Search

We report a photolithography‐based technology for patterning quantum dot color converters for micro‐LED displays. A patterning resolution of ~1 µm is achieved. The method can be applied to any color converter materials. Integration of perovskite quantum dots and CdSe/ZnS quantum dots is demonstrated to show the versatility of the technology.

Metal halide perovskite light-emitting diodes (PeLEDs) have experienced a rapid advancement in the last several years with the external quantum efficiencies (EQEs) reaching over 20%, comparable to the state-of-the-art organic LEDs and quantum dot LEDs. The photoluminescence quantum yields of perovskite films have also been approaching 100%. Therefore, the next step to improving the EQE of PeLEDs should be focused on boosting light extraction. In this Letter, we demonstrate the emitter dipole orientation as a key parameter in determining the outcoupling efficiency of PeLEDs. We find that the CsPbBr_3 emitter has a slightly preferred orientation with the horizontal-to-vertical dipole ratio of 0.41:0.59, as compared to 0.33:0.67 in the isotropic case. A theoretical analysis predicts that a purely anisotropic perovskite emitter may result in a maximum EQE of 36%.

Perovskite light-emitting diodes (PeLEDs) have undergone rapid development in the last several years with external quantum efficiencies (EQEs) reaching over 21%. However, most PeLEDs still suffer from severe efficiency roll-off (droop) at high injection current densities, thus limiting their achievable brightness and presenting a challenge to their use in laser diode applications. In this work, we show that the roll-off characteristics of PeLEDs are affected by a combination of charge injection imbalance, nonradiative Auger recombination, and Joule heating. To realize ultrabright and efficient PeLEDs, several strategies have been applied. First, we designed an energy ladder to balance the electron and hole transport. Second, we optimized perovskite materials to possess reduced Auger recombination rates and improved carrier mobility. Third, we replaced glass substrates with sapphire substrates to better dissipate joule heat. Finally, by applying a current-focusing architecture, we achieved PeLEDs with a record luminance of 7.6 Mcd/m2. The devices can be operated at very high current densities (J) up to ∼1 kA/cm2. Our work suggests a broad application prospect of perovskite materials for high-brightness LEDs and ultimately a potential for solution-processed electrically pumped laser diodes.

Metal halide perovskites are emerging as attractive materials for light-emitting diode (LED) applications. The external quantum efficiency (EQE) has experienced a rapid progress and reached over 21%, comparable to the state of the art organic and quantum dot LEDs. For metal halide perovskites, their simple solution-processing preparation, facile band gap tunability, and narrow emission line width provide another attractive route to harness their superior optoelectronic properties for multicolor display applications. In this work, we demonstrate a high-resolution, large-scale photolithographic method to pattern multicolor perovskite films. This approach is based on a dry lift-off process which involves the use of parylene as an intermediary and the easy mechanical peeling-off of parylene films on various substrates. Using this approach, we successfully fabricated multicolor patterns with red and green perovskite pixels on a single substrate, which could be further applied in liquid crystal displays (LCDs) with blue backlight. Besides, a prototype green perovskite micro-LED display under current driving has been demonstrated.

Multi-functional optical manipulations, including optical trapping and transporting of subwavelength particles, are proposed using the Bloch modes in a dielectric photonic structure. We show that the Bloch modes in a periodic structure can generate a series of subwavelength trapping wells that are addressable by tuning the incident wavelength. This feature enables efficient optical trapping and transportation in a peristaltic way. Since we are using the guiding Bloch mode in a dielectric structure, rather than using plasmonic or dielectric resonant cavities, these operations are wide band and free from joule loss. The Bloch mode in a simple periodic dielectric structure provides a new platform for multi-functional optical operations and may find potential applications in nanophotonics and biomedicine.

The ability to manipulate quantum dot (QD) surfaces is foundational to their technological deployment. Surface manipulation of metal halide perovskite (MHP) QDs has proven particularly challenging in comparison to that of more established inorganic materials due to dynamic surface species and low material formation energy; most conventional methods of chemical manipulation targeted at the MHP QD surface will result in transformation or dissolution of the MHP crystal. In previous work, we have demonstrated record-efficiency QD solar cells (QDSCs) based on ligand-exchange procedures that electronically couple MHP QDs yet maintain their nanocrystalline size, which stabilizes the corner-sharing structure of the constituent PbI64–octahedra with optoelectronic properties optimal for solar energy conversion. In this work, we employ a variety of spectroscopic techniques to develop a molecular-level understanding of the MHP QD surface chemistry in this system. We individually target both the anionic (oleate) and cationic (oleylammonium) ligands. We find that atmospheric moisture aids the process by hydrolysis of methyl acetate to generate acetic acid and methanol. Acetic acid then replaces native oleate ligands to yield QD surface-bound acetate and free oleic acid. The native oleylammonium ligands remain throughout this film deposition process and are exchanged during a final treatment step employing smaller cations—namely, formamidinium. This final treatment has a narrow processing window; initial treatment at this stage leads to a more strongly coupled QD regime followed by transformation into a bulk MHP film after longer treatment. These insights provide chemical understanding to the deposition of high-quality, electronically coupled MHP QD films that maintain both quantum confinement and their crystalline phase and attain high photovoltaic performance.

