye for DSSCs or as a host for a variety of transition or main group metal ions for different applications.

A new synthesised triphenylamine-based dye having a branched structure with one OH-ending branch able to interact with the surface hydroxyl moieties of mesoporous TiO2is reported. Optical properties of the dye-titania hybrid material are presented and the higher efficiency of the dye on pure anatase TiO2compared to the commercial Degussa P25, which contains a rutile phase component, is confirmed. The optical and chemical properties of the dye make it a promising candidate as a metal-free dye for DSSCs or as a host for a variety of transition or main group metal ions for different applications.

Functional colloidal nanoparticles capable of converting between various energy types are finding an increasing number of applications. One of the relevant examples concerns light-to-heat-converting colloidal nanoparticles that may be useful for localized photothermal therapy of cancers. Unfortunately, quantitative comparison and ranking of nanoheaters are not straightforward as materials of different compositions and structures have different photophysical and chemical properties and may interact differently with the biological environment. In terms of photophysical properties, the most relevant information to rank these nanoheaters is the light-to-heat conversion efficiency, which, along with information on the absorption capacity of the material, can be used to directly compare materials. In this work, we evaluate the light-to-heat conversion properties of 17 different nanoheaters belonging to different groups (plasmonic, semiconductor, lanthanide-doped nanocrystals, carbon nanocrystals, and metal oxides). We conclude that the light-to-heat conversion efficiency alone is not meaningful enough as many materials have similar conversion efficiencies─in the range of 80–99%─while they significantly differ in their extinction coefficient. We therefore constructed their qualitative ranking based on the external conversion efficiency, which takes into account the conventionally defined light-to-heat conversion efficiency and its absorption capacity. This ranking demonstrated the differences between the samples more meaningfully. Among the studied systems, the top-ranking materials were black porous silicon and CuS nanocrystals. These results allow us to select the most favorable materials for photo-based theranostics and set a new standard in the characterization of nanoheaters.

The exciting advancements that we are currently witnessing in terms of novel materials and synthesis approaches are leading to the development of colloidal nanoparticles (NPs) with increasingly greater tunable properties. We have now reached a point where it is possible to synthesize colloidal NPs with functionalities tailored to specific societal demands. The impact of this new wave of colloidal NPs has been especially important in the field of biomedicine. In that vein, luminescent NPs with improved brightness and near-infrared working capabilities have turned out to be optimal optical probes that are capable of fast and high-resolution in vivoimaging. However, luminescent NPs have thus far only reached a limited portion of their potential. Although we believe that the best is yet to come, the future might not be as bright as some of us think (and have hoped!). In particular, translation of NP-based fluorescence imaging from preclinical studies to clinics is not straightforward. In this Perspective, we provide a critical assessment and highlight promising research avenues based on the latest advances in the fields of luminescent NPs and imaging technologies. The disillusioned outlook we proffer herein might sound pessimistic at first, but we consider it necessary to avoid pursuing “pipe dreams” and redirect the efforts toward achievable—yet ambitious—goals.

Optical coherence tomography (OCT) is an imaging technique affording noninvasive optical biopsies. Like for other imaging techniques, the use of dedicated contrast agents helps better discerning biological features of interest during the clinical practice. Although bright OCT contrast agents have been developed, no dark counterpart has been proposed yet. Herein, plasmonic copper sulfide nanoparticles as the first OCT dark contrast agents working in the second optical transparency window are reported. These nanoparticles virtually possess no light scattering capabilities at the OCT working wavelength (≈1300 nm); thus, they exclusively absorb the probing light, which in turn results in dark contrast. The small size of the nanoparticles and the absence of apparent cytotoxicity support the amenability of this system to biomedical applications. Importantly, in the pursuit of systems apt to yield OCT dark contrast, a library of copper sulfide nanoparticles featuring plasmonic resonances spanning the three optical transparency windows is prepared, thus highlighting the versatility and potential of these systems in light‐controlled biomedical applications. Copper sulfide nanoparticles with localized plasmonic resonance in the second optical transparency window are synthesized via thermolysis of copper complexes. The prominent absorption character of their extinction cross section, along with small size and lack of apparent cytotoxicity make them ideal candidates to unprecedently achieve dark contrast in optical coherence tomography.