Cell manipulation is one of the most impactful applications for optical tweezers, and derived from this promise, we demonstrate a new optical tweezers system for the study of cell adhesion and organization. This method utilizes photonic-crystal-enhanced optical tweezers to manipulate cells with low laser intensities. By doing so, it enables effective cell patterning and culturing within the conditions necessary for successful differentiation and colony formation of human pluripotent stem cells. To this end, the biocompatibility of plasma-treated parylene-C for cell culturing was studied, and a thorough characterization of cellular interactive forces was performed using this system. Furthermore, this study also demonstrates construction of patterned cell arrays at arbitrary positions with micrometer-scale precision.

A critical event during kidney organogenesis is the differentiation of podocytes, specialized epithelial cells that filter blood plasma to form urine. Podocytes derived from human pluripotent stem cells (hPSC‐podocytes) have recently been generated in nephron‐like kidney organoids, but the developmental stage of these cells and their capacity to reveal disease mechanisms remains unclear. Here, we show that hPSC‐podocytes phenocopy mammalian podocytes at the capillary loop stage (CLS), recapitulating key features of ultrastructure, gene expression, and mutant phenotype. hPSC‐podocytes in vitro progressively establish junction‐rich basal membranes (nephrin+podocin+ZO‐1+) and microvillus‐rich apical membranes (podocalyxin+), similar to CLS podocytes in vivo. Ultrastructural, biophysical, and transcriptomic analysis of podocalyxin‐knockout hPSCs and derived podocytes, generated using CRISPR/Cas9, reveals defects in the assembly of microvilli and lateral spaces between developing podocytes, resulting in failed junctional migration. These defects are phenocopied in CLS glomeruli of podocalyxin‐deficient mice, which cannot produce urine, thereby demonstrating that podocalyxin has a conserved and essential role in mammalian podocyte maturation. Defining the maturity of hPSC‐podocytes and their capacity to reveal and recapitulate pathophysiological mechanisms establishes a powerful framework for studying human kidney disease and regeneration. StemCells2017;35:2366–2378 Comparison of stem cell‐derived human kidney organoids in vitro with genetic mouse models in vivo reveals that podocytes (red), the filtering cells of the kidney, undergo apical‐to‐basal junctional migration at the capillary loop stage. A critical player in this process is podocalyxin, which induces negatively charged microvilli between neighboring podocytes, pushing them apart.

Fluorescent silicon quantum dots (SiQDs) have shown a great potential as antiphotobleaching, nontoxic and biodegradable labels for various in vitro and in vivo applications. However, fabricating SiQDs with high water-solubility and high photoluminescence quantum yield (PLQY) remains a challenge. Furthermore, for targeted imaging, their surface chemistry has to be capable of conjugating to antibodies, as well as sufficiently antifouling. Herein, antibody-conjugated SiQD nanoparticles (SiQD-NPs) with antifouling coatings composed of bovine serum albumin (BSA) and polyethylene glycol (PEG) are demonstrated for immunostaining on live cancer cells. The monodisperse SiQD-NPs of diameter about 130 nm are synthesized by a novel top-down method, including electrochemical etching, photochemical hydrosilylation, high energy ball milling, and “selective-etching” in HNO3and HF. Subsequently, the BSA and PEG are covalently grafted on to the SiQD-NP surface through presynthesized chemical linkers, resulting in a stable, hydrophilic, and antifouling organic capping layer with isothiocyanates as the terminal functional groups for facile conjugation to the antibodies. The in vitro cell viability assay reveals that the BSA-coated SiQD-NPs had exceptional biocompatibility, with minimal cytotoxicity at concentration up to 1600 μg mL–1. Under 365 nm excitation, the SiQD-NP colloid emits bright reddish photoluminescence with PLQY = 45–55% in organic solvent and 5–10% in aqueous buffer. Finally, through confocal fluorescent imaging and flow cytometry analysis, the anti-HER2 conjugated SiQD-NPs show obvious specific binding to the HER2-overexpressing SKOV3 cells and negligible nonspecific binding to the HER2-nonexpressing CHO cells. Under similar experimental conditions, the immunofluorescence results obtained with the SiQD-NPs are comparable to those using conventional fluorescein isothiocyanate (FITC).

This paper describes an endoscopic-inspired imaging system employing a micro-electromechanical system (MEMS) micromirror scanner to achieve beam scanning for optical coherence tomography (OCT) imaging. Miniaturization of a scanning mirror using MEMS technology can allow a fully functional imaging probe to be contained in a package sufficiently small for utilization in a working channel of a standard gastroesophageal endoscope. This work employs advanced image processing techniques to enhance the images acquired using the MEMS scanner to correct non-idealities in mirror performance. The experimental results demonstrate the effectiveness of the proposed technique.

We present a novel design for an endoscopic imaging catheter utilizing diffractive optics for ultrahigh-resolution optical coherence tomography (OCT) imaging at 800 nm. A diffractive microlens was developed to alleviate severe chromatic aberration when a broadband light source was employed at the 800 nm wavelength range. Combined with a home-built fiber rotary joint and a broadband Ti:sapphire laser, the imaging catheter achieved a lateral resolution of 6.2 μm and an axial resolution of 3.0 μm in air. The performance of the catheter was demonstrated by three-dimensional full-circumferential endoscopic OCT imaging of guinea pig esophagus in vivo.

Stimulating cells by using light is a non-invasive technique that provides flexibility in probing different locations while minimizing unintended effects on the system. We propose a new way to make cells photosensitive without using genetic or chemical manipulation, which alters natural cells, in conjunction with Quantum Dots (QDs). Remote switching of cellular activity by optical QD excitation is demonstrated by integrating QDs with cells: CdTe QD films with prostate cancer (LnCap) cells, and CdSe QD films and probes with cortical neurons. Changes in membrane potential and ionic currents are recorded by using the patch-clamp method. Upon excitation, the ion channels in the cell membrane were activated, resulting in hyperpolarization or depolarization of the cell.

We demonstrate wavelength-tunable, air-stable and nontoxic phosphor materials based on silicon quantum dots (SiQDs). The phosphors, which are composed of micrometer-size silicon particles with attached SiQDs, are synthesized by an electrochemical etching method under ambient conditions. The photoluminescence (PL) peak wavelength can be controlled by the SiQD size due to quantum confinement effect, as well as the surface passivation chemistry of SiQDs. The red-emitting phosphors have PL quantum yield equal to 17%. The SiQD-phosphors can be embedded in polymers and efficiently excited by 405 nm light-emitting diodes for potential general lighting applications.

We propose a new approach to experimentally determine the spatial resolution of nanogap quantum dot (QD) photodetectors consist of solution-processed QDs. Cross talk between a pair of closely positioned QD photodetectors was measured. Devices with 200 nm spacing exhibit low crosstalk of 8.4%. A single QD photodetector also shows high sensitivity, with a lowest detectable optical intensity of 95.3  fW/μm^2 achieved. The results show the potential of nanogap QD photodetectors for applications in high-density imaging/sensing arrays.

A new approach is proposed for manipulating and rotating micro- or nano-objects by using polarized laser light with low intensity. The polarized light excites resonant dipoles on a cap-shaped Au nanoparticle array, which generates a highly nonuniform radiation field that induces large dielectrophoresis force on dielectric objects. The orientation control of the objects is realized by adjusting the polarization direction of the incident light. Theoretical modeling, fabrication, and characterization results for the cap-shaped Au nanoparticle array, as well as preliminary trapping results, are reported.

We present cross-talk calculations for a subdiffraction nanophotonic waveguide that consists of a colloidal quantum dot (QD) array 10 nm in diameter and compare the results with conventional continuous dielectric waveguides, assuming the same 10 nm size as well as a 200 nm cutoff diameter for guided mode. We find that the QD cascade has much lower cross talk than 10 nm dielectric waveguides at an identical separation >30 nm. Moreover, results for 200 nm dielectric waveguides at a 280 nm gap are comparable with those of QD structures spaced 110 nm apart. Hence the proposed QD device is potentially superior to conventional waveguides in achieving lower cross talk in the subdiffraction regime and provides a new route to achieving high-density photonic integrated circuits.